Renovation to the EB Control Room and Ticket Room at Sithannavasal Muthamil Poonga in Sithannavasal Panchayat.

Amount

Renovation to the EB Control Room and Ticket Room at Sithannavasal Muthamil Poonga in Sithannavasal Panchayat.

Clean removal of cement plaster from walls

Plastering with cement mortar 1:5 mix to 12mm thick includingincluding cost and conveyance of all materials to site and all labour charges for mixing, laying, curing etc complete

Paving the Top of roof with Solar reflective ceramic tiles of size 305 x 305 x 7mm thick of approved quality and colour laid in Cement mortar 1:3 (One cement and three M.Sand) 12mm thick and pointed with tile grout (Nitotile Grout or equivalent) and cement in the ratio of 1:3 for joint, curing etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by the Executive Engineer before use on works)

Distembering with Oil Bound distemper in two coats with wall priming coat and Shade & quality as directed by the departmental engineer in charge.

Painting with Exterior Emulsion in two coats with wall priming coat and Shade & quality as directed by the departmental engineer in charge including cost and conveyance of all materials and labour charges etc., complete

Painting two coats with best ready mixed paint for Old Steel work including cost & Conveyance etc., complete.

Supply and fixing of single box type 4'-40W flourescent tube fitting with copper choke and condenser with TW round block on wall or ceiling with flourescent tube with PVC unsheathed copper leads from terminals to the fitting of Tube Light [SD 83 ]

Supply andf ixing of 1200mm (48") AC ceiling fan complete with stepped electronic 300Wr egulator with 1meter down rod on the existing clamp

Supply and fixing of Steel window includoing all cost and conveyance etc

Providing UPVC (Un-Plasticized Polyvinyl Chloride) Door: Providing and fixing casement doors fabricated from un-plasticized polyvinyl chloride (uPVC) sections. Profiles: The profiles should be three chamber system which provides high insulation properties with outer frame 60mm x 55mm with an outer wall thickness of 2.4mm. The window unit should be designed with all corner joints mitred and fusion welded. Windows should be steel reinforced with 25 x 24 x 25mm steel reinforcement with a thickness of 1mm to have dimensional stability. The sash should be of 60 x 102mm. The mullion should be of 60 x 74mm. The profiles should have co-extruded seals. Hardware: All the hardware like friction stays, handles should be screwed with self tapping screws. The handles, locks should be designed so that they cannot be released from outside. Glazing: The window system should be glazed with 5mm plain float glass / 6mm bison lam Installation: The profiles should be cut to length and welded 45 degrees. The window should be designed such that the water drainage does not pass through the reinforcement chamber. The window system should be fixed directly to the plastered brick wall using self expanding nylon plug and driving ms electroplated screws into plug.

GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}

VeeraPandiyan V (BID ID -1555733)