SPECIAL REPAIRS TO BOAT WORKSHOP BLDG NO P-8 AT INS CHILKA UNDER GE CHILKA

Amount

Taking down existing waterproofing treatment complete of any description from brick or RCC wall and RCC slab by scrapping including removal of rubbish where directed to a distance not exceeding 100M complete all as specified and as directed.

M&l water proofing treatment to roof as per per manufacturer's instructions with the following specification:-. (a) 10 mm thick plastering in cement mortar 1:4 mixed with and including water proofing compound @3% by weight of cement including preperation of roof surfaces. (b) Applying evenly a coat of bitumineous primer @ 0.5 litre per Sqm (c) Applying evenly a coat of hot blow bitumen 85/25 grade @ 1.2 Kg per Sqm (d) Applying APP based polymeric membrane minimum 3 mm thick and minimum weighing 3kg/sqm laid on primed surface by LPG forced torch application with a side & end overlaps of minimum 100 mm. (e) Applying evenly a coat of hot blown bitumen 85/ 25 grade @ 1.2 Kg per Sqm over water proofing membrane (f) Applying a coat of bituminous based aluminium primer @ 100 gm/Sqm on top including sealing all joints by thermo fusion complete all as per manufacturer's instructions (g) Testing for water tightness by water ponding at least 72 hours

Dismantling of floor, health or wall tiling including cement mortar bedding (but not backing) removing rubbish off the premises complete all as specified and as directed.

M&L Non - skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with including 15mm thick screed bed in cement mortar 1:4 complete all as specified and as directed.

M&L for Glazed ceramic coloured tiles in vertical surface 350mmx250mm or 450mmx350mmx 6 to 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match with including 10mm thick rendering in cement mortar 1:4 complete all as specified and as directed.

Demolition of Stone slabs and tiles laid bedded and pointed in any mortar of any description or thickness in floors, aprons etc complete all as specified and directed.

M&L 18 to 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills,cooking platforms and like in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite over and including 15 mm thick screed bed or bedding layer in cement mortar 1:4 complete all as specified and as directed.

Taking down chowkhats or frames not exceeding 1.5 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and as directed.

Taking down chowkhat with shutters exceeding 1.5 sqm but not exceeding 4.0 sqm (without taking off shutters from the frames) complete all as specified and as directed.

S&F powder coated (minimum thickness of powder coating 50 micron) anodised aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed.

S&F powder coated of any colour (thickness of powder coating not less than 50 micron) anodised aluminium door shutters of side hung type with aluminium sections weighing 1.00 Kg/m including necessary joining cleats, glazing clips, rubber paking, anodised aluminium snap beading, neoprene packing, screws,anodised aluminium fittings such as handles 2 Nos and 4 Nos hinges in each shutter, tower bolt 150mm long 2 Nos etc complete all as specified and as directed. Note :- Glass or particle board shall be measured and paid seperately under respective item as considered therein.

S&F powder coated of any colour (thickness of powder coating not less than 50 micron) anodised aluminium window / ventilator shutters, fixed type without sash bars, aluminium sections weighing 0.55 Kg/m including necessary joining cleats glazing clips, rubber packing, anodised aluminium snap beading, screws etc complete all as specified and as directed. Note :- Glass or wire cloth shall be measured and paid seperately under respective item as considered therein.

S&F powder coated of any colour (thickness of powder coating not less than 50 micron) anodised aluminium window/ventilator shutters of sliding type without sash bar, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, rollers, holding and with locking arrangements complete all as specified and as directed. Note :- Glass shall be measured and paid seperately under respective item as considered therein.

S&F powder coated of any colour (thickness of powder coating not less than 50 micron) anodised aluminium window / ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 Kg/m including necessary joining cleats glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150 mm long (1 No) ,75mm long hinges type B-21 (2 No) ,suitable handle (1 No) with aluminium flat and screws complete all as specified and directed.

S&F for anodised powder coated of any colour (thickness of powder coated not less than 50 micron) aluminium grill of make "Deco grill" and DG-202 model with aperature size 60mmx45mm fixed with suitable channel complete all as specified as directed.

Supply only 4.8 mm thick plain/ frosted sheet glass ,ordinary quality, in square not exceeding 0.5 Sqm each pane fixed to aluminium joinery complete all as specified and as directed.

S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples and fixed in aluminium joinery complete all as specified and as directed.

S&F 12 mm thick pre-laminated particle board, exterior grade, pre-laminated one side with decorative choice lamination and other side balancing white lamination, fixed to aluminium joinery complete all as specified and as directed.

S&F 4 levers brass mortice lock, vertical type, size 100 mm complete all as specified and as directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm single side prelam PVC Sheet & edges will be painted to match with prelam sheet reinforced with M.S Square tube, in opening as per specification & drawing complete all as specified and as directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (Style) consisting of frame made out of M.S tubes for top & bottom rails, M.S frame shall be covered with beat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined toghther with solvent cement, suppling & fixing in the frame at site as per specification and drawing complete all as specified and as directed.

S&F 2nd class hard wood plain, solid straight chowkats and frames, wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and as directed.

S&F 35 mm thick, 2nd class hard wood, plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers; supplied & fitted to chowklats complete all as specified and as directed.

S&F 100 mm long butt hinges, medium weight, cold rolled mild steel complete all as specified and as directed.

S&F 150 mm long extruded aluminium alloy handle, fabricated type anodised complete all as specified and as directed.

S&F 125 mm long extruded aluminium alloy handle, fabricated type anodised complete all as specified and as directed.

S&F 300 mm long, aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded section & fixing blots & sliding bolts of extruded section or cast aluminium alloy complete all as specified and as directed.

S&F 250 mm long, aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded section & fixing blots & sliding bolts of extruded section or cast aluminium alloy complete all as specified and as directed.

S&F 150 mm long aluminium anodised, barrel tower bolts of extruded section complete all as specified and as directed.

S&F 125 mm long aluminium anodised, barrel tower bolts of extruded section complete all as specified and as directed.

S&F 300 mm mild steel , ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.

M&L applying two coats of synthetic enamel paint over a coat of pink primer including preperation of new wooden surfaces of any description exceeding 10 cm width or girth complete all as specified and as directed.

S&F 1000 Litres capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including provision of inlet, outlet overflow and wash out connections,20 mm dia bore ball valve, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (minimum weight 210 gram) including dismantling existing unserviceable water tank complete all as specified and as directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for and disposal of unserviceable material to a distance not exceeding 100 M complete all as specified and as directed.

M&L 75 mm thick cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregate as in sub base of flooring, surface finished even and fair to receive further finishes complete all as specified and as directed.

M&L 40 mm thick cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in flooring, surface finished even and fair complete all as specified and as directed.

M&L for 15mm thick wearproof topping (heavy duty) by mixing hardner and cement to an even colour in dry state in the proportion as per manufacturer's instruction. This mixture shall be mixed with crushed granite or basalt or trap of size 6 mm and down in the proportion 1:2 by volume and by adding requiste amount of water to form a workable mixture, laid on concrete floors and pavings, and finished even and smooth complete all as specified and as directed. Note:- Metallic floor hardner shall be measured and paid seperately.

Suppy only metallic floor hardner complete all as specified and as directed.

M&L 75mm thick cement concrete 1:3:6 type C-2 using 40mm garaded stone aggregate as in plinth protection,laid in alternate panel including necessary use and waste of form work as requieed, surface finished even and fair complete all as specified and as directed .

Supply only 3 mm thick and 22mm width of glass dividing strips, inserting in position confirm to design complete all as specified and as directed.

Taking up or down 15 mm bore steel tubing and connections, including cleaning for re-fixing or removal from site complete all as specified and as directed.

Taking up or down 20 mm bore steel tubing and connections, including cleaning for re-fixing or removal from site complete all as specified and as directed.

Taking up or down 25 mm bore steel tubing and connections, including cleaning for re-fixing or removal from site complete all as specified and as directed.

S&F 15 mm bore galvanised iron tubes, 'medium grade' with all fittings such as bends, elbow. reducer, socket etc and fixed complete to walls and ceilings or laid in floor complete all as specified and as directed.

S&F 20 mm bore galvanised iron tubes, 'medium grade' with all fittings such as bends, elbow. reducer, socket etc and fixed complete to walls and ceilings or laid in floor complete all as specified and as directed.

S&F 25 mm bore galvanised iron tubes, 'medium grade' with all fittings such as bends, elbow. reducer, socket etc and fixed complete to walls and ceilings or laid in floor complete all as specified and as directed.

S&F in repair 75 mm diameter of outlet PVC (SWR) floor trap with grating including jointing with solvent cement complete all as specified and as directed.

S&F in repair 4'' inch dia round shape floor trap doom type , chromium plated complete all as specified and as directed. Make :- Prayag cat No FT-03M or equivalent as approved

S&F in repair vitreous China squatting pan, ‘Orissa’ pattern, size 580 mmx 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) including necessary connection complete all as specified and as directed.

S&F in repair vitreous china wash down water closet pan (Pedestal pattern) ,white including white colour seat cover, fixing bolts (excluding flushing cistern & flush pipe) including necessary connection to trap and flushing pipe complete all as specified and as directed.

S&F in repair PVC low level flushing cistern of 10 litre capacity fixed including syphonic action type,ball valve, float and handle including brackets etc complete all as specified and as directed.

S&F in repair plastic water closet seat, white ,closed pattern with flat bottom and mild steel chromium plated or aluminium hinging device complete all as specified and as directed.

S&F in repair vitreous china wash hand basin, white, flat back of size 580mm X 450mm with brackets including 15 mm bore chromium plated pillar tap complete all as specified and as directed.

S&F in repair vitreous china urinal bowl flat back, size of 465mm X 355 mmX 265mm white( minimum) with grating and union and waste coupling including fixing plugs, beading urinal against wall in cement mortar 1:2 securing urinals to plugs including 60mm long brass screws, pointing around urinal back in cement complete all as specified and as directed.

S&F urinal spreader of PTMT any colour for fixing with 15 mm dia pipe (minimum weight 60gms) complete all as specified and as directed.

S&F Health faucet 1.5 m tube with hook and including all necessary fittings complete all as specified and as directed. Make:- Prayag Cat no BEA-100 or equivalent as approved.

S&F in repair 15mm bore dia, Bib taps chromium plated , fancy type screwed down for iron pipe and fixed complete all as specified and as directed.

S&F in repair PVC soap tray fixed with screw in the wall complete all as specified and as directed. Make :- Prayag Cat No 195 or equivalent as approved.

S&F in repair Brass chromium plated tubular rail, 20mm dia, D type 600mm long between flanges and fixed complete all as specified and as directed.

S&F in repair 15 mm bore dia stop valves ,fancy type , chromium plated with crutch or butterfly handle,screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.

S&F in repair 15 mm bore dia angle valve chromium plated ,fancy type, screwed down high pressure screwed at the ends for iron pipe or union with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed Make : Parryware cat No G5307A1 or equivalent as approved.

S&F in repair PVC connections 15mm size with PTMT nuts and washers of length 600mm complete all as specified and as directed.

M&L for 40mm waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and as directed.

S&F 40 mm bore and 75 cm long PVC waste pipe for WHB, sink etc complete all as specified and as directed.

S&F in repair Brass chromium plated shower rose of size 125 mm with swivel joint for fixing to GI pipe of 15mm dia complete all as specified and as directed.

Taking down cement plaster on brick or stone wall or on concrete surfaces including racking out joints, hacking for key, scrubbing down with water complete all as specified and as directed.

M&L 15 mm thick rendering on brickwork or concrete surfaces of wall in cement mortar 1:6, surface finished even and fair complete all as specified and as directed.

M&L 5 mm thick rendering in cement mortar 1:3 on ceiling , surface finished even and fair complete all as specified and as directed.

M&L for applying two coats of weather proof acrylic emulsion (Anti dust) paint exterior grade (100% acrylic) over a coat of primer on plastered surfaces of walls of any description over 10 cm width or girth etc complete all as specified and as directed.

M&L for applying two coats of oil bound distemper over a coat of alkali resistant primer over 1 mm thick wall care putty including preperation of newly plastered surfaces of wall complete all as specified and as directed.

M&L applying three coat of white wash on ceiling including preparation of newly plastered surfaces of ceiling complete all as specified and as directed.

M&L applying three coat of white wash on wall including preparation of newly plastered surfaces of wall complete all as specified and as directed.

M&L for applying two coats of weather proof acrylic emulsion (Anti dust) paint exterior grade (100% acrylic) over a coat of primer on old decorated external surfaces of walls of any description over 10 cm width or girth etc on column/ pillars, RCC chhajja and facia etc including complete removal of existing treatment complete all as specified and as directed.

M&L for applying two coat of white wash on ceiling including preparation of old decorated plastered surfaces of ceiling complete all as specified and as directed.

M&L for applying two coats of oil bound distemper over a coat of alkali resistant primer over and including 1 mm thick wall care putty including complete removal of existing treatment of old decorated surface of wall complete all as specified and as directed.

M&L applying two coat of aluminium paint of approved shade including preparation of old painte steel surfaces of complete all as specified and as directed.

M&L for applying two coat of white wash on walls including preparation of old decorated plastered surfaces of wall complete all as specified and as directed.

Dismantling of wall and ceiling board (fibre, pulp,insulation etc) or insulation boards/slab/blankets any thickness including cover fillets complete all as specified and as directed.

M&L for applying applying two coats of oil bound distemper of approved shade over and including 1mm thick wall care putty on ceiling including preparation of surfaces complete all as specified and as directed

S&F GI frame work for seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27 mm fixed to sorrounding wall using nylon sleeves and screws at 450mm center to center/ intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm center to center with GI cleat and steel expansion fasteners with including ceiling section(n.exc 1.2m length)of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to intermediate channel at 457mm center to center of grid size 605mm x 605 mm including hangers 6 mm dica, galvanised iron upto 1200 mm length adjusting level fixed to roof slab by means of ceiling cleats made out of galvanised iorn flat 40mmx3mm size 60 mm long and expansion hold fasteners 12.5 mm dia , 40 mm long complete all as specified and as directed.

M&L for 12mm thick gypsum board in ceiling fixed with screws as per manufacutrer's instructions complete all as specified and as directed

Demolition of reinforced cement concrete in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition) complete all as specified and as directed.

M&L cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in lintels upto 1.5m clear span, cills, copings, kneelers, apex stones, bed plates, kerbs and the like including weathering, slightly rounded or chamfered angles and throating including necessary use and waste of form work complets all as specified and as directed.

M&L Mild steel TMT bar 10mm dia and over cut to length bent to shape required including cranking bending spirally for hooping for column hooking end and binding with and including mild steel wire(annealed) not less than 0.9mm dia or securing with clip complete all as specified and as directed.

M&L for chequered cement concrete tiles 30cm x 30cm x 25mm thick, set jointed and pointed in neat cement slurry with grey cement and pigment over and including 15mm thick screed bed or bedding layer in cement mortar 1:4 complete all as specified and as directed.

Demolition of brick or stone masonary work built in cement mortar including all quoins ,arches,pillars etc complete all as specified and as directed.

M&L for brick work with fly ash bricks, straight or curved on plain exceeding 6m means radius built in cement mortar 1:6 complete all as specified and as directed.

M&L brickwork with fly ash bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and as directed.

M&L 15 mm thick rendering on brick work, concrete surfaces or stone wall surface in cement mortar 1:4 mixed with water proofing compound @ 3% by weight of cement , surface finished even and fair complete all as specified and as directed. Note:-Water proofing compound shall be measured and paid separately under respective item.

Supply only water proofing compound complete all as specified and as directed.

Taking down carefully copper / aluminium point wiring(light,fan,socket or power) complete along with fittings such as switches, sockets, ceiling rose , lamp holder, tube light fittings and making good distrubed surfaces of walls or ceiling etc to match with the existing complete all as specified and as directed.

M&L for point wiring with 1.5 sqmm PVC FRLS insulated unsheathed multistranded copper cable with 1.5 sqmm PVC FRLS insulated multistranded copper cable as earth continuity drawn in including concealed PVC conduit not less than 20mm dia with pressed mild steel concealed box made out of 1.6 mm thick sheet overed with 3mm thick laminated sheets for mounting for mounting switches/sockets etc and other accessories such as spacers, saddles, junction boxes for one light / fan point / bell point/5 amp socket controlled by one switch complete all as specified and as directed.

M&L for point wiring with 1.5 sqmm PVC FRLS insulated unsheathed multistranded copper cable with one run of 1.5 sqmm PVC insulated copper cable as earth continuity drawn in including surface stove enamelled steel conduit dia not less than 20 mm with pressed mild steel concealed box made out of 1.6 mm thick sheet covered with 3 mm thick laminated sheets for mounting switches/sockets etc and other accessories such as spacers, saddles, junction boxes for one light /Exhaust fan point/5 amp socket controlled by one switchcomplete all as specified and as directed.

All as per item No 93 above but one socket outlet, three pin, 5/6 Amp on the same board with other switches complete all as specified and as directed.

All as per item No 93 above but with 2.5 sqmm PVC insulated unsheathed multistranded copper FRLS grade cable with one run of 2.5 sqmm PVC FRLS insulated copper cable as earth continuity for power point on independent board complete all as specified and as directed.

All as per item No 93 above but with 4.0 sqmm PVC insulated unsheathed multistranded copper FRLS grade cable with one run of 4.0 sqmm PVC FRLS insulated copper cable as earth continuity for power point on independent board complete all as specified and as directed.

S&F switch piano, flush type, single pole, one way, 5/6 Amp, complete all as specified and as directed.

S&F switch socket outlet 2 in 1, 3 pin 5 Amp, 230 volt, complete all as specified and as directed.

S&F switch socket combination , 3 pin 16 Amp, 230 volt, complete all as specified and as directed.

S&F ceiling rose, surface bakelite 65mm x 30mm, three terminals over and including PVC box of size 3"x3" round type complete all as specified and as directed.

S&F five stepped type electronic fan regulator for ceiling fan of any sweep including necessary connection complete all as specified and as directed.

Taking down carefully sub main wiring including batten/ conduit by unscrewing from wall,ceiling and making good surfaces to match with existing complete all as specified and as directed.

M&L sub main wiring with 2 runs of 6.0 sqmm PVC FRLS insulated unsheathed copper cable multistandard 1100 V drawn in and including concealed PVC Conduit not less than 25mm dia and one run of PVC FRLS insulated unsheathed 6.0 Sqmm copper cable as earth continuity conductor with all accessories complete all as specifed and as directed. Note :- 2 runs of 6.0 Sqmm, 1 run of 6.0 Sqmm copper earth wire and 01 run of PVC conduit shall be measured as one unit length.

M&L sub main wiring with 4 runs of 4.0 sqmm PVC FRLS insulated unsheathed copper cable multistandard 1100 V drawn in and including concealed PVC Conduit not less than 32 mm dia and one run of PVC FRLS insulated unsheathed 4.0 Sqmm copper cable as earth continuity conductor with all accessories complete all as specifed and as directed. Note :- 4 runs of 4.0 Sqmm, 1 run of 4.0 Sqmm copper earth wire and 01 run of PVC conduit shall be measured as one unit length.

M&L sub main wiring with 4 runs of 6.0 sqmm PVC FRLS insulated unsheathed copper cable multistandard 1100 V drawn in and including concealed PVC Conduit not less than 32 mm dia and one run of PVC FRLS insulated unsheathed 6.0 Sqmm copper cable as earth continuity conductor with all accessories complete all as specifed and as directed. Note :- 4 runs of 6.0 Sqmm, 1 run of 6.0 Sqmm copper earth wire and 01 run of PVC conduit shall be measured as one unit length.

M&L sub main wiring with 4 runs of 10 sqmm PVC FRLS insulated unsheathed copper cable multistandard 1100 V drawn in and including surface PVC Conduit not less than 32 mm dia and one run of PVC FRLS insulated unsheathed 6.0 Sqmm copper cable as earth continuity conductor with all accessories complete all as specifed and as directed. Note :- 4 runs of 10.0 Sqmm, 1 run of 6.0 Sqmm copper earth wire and 01 run of PVC conduit shall be measured as one unit length.

M&L sub main wiring with 2 runs of 4.0 sqmm PVC FRLS insulated unsheathed copper cable multistandard 1100 V drawn in and including concealed PVC Conduit not less than 25mm dia and one run of PVC FRLS insulated unsheathed 4.0 Sqmm copper cable as earth continuity conductor with all accessories complete all as specifed and as directed. Note :- 2 runs of 4.0 Sqmm, 1 run of 4.0 Sqmm copper earth wire and 01 run of PVC conduit shall be measured as one unit length.

S&F sheet metal enclosure single pole and neutral with two pin and earth plug and socket complete with on single pole MCB 20 Amp complete complete all as specified and as directed. Make:- C&S Electric Ltd/Standard/Havells.

M&L for spray painting with white synthetic enamel paint including preparation of old surface of the ceiling fan of any make/model/sweep, filling cavities with filler after cleaning dust in situ or in other position complete all as specified and as directed. Make :- Berger paint(Luxol)/Asian paint (Apcolite) / Jenson & Nicholson paint Ltd (Brolac)

Taking down defective ceiling fan from its position and refixing the same after necessary minor repair to make its functional complete all as specified and as directed.

S&F in repair capacitor/ condenser of ceiling fan 2.5 mfd of approved make complete all as specified and as directed. Make :- Nicco/Havells/Universal

S&F in repair of ball bearing 6201 / 6202 / 6203 including metal filling, machining if required complete all as specified and as directed. Make :- SKF/NBC as approved

S&F in repair of fan clamp with nut & bolt and rubber bush suitable for ceiling fan of any sweep and make complete all as specified.

M&L for rewinding of ceiling fan motor of 1200 mm sweep of any make with super enameled copper wire of existing gauge including replacement of insulating materials such as laminated lethroid paper, sleeves, necessary varnishing with golden colour varnish, greasing the bearings, replacement of missing / worn out nuts, bolts and washers, split pins etc complete all as specified and as directed

Taking down carefully existing unserviceable MCB DBs with MCBs any type by unscrewing from wall,ceiling and making good surfaces to match with the existing complete all as specified and as directed.

S&F Vertical distribution board with MCCB 12 way including provn of 4 pole MCCB 100 Amp,36 KA,415 V thermal magnetic release as Incomer complete all as specified and as directed. Make:- C&S/Standard/Havells

S&F MCCB 100 Amp,4 pole , 415 Volt, 35 KA thermal magnetic release ,adjustable type as per site requirement complete all as specified and as directed. Make:- C&S/Standard/Havells

S&F factory made sheet metal enclosure for DBs double door fixed flush to the wall, SPN, 240 volt, 8 way, IP-42 protection with 200 Amp rated bus bar and 1.5 sqmm copper PVC sheathed stranded cable for earth continuity and suitable for housing MCB’s complete all as specified and as directed. Make:- C&S Electric Ltd /Standard/Havells

S&F factory made sheet metal enclosure for DBs double door fixed flush to the wall, SPN, 240 volt, 6 way, IP-42 protection with 200 Amp rated bus bar and 1.5 sqmm copper PVC sheathed stranded cable for earth continuity and suitable for housing MCB’s complete all as specified and as directed. Make:- C&S Electric Ltd /Standard/Havells

S&F factory made sheet metal enclosure for DBs single door fixed flush to the wall, SPN, 240 volt, 6 way, IP-42 protection with 200 Amp rated bus bar and 1.5 sqmm copper PVC sheathed stranded cable for earth continuity and suitable for housing MCB’s complete all as specified and as directed. Make:- C&S Electric Ltd /Standard/Havells

S&F factory made sheet metal enclosure for DBs single door fixed flush to the wall, SPN, 240 volt, 4 way, IP-42 protection with 200 Amp rated bus bar and 1.5 sqmm copper PVC sheathed stranded cable for earth continuity and suitable for housing MCB’s complete all as specified and as directed. Make:- C&S Electric Ltd /Standard/Havells

S&F Factory made sheet metal enclosure for DBs double door (fixed flush to the wall), TPN, 415 volt, 4 Way, IP-42 protection with 200 Amp rated bus bar and 6.0 sqmm copper PVC sheathed stranded cable for earth continuity and suitable for housing MCB’s complete all as specified and as directed. Make:- C&S Electric Ltd/Standard/Havells.

S&F MCB 6 to 32 Amp, 240 Volt, SP, breaking capacity 10 KA 'C' series, complete all as specified and as directed. Make:- C&S Electric Ltd/Standard/Havells.

S&F MCB 32 Amp, 240 Volt, SPN, breaking capacity 10 KA 'C' series, complete all as specified and as directed. Make:- C&S Electric Ltd/Standard/Havells.

S&F MCB 63 Amp,415 Volt, 50 Hz,TPN 415 complete all as specified and as directed. Make:- C&S Electric Ltd/Standard/Havells.

S&F 18 W tubelight fitting with lamp, Endura linear LED Wall mounted LED batten with polycarbonate housing & intergated driver for efficient heat dissipation with complete fitting complete all as specified and as directed. Make:- Havelsl cat part No LUMILINEBS18WLED865SPCWH or Bajaj cat part No. BCLSB 18 WH

S&F in replacement of LED street light 25W, made up of pressure die cast aluminium housing with high power LED as lighting source and lens embeded PC cover having top opening separate driver compartment with IP 66 protection and impact resistance of IK07 complete all as specified and as directed . Make :- Bajaj Cat Part No.ENXT P 30L WH CR PC SD 25W or Havells Cat Part No : VILUMINASL25WLED757SASYBOPC as approved.

S&F Exhaust fan 300 mm sweep, 900 RPM, metal body heavy duty, AC single phase,230 V including louvers and necessary connection with multistanded copper conductor flexible copper wire of suitable size from ceiling rose to connector of fan and necessary fixing arrangement ie anchor bolts,nuts, washers and making good to the disturbed surfaces to match with the existing complete all as specified and as directed . Make :- Bajaj /Havells/Crompton Greaves /Khaitan/Almonard as approved.

S&F of wall mounted air circulator fan, 450 mm sweep 1400 RPM, heavy duty, AC single phase, 230 volts including connection with multistranded copper conductor flexible wire of suitable size from ceiling rose, necessary fixing arrangement with the wall and making good to disturbed surface to match with the existing complete all as specified and as directed. Make :- Havells/Khaitan/Almonard/Crompton Greaves

M&L cutting opening through brick/stone wall built in cement mortar for fixing exhaust fan of 300 mm sweep and making good the disturbed surface in cement mortar 1:4 and applying two coats of white wash to match with the existing complete all as specified and as directed.

M&L Earthing complete with galvanised steel earth plate electrode 600x600x6mm thick, buried directly in ground (earth pit not less than 2.25 M deep below ground level ) with top edge of the plate not less than 1.5 M below normal ground level, connected to galvanised earth lead wire 4.0 mm dia upto 7.5 M in length from earth plate by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 of SSR Part-2009, connected to earthing with DBs all as specified including excavation and earth work in any type of soil, PCC 1:3:6 type C-1 using 20mm graded stone aggregate in chamber and 40mm thick RCC 1:2:4 type B-1 using 20mm graded stone aggregate as in cover slab, reinforced, with 8mm dia TMT bar at 150mm c/c both ways, 15mm dia GI pipe light grade for earth lead protection, 20mm dia GI medium grade pipe for watering , funnel etc complete all as specified and testing on completion.

ABHIMANYU MAHARANA

RCB CONSTRUCTION

BHARAT KUMAR BALL

D RAVICHANDRAN

PRADIPTA KUMAR PANI

PABITRA MOHAN PARIDA

VAIKUNTHA PARIDA