Loading
Loading…
Loading…
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹3.2 L
EMD Value
₹6,500
Closing Date
5 Nov 2026, 1:00 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Executive Engineer (JAI HIND JAL PRAKALPA)
Office of the Executive Engineer (JAI HIND JAL PRAKALPA), Kolkata Municipal Corporation Kolkata -700105
SUPPLY AND LAYING OF 250 MM DIA. MS PIPE LINE WITH SLUICE VALVE FROM SECONDARY SLUDGE COLLECTION CHAMBER OF CLARIFIER UNIT 2 UPTO TO FILTER BED WASTE WATER CHANNEL AT JAI HIND JAL PRAKALPA.
2026_KMC_1046305_1
KMC/WS/JHJP/06/2026-2027
Open Tender
MECHANICAL
Percentage
14 days
JAI HIND JAL PRAKALPA
Please refer Tender documents.
4 documents required · 4 mandatory
₹0
₹6,500
14 Oct 2026
14 Oct 2026
7 Nov 2026
14 Oct 2026
5 Nov 2026
14 Oct 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Clearing compound premises of shurbs, plants, jungles etc. by cutting and removing as
directed (Specific permission of Engineer-in-Charge prior to execution will be necessary). (Payment to be made on area cleared) | 50 | SQUARE METER | 11 | ₹550 |
| 2 | Sypply of E.R.W.M.S. (Electrical Resistant Welded M.S.) black pipe of ISI mark as per relevent IS Specification ( heavy quality ) having wall thick-ness not less than 8 mm. [N.B.: The rates for supply of TATA Make pipe will be arrived at by adding 20% of the corresponding rates] Diameter in mm (Internal) 250 | 30 | METER | 2,264 | ₹67,920 |
| 3 | Sypply of E.R.W.M.S. (Electrical Resistant Welded M.S.) black pipe of ISI Mark as per relevent IS Specification ( heavy quality ) having wall thickness not less than 5 mm. [N.B.: The rates for supply of TATA Make pipe will be arrived at by adding 20% of the
corresponding rates ] Diameter in mm (Internal)100 | 0.6 | METER | 871 | ₹522.6 |
| 4 | Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches,levelling, dressing and ramming the bottom, bailing out water as
required complete. (a) Depth of excavation not exceeding 1,500 mm. | 0.15 | CUBIC METER PERCENT | 11,927 | ₹1,789.05 |
| 5 | Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150 mm. including watering and ramming etc. layer by layer complete. (Payment to be made based on the basis of measurement of finished quantity of work.(a) With earth obtained from excavation of foundation | 0.14 | CUBIC METER PERCENT | 7,754 | ₹1,067.93 |
| 6 | Ductile iron double flanged manually operated sluice valve generally conforming to IS : 14846, having body, door, dome, gland in graded ductile iron to IS 1865, four faces and spindle nut of gun metal to IS : 318, inside screw non- rising stainless steel AISI-410 spindle valves suitable formaximum working pressure of 10 kg/cm... and body tested 15
kg/cm..., flanges flat faced and drilled to IS: 1538 :1993. Valves tested by closed end method only. 350mm and above valves are complete with enclosed gear box with anti friction device.Diameter in mm 250 | 2 | EACH | 41,895 | ₹83,790 |
| 7 | Ductile iron double flanged manually operated sluice valve generally conforming to IS : 14846, having body, door, dome, gland in graded ductile iron to IS 1865, four faces and spindle nut of gun metal to IS : 318, inside screw non- rising stainless steel AISI-410 spindle valves suitable formaximum working pressure of 10 kg/cm... and body tested 15
kg/cm..., flanges flat faced and drilled to IS: 1538 :1993. Valves tested by closed end method only. 350mm and above valves are complete with enclosed gear box with anti friction device.Diameter in mm 100 | 1 | EACH | 10,794 | ₹10,794 |
| 8 | Supply of M.S. Flange (slipper type) as per IS-6392 TABLE 17 Thickness - 20mm -22mm NB Diameter in mm 250 | 4 | EACH | 2,078 | ₹8,312 |
| 9 | Supply of M.S. Flange (slipper type) as per IS-6392 TABLE 17 Thickness - 20mm -22mm NB Diameter in mm 100 | 2 | EACH | 635 | ₹1,270 |
| 10 | Lowering, fitting and fixing of all types of valves in proper position and alignment using chain pully block or crane(for diameter above 250 mm) by providing temporary support,as required,gaskets,nuts& bolts etc.all cornplete as per specification and direction of the Engineer-in-Charge.[The rate Includes cost of flange joints]250mm dia. | 2 | EACH | 2,627 | ₹5,254 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.50 MB
T.pdf
Tender Documents • 0.25 MB
BOQ_2563948.xls
BOQ • 0.34 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .