Construction of New Administrative Building at Jamanagiri, Dhule Tal.Dist.Dhule

Amount

Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 meter beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting et-cetra complete. (Lift upto 1.5 meter) By Mechanical Means.

Excavation for foundation in hard murum including removing the excavated material upto distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting et-cetra complete. (Lift upto 1.50 meter) By Mechanical Means.

Excavation for foundation in hard murum and boulders including removing the excavated material up to a distance 50 metres, beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting et-cetra complete. (Lift upto 1.5 meter) By Mechanical Means.

Excavation for roadway in earth, soil of all sorts, sand, gravel or soft murum including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50 meter and spreading for embankment or stacking as directed.

Excavation for catch or side water gutter in all sorts of soils to the specified section including stacking the excavated stuff in a regular bund and disposing of unsuitable or excess stuff as directed all sorts of soils.

Providing preconstructional antitermite treatment as per Indian Standard 6313 (Part-II) by treating the bottom surface and sides of excavation at the rate of 5 litres of emulsion concentrate of 1.0 percent of chlorophyrifos per square meter of surface area covering 10 years guarantee on bond paper.

Providing preconstructional antitermite treatment as per Indian Standard 6313 (Part-II) by treating the top surface of plinth filling at the rate of 5 litres of emulsion concentrate at 1.0 percent of clorophyrifos per square metre of surface area covering ten years guarantee on bond paper.

Providing antitermite treatment around the periphery of the existing building as per Indian Standard 6313 (Part-III) by excavating trenches of 20 centimeter width and exposing the sides of columns and plinth beams upto a depth of 300 milimeter and injecting one percent of chlorodane emulsion concentrate at the rate of 2.25 litres per One Running Metre and refilling the trenches et-cetra complete covering 2 years guarantee on bond paper.

Providing expansion joints in reinforced cement concrete framed structure (interior columns) with plain premoulded filler with confirming to Indian Standard 1838,1961, 25 milimeter thick with 75 milimeter wide and 1 milimeter thick stainless steel plate finishing et-cetra complete as directed Bd K 1 A

[B] FIRST FLOOR

[C] SECOUND FLOOR

Providing expansion joints in Reinforced Cement Concrete framed structure (at floor level) with plain premoulded filler 25 milimeter thick with 75 milimeter wide and 1 milimeter thick stainless steel plat and finishing etc. complete.

[B] FIRST FLOOR

Providing expansion joints in Reinforced Cement Concrete framed structure (at floor level) with plain premoulded filler 25 milimeter thick with 75 milimeter wide and 1 milimeter thick stainless steel plat and finishing et-cetra complete. [C] SECOUND FLOOR

Providing dry or trap or granite or quartzite or gneiss rubble stone soling 15 centimeter to 20 centimeter thick including hand packing and compacting et-cetra complete.

Providing and laying Cast in situ or Ready Mix cement concrete in Mix-10 of trap metal for foundation and bedding including bailing out water, Steel centering, formwork, laying or pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based Programmable Logic Controller with Supervisory control and data acquisition enabled reversible Drum Type mixer or concrete Batch mix plant (Pan mixer) et-cetra complete. With fine aggregate (Natural Sand or Crushed sand Vertical Shaft Impact Grade finely washed et-cetra)

Providing and laying Cast in situ or Ready Mix cement concrete Mix-30 of trap metal for Reinforced Cement Concrete work in foundations like raft, strip foundations, grillage and footings of Reinforced Cement Concrete columns and steel stanchions et-cetra columns as per detailed designs and drawing or as directed including Steel centering formwork, cover blocks laying or pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing et-cetra complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based Programmable Logic Controller with Supervisory control and data acquisition enabled reversible Drum Type mixer or concrete Batch mix plant (Pan mixer) et-cetra complete. With fine aggregate (Crushed sand Vertical Shaft Impact Grade).

Providing and laying in situ or Ready Mix cement concrete Mix-20 of trap metal for Reinforced Cement Concrete work in foundations like raft, strip foundations, grillage and footings of Reinforced Cement Concrete columns and steel stanchions et-cetra including bailing out water, Steel centering formwork, laying or pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) et-cetra complete, with fully automatic micro processor based Programmable Logic Controller with Supervisory control and data acquisition enabled reversible Drum Type mixer or concrete Batch mix plant (Pan mixer) et-cetra complete. With fine aggregate (Natural Sand or Crushed sand Vertical Shaft Impact Grade finely washed et-cetra)

Providing and laying Cast in situ or Ready Mix cement concrete Mix-30 of trap metal for Reinforced Cement Concrete columns as per detailed designs and drawing or as directed including steel centering, formwork,cover blocks, laying or pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing et-cetra complete,(Excluding reinforcement and structural steel). with fully automatic micro processor based Programmable Logic Controller with Supervisory control and data acquisition enabled reversible Drum Type mixer or concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand Vertical Shaft Impact Grade)

[B] FIRST FLOOR

[C] SECOUND FLOOR

Providing and laying Cast in situ or Ready Mix cement concrete Mix-20 of trap metal for Reinforced Cement Concrete columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying or pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing et-cetra complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based Programmable Logic Controller with Supervisory control and data acquisition enabled reversible Drum Type mixer or concrete Batch mix plant (Pan mixer) et-cetra complete. With fine aggregate (Crushed sand Vertical Shaft Impact Grade)

Providing and laying Cast in situ or Ready Mix cement concrete Mix-30 of trap metal for Reinforced Cement Concrete beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing et-cetra complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based Programmable Logic Controller with Supervisory control and data acquisition enabled reversible Drum Type mixer or concrete Batch mix plant (Pan mixer) et-cetra complete. With fine aggregate (Crushed sand Vertical Shaft Impact Grade).

[B] FIRST FLOOR

[C] SECOUND FLOOR

Providing and laying Cast in situ or Ready Mix cement concrete Mix-20 of trap metal for Reinforced Cement Concrete beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying or pumping, compactionand roughening the surface if special finish is to be provided and curing et-cetra complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based Programmable Logic Controller with Supervisory control and data acquisition enabled reversible Drum Type mixer or concrete Batch mix plant (Pan mixer) et-cetra complete. With fine aggregate (Crushed sand Vertical Shaft Impact Grade)

Providing second class Burnt Brick masonry with conventional or Indian Standard type bricks in cement mortar 1:6 in foundations and plinth of inner walls or in plinth external walls including bailing out water manually , striking joints on unexposed faces, raking out joints on exposed faces and watering et-cetra Complete.

Providing and laying Cast in situ or Ready Mix cement concrete Mix-15 of trap or granite or quartzite or gneiss metal for coping to plinth or parapet, moulded or chamfered as per drawing or as directed including steel centering, plywood or steel formwork compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing et-cetra complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin et-cetra (Wooden centering will not be allowed.) With fine aggregate (Natural Sand or Crushed sand Vertical Shaft Impact Grade finely washed et-cetra)

[B] FIRST FLOOR

[C] SECOUND FLOOR

Filling in plinth and floors with approved excavated material in 15 centimeter to 20 centimeter layers including watering and compacting et-cetra complete.

Filling in plinth and floors with contractors material or brought from outside and approved by Engineer incharge in layers of 15 centimeter to 20 centimeter including watering and compaction et-cetra complete.

Providing and laying Cast in situ or Ready Mix cement concrete Mix-30 of trap metal for Reinforced Cement Concrete slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing et-cetra complete,(Excluding reinforcement and structural steel). with fully automatic micro processor based Programmable Logic Controller with Supervisory control and data acquisition enabled reversible Drum Type mixer or concrete Batch mix plant (Pan mixer) et-cetra complete. With fine aggregate (Crushed sand Vertical Shaft Impact Grade)

[B] FIRST FLOOR

[C] SECOUND FLOOR

Providing and laying Cast in situ or Ready Mix cement concrete Mix-20 of trap metal for Reinforced Cement Concrete slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing et-cetra complete, (Excluding reinforcement and structural steel). with fully automatic micro processor based Programmable Logic Controller with Supervisory control and data acquisition enabled reversible Drum Type mixer or concrete Batch mix plant (Pan mixer) et-cetra complete. With fine aggregate (Natural Sand or Crushed sand Vertical Shaft Impact Grade finely washed et-cetra)

Providing and laying Cast in situ or Ready Mixcement concrete Mix-25 of trap metal for Reinforced Cement Concrete chajja as per detailed design and drawings including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based Programmable Logic Controller with Supervisory control and data acquisition enabled reversible Drum Type mixer or concrete Batch mix plant (Pan mixer) et-cetra complete. With fine aggregate (Crushed sand Vertical Shaft Impact Grade)

[B] FIRST FLOOR

[C] SECOUND FLOOR

Providing and laying Cast in situ or Ready Mixcement concrete Mix-20 of trap metal for Reinforced Cement Concrete chajja as per detailed design and drawings including steel centering, formwork, cover blocks, laying or pumping, compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based Programmable Logic Controller with Supervisory control and data acquisition enabled reversible Drum Type mixer or concrete Batch mix plant (Pan mixer) et-cetra complete. With fine aggregate (Crushed sand Vertical Shaft Impact Grade)

Providing and laying Cast in situ or Ready Mix cement concrete in Mix-25 of trap or granite pt quartzite or gneiss metal for Reinforced Cement Concrete pardi of required thickness including steel centering, formwork, cover blocks, laying or pumping, compacting and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel) with fully automatic micro processor based Programmable Logic Controller with Supervisory control and data acquisition enabled reversible Drum Type mixer or concrete Batch mix plant (Pan mixer) et-cetra complete. With fine aggregate (Crushed sand Vertical Shaft Impact Grade)

[B] FIRST FLOOR

[C] SECOUND FLOOR

Providing and laying Cast in situ or Ready Mix cement concrete in Mix-20 of trap metal for Reinforced Cement Concrete pardi of required thickness including steel centering, formwork, cover blocks, laying or pumping, compacting , curing , finishing and rougheningthem if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based Programmable Logic Controller with Supervisory control and data acquisition enabled reversible Drum Type mixer or concrete Batch mix plant (Pan mixer) et-cetra complete. With fine aggregate (Crushed sand Vertical Shaft Impact Grade)

Providing and laying Cast in situ or Ready Mix cement concrete in Mix-25 of trap metal for Reinforced Cement Concrete Waist slab, and steps of staircases as per detailed design and drawings or as directed including steel centering, plywood or steel formwork, steel props, laying or pumping, compaction, finishing uneven and honeycombed surface with Cement Mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing et-cetra complete. (Excluding einforcement, including cover block). (Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin et-cetra) with fully automatic micro processor based Programmable Logic Controller with Supervisory control and data acquisition enabled reversible Drum Type mixer or concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand Vertical Shaft Impact Grade)

[B] FIRST FLOOR

[C] SECOUND FLOOR

Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap/ granite/ quartzite/ gneiss metal for Reinforced Cement Concretecoping to plinth or parapet and sill of doors and windows moulded as per detailed drawings or chamfered as approved by the Engineer including steel centering, formwork, cover blocks, laying/pumping, compacting , curing , finishing and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based Programmable Logic Controller with Supervisory control and data acquisition enabled reversible Drum Type mixer or concrete Batch mix plant (Pan mixer) et-cetra complete. With fine aggregate (Crushed sand Vertical Shaft Impact Grade)

Providing and fixing during laying in Reinforced Cement Concrete Slab rectangular 2 milmeter thick Mild Steel sheet fan hook box of size 180x100 milmeter with required depth with holes or notches as required, bottom and top sides of 1.6 milmeter Mild Steel sheet fixed with 3.5 milmeter diameter round headed screws together with 12 milmeter diameter Mild Steel bar bent to shape with hooked ends for fan hook and painting to exposed surface.

[B] FIRST FLOOR

[C] SECOUND FLOOR

Construction of dry lean cement concrete Sub- base over a prepared sub-grade with coarse and fine aggregate ( natural sand or Vertical Shaft Impact grade finely washed crushed sand) conforming to Indian Standard: 383, the size of coarse aggregate not exceeding 25 milimeter, cement content not to be less than 150 kilogram per cubic meter, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mega Pascal at 7 days, mixed in a batching plant or Weigh batch mixer, transported to site with all leads and lifts, laid with a paver with electronic sensor or by suitable means as approved by Engineer-in-charge , compacting with vibratory roller, finishing, curing and including preparation of sub-grade surface if required et-cetra complete. with fully automatic micro processor based Programmable Logic Controller with Supervisory control and data acquisition enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) et-cetra complete.

Providing and laying in situ or ready mix Mix-20 cement concrete of trap metal for approach slab or Rigid pavement including compacting, finishing, curing etc. complete. (excluding reinforcement) (with reversible drum type mixer or concrete batch mix plant (pan mixer) with Supervisory control and data acquisition with fine agreegates of required specifications (Natural sand or Vertical Shaft Impact sand finely washed et-cetra), cement 6.40 bags per cubic meter)

Providing and fixing in position Thermo Mechanically Treated Ferrous - 500 bar reinforcement of various diameters for Reinforced Cement Concrete pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches et-cetra as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.

[B] FIRST FLOOR

[C] SECOUND FLOOR

Providing structural steel work in hollow section of various thickness and sizes in square, rectanular and round shape from 25 milimeter to 450 milimeter section as per Indian Standard 4923 YST 310 Grade produced from iron ore and blast furnace route et-cetra as per detailed designs and drawing or as directed including cutting, fabricating, hoisting, erecting, fixing in position, making riveted or bolted or welded connections and painting complete.

[C] SECOUND FLOOR

Providing and fixing corrugated galvanised iron sheets of 0.63 milimeter thick (24 Birmingham Wire Gauge) for roofing without wind tiles including fastening with galvanised iron screws and bolts, lead and bitumen washers as per drawing et-cetra complete. (Weight of 5.5 Kilogram or square meter)

Supply and Installation of Dpi Flux translucent roof with standing seam multicell polycarbonate panel system. The system with complete assembly of co extruded UV protected multicell panels incorporated into a complete system. Co-extruded UV protected polycarbonate panel system of min 16 milimeter thick of 1200 milimeter (min.) width with angular daylighting concept. Panels shall have minimum seven layers in a truss bridge design for higher flexibility and strength. Panels with opaque and translucent clear combination as per required lux level and design requirements with all fixing accessories to ensure best performance for wind uplift, vibration, oil canning and visual appearance. Panels shall have an additional IR Blocking features for enhance thermal comfort. Panels shall be manufactured with vertical standing seam at both sides of the panel. Panels shall be fixed on Purlin with snap on connectors with double tooth grip lock locking mechanism and will be secured on MS structure (will be paid Separately) with 3 One Numbers self- drilling screws and trapezoid SS fasteners holding the base of the standing seam offering best stability having a pull-out load of min. 7000N (7KN) tested as per ISO 6892:1998 and Indian Standard 1608: 2005, as per design requirement. Panels must satisfy Dart drop impact test as per Indian Standard 14443-97 shall show no sign of breakage on Polycarbonate sheets which have been exposed to UV for a min. of 500 Hours as per ASTM G 155. Panels shall not have Yellowness Index as per ASTM D 1925 of 15 units when tested on a sample exposed to UV for 500 Hours as per ASTM G 155. U value shall not be more than 1.9 W/m2K as per EN ISO 10077-2:2018. Panel shall be with additional End cap or Aluminium U/F profile or Glazing Bar for ends as required. Panel shall be fixed over Mild Steel structural steel or Mild Steel purlin (paid separately) conforming to the detail technical specifications as per approved architectural drawings. Trained and factory authorized labour with supervision to complete the entire panel installation as per drawing and direction of the engineer in charge. Colour: As per approval The 16 milimeter thick panels shall be used for a roofing height of upto 15 meters. [C] SECOUND FLOOR

Providing second class Burnt Brick masonry with conventional or Indian Standard type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding et-cetra Complete.

[B] FIRST FLOOR

[C] SECOUND FLOOR

Providing second class Burnt Brick masonry with conventional or Indian Standard type bricks in cement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of 2 bars of 6 milmeter diameter or 2 hoop iron strips 25 milmeter X 1.6 milmeter placed at every third course, properly bent and bonded at ends scaffolding, racking out joints and watering et-cetra complete.

[B] FIRST FLOOR

[C] SECOUND FLOOR

Providing cement based water proofing treatment to terraces (Indian water proofing or alike) with brick bats laid in required slope to drain the water for any span after cleaning the base surface. Applying a coat of cement slurry admixed with approved water proofing compound and laying the brick bats on bottom layer in Cement Mortar 1:5 admixed with approved water proofing compound filling up to half depth of brick bats, curing this layer for 3 days, applying cement slurry over this layer joints of brick bats with Cement Mortar 1:3 admixed with approved water proofing compound and finally top finishing with average 20 milmeter thick layers of same mortar added with jute fiber at 1 Kilogramper bag including finishing the surface smooth with cement slurry admixed with approved water proofing compound. Marking finished surface with false squares of 300 milmeter x 300 milmeter making the junctions at the parapet rounded and tapered top for required height, with drip mould at the junction of plaster and parapet and curing and covering 10 years Guarantee against leakproofness on Court fee stamp paper of Rs. 500/- including ponding test et-cetra complete.

[B] FIRST FLOOR

[C] SECOUND FLOOR

Providing water proof bedding for flooring of Bath and Water Closet 25 milmeter thick in Cement Mortar 1:3 including using approved water proofing compound in specified proportion as per manufacturers specifications for per bag of cement including leveling, curing and covering 10 years guarantee on court fee stamp paper of Rs.500/- including ponding test et-cetra complete.

[B] FIRST FLOOR

[C] SECOUND FLOOR

Providing and fixing 20 to 25 milimeter thick rough shahabad box type waterproofing for basement or underground floor on a base of Cement concrete 1:3:6, including sub base of 2.50 centimeter thick Cement mortar 1:3 with conceal, secrete (RMW), Algae proof or other alike waterproofing liquids, raking of joints upto 35 milimeter depth, filling the joints with 6 milimeter size crushed metal, hand grouting with cement slurry, curing and cleaning, with 7 years guarantee on court fee stamp of Rupes 100/- with ponding test et-cetra complete. (excluding Cement concrete 1:3:6 base concrete )

Providing and fixing 20 to 25 milimeter thick rough shahabad box type waterproofing treatment to vertical outside faces of Reinforced Cement concrete walls of basement or underground floor including filling the gap of 25 milimeter between rough shahabad and Reinforced Cement Concrete walls with cement grout mixed with water proofing liquid Algae proof or other alike with one tile lift method, brushing the joints horizontally with cement slurry mixed with water proofing liquid for width 30 to 35 milimeter and sloping coping over topmost tile with cement mortar 1:3, butting the bottom most with Cement concrete 1:2:4 mixed with water proofing liquid, curing, with 7 years guarantee on court fee stamp of Rupees 100/- with ponding test et-cetra complete. (excluding Cement concrete 1:3:6 base concrete).

Providing and fixing of imported clay tiles pn Mild Steel frame Work using Maditerranean plus roof tiles of Wienberger tile of colour Red Engobe or equivalent with necessary accessories required to fix tile including clips and screw (Prior permission of Superintending Engineer is to be obtained before inclusion)

[B] FIRST FLOOR

[C] SECOUND FLOOR

Providing and applying Two coats of wall care Putty on plastered surface and Ceiling and Walls to prepare surface even and smooth of approved make, et-cetra complete.

[B] FIRST FLOOR

[C] SECOUND FLOOR

Providing internal cement plaster 12 milmeter thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing et-cetra complete.

[B] FIRST FLOOR

[C] SECOUND FLOOR

Providing neeru finish to plastered surfaces in all positions including scaffolding and curing et-cetra complete.

[B] FIRST FLOOR

[C] SECOUND FLOOR

Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 milmeter thick in cement mortar 1:4 using waterproofing compound at 1 kilograme per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 milmeter thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding et-cetracomplete.

[B] FIRST FLOOR

[C] SECOUND FLOOR

Providing fine cement finish 1.5 milmeter thick over green plaster surface including scaffolding curing et-cetra complete.

Providing and fixing chicken mesh of 22 gauge, with about 30 centimeter width at the junction of Reinforced Cement Concrete members and brick work, of approved quality including fixing mesh in position by necessary drilling in concrete or Burn Brick masonry and or tying by binding wire et-cetra complete.

[B] FIRST FLOOR

[C] SECOUND FLOOR

Providing and laying ceramic tiles having size 30 centimeter x 60 centimeter confirming to corresponding Indian Standard for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white or colour cement slurry cleaning curing et-cetra complete.

[B] FIRST FLOOR

[C] SECOUND FLOOR

Providing and laying in position flooring of telephone black or Amba White or Cat bary brown or Ruby red or Ocean Brown granite stone of approved shade and size 18 milimeter to 20 milimeter thick on bed 1:6 cement mortar including cement floats striking joints, pointing in Cement Mortar 1:3 curing and cleaning et-cetra complete.

[B] FIRST FLOOR

[C] SECOUND FLOOR

Providing and laying chequered tiles of approved quality of size 30 centimeter x 30 centimeter, confirming to corresponding Indian Standard for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with cement slurry cleaning curing et-cetra complete.

Providing and fixing machine cut machine polished 18 milmeter to 20 milmeter thick telephone black or Amba White or Cat bary brown or RBI red or Ocean Brown granite stone for treads and risers of steps and staircases of approved colour and shade with rounded moulding and three grooved line for the treads on bed of 1:4 Cement mortar including float filling joints with neat cement slurry curing polishing and cleaning et-cetra complete.

[B] FIRST FLOOR

[C] SECOUND FLOOR

Providing and fixing machine cut mirror polished 18 milimeter to 20 milimeter thick telephone black or Amba White or Cat bary brown or RBI red or Ocean Brown granite stone partition with full moulding the edges et-cetra complete. One side polish.

[B] FIRST FLOOR

[C] SECOUND FLOOR

Providing and laying vitrified mirror or glossy finish tiles decorative type having size 590 milimeter to 605 milimeter x 590 milimeter to 605 milimeter of 8 to 10 milimeter thickness and confirming to Indian Standard 15622-2006 ( group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing et-cetra complete.

[B] FIRST FLOOR

[C] SECOUND FLOOR

Providing and laying vitrified mirror or glossy finish tiles having size 590 milimeter to 605 milimeter x 590 milimeter to 605 milimeter of 8 to 10 milimeter thickness and confirming to Indian Stamdard 15622-2006 ( group Bla) of approved make, shade and pattern for dado and skirting in required position fixed in 1:4 cement mortar including neat cement float, filling joints, curing and clearing et-cetra complete

[B] FIRST FLOOR

[C] SECOUND FLOOR

Providing and fixing heavy duty inter locking concrete Coloured paving blocks of 60 milmeter thickness of having a strength of 300 Kilogram per Square centimeter of approved quality and shape on a bed of crushed sand of 25 to 30 milmeter thick including skirting joints and cleaning et-cetra complete.

Providing and fixing heavy duty inter locking concrete Coloured paving blocks of 80 milimeter thickness of having a strength of 300 Kilogram per Square centimeter of approved quality and shape on a bed of crushed sand of 25 to 30 milimeter thick including skirting joints and cleaning et-cetra complete.

Providing and Laying factory made coloured chamfered edge Cement concrete grass paver blocks of required strength,thickness and size or shape, made by table vibratory method using PU mould, laid in required colour and pattern over 50 milimeter thick compacted bed of fine fine aggregate (natural sand or crushed sand Vertical Shaft Impact grade finely washed et-cetra), compacting and proper embedding or laying of inter locking paver blocks into the fine aggregate (natural sand or crushed sand Vertical Shaft Impact grade finely washed et-cetra) bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine aggregate (natural sand or crushed sand Vertical Shaft Impact grade finely washed et-cetra) and cutting of paver blocks as per required size and pattern, finishing and sweeping extra fine aggregate (natural sand/crushed sand Vertical Shaft Impact grade finely washed et-cetra) and complete as per manufacturer spsecifications and direction of Engineer-in-Charge. 60 milimeter thick Cement Concrete paver block of Mix-35 grade concrete with approved colour and design and pattern.

Providing and casting in situ or precast tapering Reinforced Cement Concrete Mix-20 Barrier type Kerb without gutter ( as per Indian Road Congress 86 1983) embedded 125 milimeter below ground level over Mix-10 Plain Cement Concrete finished neatly with Cement Mortar 1:2, setting the same in Cement Mortar 1:2, including the required excavation in any strata and removing the excavated stuff any where in city and redoing the surface as specified and directed by Engineering In-charge. Using Concrete Batching and Mixing Plant.

Providing, laying and fixing exterior grade fibrilling fibre reinforcement heavy duty designer cement concrete tiles for Flooring of approved colour and design 22 +/ -2 milimeter thick bayer colour pigmented as per Indian Standard ..1237 - 1980 having compressive strength more than 500 Kilogram per square cubic meter reaffirmed in 2006 ,having wert transvrse strenghth of 3.5 per milimeter 2, water absorption less than 10 percent abrasion or wear resistance less than 2 milimeter ,skid resistance more than 25.0 (ASTM:E303) and no fading as per DIN - 51094 of size 300 x 300 in plan or designed pattern on a bed of 1:4 cement mortar including cement float ,filling joints with neat cement slurry ,curing, polishing and cleaning etc. complete. For flooring.

Providing and laying Antiskid Ceramic tiles of approved quality of size 30 centimeter x 30 centimeter and confirming to Indian Standard 15622-2006 (Group-B IIA) for antiskid flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with cement slurry cleaning curing et-cetra complete.

[B] FIRST FLOOR

[C] SECOUND FLOOR

Providing and laying telephone black or Amba White or Cadburybrown or Ruby red or Ocean Brown granite stone of 18 to 20 milmeter thick for door frame or dado or window boxing et-cetra On Cement Mortar 1:6 including filling joints with polymer base filler nosing or moulding the sharp edges wherever necessary, curing, et-cetra complete.

[B] FIRST FLOOR

[C] SECOUND FLOOR

Providing and constructing granite kitchen platform with fixing of stainless steel sink 600 milmeter x 450 milmeter size as per detailed drawing including vertical both side polished kadappah stone 25 to 30 milmeter thick supports with kadappah top 35 to 40 milmeter thick and polished granite 16 to 20 milmeter top with side strips of granite at front and both sides of platform raised with two vertical granite supports 15 centimeter height and top granite of 75 x 40 centimeter including cutting, opening for sink of required size in kadappah as well as granite et-cetra complete. (Platform top size 5.00 meter x 0.60 meter and height is 0.75 meter)

[B] FIRST FLOOR

Providing and applying two coats of textured synthetic paint of approved shade and quality and one coat of primer before applying textured paint including scaffolding if necessary preparing surface by thoroughly cleaning oil, grease, dirt and other materials as required, et-cetra complete.

[B] FIRST FLOOR

[C] SECOUND FLOOR

Providing and applying two coats of exterior acraylic emulsion paint confirming to corresponding Indian Standard of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface, applying primer coat ,scaffolding if necessary , and watering the surface for two days et-cetra complete.

[B] FIRST FLOOR

[C] SECOUND FLOOR

Providing and applying priming coat on concrete or masonary or Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etc. complete.

[B] FIRST FLOOR

[C] SECOUND FLOOR

Providing and applying two coats of water proof cement paint of approved manufacture and of approved colour to the plastered surfaces including scaffolding if necessary, cleaning and preparing the surface, watering for two days et-cetra complete.

Providing and applying washable oil-bound distemper of approved colour and shade to old and new surfaces in two coats including scaffolding, preparing the surfaces. (excluding the primer coat.) et-cetra complete.

[B] FIRST FLOOR

[C] SECOUND FLOOR

Providing and applying plastic emulsion paint of approved quality, colour and shade to old and new surfaces in two coats including scaffolding, preparing the surface. (excluding the primer coat) et-cetra complete.

[B] FIRST FLOOR

[C] SECOUND FLOOR

Providing and applying interior wall finish luster of approved make on internal wall surface as detailed below Scrapping the surface with emery paper and wipe clean wall primer with brush with mineral turpentine with brush 8 to 10 percent and oil 15 to 20 percent with roller and allowing to dry for a period 6 to 8 hours. wall putty with appropriate proportion of water allowing to dry for period 4 to 6 hours. Scrapping with Emery paper 180 and wipe clean. Applyingwall primer with brush with mineral turpentine 8 to 10 percent and oil 15 to 20 percent with roller Scrapping Emery paper 320 and wipe clean, interior wall finish luster 1st coat with brush or rubber or spray with mineral turpentine 7 to 9 percent and Oil with roller 19 to 21 percent After 8 hours of activity Applying 2nd coat or wall finish Lustre with mineral turpentine 7 to 9 percent with brush and Oil with roller 19 to 21 percent after allowing dry for the period of 6 to 8 hours activity. (With prior approval of Superintending Engineer)

[B] FIRST FLOOR

[C] SECOUND FLOOR

Providing and fixing solid core flush door shutter in single leaf 32 milmeter thick decorative type of exterior grade as per detailed drawings approved face veneers 3 milmeter thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish et-cetra complete.

[B] FIRST FLOOR

[C] SECOUND FLOOR

Providing and fixing solid core flush door shutter in double leaf 32 milimeter thick decorative type of exterior grade as per detailed drawings approved face veneers 3 milimeter thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish et-cetra complete.

[B] FIRST FLOOR

[C] SECOUND FLOOR

Providing and fixing in position, Single shuttered aluminium extruded powder coated openable door of overall size 0.90 meter x 2.40 meter with aluminium door frame of powder coated section 101.60 x 44.75 milimeter , 3.18 milimeter thick and shutter comprising of powder coated section having bottom and lock rail of size 150 milimeter x 44.5 milimeter x 3.00 milimeter thick top rails 47.62 x 44.45 milimeter x 3.00 milimeter thick , vertical style 47.62 x 44.45 milimeter, 3.00 milimeter thick and for shutter plain glass panes 5 milimeter thick for top panels and 12 milimeter thick both side laminated phenol bonded particle board panels for bottom panels etc. , Indian Standard Institute mark , with bijagiri having heavy duty concealed lock, necessary beading, glazing clips, Polynvinyl chloride gaskets, 250 milimeter length tower bolts, 150 milimeter diam. pad handle, et-cetra as per detailed design and drawing or as directed by engineer in charge including all materials , labours, and equipment etc. complete.

Providing and fixing rolling shutter fabricated from steel laths of minimum thickness 0.9 milimeter with lock plate of 3.15 milimeter thickness reinforced with 35 x 35 x 5 milimeter angle section fitted with sliding bolts and handles for both sides, deep Mild Steel channel section of depth and thickness not less than 65 milimeter and 3.15 milimeter respectively with hold fast arrangements, Mild Steel Bracket plate 300 x 300 x 3.15 milimeter minimum size and shape with square bar, suspension shaft of minimum 32 milimeter diameter, hood cover of Mild Steel sheet not less than 0.9 milimeter thickness and of any size at top and safety devices including mechanical gear operation arrangement consisting of worm gear wheels and worms of high grade cast iron or mild steel and one coat of red lead primer et-cetra complete. (Indian Standard 62481979) (Without mechanical gear)

Providing and fixing collapsible steel gate in one or two leaves with hot rolled vertical channels of 18 x 9 x 3 milmeter minimum size, crossings of Mild Steel flats of size 18 x 5 milmeter T or E section for runner of minimum 40 x 6 milmeter size for flange, Mild Steel flat for top runner of minimum size 40 x 12 milmeter with roller wheels confirming to grade F.G. 150 fitted with snap headed rivets of minimum size 6 milmeter max. spacing of vertical channels be 100 milmeter enclosed gate position and clear space of 150 milmeter between two sets of crossings with hold fasts, stoppers, spaces, handles, locking arrangement and one coat of red lead primer and oil painting et-cetra complete. (Indian Standard 105211983).

[B] FIRST FLOOR

[C] SECOUND FLOOR

Providing and fixing Mild Steel grill door 24 Kilogram per Square Metre of various size as per detailed drawings without hot dip coating, iron fixtures and fastenings and 3 coats of oil painting et-cetra.

[B] FIRST FLOOR

[C] SECOUND FLOOR

[B] FIRST FLOOR

[C] SECOUND FLOOR

Providing and fixing in position anodised (as per Indian Standard 1868 or 1982) Aluminium fixed staggered ( Z Type) Ventilator with aluminium rectangular pipe 63 milimeter x 38.10 milimeter x 1.22 milimeter at weight 0.650 Kilogram per One Running Metre, Aluminium angle of size 15 milimeter x 15 milimeter x 1 milimeter, aluminium channel of 9 milimeter sizes, Stainless Steel mosquito net of 304 Grade,4 milimeter thick float glass per detailed drawing and as directed by Engineer in charge et-cetra complete.

[B] FIRST FLOOR

[C] SECOUND FLOOR

Medium Height Partition at 1800 or 1200HT TILE BASED PARTITION SYSTEM Tile based Aluminum partition system of 1800 or 1200 milimeter ht. made of 60 milimeter thick aluminum frames having two separate race ways for laying electrical and computer wiring. The wire management shall be through to the race way to be fitted at bottom of partition other immediately below of work top with hook on type raceway cover for easy access of wires. Frames to be joined by aluminum connectors with M6 x 16 pan-head machine screw and washer with aluminum post cover. Post cover snap on fashion to be connected on aluminum connector visible aluminium to be in anodized or powdercoated finish. The top exposed sides of the frame and posts should be covered with horizontal or Vertical trim and caps made of Aluminum in anodized or powdercoated finish in order to enhance its look.Upper tiles on the partition to be in Soft Board or Marker or prelaminated partical board tile of 9 milimeter thk., prelaminated partical board lower tiles in laminate finish 9 milimeter thk. on both the sides .Size :- 1200 or 1800 milimeter (H).

[B] FIRST FLOOR

[C] SECOUND FLOOR

Full Height Partitions in Solid finish - Providing and Fixing 80 milimeter to 85 milimeter thick Full height Double Skin partition up to 3 meter height with All visible sections in Anodized or Powdercoated finish. Made up of Frames and Tiles. Frame construction In combinaton of Aluminium Rails and Bottom ,Center and Top members, Connected with 2 way Round Shape Post , 3way Post , 4 way Post made up of Aluminium Extruded and Tiles in 9 milimeter thk. Prelaminated Partical Board of on both side. With all the Joints in the partitions covered with Polyvinyl chloride extrusions to provide better sound Proofing. Tiles to be separated 55 milimeter from each other to provide adequate space for drawing cables for electric, data and telephone with proper facility for fixing electrical and data switch plates. as per design and drawing.

[B] FIRST FLOOR

[C] SECOUND FLOOR

Full Height Partitions in Glass finish - Providing and Fixing 80 milimeter to 85 milimeter thick Full height Double Skin partition up to 3 mtr height with All visible sections in Anodized or Powdercoated finish. Made up of Frames and Tiles. Frame construction In combinaton of Aluminium Rails and Bottom ,Center and Top members, Connected with 2 way Round Shape Post , 3way Post , 4 way Post made up of Aluminium Extruded and Tiles in 5 milimeter thk. Non Toughened Glass on both side. With all the Joints in the partitions covered with Polyvinyl chloride extrusions to provide better sound Proofing. Tiles to be separated 55 milimeter from each other to provide adequate space for drawing cables for electric, data and telephone with proper facility for fixing electrical and data switch plates. as per design and drawing.

[B] FIRST FLOOR

[C] SECOUND FLOOR

Supply, fixing and installation of 4 milimeter thick Aluminium Composite Panel (ACP) of approved colour for external cladding in combination of solid and metallic colours, including all necessary Framework, support and complete weather sealing as per architectural drawing. The Aluminium Composite Panel (ACP) should be made out of thermoplastic core of low-density polyethylene LDPE (100 percent virgin mix), sandwiched between two aluminium sheets of ALLOY GRADE- 5000 series, each not less than 0.50 milimeter thick, total thickness of aluminium composite panels not to be less than 4 milimeter, the exposed surface thereof shall have Stove lacquered finishing coat not less than (26 + - 2) micron (containing minimum 70 percent kynar 500 based PVDF) of colour and shade as per architectural design. The inside surface (facing the building exterior surface)shall have polyster based powder coating not less than 25 Micron with protective peel-off foil on the exterior face (peel off film will in no case leave any adhesive mark over the composite panel surface after it is peeled off). The supporting framework shall be made out of 50 milimeter X25 milimeter X 3 milimeter thick Aluminium section to be spaced horizontally and vertically for fixing of panel of size 900 milimeter X 1200 milimeter and fixed to the building structure as per design through 50 milimeter X50 milimeter X5 milimeter Mild Steel angle clamps prefixed to masonry or slab, columns with Hilti make anchor fastener screws. The fixing of panel to be done with the help of VHB tapes and screws and all the sealing of joints to be done with weather sealent Silicon as directed by Engineer-in-charge. (Prior permission of Superintending Engineer is necessary before inclusion of this item in estimate)

[B] FIRST FLOOR

[C] SECOUND FLOOR

Providing and fixing in position (as per 1868 or 1982) Alluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90 milmeter at weight 0.637 Kilogram per Running metre. with window frame bottom track section 92 x 31.75 x 1.30 milmeter at weight 1.070 Kilogram or Running metre. Top and side track section 92 x 31.75 x 1.30 milmeter at weight 0.933 Kilogram per Running metre. The shutter should be of bearing bottom 40 x 18 x 1.25 milmeter at weight 0.417 Kilogram or Running metre. Inter locking section 40 x 18 x 1.10 milmeter at weight 0.469 Kilogram or Running metre. and handle and top section 40 x 18 x 1.25 milmeter at weight o.417 Kilogram or Running metre. As per detailed drawings and as directed by Engineerincharge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 milmeter thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts et-cetra, complete. With colour Anodising with box.

[B] FIRST FLOOR

[C] SECOUND FLOOR

Providing and fixing in position aluminium fixed window fully glazed of any size as per detailed drawing and as directed by Engineerincharge with all necessary alluminium sections including necessary fixtures and fastening such as 5 milimeter thick clear float glass et-cetra complete. b) Powder Coated .

[B] FIRST FLOOR

[C] SECOUND FLOOR

Providing and fixing frame with or without ventilator of size as specified with Country non teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300 milimeter x 40 milimeter x 5 milimeter with oil painting, et-cetra complete..

[B] FIRST FLOOR

[C] SECOUND FLOOR

Providing and fixing fiber glass reinforced polyster door shutter 30 milmeter thick as per Indian Standard 14856 (2000) (Reaffirmed 2006) without ventilator including chromium plated fixtures and fastening with chromium plated handles on both sides, et-cetra complete.

[B] FIRST FLOOR

[C] SECOUND FLOOR

Providing and fixing in position powder coated aluminium louvered windows or ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38 milmeter x 1.22 milmeter box type, 5 milmeter thick sheet glass louvers, of approved quality et-cetra complete.

[B] FIRST FLOOR

[C] SECOUND FLOOR

Providing and fixing mild steel grill work for windows, ventilators, et-cetra 15 kilograme per square meter as per drawing including fixtures necessary welding and painting with one coat of anticorrosive paint and two coats of oil painting complete.

[B] FIRST FLOOR

[C] SECOUND FLOOR

Providing and fixing 40 milimeter diameter and 1.5 milimeter thick Stainless steel hand railing in Stainless Steel 304 Grade including fabricating ,fixtures, errecting, necessary welding, grinding, finishing, buffing to stainless steel pipe et-cetra complete.

[B] FIRST FLOOR

[C] SECOUND FLOOR

Providing and Fixing mat finish stainless steel (of 302 grade ) railing with top pipe of 50 milmeter diameter and vertical pipe of 38 milmeter diameter at 0.60 meter center to center or as required and horizontal pipes of 25 milmeter diameter in three rows, all pipes of 2 milmeter thick including buffing,fabricating fixtures and fastening including pipe base of appropriate diameter and ball base of 75 milmeter dia above newel post of 75 milmeter diameter et-cetra complete (Prior approval of sample and brand by Executive Engineer is necessary before use)

[B] FIRST FLOOR

[C] SECOUND FLOOR

Dismantling stone masonry in lime or cement mortar including stacking the materils as directed with all leads, lifts et-cetra.

Providing uncoursed rubble masonry of trap or granite or quartzite or gneiss stones in cement mortar 1:6 in foundation and plinth of inner walls or in plinth of external walls including bailing out water manually , striking joints on un exposed faces and watering et-cetracomplete.

Providing flush grooved pointing with cement mortar 1:3 for stone masonry work including scaffolding and curing et-cetra complete.

Providing patti or band 150 milimeter wide on plastered surface 12 milimeter to 15 milimeter thick in Cement Mortar 1:3 line and level including neat finishing scaffolding curing et-cetra complete.

Providing and fixing mild steel grill gate with angle iron frame 65 milmeter x 65 milmeter x 10 milmeter with iron bars at 150 milmeter Center to Center and diagonal flats as per the detailed drawing including hinges, pivot block locking arrangement, welding riveting and oil painting of three coats of approved shade Weight of gate 35 Kilogram per Square meter.

Providing and erecting 1.2 meter high wire fencing with five rows of barbed wire supported on mild steel angle ( 50 x 50 x 6 milimeter) post at 2.5 meter center to center including excavation of pits of foundation concrete fixing the posts in ( 1:4:8) cement concrete block of 45 x 45 x 45 centimeter and fastening the Wires and painting the angles with one coat with red lead primer and two coats of oil painting et-cetra complete.

Providing and erecting chain link fencing 1.6 Mix height with Galvanized Iron chain link of size 50 x 50 milimeter, 8 gauge thick and fixed 75 milmeter above ground level on vertical Mild Steel Angles of 40 x 40 x 6 milmeter size, includind excavating pits for foundation and embedded in Ccement Concrete block of 1:4:8 mix of size 450 x 450 x 670 milmeter at 1.75 Meter center to center with iron bar 16 milmeter dia as hold fast including welding link with angle frame at 30 centimeter center to center with nuts and bolts and horizontal Mild Steel Angles at top and bottom of 25 x 25 x 5 milmeter size and vertical Mild Steel flat 35 x 5 milmeter and 25 x 5 milmeter horizontal including cross support of 40 x 40 x 6 milmeter angles both side at every corner or bend embedded in concrete blocks of 1:4:8 of size 450 x 450 x 670 milmeter including 3 coats of oil painting et-cetra complete.

Providing and laying cast iron pipes of B class of 80 milimeter diameter with sockets and spigot ends or flanges and cast centrifugally or vertically including specials, laying pipes and back filling the trench complete including excavation.

Providing and fixing 80 milimeter diameter water meter with non-return valve including strainer, sockets or union nut and including water meter box making locking arrangement and lock. [Without chamber].

Providing, laying and fixing polynvinyl chloride pipe of 75 milimeter diameter with fittings such as bends, tees, reducers, clamps, et-cetra including necessary excavation, trench filling et-cetra complete. Including removing existing pipe line if necessary and conveying and stacking the same in Public Work Department chowky or as directed et-cetra complete.

Providing and fixing 15 milmeter diameter screw down bib or stop tap of brass including necessary socket union nut complete.

[B] FIRST FLOOR

[C] SECOUND FLOOR

Providing and fixing White Glazed Earthenware Squatting plate (Ladies Urinal) with Polynvinyl chloride flushing cistern of 5 liters capacity with fitting, inlet pipes and stop tap, brackets for fixing the cistern, 32 milimeter diameter Polynvinyl chloride flush pipe with fittings and flushing arrangement including lead soil pipe, lead trap, soil pipe connectionup to the outside face of the wall.

Providing and fixing white glazed earthenware lipped flat back/corner type Urinal with Polynvinyl chloride 5 liters flushing cistern with fittings, inlet pipe with stop tap, brackets for fixing the cistern, 32 milimeter diameter Polynvinyl chloride flush pipe with fitting including lead soil pipe, lead trap and soil pipe connection up to the outside face of wall.

[B] FIRST FLOOR

[C] SECOUND FLOOR

Providing and fixing white glazed earthenware Wash Hand Basin of 55 centimeter x 40 centimeter size including cold water pillar tap or cold and hot water pillar tap brackets, rubber plugs and brass chain, stop tap and necessary pipe connections including Polynvinyl chloride waste pipe and trap up to the outside face of the wall. Making good the damaged surface, testing et-cetra complete.

[B] FIRST FLOOR

[C] SECOUND FLOOR

Providing and fixing 15 centimeter x 10 centimeter salt glazed stoneware gully trap in cement concrete 1:4:8 outside the building including cast iron grating in the sink, connecting glazed stoneware pipe, brick masonry chamber with cast iron lid and cast iron grating for the gully trap.

Providing and laying concrete pipes of Indian Standard Non Pressure class of 300 milimeter diameter in proper line, level and slope including necessary collars, excavation, laying, fixing with collars in cement mortar 1:1 and refilling the trench complete.

Providing and laying cement concrete pipe of Indian Standard 458:2003 Non Pressure-2 class of 450 milimeter diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 and curing et-cetra complete.

Providing and laying cement concrete pipe of Indian Standard 458:2003 Non Pressure-2 class of 600 milimeter diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 and curing et-cetra complete.

Providing and constructing Brick Masonry Inspection Chamber 60 centimeter x 45 centimeter x 90 centimeter including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round Glazed Stone Ware pipes, Brick Masonry, plastering from inside and with frame fixed in cement concrete with Reinforced Cement Concrete Cover medium duty 140 Kilogram with frame et-cetra complete.

Providing soak pit of size 120 centimeter x 120 centimeter x 120 centimeter including excavating and filling with brick-bats.

Providing and fixing 450 milmeter x 550 milmeter size superior type Belgium mirror with 16 milmeter diameter nickel plated towel rod et-cetra complete.

[B] FIRST FLOOR

[C] SECOUND FLOOR

Providing and fixing Orissa type white glazed earthenware 575 milimeter water closet pan including S trap with earthenware foot rests, cast iron soil and vent pipe upto outside face of the wall 1:2:4 brick bat lime concrete bedding without flushing tank and its accessories et-cetra complete.

[B] FIRST FLOOR

[C] SECOUND FLOOR

Providing and fixing European type white glazed earthenware water closet pan with Unplasticized polynvinyl chloride seat and lid with chromium plated brass hinges and rubber buffers including Unplasticized polynvinyl chloride and vent pipe up to the outside face of wall without flushing cistern with flush cock and with water Jet and necessary fittings including cutting and making good to the walls and floors testing et-cetra complete.( prior approval of sample and brand by Executive Engineer is necessary before use) Specfications.

[B] FIRST FLOOR

[C] SECOUND FLOOR

Providing and Fixing half turn 25 milimeter diameter gun metal flushing cock including all accessories et-cetra complete.

[B] FIRST FLOOR

[C] SECOUND FLOOR

Providing and fixing 15 milimeter diameter Ball cock medium type with Polyvinyl chloride float including sockets and necessary fittings and tested as per municipal requirement et-cetra.

[B] FIRST FLOOR

[C] SECOUND FLOOR

Providing and fixing 75 milmeter diameter stabiliser pipe or Polyvinyl chloride soil vent or waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps et-cetra complete.

[B] FIRST FLOOR

[C] SECOUND FLOOR

Providing and fixing 100 milmeter diameter stabiliser pipe or Polyvinyl chloride soil vent or waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps et-cetra complete.

[B] FIRST FLOOR

[C] SECOUND FLOOR

Providing and fixing High Density Polyethylene container one piece moulded water tank made out of low density polythyler and built corrugation including of delivery up to destination hoisting and fixing of accessories such as inlet, outlet overflow of all tanks capacity above 1000 to 20,000 litres.

[C] SECOUND FLOOR

Providing and fixing on walls or ceiling or floor 15 milimeter diameter chlorinated Polyvinyl chloride pipe with necessary fittings, remaking good the demolished portion et-cetra complete. Including removing existing pipe line if necessary and conveying and stacking the same in Public Work Department chowky or as directed etc. complete.

[B] FIRST FLOOR

[C] SECOUND FLOOR

Providing and fixing on walls or ceiling or floor 20 milimeter diameter chlorinated Polyvinyl chloride pipe with necessary fittings, remaking good the demolished portion et-cetra complete. Including removing existing pipe line if necessary and conveying and stacking the same in Public Work Department chowky or as directed et-cetra complete.

[B] FIRST FLOOR

[C] SECOUND FLOOR

Providing and laying in trenches 25 milmeter daimeter chlorinated Polyvinyl chloride pipe including necessary excavation, fittings. Refilling trenches et-cetra complete. Including removing existing pipe line if necessary and conveying and stacking the same in Public Work Department chowky or as directed et-cetra complete.

Providing and fixing 10 centimeter Polyvinyl chloride nahani trap with grating et-cetra complete.

[B] FIRST FLOOR

[C] SECOUND FLOOR

Providing and fixing Polynvinyl chloride Rain water pipes of 160 milimeter outer diameter and having wall thickness of 2.2 to 2.7 milimeter confirming to Indian Standard13592-1992 including proper rainwater receiving recess with Polynvinyl chloride plug, bend, necessary fittings, such as, offsets, shoes, inluding fixing the pipe on wall using approved wooden cleats projecting 25 milimeter to 40 milimeter from face of wall a fixing with clips of approved quality and One Number ,filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on Cement Concrete or masonry blocks, including necessary scaffolding and maintenance for 3 yrs for any leakages or dislocations of pipes. All the Polynvinyl chloride fittings and additional 2 piece socket clips shall be got approved from engineer in charge et-cetra complete.

[B] FIRST FLOOR

[C] SECOUND FLOOR

Providing and fixing Polyvinyl chloride Rain water pipes of 110 milimeter outer diameter and having wall thickness of 2.2 to 2.7 milimeter confirming to Indian Standard 13592-1992 including proper rainwater receiving recess with Polyvinyl chloride plug, bend, necessary fittings, such as, offsets, shoes, inluding fixing the pipe on wall using approved wooden cleats projecting 25 milimeter to 40 milimeter from face of wall a fixing with clips of approved quality and One Number ,filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on Cement Concrete or masonry blocks, including necessary scaffolding and maintenance for 3 yrs for any leakages or dislocations of pipes. All the Polyvinyl chloride fittings and additional 2 piece socket clips shall be got approved from engineer in charge et-cetra complete.

[B] FIRST FLOOR

[C] SECOUND FLOOR

RWH - Shallow Percolation Pit providing, constructing 2.0 meter deep shallow depth percolation pit comprising of 1.0 meter diameter pre-cast Reinforced Cement Concrete rings, 300 milimeter thick side filling around outside of Reinforced Cement Concrete rings (annular space) with 40 milimeter size boulders including filling of percolation pit up to 0.5 meter depth (from bottom up) with 25-75 milimeter clean washed gravels followed by 0.5 meter depth of 10-25 milimeter of clean washed stones followed by 0.5 meter of washed river fine aggregate (natural sand or crushed sand Vertical Shaft Impact grade finely washed et-cetra) including netlon mesh between each gravel or fine aggregate (natural sand/crushed sand Vertical Shaft Impact grade finely washed et-cetra) media layer including covering with Reinforced Cement Concrete slab, manhole frame and cover, Polyvinyl chloride rungs et-cetra including arrangement for inlet and outlet pipe, excavation and backfilling as shown in the drawing. The rate shall be inclusive of all labour, material, wastage, scaffolding, transportation, taxes, including all leads, lifts at all levels. All material should be of approved make. All works complete as per the drawing, technical specification and direction of the Engineer in charge.

RWH - Recharge Pit Providing and constructing recharge pit of 2.0 meter deep and 1.0 meter diameter of pre-cast Reinforced Cement Concrete rings with 6.5" diameter x 25 meter deep borewell at the floor of recharge pit including installation of combination of solid or perforated Polyvinyl chloride casing pipe wrapped around with netlon mesh including 300 milimeter thick sidefilling around outside of Reinforced Cement Concrete rings (annular space) with 40 milimeter size boulders including filling of recharge pit up to 0.5 meter depth with 25-75 milimeter clean washed gravels from bottom up followed by 0.5 meter depth of 10- 25 milimeter of clean washed stones followed by 0.5 meter of washed river fine aggregate (natural sand or crushed sand Vertical Shaft Impact grade finely washed et-cetra) including netlon mesh between each gravel or fine aggregate (natural sand or crushed sand Vertical Shaft Impact grade finely washed et-cetra) media layer including covering with Reinforced Cement Concrete slab, manhole frame and cover, Polyvinyl chloride rungs, Polyvinyl chloride end- caps, fittings et-cetra including arrangement for inlet and outlet pipe excavation and backfilling as shown in the drawing.The rate shall be inclusive of all labour, material, wastage, scaffolding, transportation, taxes, including all leads, lifts at all levels. All material should be of approved make. All works complete as per the drawing, technical specification and direction of the Engineer in charge.

Providing and fixing in position various capacity rainwater harvesting dual intensity auto flush open ended at drain outlet filter with working principal of COHESSIVE AND CENTRIFUGAL FORCE having filter element made out of Stainless Steel 304 screen with mesh size of 205 microns having rainfall capacity of 75 meter per hour intensity with operating pressure of 0.060 Kilogramper square centimeter of Head with discharge capacity ranging from 10 to 480 lit or min including all necessary accessories like coupler,bends, Polyvinyl chloride valve, et-cetra fixing with Bombay nails of required length et-cetra complete with inlet size of 90 milimeter to 110 milimeter diameter from rooftop pipe with drain outlet of 90 milimeter to 110 milimeter diameter size with clean water outlet of 62 milimeter to 90 milimeter diameter size including fitting and fixing excluding inlet and outlet piping etc complete as per the direction by engineer in charge. FL-100 for the catchment up to 110 square meter system size 90 milimeter diameter inlet, 63 milimeter diameter clean water outlet, 90 milimeter diameter drain outlet (filterain, tee,door bend, valve 63 milimeter)

Boring or drilling bore well of 300 milimeter diameter for casing or strainer pipe, by suitable method prescribed in Indian Standard: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart or bore log, including hire and running charges of all equipments, tools, plants and machinery required for the job, all complete as per direction of Engineer in charge, upto 90m depth below ground level.

Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized Polyvinyl chloride medium well-casing pipe of 150 milimeter diameter, conforming to Indian Standard:12818, including required hire and labour charges, fittings and accessories et-cetra all complete, for all depths, as per the direction of Engineer in charge.

Providing and fixing in position Stage flooring Made from 18 milimeter plywood 1200 x 2400 and 18 milimeter Teakwood planks 100 x 800 having tongue and grove on Sal-wood frame of 50 x 100 at 600 milimeter center to center on stage surface including cost of required Cut-Outs, decorative mouldings or finishing-items or polish et-cetra, as per Architectural and Acoustical Design and Instructions and Complete in all aspects. including all materials labour,finishing et-cetra complete. [B] FIRST FLOOR

Providing and fixing in position Gypsum board false ceiling with 12.5 milimeter thick Gypsum boards, screwed or fixed to the under structure of suspended Galvanized Iron Grid constructed and suspended from the main ceiling consisting of ceiling sections of size 25 x 50 milimeter maximum center to center distance of 600 milimetre perimeter channel and intermediate channels at maximum center to center distance 1200 milimetre galvanized grid should be fixed to reinforced cement concrete slab. The gypsum board should be fixed to galvanized iron grid with necessary screws. The boards should be taped and filled from underside to give smooth, seamless ceiling. The rate should include necessary additional ceiling sections and intermediate channels. Additional intermediate channels should be fixed to strap hangers for additional support to prevent strapping at every 1200 milimetre item to be completed in all respect including necessary sleeves for ducts finishing of joints cut outs, painting including labour, material, lifts et-cetra all complete.

[B] FIRST FLOOR

[C] SECOUND FLOOR

Providing and Fixing in position, Acoustical Ceiling made from Gypsum Plain Panels on approved heavy duty Galvanized Iron frame ceiling channels at 450 center to ceter and intermediate channels not more than 1200 center to ceter, along with ply wood forms suspended with Hangers from Roof, in front of 1000 Gsm synthetic wool 50 milimeter thick, with Paint, including cost of required Cut-Outs, decorative mouldings or finishing-items and Scaffolding, as per Architectural and Acoustical Design and Instructions and Complete in all aspects including all materials labour,finishing et-cetra complete.

[B] FIRST FLOOR

[C] SECOUND FLOOR

Providing and fixing 90 centimeter x 60 centimeter Granite plate engraving 10 centimeter height letter, figures including painting the lefters or figures with approved colour and shade complete.

Labour charges for removing grass, thorney shrubs, Jungli shrub, Kubabul and alike grass along roadside making the ground clean by showel and phavaras et-cetra complete.

Providing and fixing cautionary or warning sign board of size 60 centimeter having shape of equilateral triangle with apex point upwards. prepared on 16 gauge Mild Steel sheet including painting with one coat of zinc cromate stoving primer and two coats each of white back ground, red border and backside gray stove enamelled, bonded with cut out of Retro reflective sheet Engineering grade, symbol or letters or numerals or border or arrow, coated with non pealable crystal clear protective transparent coat retaining 100 percent reflection including one One Number of Mild Steel Angle iron post of size 50 x 50 x 5 milimeter of 3.65 meter long inflated at bottom drilled on top in one piece without joint painted with white and black bands of 30 centimeter fixing board and post with 2 Number high strength Galvanized Iron bolts and nuts of size 10 milimeter diameter and 20 milimeter long including all taxes, conveying, fixing in ground with cement concrete 1:4:8 block of 60 centimeter x 60 centimeter x 75 centimeter size et-cetra complete. 60 centimeter equilateral triangle Mild Steel sheet with Engineering grade,

Electrical Work : Supplying and erecting HMS PVC conduit FRLS grade 25 mm dia. with necessary accessories in wall/floor with chiselling appropriately as per specification No: WG-MA/CC

Supplying and erecting HMS PVC conduit FRLS grade 25 mm dia with necessary accessories in RCC work/false ceiling/false flooring as per specification No. WG-MA/CC

Supplying and erecting HMS PVC conduit FRLS grade 32mm dia. with necessary accessories in RCC work/false ceiling/false flooring as per specification No. WG-MA/CC

Supplying and erecting PVC box trunking of size 50x50 mm. with accessories on wall/ceiling as per specification No: WG-MA/BOX

Supplying and erecting mains with 2x1.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW

Supplying and erecting green colour earthing with 1x 1.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW

Supplying and erecting mains with 2x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW

Supplying and erecting green colour earthing with 1x 2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW

Supplying and erecting mains with 4x 4 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW Note :- Rate of Item Doubled as per note no. 1

Supplying and erecting mains with 2x4 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW

Supplying and erecting green colour earthing with 1x 4 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW

Supplying and erecting mains with 4x 6 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW Note :- Rate of Item Doubled as per note no. 1

Supplying and erecting green colour earthing with 1x 6 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW

Supplying and erecting modular type switch 6A / 10A duly erected on provided plate and box with wiring connections complete.

Supplying and erecting modular type switch 16A duly erected on provided plate and box with wiring connections complete.

Supplying and erecting modular type D.P. switch 32A with indicator, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting modular type 3 pin 6A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting modular type 3 pin 6 / 16A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting modular type buzzer 220 / 250V, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting modular type (two module) electronic step regulator for fan, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 2 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 3 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 12 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.

Point wiring for light/bell concealed type in min 20 mm FRLS grade HMS PVC conduit with 1.5 sq.mm. (2+1E) FRLSH grade copper wires, modular type switch, earthing and required accessories as per specification No: WG-PW/CW

Point wiring for ceiling fan concealed type in min 20 mm FRLS grade HMS PVC conduit with 1.5 sq.mm. (2+1E) FRLSH grade copper wires, modular type switch, earthing and required accessories as per specification No: WG-PW/CW

Point wiring for independent plug in 20 mm FRLS grade HMS PVC conduit with 1.5 sq.mm (2+1E ) FRLSH grade copper wire, modular type switch, earthing and required accessories as per specification No: WG-PW/SW

Point wiring for light/bell hybrid type (Surface type under false ceiling and concealed type for drops & switch boards on walls) in min 20 mm PVC conduit / casing n capping with 1.5 sq.mm. (2+1E) FRLSH grade copper wires, modular type switch, earthing and required accessories as per specification No: WG-PW/HW

Point wiring for ceiling fan (Surface type under false ceiling and concealed type for drops & switch boards on walls) in min 20 mm PVC conduit / casing n capping with 1.5 sq.mm. (2+1E) FRLSH grade copper wires, modular type switch, earthing and required accessories as per specification No: WG-PW/HW

Wiring for plug on board with Switch socket surface/concealed type, copper wiring and earthing and with modular accessories as per specification No: WG-PW/CW

Supplying and erecting LED square / circular Max. 7W down lighter/ Panel Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 770 Lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty.

Supplying and erecting LED square / circular Max. 14 W down lighter/Panel Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 1500 Lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty.

Supplying and erecting LED square / circular Max. 18 W down lighter/ Panel Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 2000 Lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty.

Supplying and erecting LED Panel Light(600mm X 600mm) Max. 30 W having CRCA powder coated housing, polystyrene diffuser having system lumens output of Min. 3600 Lumens, min. efficacy of 120 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50 including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty.

Making suitable size recess in any type of false ceiling for erection of flush type down lighter and finishing the background to match the original surface upto 20W.

Making suitable size of recess in any type of false ceiling for erection of flush type LED panel light 600mm x 600mm/1200x300mm and finishing the background to match the original ceiling surface.

Supplying and erecting anodized aluminium corridor / passage / mirror light LED fitting (2 feet) Max. 12W with high transitivity diffuser with min. system lumens output of 1200 lumens, min. efficacy of 100 lumen/W, CRI>80, CCT upto 6000K, Beam Angle of 110 deg., Ripple<5%, THD<10%, p.f. >0.95, operating range of 200-270V, surge protection of 2 kV, Life class of 50,000 Hrs. at L70B50, including driver with end caps on provided PVC Block / wooden board with 3 years warranty.

Supplying and erecting anodized aluminium corridor / passage light LED fitting (4 feet) Max. 22W with high transitivity diffuser with system lumens output of Min.2200 lumens , min. efficacy of 100 lumen/W, CRI>80, CCT upto 6000K, Beam Angle of 110 deg., Ripple<5%, THD<10%, p.f. >0.95, operating range of 200-270V, surge protection of 2 kV, Life class of 50,000 Hrs. at L70B50, including driver, with end caps on provided PVC Block / wooden board with 3 years warranty.

Supplying and erecting inverter LED batten 20W tube light fitting with polycarbonate housing, heat sink, integrated HF electronic driver, Min. 2600 mAh Lithium ion Battery with charging time of 8-10 Hours and backup time of Min. 3 hrs. with minimum 25% of initial Watts having luminous efficacy of 100 lumen/watt, CRI>80, CCT of 6500K and THD<=20% having useful life of minimum 25000 hrs. with overheating protection with 2 years warranty.

Supplying and erecting Electronic type cordless call bell erected on T.W. board having portable bell push working on 9V D.C. battery and (effective range upto 45 meter) bell on 250 V A.C. supply.

Supplying and erecting fresh air cum exhaust fan of light duty 250 V A.C. 50 cycles 225mm. 1400 RPM rust proof body & blades, wire mesh, duly erected, complete.

Supplying and erecting Energy Saving BLDC Ceiling fan 230 V A.C. 50 cycles 1200 mm, max. energy consumption of 28W having service ratio (CMM/W) of Min. 8 , PF>0.9, THD<10% with IR remote control/compatible speed regulator, Temperature Rise of Max. 40 deg. C, having external mounted control PCB completely erected in position as per specification no. FG-FN/CF

Supplying and fixing anchor type fastener fan hook, with 2 nos. of 10 mm dia x 75 mm long with necessary materials for ceiling fan.

Supplying and erecting fan hook box of 10 mm M.S. round bar bounded to the R.C.C. bars upto 50 mm length each side and pierced through a 16 S.W.G. thick aluminium/M.S. Bowl 100 mm dia. or equivalent square size and having depth upto 75 mm complete erected with duly painted by one coat of red oxide paint and two coats of paint erected in position and without any leakage of slurry of cement concrete on either side of the box and positioned to the bottom level of the slab.

Supplying and erecting ‘B’ class G.I .pipe / M.S. pipe down rod duly painted for fan complete erected with PVC three core flexible cable 1 sq. mm copper PVC wire.

Supplying and erecting self contained water cooler 230/250V 50Hz nominal cooling capacity of 150 litres per hour and storage capacity 150 litres with partially stainless steel body as per specification no. AP-WCR/WC

Supplying and erecting ultra violet storage type water purifier (RO+UV+UF) with softener for safe drinking water consisting of UV germicidal tube of 8W capacity choke made of copper wire and two indicator lamps with output of purified water minimum 0.33 litre/min with activated carbon filter and softener operating on 230V, single phase A.C. supply with UV fail & filter change indication system .(for TDS more than 200)

Supplying installing and testing 3kVA capacity online pure sine wave with backup time of ....... hrs. PWM & IGBT based UPS with 0.8 to unity output pf, single phase input & 1 phase output complete with all protections as per specification no. AP-UPS

Supplying installing and testing commissioning 6kVA capacity online pure sine wave with backup time of ....... hrs. PWM & IGBT based UPS with 0.9 to unity output pf, single phase input & 1 phase output complete with all protections as per specification no. AP-UPS

Supplying and erecting 12V/17Ah -18Ah SMF battery with battery terminal wire, duly charged with 12 months warranty complete

Supplying and erecting 12V/26Ah SMF battery with battery terminal wire, duly charged with 24 months warranty complete

Supplying and erecting SPMCB 6A to 32A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB

Supplying and erecting SPMCB 6A to 32A, B-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB

Supplying and erecting TPMCB 6A to 32A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB

Supplying and erecting TPMCB 40A to 63A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB

Supplying and erecting triple pole and neutral distribution board (TPNDB), SPMCB of 4 ways/phase (12 poles), with door, 1.2mm thickness, surface/flush mounted, IP 43 protection on iron/GI frame (horizontal busbar type) as per specification no. SW-SWR/MCBDB

Supplying and erecting triple pole and neutral distribution board (TPNDB), SPMCB of 8 ways / phase (24 poles), with door, 1.2mm thickness surface/ flush mounted, IP 43 Protection on iron/GI frame (horizontal busbar type) as per specification no. SW-SWR/MCBDB

Supplying and erecting triple pole and neutral distribution board (TPNDB), SP/TP MCBs total 4 ways /12 Poles, with door, 1.2mm thickness surface/flush mounted, IP 43 Protection on iron/GI frame (vertical busbar type) as per specification no. SW-SWR/MCBDB

Supplying and erecting single pole and neutral distribution board (SPNDB), with 2 ways for incoming and 10 ways (10 poles) for outgoing SP MCBs, with door, 1.2mm thickness surface / flush mounted, IP 43 Protection on iron / GI frame as per specification no. SW-SWR/MCBDB

Supplying and erecting CRCA sheet metal one way enclosures of 1.2mm thickness suitable for DP MCB /TP MCB/FP MCB/RCCB/RCBO complete erected on angle iron/GI frame.

Supplying and erecting triple pole and neutral distribution board (TPNDB), 3 pole/ 4 pole MCCB as incomer & outgoing SP MCB (12 poles) or TP MCB of 4 ways (12 poles), with door, 1.2mm thickness, surface/flush mounted, on iron/GI frame (vertical busbar type) as per specification no. SW-SWR/MCBDB1

Supplying and erecting triple pole and neutral distribution board (TPNDB), 3 pole/4 pole MCCB as incomer & outgoing SP MCB (24 poles) or TP MCB of 8 ways (24 poles), with door, 1.2mm thickness, surface/flush mounted, on iron/GI frame (vertical busbar type) as per specification no. SW-SWR/MCBDB1

Providing and erecting 4 Pole MCCB, 415V, 200A, rated short-circuit breaking capacity 25 kA (Ics=100% of Icu), adjustable thermal (overload) setting and adjustable magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact and MCCB should have phase barriers both sides, with insulation withstand capacity 800V, no line-load bias in provided enclosure/panel as per specification no. SW-SWR/MCCB

Supplying and erecting 2 pole RCCB 16/25A, electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication complete as per specification no. SW-RCCB/RCCB

Supplying and erecting 4 pole RCCB 16/25A, electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication complete as per specification no. SW-RCCB/RCCB

Supplying and erecting 4 pole RCCB 40A, electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication complete as per specification no. SW-RCCB/RCCB

Supplying and erecting 4 pole RCCB 63A, electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication complete as per specification no. SW-RCCB/RCCB

Supplying and erecting 2 pole, RCBO 6/10/16/20/25A, with overcurrent, rated short-circuit breaking capacity (10 kA) and earth leakage protection, with 30/100/300 mA sensitivity and short circuit and earth leakage trip indication as per specification no SW-RCCB/RCBO

Supplying and erecting 100 kVAr, 440 V 3 phase, 50 Hz., Contactor Logic & Intelligent Relay micro APFC passive filter panel, consisting of suitable steps of APP/MPP type capacitor units with Detuned (harmonic filter) reactors of suitable rating , APFC panel shall be compliance to IEC 61439 and power quality IEC 61921 standard as per specification no CP-ED/APFC

Supplying and erecting FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 50 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying and erecting FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 95 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Providing and erecting hot dipped galvanised ladder type cable tray manufactured from 16 SWG (1.6 mm thick) GI sheet of 150 mm width & 75 mm height complete with necessary coupler plates & hardware.

earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm complete with all materials, testing & recording the results as per specification no. EA-EP

earthing with copper earth plate size 60 x 60 x 0.315 cm with funnel with a wire mesh for watering and brick masonry block C.l. cover with minimum 25 kg Carbon based environment friendly back fill Ground Enhancing compound complete with all materials, testing & recording the results as per specification no ESE -LA

Supplying and erecting copper strip of high purity required size used for earthing on wall and/or any other purpose with necessary copper clamps fixed on wall painted with bituminous paint with joints required. As per specification no. EA-EP.

Supplying and erecting GI strip of high purity required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint with joints required. As per specification no EA-EP.

Supplying and erecting conventional spike type air termination suitable to carry lightning stroke made up of heavy gauge 40 mm dia copper pipe of standard length with 5 Nos. copper spikes fixed on copper ball as air terminals duly threaded in copper pipe erected on provided foundation complete.

Supplying and erecting HMS PVC conduit FRLS grade 25 mm dia. with necessary accessories in wall/floor with chiselling appropriately as per specification No: WG-MA/CC

Supplying and erecting modular type T.V. socket single outlet, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting modular type telephone socket one gang with safety shutter, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 1 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 2 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.

Supplying and erecting 2 pair telephone copper cable 0.5 mm dia. with high density polyethylene insulation, polyester taped, Nylon Rip Cord & grey colour sheathed with FR PVC, conforming to ITD specification S/WS 113C laid in provided PVC casing capping/conduit as per specification No. WG-TW

Supplying and erecting 10 pair, 0.5 mm dia. jelly filled armoured telephone copper cable with poly-al laminate moisture barrier, polythene sheathed, G.S.Tape armoured polythene jacketed having laid in provided trench as per specification No. WG-TW

Supplying and erecting co-axial copper cable low voltage grade tri-shielded RG-11 as per specification No. WG-TW

Supplying and erecting MDF Box 50x50 pairs made from min. 1.5mm thick MS sheet as per specification no. WG-TW

Supplying and erecting 10 pairs FR junction box with moulded plastic enclosure as per specification no. WG-TW

Supplying and erecting 10 pair module for connection & disconnection of telephone cable as per specification no. WG-TW

Supplying and erecting digital (hybrid) type EPABX of 6 x 32 extensions suitable upto 96 extensions complete.Add Rs. 38159.00 for additional 16 extension card for digital (hybrid) type EPABX

Supplying and erecting push button telephone instrument desk top/wall mount with caller ID & Speaker unit as per specification complete.

Supplying and erecting IP telephone instrument as per specification complete.

Supplying and installing cat-6 cable suitable for networking as per specification no. WG-COC/NC

Supplying and installing cat-6 armoured cable with ECCS tape suitable for networking as per specification No. WG-COC/NC

Supplying fixing 1 m UTP patch cord of Cat 6 type in position as per specification No. WG-COC/PC

Supplying fixing 2 m UTP patch cord of cat 6 type in position as per specification No. WG-COC/PC

Supplying fixing 8-ports managed gigabit, Layer-2 switch, 10/100/1000 base-T, POE smart switch plus 2 SFP erected in provided rack complete.

Supplying fixing 24 ports with 4 (SFP+) port, ethernet managed switch with web view/CLI, 6KV surge protection on ethernet port and console port for management in provided rack as per specification no. WG-NWC/GBS

Supplying fixing broadband ADSL router with all accessories, on provided rack as per specification No. WG-NWC/ADSL

Supplying fixing UTP connector (RJ-45) as per specification No. WG-NAS/UTPC.

Supplying fixing tool-less IO (Ethernet) flush/surface type in provided modular box as per specification no. WG-NAS/IO

Supplying fixing 24 port patch panel with tool-less keystone jacks in provided U Rack complete as per specification no. WG-NAS/PP

Supplying fixing 6U wall mount rack (Dimension-DxWxH – 500x600x367 mm) as per specification No. WG-NAS/RAK

Supplying fixing 9U wall mount rack (Dimension-DxWxH – 500x600x500 mm) as per specification No. WG-NAS/RAK

Supplying and erecting PVC trunking (PVC casing-n-capping) of size 25 mm with accessories on wall/ceiling as per specification No: WG-MA/CON.

Supplying and erecting mains with 3x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW

Supplying and erecting modular type switch 16A duly erected on provided plate and box with wiring connections complete.

Supplying and erecting modular type 3 pin 6 / 16A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting PVC Surface modular switch box with double mounting plate for 3 module duly erected.

Supplying and fixing 9U wall mount rack (Dimension-DxWxH – 500x600x500 mm) as per specification No. WG-NAS/RAK

Providing and fixing high-density polyethylene (HDPE) container one piece moulded triple layer water tank made out of high density polyethylene and built corrugated inclusive of delivery up to destination hoisting and fixing of accessories such as inlet, outlet overflow pipe inclusive of all tanks capacity up to 20000 litres.

Supplying and erecting iron work, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority.

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 95 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL For Main Pump

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 185 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL For Main incommer

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3 core 6 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU For Booster Pump

Supplying and laying (including excavation of suitable width & depth up to 90 cm) 75 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete. For Underground Cable

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 6 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU For Jockey Pump

Providing & erecting hot dipped galvanised cover suitable for perforated type Cable tray manufactured from 18 SWG (1.2 mm thick) GI sheet of 150 mm width & 20 mm height complete with necessary hardware.

Providing & erecting hot dipped galvanised cover suitable for perforated type Cable tray manufactured from 18 SWG (1.2 mm thick) GI sheet of 200 mm width & 20 mm height complete with necessary hardware.

Providing & erecting hot dipped galvanised cover suitable for perforated type Cable tray manufactured from 18 SWG (1.2 mm thick) GI sheet of 300 mm width & 20 mm height complete with necessary hardware.

Providng earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm complete with all materials, testing & recording the results as per specification no. EA-EP

Supplying and erecting GI strip of high purity required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint with joints required. As per specification no EA-EP.

Supplying, installation, testing and commissioning of jockey fire pump (JP) suitable for water discharge of 180 LPM at 76 m head driven by electric motor 415 volts, 3 phase 50 Hz, AC supply of 9.3 kW or of suitable kW capacity for manual/automatic operation and consisting of following : (a) Horizontal/vertical type, multi stage, centrifugal casing pump of cast iron body & bronze impeller with stainless steel shaft(SS410 grade), mechanical seal conforming to IS 1520. (b) Squirrel cage induction motor, TEFC, synchronous speed 3000 RPM, suitable for operation with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325. (c) M.S. fabricated common base plate, coupling, coupling guard, foundation bolts etc. as required. (d) Erected on provided suitable size cement concrete foundation duly plastered with anti vibration pads with perfect aligning, proper levelling complete pump set with accessories duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003)complete, as per specification no. FF-MFP/JP

Supplying, installation, testing and commissioning of jockey fire pump (JP) suitable for water discharge of 180 LPM at 76 m head driven by electric motor 415 volts, 3 phase 50 Hz, AC supply of 9.3 kW or of suitable kW capacity for manual/automatic operation and consisting of following : (a) Horizontal/vertical type, multi stage, centrifugal casing pump of cast iron body & bronze impeller with stainless steel shaft(SS410 grade), mechanical seal conforming to IS 1520. (b) Squirrel cage induction motor, TEFC, synchronous speed 3000 RPM, suitable for operation with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325. (c) M.S. fabricated common base plate, coupling, coupling guard, foundation bolts etc. as required. (d) Erected on provided suitable size cement concrete foundation duly plastered with anti vibration pads with perfect aligning, proper levelling complete pump set with accessories duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003)complete, as per specification no. FF-MFP/JP

Supplying and erecting G.I. pipe ‘C’ class ERW 25 mm dia with necessary fittings complete as per specification no. FF-PP

Supplying and erecting G.I. pipe ‘C’ class ERW 50 mm dia with necessary fittings complete as per specification no. FF-PP

Supplying and erecting G.I. pipe ‘C’ class ERW 65 mm dia with necessary fittings complete as per specification no. FF-PP

Supplying and erecting G.I. pipe ‘C’ class ERW 75/80 mm dia with necessary fittings complete as per specification no. FF-PP

Supplying and erecting G.I. pipe ‘C’ class ERW 100 mm dia with necessary fittings complete as per specification no. FF-PP

Supplying and erecting G.I. pipe ‘C’ class ERW 150 mm dia with necessary fittings complete as per specification no. FF-PP

Supplying and erecting G.I. pipe ‘C’ class ERW 200 mm dia with necessary fittings complete as per specification no. FF-PP

Providing coating of bitumen paint & 4mm thick wrapping for underground 150 mm ring main of fire fighting system.

Supplying & laying (including excavation) reinforced cement concrete pipe of IS 458:2003 NP-2 class of 250 mm internal diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 and curing etc. complete.

Supplying and erecting 100 mm dia cast iron foot valve ball type/flap type with strainer for negative suction complete as per specification no. FF-VL/FV

Supplying and erecting 150 mm dia cast iron foot valve ball type/flap type with strainer for negative suction complete as per specification no. FF-VL/FV

Supplying and erecting 75/80 mm dia. cast iron double flange sluice valve complete with PN16 pressure rating, as per specification no. FF-VL/SV

Supplying and erecting 150 mm dia. cast iron double flange sluice valve complete with PN16 pressure rating, as per specification no. FF-VL/SV

Supplying and erecting 150 mm dia. cast iron double flange butterfly valve of size complete with PN16 pressure rating, as per specification no. FF-VL/BFV

Supplying and erecting 75/80 mm dia cast iron double flange NRV complete with PN16 pressure rating, as per specification no. FF-VL/NRV

Supplying and erecting 150 mm dia cast iron double flange NRV complete with PN16 pressure rating, as per specification no. FF-VL/NRV

Supplying and erecting 200 mm dia cast iron double flange NRV complete with PN16 pressure rating, as per specification no. FF-VL/NRV

Supplying and erecting 20 mm dia gun metal gate valve complete with PN16 pressure rating, as per specification no. FF-VL/GV

Supplying and erecting 25 mm dia gun metal gate valve complete with PN16 pressure rating, as per specification no. FF-VL/GV

Supplying and erecting 50 mm dia gun metal gate valve complete with PN16 pressure rating, as per specification no. FF-VL/GV

Supplying and erecting stainless steel single outlet hydrant valve fitted with necessary accessories complete as per specification no. FF-VL/HV

Supplying and installing one piece moulded HDPE / fibre water tank for negative suction only, having capacity 1000 litres fitted with necessary accessories complete as per specification no. FF-FFA/PT

Supplying and erecting 63mm dia, reinforced rubber lined (R.R.L.) hose pipe, 15m in length, fitted with necessary accessories complete as per specification no. FF-FFA/RRL

Supplying and erecting stainless steel branch pipe 63 mm dia fitted with 20 mm dia detachable hexagonal nozzle complete as per specifications no. FF-FFA/NZ

Supplying and erecting 150 mm dia fire brigade header suitable for supplying water in fire tank complete as per specification no. FF-FA/FBC

Supplying and erecting fire brigade header ( Siamese connection )of 150 mm dia, for supplying water in fire tank complete as per specification no. FF-FA/FMC

Supplying and erecting 300 mm dia 1.5m in height air vessel / tank fabricated from min 5mm thick M.S. sheet complete as per specification no. FF-FFA/ACT

Supplying and erecting 20/25mm dia gun metal air release cock, with necessary G.I. coupling to be fitted on top of air vessel or on wet riser complete as per specification no. FF-FFA/ARV

Supplying and erecting 100 mm dia. pressure gauge , 0-300 PSI or 0-14 kg per cm square fitted with 12/15 mm dia. pad cock valve, erected with provided G.I. pipe, elbow etc. complete as per specification no. FF-FFA/PG

Supplying and erecting 12/15 mm dia pressure switch with provided isolation valve, G.I. nipple, elbow, etc complete as per specification no. FF-FFA/PS

Supplying and erecting brass orifice plate having 6 mm. thickness, 140 mm outer dia with required diameter of inner hole at every single outlet hydrant valve as per specification no. FF-FFA/OP

Supplying and erecting M.S./CRCA cabinet for housing single hydrant valve of size ( 400 x 400 x 400)mm or hose pipe box of size ( 600 x 600 x 200)mm made from min. 1.5 mm thick CRCA sheet with angle iron work of min. of size (25 x 25 x 4) mm having front doors with viewing glass of size (200x150) mm and locking arrangement with necessary fixing material such as rubber bidding etc. duly painted in post box red colour( Code 538 of IS 5)

Supplying and erecting M.S./CRCA cabinet for housing Floor Hydrant valve, hose pipe, hose reel and branch pipe (size 1000 x 736 x 736 mm.) made from 16 SWG sheet and angle iron 25 x 25 x 4 mm. having front doors with viewing glass (8"x6") and locking arrangement with necessary fixing material such as rubber bidding etc. duly painted in post box red colour( Code 538 of IS 5)

Supplying, installing, testing and commissioning remote response indicators suitable to operate on 5 - 28 V dc supply having FR Polymer ABS Housing complete as per specification no. FF-FAAS/RRI

Supplying, installing, testing and commissioning FR, XLPE armoured cable 2 core 1.5 sq.mm. copper conductor complete erected on wall/ ceiling complete as per specification no. CB-LT/CU…. For FRLS 111+2%=118.88

Supplying, installing, testing and commissioning of micro processor based intelligent addressable main fire alarm panel, central processing unit with the 2 loop capacity and capable of supporting upto 250 devices and detectors per loop, with on-board LCD display with min 16 lines of text, operating at 230 V 50 HZ - AC with inbuilt Battery Backup of a minimum 24 hours in normal condition and 30 min in alarm condition, suitable provision for network connectivity, interfacing with third party equipment via a MODBUS/ OPC/ L-ON interface etc. conforming to IS 15908:2021, IS 2189: 2008, EN 54 & VDS / FM/ UL 864 (10th edition) with 3 years replacement warranty FF-AFAS/CP.

Supplying, installing, testing and commissioning of repeater panel with suitable battery backup of a minimum of 24 hours in normal condition and 30 min in alarm condition, 80 backlit alphanumeric LCD display with inbuilt buzzer to indicate fault/fire alarm, manual control keys for silence/mute and to reset the FACP from the repeater station. Panel size shall not more than 175 x 275 x 65 mm conforming to EN 54 or UL approved with 3 years equipment replacement warranty FF-AFAS/RP

Supplying, installing, testing and commissioning of addressable optical smoke detector, single/twin LED’s with 360 degree view, suitable for low voltage 15 to 32 V DC two wires supply, in-built locking mechanism to check the removal and pilferage of the detector, in built isolation mode, start up current 300µA and alarm condition current shall be maximum 6.5 mA, operating temperature 0°C to 50°C, humidity 0-95% RH, IP 41, conforming to IS 2189: 2008, 11360_1985_Reff2020 EN 54 or UL Approved with 3 years equipment replacement warranty FF-AFAS/SD .

Supplying, installing, testing and commissioning of intelligent addressable thermal/heat detector with rate of rise cum fixed temperature thermistor complete with base as required, suitable for temperature variations from -20°C to 38°C for fixed-heat and rate-of-rise type detectors and 0°C to 66°C for high heat type detectors, in built isolation mode, suitable for offices/ceiling cable trenches/less ventilation area's etc. with 3 years equipment replacement warranty IS : 2175 - 1988 reaffirmed 2000, IS 15908:2021 standards FF-AFAS/SD.

Supplying, installing, testing and commissioning of addressable manual call points ( break glass type/pull station type), made of addressable break glass plastic square in shape surface/flush mounted with "Break Glass" massage embedded on the glass, complete erected with mounting base and required accessories conforming to EN 54 or UL listed with 3 years equipment replacement warranty FF-AFAS/MCP.

Supplying, installing, testing and commissioning of addressable fire control/relay module complete as required, with 3 years equipment replacement warranty conforming to IS 5051Part 2 (Sec 1 to 3) : 1982 reed relays, EN 54 or UL Listed FF-AFAS/CRM

Supplying, installing, testing and commissioning of addressable fire monitor module complete as required. EN 54 or UL Listed with 3 years equipment replacement warranty conforming to IS 5051Part 2 (Sec 1 to 3) : 1982 Reed relays FF-AFAS/MM

Supplying, installing, testing and commissioning of addressable fire isolator module complete as required. EN 54 /FM or UL Listed with 3 years equipment replacement warranty conforming to IS 5051Part 2 (Sec 1 to 3) : 1982 Reed relays FF-AFAS/ISM

Supplying, installing, testing and commissioning of addressable horn cum strobe sound/ hooter, output frequency 500 to 1000 Hz with dB as per Chart given in IS 15908:2021, with flashing at 1 Hz over the strobe’s entire operating voltage range EN 54, conforming to IS 2189: 2008, IS 15908:2021 standards with 3 years equipment replacement warranty FF-AFAS/SSH.

Supplying, erecting, testing and commissioning 120 W amplifier suitable to operate on 230 Volts A.C. / 12 Volts D.C. supply complete as per specification no. FF-PA/AFR

Supplying, erecting, testing and commissioning 15 to 30 Watts sound column or ceiling mounted complete as per specification no. FF-PA/SOC

Supplying, erecting, testing and commissioning stand mounted/handheld type wired microphone having 2 mV/Pa sensitivity, impedance level limit 300 ohms and 50 - 16000 Hz suitable to operate in -10 deg C to +55 deg C with min. 7 metre shielded cable and 3 Pin Professional XLR Connector, stereo jack complete as per specification no. FF-PA/MIC

Supplying, erecting, testing and commissioning rust free microphone table stand of chrome plating/powder coating or S.S. material, up to 500 mm height and suitable base for sturdy mechanism ensuring trouble free movement complete.

Supplying, erecting, testing and commissioning of 2 core shielded cable complete as per specification no. FF-PA/MCC

Supplying, erecting, testing and commissioning of 1.0 sq. mm speaker wire complete.

Supplying & erecting Carbon Dioxide (CO2) fire extinguisher of 4.5 kg. capacity cartridge type conform to IS 2878 /15683 complete erected with necessary clamp made from 50 x 6 mm. M. S. flat with nut & bolts routed in wall complete.

Making cement concrete foundation in 1:2:4 cement concrete with foundation bolts and nuts complete. (cost of wooden box is included) (for pumps).

Carrying out core cutting of size 3" to 5" dia x 15" length in the C.C./rock/stone wall with the help of specialized core cutting machine in proper manner and finishing the site as original.

Providing Round bottom fire bucket of 9 Litres capacity as per IS : 2546 made out of 24 gauge G.I. sheet with extra handle at bottom duly painted white inside and red outside with FIRE Mark, on provided stand/ wall hook complete.

Providing Floor mounting stand for keeping 4 Nos. of FIRE buckets 1500mm in length, 900mm in height frame made out of 30x30x4 mm angle iron with cross supports for legs, welded with 4 hooks and duly painted with one coat of red lead and two coats of silver paint complete.

Supplying and erecting ABC powder type fire extinguisher as per IS : 13849 /15683 of 6 kg capacity with necessary clamp for erection on wall.

Item Sanctioned by the S.E.P.W. Electrical circle Pune forSupplying and erecting of fire Exit & Eire Exinguisher signage indicating the floor number in words & system signages (Fire Extinguisher & Accessories)

Shital Kumar Mohan Nawle

M/s Kranti Construction