Electrification of New Canteen, Rest Room and Toilets at New Gate No.1.

Amount

(A) Supply Part :

Supply of Suspended type, 40 Watt twin LED light fitting complete with lamps with extended stainless steel wire rope / GI pipe down rod of size 600 mm length.

Supply of 1400 mm sweep Ceiling fan.

Supply of Industrial exhaust fan having size: 450 mm, 6 no. of pole, capacitor type & Class of insulation : Class E.

Supply of 300 mm sweep Exhaust fan.

Supply of 90 Watt LED streetlight fitting.

Supply of 09 watt LED Lamp.

Supply of Calling Bell.

Supply of 1.5 Ton Split AC with copper Tubes for both indoor & outdoor units as per scope of work.

Supply of 250 Amp. Feeder Pillar having 4-Pole MCCB as incoming and outgoing 02 nos. of having 125 Amp. MCCB as out going.

Supply of Wall mounted distribution board having 01 No 125A, 4 pole MCCB as incomer and 4 Nos. 32A DP MCB as outgoing with bus bar and indicator.

Supply of 3.5 C x 120 sq.mm, 1.1KV grade G.I armoured XLPE insulated stranded aluminium conductor cable.

Supply of 3.5 C x 70 sq.mm, 1.1KV grade G.I armoured XLPE insulated stranded aluminium conductor cable.

(B) Execution Part :

Fixing of twin LED light Fitting

Wiring to suspended type 40 watt twin LED light point with 6/10 Amp. switch and copper wire alongwith Ceiling rose , board & plate as per scope of work.

Fixing of Ceilling Fan

Wiring to ceiling fan point with 6 Amp. flush type switch, regulator, Ceiling Rose, board & plate as per scope of work

Fixing of Exhaust Fan

Wiring to Exhaust Fan point with 6/10 Amp. flush type switch alongwith board & plate as per scope of work.

Fixing of 90 watt LED street light fitting with supply of G.I bend pipe as per scope of work.

Wiring to 90 watt LED Streetlight fitting with 10 Amp. MCB & 3 C x 1.5 sq. mm copper flexible cable.

Wiring and fixing of 09 watt LED lamp point with 6 Amp. flush type switch, angle holder, board & plate as per scope of work.

Wiring to A.C Point with 4 sqmm copper flexible wire along with earth wire and supply & fixing of 32 Amp. DP MCB & 16Amp. Socket with Plug Top as per scope of work.

Fixing of Call Bell Point

Wiring to call bell point with bell Push Switch alongwith Board & Plate as per scope of work.

Installation of 250 Amp. Feeder Pillar after making of brick foundation including cable Connection as per scope of work.

Installation of Wall mounted distribution board having 01 No 125A, 4 pole MCCB as incomer and 4 Nos. 32A DP MCB as outgoing with bus bar and indicator.

Wiring to 6 Amp. Plug point with supply of switch & socket along with board & Plate as per scope of work.

Supply & wiring to 6 Amp. two way switch along with Board & Plate as per scope of work.

Wiring to 16 Amp. Plug point with supply of switch & socket along with board & Plate as per scope of work.

Supply & wiring to 06 way BDB having 6/10 Amp. Single Pole MCBs as per the scope of the work.

Supply & wiring to 06 way BDB having 32 Amp. Double Pole MCBs as per the scope of the work.

Supply & fixing of 12 way BDB having 32 Amp. Double Pole MCBs as per the scope of the work.

Excution of Earthing and necessary connections with 50 mm G.I flat to the earth points as per IE rule.

Making of Kutcha cable trench of size 750 mm Depth x 300 mm Width in hard soil of 3.5 C X 70 Sq.mm cable and 3.5 C X 120 Sq.mm cable with dressing and levelling.

Laying of 3.5 C x 70 sq.mm, 1.1KV grade G.I armoured XLPE insulated stranded aluminium conductor cable.

Laying of 3.5 C x 120 sq.mm, 1.1KV grade G.I armoured XLPE insulated stranded aluminium conductor cable.

Note: We hereby confirm that the above quoted price is inclusive of all taxes, duties, cess etc. and all other incidentals like transport, insurance etc. excluding GST and a firm landing price at Paradip Port Authority.

M/s.TULSHI ENTERPRISES

NIGAM MULTI PROJECT