Renovation / Repairing and replacement of EI and Fans Fittings and misc work

Wiring for light / power plug with 2X4 sq. mm FR PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit along with 1 No 4 sq. mm FR PVC insulated copper conductor single core cable for loop earthing as required.

Wiring for light/ power plug with 4X4 sq. mm FR PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit along with 2 Nos 4 sq. mm FR PVC insulated copper conductor single core cable for loop earthing as required.

2 x 1.5 sq. mm

3 x 1.5 sq. mm

4 x 1.5 sq. mm

5 x 1.5 sq. mm

6 x 1.5 sq. mm

2 X 6 sq. mm

Supplying and Fixing of following size / modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required

4 Module (125 mmx75mm)

8 Module (125 mmx125mm)

5/6 amps switch

15/16 amp switch

3 pin 5/6 amp socket outlet

6 pin 15/16 amp socket outlet

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Single pole

Triple pole and neutral

Supplying and fixing musical / Ding Dong call bell suitable for D.C./A.C. single phase, 230 volts, complete as required.

Supplying and fixing Two Module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required.

12 Ways (4+24 ) Double Door

8 Way SPN Double Door

Supplying and fixing DP sheet steel enclosure on surface/ recess along with 25/32amps 240 volts "C" curve SPN MCB complete with connections, testing and commissioning etc. as required.

Replacement of following existing faulty / energy guzzler fan / fittings / fixtures in Inspection quarter at Charinmli, Bhopal: -

Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required. Note: dismentalling of old fan etc., if available is also in the scope.

Supply, Installation, Testing and Commissioning of 4 feet, 20 Watts (+/- 2 Watts) energy efficient linear box LED batten light having 6500K colour temp., minimum 1900 Lumens, 95 Lumen/watt efficacy and 0.9 power factor along with all accessories suitable for operation on 230 Volts, 50 Hz Single Phase AC Supply including dismentalling of old unserviceable fitting etc. complete as required.

SITC of 300 mm sweep fresh air fan With metallic body and net / bird guard i/c connection with 2x1.5 sqmm cu. Conductor FR PVC cable etc as reqd at site. (M/s Havells Ventilair-DS / Philips or Equivalent model of Usha, Bajaj, Khaitan or other similar superior make ).

Replacement of Decorative wall light, gold finish fixture with white glass diffuser including dismentalling of old fixture and fixing the same with new one suitable for 7.5 W LED filament lamp E27 base. (GOBLETO WL 1LS E27 GLD" Havells make or similar superior Make atleast equvalent to this model)

SITC of Decorative wall light fixture made up of Polycarbonate, suitable for 9 W retrofit LED lamp B22 base Upto 1 N x 9 W LED Lamp including connection etc. complete as required. (CITY 1 / 2 NEW POLY IND. Havells make or similar superior Make atleast equvalent to this model)

SITC of Downlight Highlighter indoor / outdoor Decoration Lamp LED wall light Light Waterproof Wall Lamp, Warm white (Aluminium)

Supplying & Fixing of 400 mm wall mounted fan, 100% copper wound, metallic blade including Hanging the same with nuts & bolts on wall and making connection with the help of 2x.5 Sqmm wire etc. complete as required.

Supplying & Fixing of post top lantern fitting suitable for 230 volt 50 Hz Ac supply Reliable and aesthetically designed IP65 post top lantern with symmetric light distribution. BGP200 LED26 CW PSU GR CPC SPD and suitable size mounting arrangement at pillar including connection with 2x1.5 Sqmm wire etc. complete as required. (Philips make or similar superior Make atleast equvalent to this model)

Supply,Installation, Testing and Commissioning of Maintenance free Chemical earth station as per latest RDSO/BSNL specifications consisting of:- (a) Copper bonded steel Electrode of 3.0 Mtrs. long 17 mm. dia. with copper bonded thickness of minimum 250 microns and UL listed and marked→01 No. (b) Earth enhancing compound minimum 30-35 Kg. of RDSO/BSNL approved brandsuplied in sealed bags of minimum 10 Kg. (Make:- RDSO/BSNL approved). (c) Providing & weld ( Exothermic) a Copper bus bar of minimum size 6mmx25mmx150mm on top of earth electrode. (d) Providing & making inspection chamber (DMC) pit cover of minimum size of 425mmx250mm etc complete as required.

Supplying and laying 35 sqmm. copper conductor flexible multistrand unarmoured pvc insulated and PVC sheathed copper cable on surface/air i/c suitable size of lugs , nut bolt etc. for earth connections etc. complete as reqd.

Providing & Fixing Copper Main Equi-potential earth busbar (MEEB) of minimum size 6mmx25mmx300mm fixing on wall with two no. suitable insulator i/c suitable size nut bolt, spring waser and marking & sign writing as per the direction of Engineer-in-charge etc complete as required at site.

Supplying and laying of following sizes XLPE insulated PVC inner sheathed Copper/Aluminium conductor Armoured /un-Armoured cable of 650/1100V grade conforming to IS: 7098(Part 1) 1988 with upto date amendments, including laying in the existing RCC/ HUME/ METAL pipe or fixing on wall surface with suitable clamps or in the existing masonry open duct etc. as required.

2 x 6 Sqmm Aluminium conductor armoured cable

3½ X 35 sqmm Aluminium Conductor armoured Cable

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.

2 X 6 sq. mm (19mm)

3½ X 35 sq. mm (32mm)

SITC of 25 Litre Vertical, 5 Star Rated Storage Water Heater (Geyser) with all accssories complete with connection, testing etc as required.(Bajaj, Havells, Crompton, Racold or any renowned make)

SITC of 45 Watt, LED street light luminaire in a single piece, powder coated, pressure die cast aluminium housing with high efficient LED with minimum luminous efficacy 100 Lm/w and as lighting source , thermal shock and High impact resistance toughned Glass cover in front, IP66 Protection and impact resistance of IK08, pole mountable , maintenance free , duly wired complete with associated accessories ,LED driver and suitable for operation on 230 volts, 50 Hz AC supply i/c connections etc. as reqd. (M/S Havells / crompton/ Bajaj or equivalent similar superior make)

Providing and fixing one no, 530 x 450 x 175 mm (nominal inner dimensions /size) all weather, Poly carbonate , SMC Meter Box, with IP54 protection, side hinged openable door and suitable for outdoor installation complete with DIN rail, & pole clamps , fixing the same on the existing pole/wall making interconnection etc. complete as required. (with out MCB )

Providing and fixing one no, 250x200x100mm (nominal inner dimensions /size) all weather, Poly carbonate , SMC junction Box, with IP54 protection, side hinged openable door and suitable for outdoor installation complete with DIN rail, & pole clamps , fixing the same on the existing pole/wall making interconnection etc. complete as required. (with out MCB )

Supplying and fixing of G.I bracket for mounting of LED street light fitting on wall fabricated out of 40mm dia G.I pipe (medium class) of 1.2 Meter length having suitable machine made curve with suitable size of reducers/ 40mmx3mm flat iron clamp and shall be painted with two coats of red oxide and two coats of aluminium paint including numbering complete as required.

Supplying and laying 3X2.5 sqmm copper conductor round flexible multistrand unarmoured pvc insulated and PVC sheathed copper cable in air for electrical connection of the existing street light fitting etc.as reqd. cable.

Supplying & Fixing of the frame for exhaust fan suitable up to 450 mm for bird protection with the help of 25mmx3mm MS flat frame at outer side and with 1"x1" square MS wire mesh of 18 SWG wire in the frame, painting the same and fixing the with the help of screws, gittis etc. complete as required.