SPECIAL REPAIR TO STORM DRAIN IN NOFRA AREA UNDER GE (NW) NOFRA, COLABA, MUMBAI

Amount

Excavation in trenches n exc 1.5m wide and n exc 1.5m depth for foundation etc or for shafts, wells,cesspits, manholes, pier holes etc. n exc 10 sqm on plan and n exc 1.5m in depth and getting out in any type of soil complete all as specified and directed by Engr-in-Charge.

Returning and filling in soil including spreading, levelling, watering and well ramming in layers n.exc.25cm in foundation trenches complete all as specified and directed by Engr-in-Charge.

Removing Excavated material not exceeding 50m and depositing where directed by at a level not exceeding 1.5 M above the starting point complete all as specified and directed by Engr-in-Charge.

Demolition of brick work or stone /boulder masonry built in cement mortar, including all quoins, arches, pillars, etc including removing outside MoD land complete all as specified and directed by Engr-in-Charge.

Demolition of plain cement concrete of any description and in any position including removing outside MoD land complete all as specified and directed by Engr-in-Charge.

Demolition of reinforced cement concrete of any description and in any position including removing outside MoD land complete all as specified and directed by Engr-in-Charge.

Dismantling wrought iron or mild steel works of any description work etc complete all as specified and directed by Engr-in-Charge.

Material and labour for PCC.1:3:6 type C2 (using 40 mm graded crushed stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed by Engr-in-Charge.

Material and labour for brick work with sub class 'B' bricks straight or curved on plan exc 6 m mean radius and built in cement mortar (1:6) complete all as specified and directed by Engr-in-Charge.

Material and labour for cement concrete 1:2:4 type B0 using 12.5 mm graded crushed stone aggregate as in coping including weathering, slightly, rounded, chamfered, angle and throating etc complete all as specified and directed by Engr-in-Charge.

Material & Labour for extra for forming fair finished drain or channel 45 cm inner girth in cement concrete using extra cement including forms, moulds, mitred/stopped ends complete all as specified and directed by Engr-in-Charge.

Material and labour for Rendering 15 mm thick in cement mortar 1:4 and finishing the surface even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.

Material and labour for Reinforced cement concrete M-20 (design mix) using 20mm graded aggregates in slabs supported on walls, beams and columns in floors, roofs, landing, balconies, canopies, deck slab and in shelves and drain covers etc. complete all as specified and directed by Engr-in-Charge.

Material and labour for TMT bars 10mm dia and above, cut to length bend to shape reqd including cranking and binding with mild steel wire (annealed ) not less than 0.9mm dia or securing with clips complete all as specified and directed by Engr-in-Charge.

Material and labour for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exceeding 200 mm thick, rough finished of surfaces of concrete complete all as specified and directed by Engr-in-Charge.

Material and labour for formwork to edges of concrete Flats, treads, breaks in floors, window cills, concrete railings, opening and concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls horizontal or sloping and similar work exc 5 cm but n exc 10 cm wide complete all as specified and directed by Engr-in-Charge.

Supply and fixing 150 mm bore Reinforced concrete pipes, class NP3, laid and jointed complete with collars and complete all as specified and directed by Engr-in-Charge.

Supply and fixing 200 mm dia Reinforced concrete pipes, class NP3, laid and jointed complete with collars and complete all as specified and directed by Engr-in-Charge.

Supply and fixing 300 mm dia Reinforced concrete pipes, class NP3, laid and jointed complete with collars and complete all as specified and directed by Engr-in-Charge.

Material and labour for PCC 1:3:6, type C2 using 40mm graded crushed stone aggregate as in bed to drain pipes of 150 mm bore dia including packing under , and haunching against the sides of pipes after they are laid and tested complete all as specified and directed by Engr-in-Charge.

Ditto all as per Item No 20.00 but 200 mm bore complete all as specified and directed by Engr-in-Charge.

Ditto all as per Item No 20.00 but 300 mm bore complete all as specified and directed by Engr-in-Charge.

Supply and fixing rolled mild steel sections Joist, channel, angle, or tee sections Fe 410 -W(Gde-E- 250) quality-A, fixed independently, without connecting plates, etc (cut to ordinary lengths i.e. within 20mm of the length indicated) complete all as specified and directed by Engr-in-Charge.

Supply and fixing mild steel framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290, Gde-E-165 complete all as specified and directed by Engr-in-Charge.

Supply and fixing cast iron work grade FG 150, unmachined, in brackets, gully traps, gratings, railing, frames, manhole covers, fire and soot doors, dampers, stop valve boxes, gate stops, parts of ranges, balusters and similar articles exc 5kg each complete all as specified and directed by Engr-in-Charge.

Material and labour for preparation of new steel surfaces exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engr-in-Charge.

Dismantling floor hearth or wall tiling including cement mortat bedding but not backing),and rubbish off the premisescomplete all as specified and directed by Engr-in-Charge.

Material and labour hardcore of gauge n. exc 63mm of brocken stone or boulders, deposited, spread and levelled in layers n exc.15 cm thick watered and rammed to a true surface complete all as specified and directed by Engr-in-Charge.

Material & Labour for providing 75 mm thick cement concrete (1:4:8) type D-2 (using 40mm graded crushed stone aggregates) as in sub base complete all as specified and directed by Engr-in-Charge.

Material and labour for 10-12mm thick digital heavy duty unglazed coloured vitrified outdoor tiles in size (300mm x 300mm) with anti-skid, high chemical & stain resistance, high abrasion resistance, low water absorption very high colour resistance etc properties set and jointed in neat cement slurry in floors over 15mm thick screed in CM 1:6 pointed in white or coloured cement to match complete all as specified and directed by Engr-in-Charge. (Design and colours shall be approved by GE).

Material and labour for precast cement concrete (1:2:4) type B-1(using 20 mm graded crushed stone aggregate) in cement mortar 1:4 for kerb stone blocks or slabs 10cm thick etc complete all as specified and directed by Engr-in-Charge.

Supply & fixing rolled mild steel plates Fe 410-W Gde E-250 quality A plates (plain or chequered), square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment complete all as specified and directed by Engr-in-Charge.

Nilesh Construction

M/s. MAYUR ENTERPRISES

satguruenterprises

jalandhara construction

S S ENTERPRISES

Darpan Construction

SN CONSTRUCTION