GE(S) BTD 40 OF 2024-25 REPAIR REPLACEMENT OF INTERNAL UNSERVICEABLE POINT WIRING REWIRING FITTING FIXTURES DBs SUB MAIN WIRING SWITXCCHES AND CONNECTED ACESSORIES WORK IN AIRAWAT ENCLAVE ALBEKKA ENCLAVE MANSA COLONY AND SECTOR IV UNDER AGE EM IV

Amount

Taking down carefully existing copper/Aluminum point wiring (light,fan, socket or power) complete including fixture and fittings such as switches, bell pushes, ceiling roses, pendents, regulators, sockets, light fitting, call bells etc removiing materials to store for keeping in safe custody or for taking credit(credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors etc. to match existing color complete all as specified and directed.

M&L for flame proof point wiring for one light point controlled by one way flame proof switch with 1.5 Sqmm (nominal area) PVC insulated, unsheathed multi strand copper conductor cable FRLSH in and including ERW stove enameled surface rigid conduit 20 mm dia heavy duty ISI marked, accessories such as flame proof joint/junction boxes, bends, corners, tees,unions, reducers, nipples etc.all in LM6, screws, clips, clamps etc. and including PVC insulated unsheathed 1.5 sqmm copper conductor cable FRLSH connected to common earth dolly complete and then making good the distributed surfacess completely matched and finished with existing surfacess to be included in the quoted rate complete all as specified and directed.

All as per srl item No. 2.00 (here-in-before) but for each additional light point on the same switch circuit.

Material and labour for one light / fan point controlled by one, one way switch 06 Amp wiring with 1.5 Sq mm nominal cross sectional area, single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed FRLS copper conductor cable with and including continuous earth wire of size 1.5 Sq mm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLSH copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 20 mm dia in medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall complete and including modular metal flush boxes not less than 1.6mm thick alongwith modular cover plate with frame of any size for mounting of any type modular switches/sockets/bell switch /fan regulator and brass screws, cup washers etc complete, making good the distributed surfacess completely matched and finished with existing surfacess including painting of walls etc complete all as specified and directed.

All as per srl item No. 4.00 (here-in-before) but One 3 pin socket outlet 6 Amp on same board point, complete all as specified and directed

All as per srl item No. 4.00 (here-in-before) but One 3 pin socket outlet 6 amp on the independent board point complete all as specified and directed

All as per srl item No. 4.00 (here-in-before) but One bell point controlled by one bell push on independent board complete all as specified and directed.

All as per srl item No. 4.00 (here-in-before) but One light point controlled by two way switch complete all as specified and directed

All as per srl item No. 4.00 (here-in-before) but for 15/16 Amp socket out let by using 2.5 Sqmm PVC insulated unsheathed copper conductor cable FR-LSH multi strand on independent board including provn of 4.0 Sqmm unsheathed, multi stranded copper conductor cable FR-LSH continues as earth wire connected to earth dolly etc complete all as specified and directed

M & L for point wiring for one light / fan point controlled by one switch with 1.5 Sqmm (nominal area) PVC insulated, unsheathed multi stranded copper conductor cable FR-LSH in existing conduit, and existing sunken boxes but including 3 mm thick phenolic laminated sheet top cover for sunken boxes flush to surface for one light point/fan point, controlled by one switch and /or fan regulator including PVC insulated unsheathed 1.5 Sqmm copper conductor cable FR-LSH connected to common earth dolly complete all as specified and directed

All as per srl item No. 10.00 (here-in-before) but One 3 pin socket outlet 6 amp on the independent board point complete all as specified and directed

All as per srl item No. 10.00 (here-in-before) but One bell point controlled by one bell push on independent board complete all as specified and directed.

All as per srl item No. 10.00 (here-in-before) but One light point controlled by two way switch complete all as specified and directed

All as per srl item No. 10.00 (here-in-before) but for 15/16 Amp socket out let by using 2.5 Sqmm PVC insulated unsheathed copper conductor cable FR-LSH multi strand on independent board including provn of 4.0 Sqmm unsheathed, multi stranded copper conductor cable FR-LSH continues as earth wire connected to earth dolly etc complete all as specified and directed

S & F in repairs Modular switch 1 way 6A/10A 1 module single pole complete all as specified and directed.

S & F in repairs Modular switch 1 way 16A, 1 module single pole complete all as specified and directed.

S & F in repairs Modular Socket oultet 6A - 2/3 pin combined 2 module, 230 volt, multipurpose, complete all as specified.

S & F in repairs of Modular Socket outlet 6A/16A - 2/3 pin combined 2 module, 230 volt,multipurpose, complete all as specified.

S & F in repairs Modular Bell push 1 way 6A, 1 module single pole complete all as specified and directed.

S & F in repairs Modular switch 2 way 6A, 1 module single pole complete all as specified and directed.

S & F in repairs of modular Fan step regulator, 120W - 2 module with 5 steps type complete all as specified.

S&F in repair Switch piano, flush type single pole, one way 6 Amp complete all as specified and directed

S&F in repairs Switch piano, flush type single pole, one way 16 Amp complete all as specified and directed

S&F in repairs Switch piano, flush type single pole, two way 6 Amp complete all as specified and directed

S&F in repairs piono flush type bell push 5/6 Amps 230 V AC complete all as specified and directed

S&F in repairs Socket outlet 3 pin, 6A, flush type complete all as specified and directed

S&F in repairs Socket outlet 2 in 1, 3 pin, 6 and 16 Amp flush type complete all as specified and directed

S&F in repairs stepped type electronic fan regulator flush rotary 5 step type complete all as specified and directed

S & F in repairs of buzzer, Ding Dong type AC 230 volts complete all as specified and directed.

S & F in repairs ceiling rose surface bake lite with 3 terminals complete all as specified and directed.

S&F in repair Lamp holder PVC/polycarbonate type with back plate complete all as specified

Taking down old complete and supply and fixing of SPN enclosure with a two pin and earth plug and socket complete with and including MCB, SP, AC, 240 volt of 20 Amp, 'C' curve 10 KA breaking capacity and flush to wall including all cuttings & chases etc in wall and making good to the disturbed surfaces to match the existing complete all as specified & directed.

S&F in repair Switch flame proof rotary type with termination box in LM6, 16A, single pole 250V complete all as specified and directed

Taking down old and supply and fixing of LED light fitting 2x16/2x20 watt flame proof, CMRI certified recommended for gas/vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminium housing with heat resistant toughened glass with LED tube light fixtures driver, holders, connector etc. complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size complete all as specified and directed

Taking down old and supply and fixing of flame proof LED Cool white sunflower type fitting of 20 W, CMRI certfied IP 66 protection of cast aluminium alloy material and heat and impact resistant toughened A clear glass having anti corrossive epoxy powder coated finish complete with all accessories pre wired and including connecting up with three core flexible copper conductor cable with suitable size complete all as specified and directed

Taking down old complete and Supply and fixing of Inverter LED tube light fittings 1200 mm, 20 W ,6500K higher energy saving decorative ultra slim square profile LED lighting fixture with extruded aluminium housing ,enviromental friendly, energy efficient ready to use pack and comprising of batten with all accessories internally prewired and connecting up with twin core twisted copper conductor cable complete all as specified and directed.

Taking down old complete and Supply and fixing of LED tube light fittings 600 mm,10/12W, 6500K higher energy saving decorative ultra slim square profile LED lighting fixture with extruded aluminium housing enviromental friendly, energy efficient ready to use pack and comprising of batten with all accessories internally prewired and connecting up with twin core twisted copper conductor cable complete all as specified and directed.

Taking down old complete and Supply and fixing of 9 watt LED Bulb suitable for B-22 type holder complete all as specified and directed by Engineer-in-charge.

Taking down old unserviseable of any type complete and Supply and fixing of Building Security light LED type of capacity 25 W comprising with Pressure die cast aluminium housing IP 66 protection with all accessories internally prewired and including connecting up with twin core twisted copper conductor cable of suitable size including bracket made of 40mm dia GI light grade pipe of 1.2m long bent to shape fixed with suitable MS clamps, bolts, nuts and washers duly painted complete all as specified and as directed by the Engineer-in-Charge.

Taking down old unserviseable of any type complete and supply and fixing of Slim surface mounting LED panel light 12 W ,3000K/6500K , Square shape with premium diffuser to ensure glare free complete including electrical connection with PVC three core copper flexible wire & all necessary fixing accessories complete all as specified and directed

Taking down old complete and Material and labour sub main wiring with 06 Sq mm nominal cross sectional area, two single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable with and including continuous earth wire of size 06 Sq mm nominal cross sectional area, single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 25 mm dia, medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall and making good to the disturbed surfaces to matched and finised with existing surface are included in the ratecomplete all as specified and directed. Note:- (i) 2 run of 6.0 Sqmm main cable, one run of 6.0 Sqmm earth wire and one run length of PVC conduit of size 25mm shall be considered as one running length. (ii) The wiring shall be done in proper color coding using Red,Yellow, Blue for phases, Black for neutral and Green for earth.

Taking down old complete and Material and labour sub main wiring with 10 Sq mm nominal cross sectional area, two single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable with and including continuous earth wire of size 10 Sq mm nominal cross sectional area, single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 25 mm dia, medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall and making good to the disturbed surfaces to matched and finised with existing surface are included in the rate complete all as specified and directed. Note:- (i) 2 run of 10.0 Sqmm main cable, one run of 10.0 Sqmm earth wire and one run length of PVC conduit of size 25mm shall be considered as one running length. (ii) The wiring shall be done in proper color coding using Red,Yellow, Blue for phases, Black for neutral and Green for earth. .

Taking down old complete and supply and fixing of sheet metal enclosure distribution board, double door, single pole and neutral, AC, 240 volt, 12 way, with 200 Amp rated copper bus bar and metal door with IP - 43 & IK 09 protection along with cable end box for above DB and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete all as specified & directed.

Taking down old complete and supply and fixing of sheet metal enclosure distribution board, double door, single pole and neutral, AC, 240 volt, 08 way, with 200 Amp rated copper bus bar and metal door with IP - 43 & IK 09 protection along with cable end box for above DB and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete all as specified & directed.

Taking down old complete and Supply and fixing of Vertical TPN MCCB DB 04 Way and provision MCCB as incomer,,double door, AC, 440 volt, with 200 Amp rated copper bus bar , sheet metal enclosure completer with IP 54 & IK 09 protection along with cable end box for above DB and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete all as specified and as directed .

Taking down old complete and supply and fixing of SP MCB 6-32 Amp ,240Volt 10 KA ‘C’ series complete all as specified and directed.

Taking down old complete and supply and fixing of SPN MCB 40-63 Amp ,240Volt 10 KA ‘C’ series complete all as specified and directed.

Taking down old complete and supply and fixing of DP MCB 40 Amp ,240Volt 10 KA ‘C’ series complete all as specified and directed.

Taking down old complete and supply and fixing of TPN MCB 25-63 Amp ,415 Volt 16 KA ‘C’ series complete all as specified and directed.

Taking down old complete and supply and fixing of MCCB 4 Pole, 125 Amps, 50 Hz, 25KA, 415 Volts,adjustable thermal and fixed magnetic type with all necessary aluminium lugs and glands, etc complete all as spicified and directed.

Taking down old complete and supply and fixing of MCCB 4 Pole, 160 Amps, 50 Hz, 35/36KA, 415 Volts, adjustable thermal and fixed magnetic type with all necessary aluminium lugs and glands, etc complete all as spicified and directed.

Taking down old complete and M&L labour for earthing complete with galvanised mild steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried vertically in ground (earth pit not less than 2.25 metre deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level steel earth plate connected with GI wire 04 mm dia by means of lug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15 mm bore light grade all as shown in elect plate No 3 on serial page No 497 of SSR part I - 2009 and connecting to main switch board / Main DB’s including excavation, earth work, salt and charcoal dust mixed and packed 150 mm thick around GI earth plate, GI pipe medium grade 20 mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover 40 mm thick in PCC 1:2:4 type B1 duly reinforced with MS Bars 6 mm dia at the rate of 75 mm centre to centre both way with 12 mm dia lifting handle and pit / chamber in PCC 1:3:6 type C1, Angle iron 40 mm x 40 mm x 3 mm frame for pit cover including testing on completion complete all as specified and directed.

NOTE :- DAY TO DAY COMPLAINTS (From Item No 53.00 to 58.00):- Complaints regarding repair/replacement to these items to be attended unconditionally. All in cost incurred upon deemed to be included in respective items

Supply and fixing in replacement of Switch piano, flush type single pole, one way 6 Amp complete all as specified and directed

Supply and fixing in replacement of Switch piano, flush type single pole, one way 16 Amp complete all as specified and directed

Supply and fixing in replacement of Switch piano, flush type single pole, two way 6 Amp complete all as specified and directed

Supply and fixing in replacement of piono flush type bell push 5/6 Amps 230 V AC complete all as specified and directed

Supply and fixing in replacement of Socket outlet 3 pin, 6A, flush type complete all as specified and directed

Supply and fixing in replacement of Socket outlet 2 in 1, 3 pin, 6 and 16 Amp flush type complete all as specified and directed

Supply and fixing in replacement of stepped type electronic fan regulator flush rotary 5 step type complete all as specified and directed

Supply and fixing in replacement of buzzer, Ding Dong type AC 230 volts complete all as specified and directed.

Supply and fixing in replacement of ceiling rose surface bake lite with 3 terminals complete all as specified and directed.

Supply and fixing in replacement of Lamp holder PVC/polycarbonate type with back plate complete all as specified

Supply and fixing of 12 watt Inverter LED Bulb 6500K Lumen efficacay not less than 90Lm/Watt suitable for B-22 type holder complete incl taking down old unserviceable bulb complete all as specified and directed.

Supply and fixing of 7 watt LED Bulb 6500K Lumen efficacay not less than 90Lm/Watt suitable for B-22 type holder complete incl taking down old unserviceable bulb complete all as specified and directed.

Supply and fixing of 5 watt LED Bulb 6500K Lumen efficacay not less than 90Lm/Watt suitable for B-22 type holder complete incl taking down old unserviceable bulb complete all as specified and directed.

Supply and fixing in replacement of wall mounted extruded Aluminium/polycarbonate LED batten fixture T8(G13 holder) 1.2 m, compatible for existing T8 retrofit tube complete including making connection complete all as specified and directed.

Supply and fixing in replacement of LED tubelight 20(±10%) watt, 1.2 m T8 6500K,efficacy not less than 90 lumen/watt, extruded Aluminium/polycarbonate, PC diffusor and inbuilt driver, compatible for existing batten fixture complete all as specified and directed.

Supply and fixing in replacement of LED street light fitting 35 Watt 230V AC outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver, lamp bracket with impact and corrossion resistant complete with IP 65/66 protection including fixing with GI/MS bracket made out of suitable size of light grade tube upto 1.2 mtr length bent to shape with 02 sets of MS clamps made out of minimum 3 mm MS flat iron with suitable bolt and nuts complete with making connection complete allas specified and directed

Supply and fixing in replacement of 4 feet long LED tube light fittings, 20 Watt of cool white / warm comprising of batten with all accessories internally prewired and connecting up with twin core twisted copper conductor cable of suitable size including taking down old fittings complete all as specified and as directed by the Engineer-in-Charge.

Supply and fixing in replacement of LED flood light fitting sqaure shape 150 Watt 230V AC outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver, lamp, bracket with impact and corrossion resistant complete with IP 65/66 protection with suitable bolt and nuts, fixing at any height upto 15m complete with making connection complete all as specified and directed

Supply and fixing in replacement of LED flood light 200 Watt 230V AC outdoor type with thermal management in multiple optics and equipped with IP 66 protection, made of high pressure die cast aluminium hosing and heat resistant complete with driver, lamp bracket with impact and corrossion resistant complete with suitable bolt and nuts complete with making connection complete all as specified and directed

Supply and fixing in replacement of LED downlighter/spot light fitting, recessed mounted, round shaped of ceiling cut outφ160mm, 12watts efficacy not less than 90 lumen/watt, 6500K extruded Aluminium/polycarbonate, PC diffusor, module and inbuilt driver complete including making connection complete all as specified and directed.

Supply and fixing in replacement of LED landscape/bollard light fitting, round shaped of 0.6m pole size, 8/10watts, efficacy not less than 90 lumen/watt, extruded Aluminium/polycarbonate, IP65, PC diffusor, module and inbuilt driver complete including making connection & fixing of pole base with nut and bolt to PCC pedestal/coping complete all as specified and directed.

Supply and fixing in replacement of LED panel light fitting, recessed mounted, square shaped of size 2'x2' area, 36(±10%)watts efficacy not less than 90 lumen/watt, extruded Aluminium/polycarbonate, PC diffusor, module and inbuilt driver complete including making connection complete all as specified and directed.

Supply and fixing in replacement of post top lantern LED type 20 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistance complete with driver and lamp complete all as specified and directed

Supplying and fixing in replacement 1100volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular of size 10.0 sqmm complete all as specified and directed.

Supplying and fixing in replacement 1100volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular of size 6.0 sqmm complete all as specified and as directed.

supply and fixing in replacement of single pole MCB 6-32 Amp ,240Volt 10 KA ‘B’ series complete all as specified and directed.

supply and fixing in replacement of single pole and neutral MCB 40-63 Amp ,240Volt 10 KA ‘C’ series complete all as specified and directed.

supply and fixing in replacement of Triple Pole MCB 25-63 Amp ,415 Volt 10KA ‘C’ series complete all as specified and directed.

supply and fixing in replacement of Triple Pole MCCB 100 Amp ,415 Volt 10KA ‘C’ series complete all as specified and directed.

Supply and replacement of sub main wiring with two single core PVC copper conductor unsheathed wire multi stranded 4.0 sqmm along with earth wire 4.0 sqmm copper conductor single core wire connected by common earth in existing surface/recessed PVC/steel conduit complete all as specified and directed. (Note :- 03 runs of 4.0 sqmm cable will be measured as one running length)

Supply and replacement of sub main wiring with two single core PVC copper conductor unsheathed wire multi stranded 6.0 sqmm along with earth wire 6.0 sqmm copper conductor single core wire connected by common earth in existing surface/recessed PVC/steel conduit complete all as specified and directed. (Note :- 03 runs of 6.0 sqmm cable will be measured as one running length)

Supply and fixing of rigid non-metallic PVC conduit external dia 20mm in size exclusive of boxes(junction/terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc. Complete all as specified

Supply and fixing of casing caping of size 20 mm with necessary fitting complete all as specified and directed.

Supply and fixing of PVC junction boxes(1 to 4 way) complete all as specified and directed.

Supply and fixing of Hylam sheet cover 3mm thick of size 5"x5" complete with machine screw/ washer with provision of witches, sockets, fan regulators etc complete all as specified

Supply and fixing of Hylam sheet cover 3mm thick of size 8"x5" complete with machine screw/ washer with provision of witches, sockets, fan regulators etc complete all as specified

Supply and fixing of Hylam sheet cover 3mm thick of size 11"x8" complete with machine screw/ washer with provision of witches, sockets, fan regulators etc complete all as specified

S&F in repair MS Sunken box of size 4"x4" with approved depth & thickness complete with earth dolly including making good the disturb surfaces CM (1:3) to match the existing complete all as specified

S&F in repair MS Sunken box of size 7"x4" with approved depth & thickness complete with earth dolly including making good the disturb surfaces CM (1:3) to match the existing complete all as specified

S&F in repair MS Sunken box of size 10"x7" with approved depth & thickness complete with earth dolly including making good the disturb surfaces with CM (1:3) to match the existing complete all as specified.

supply and fixing in replacement of sheet metal enclosure distribution board, double door, single pole and neutral, AC, 240 volt, 06 way, with 200 Amp rated copper bus bar and metal door with IP - 43 & IK 09 protection along with cable end box for above DB and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete all as specified & directed.

Note:- Net contract sum shall be calculated after deduction of Sch of credit.

Aman Enterprises

M/S SODHI ASSOCIATES

Mohinder Pal and Sons

M/s NIRMAN BUILDERS

M/s Kataria Construction Company