Supply installation testing and commissioning of Fire Hydrant system For Guest House IISER Pune

Bidder Please note that, quoted rate are inclusive of tranportation, labour, royalties taxes etc. except GST. GST will be paid as Govt of India, rules and regulation. Present GST rate is 18%. Please refer special condition of Contract given in tender documents.

Supplying, installation, testing and commissioning of electric driven terrace pump suitable for automatic operation and consisting of following, complete in all respects, as required: a) Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical confirming to IS : 1520 b) Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase, 50 Hz, AC supply with IP55 class of protection for enclosure,horiziontal foot mounted type with Class-'F' insulation,conforming to IS-325. c) M.S.fabricated common base plate, coupling, coupling guard, foundation bolts etc.as required. d) Suitable cement concrete foundation duly plaster edand with anti vibration pads 900 lpm at 35 m Head

Fabrication, Supplying, Installation, testing & commissioning of outdoor type Fire Terrace Booster electrical control panel of cubical construction of double door type, floor /wall mounted type fabricated with 2 mm thick CRCA sheet, compartmentalized with hinged lockable doors, dust and vermin proof, Powder coated of approved shade ,cable alley, busbar, inter connection having following switchgears and accessories mounting and internal wiring, earth terminals, numbering, lettering etc complete in all respect suitble for operation on 415 Volts,3 Phase 50 Hz AC supply etc as required. a) 1 No. 100 Amps 4 Pole MCCB, 16 KA. b) Digital voltmeter, Amperemeter with selector switch, indicating lamps (LED type) with toggle switch etc. c) Suitable HP fully automatic star delta starter for operating 900 lpm pump with over load protection, current sensing type single phase preventer complete with all accessories and internal wiring required for auto/ manual control with indication-2 Nos. d) 2 Nos. 63 Amp. 4 pole MCB, 16 KA

Providing laying, testing & commissioning of ’C' class heavy duty MS Pipe conforming to IS 1239/3589 i/c fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. in ground including welding, excavation & providing cement concrete blocks as supports, anticorrosive treatment with coaltar/asphalt tape as per IS 10221, refilling the trench etc. of following sizes complete as required. 200 mm. dia (wall thickness = 6.3 mm)

Providing laying, testing & commissioning of ’C' class heavy duty MS Pipe conforming to IS 1239/3589 i/c fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. in ground including welding, excavation & providing cement concrete blocks as supports, anticorrosive treatment with coaltar/asphalt tape as per IS 10221, refilling the trench etc. of following sizes complete as required. 150 mm. Dia

Providing, laying, testing & commissioning of ’C' class heavy duty MS pipe conforming to IS 3589 / IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc and fixing the pipe on the wall / ceiling with suitable clamp / support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :25 mm dia

Providing, laying, testing & commissioning of ’C' class heavy duty MS pipe conforming to IS 3589 / IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc and fixing the pipe on the wall / ceiling with suitable clamp / support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :50 mm dia

Providing, laying, testing & commissioning of ’C' class heavy duty MS pipe conforming to IS 3589 / IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc and fixing the pipe on the wall / ceiling with suitable clamp / support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :65 mm dia

Providing, laying, testing & commissioning of ’C' class heavy duty MS pipe conforming to IS 3589 / IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc and fixing the pipe on the wall / ceiling with suitable clamp / support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :80 mm dia

Providing, laying, testing & commissioning of ’C' class heavy duty MS pipe conforming to IS 3589 / IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc and fixing the pipe on the wall / ceiling with suitable clamp / support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :100 mm dia