Providing and Supplying Modular Furniture for Newly Constructed Government School Building at Kachigam, Nani Daman.

Civil works others

(Junior Class Room 2 S (Junior Class Room 2 Seater Sitting) 1000X900X750 Desk-Top Panel-All panels are made from 18mm thk Pre-laminated twin board (E1/P2 GRADE) with PVC edge banding on all sides.The panels have cornersrounded for safety usage. Desk-Top Panel-All panels are made from 18mm thk Pre-laminated Compact Laminated Board with Decorative Paper on both sides (AS PER IS 2046: 1995) The Panels have corners rounded for safety usage . Understructure - All side metal frames and cross connectors are made from combination of 25.4 x1.2 mm thk(approx. 18 SWG) Round ERW tubes ,31.8 x 1.2 mm thk(approx. 18 SWG) Round ERW tubes and 28.6 x 1.2 mm thk(approx. 18 SWG) Round ERW tubes(As per IS:7138) which are welded together.The Welded structures and cross connectors are coated with min. 45 micron thickness of epoxy polyester coating.Back supports which are provided at the rear back are made of 50.8 x 25.4 x 1.2 mm thk(approx. 18 SWG) rectangular ERW tubes(As per IS:7138).The tubes are coated with min. 45 micron thickness of epoxy polyester coating.The storage shelves are made from 0.6 mm thk MS sheet(As per IS:513) fixed below the radesk top panel and are coated with min. 45 micron thickness of epoxy polyester coating. Hooks are provided on the vertical side frames on both sides of the desk for hanging bags/bottles. They are made from 2 mm thk MS sheet(As per IS:513) and are coated with min. 45 micron thickness of epoxy polyester coating.The understructure is assembled using M6 trilobular screws(As per DIN 7500)with Zn blue plating.Compact Laminate seat and back panels are assembled using M6 Counter sunk Trilobular screws(as per DIN 7500) with Zn Black Plating (As per IS 1573:1986)Spacers Are provided on th top of round tubes for wooden panels fixing. They are made of made Glass filled (30%)Plastic Caps made of PP copolymer(3530 Grade) are also provided on the rear frames adding more aestheic value to the product.M6 high tensile TVS make bolt(Class 8.8) with glasss filled nylon level adjustors are provided at the bottom of understructure to take care of unevenness in floor with height adjustment of approx 15mm. Furniture Make :- Godrej Interio or equivalent complete as directed by engineer incharge.

(Junior Class Room 3 Seater Sitting) Providing , Fixing & Placing 1500X900X750 Desk-Top Panel-All panels are made from 18mm thk Pre-laminated twin board (E1/P2 GRADE) with PVC edge banding on all sides.The panels have cornersrounded for safety usage. Desk-Top Panel-All panels are made from 18mm thk Pre-laminated Compact Laminated Board with Decorative Paper on both sides (AS PER IS 2046: 1995) The Panels have corners rounded for safety usage . Understructure - All side metal frames and cross connectors are made from combination of 25.4 x1.2 mm thk(approx. 18 SWG) Round ERW tubes ,31.8 x 1.2 mm thk(approx. 18 SWG) Round ERW tubes and 28.6 x 1.2 mm thk(approx. 18 SWG) Round ERW tubes(As per IS:7138) which are welded together.The Welded structures and cross connectors are coated with min. 45 micron thickness of epoxy polyester coating.Back supports which are provided at the rear back are made of 50.8 x 25.4 x 1.2 mm thk(approx. 18 SWG) rectangular ERW tubes(As per IS:7138).The tubes are coated with min. 45 micron thickness of epoxy polyester coating.The storage shelves are made from 0.6 mm thk MS sheet(As per IS:513) fixed below the radesk top panel and are coated with min. 45 micron thickness of epoxy polyester coating. Hooks are provided on the vertical side frames on both sides of the desk for hanging bags/bottles. They are made from 2 mm thk MS sheet(As per IS:513) and are coated with min. 45 micron thickness of epoxy polyester coating.The understructure is assembled using M6 trilobular screws(As per DIN 7500)with Zn blue plating.Compact Laminate seat and back panels are assembled using M6 Counter sunk Trilobular screws(as per DIN 7500) with Zn Black Plating (As per IS 1573:1986)Spacers Are provided on th top of round tubes for wooden panels fixing. They are made of made Glass filled (30%)Plastic Caps made of PP copolymer(3530 Grade) are also provided on the rear frames adding more aestheic value to the product.M6 high tensile TVS make bolt(Class 8.8) with glasss filled nylon level adjustors are provided at the bottom of understructure to take care of unevenness in floor with height adjustment of approx 15mm. Furniture Make :- Godrej Interio or equivalent complete as directed by engineer incharge.

(Senior Class Room 2 S 1200X900X850 Desk-Top Panel-All panels are made from 18mm thk Pre-laminated twin board (E1/P2 GRADE) with PVC edge banding on all sides.The panels have cornersrounded for safety usage. Desk-Top Panel-All panels are made from 18mm thk Pre-laminated Compact Laminated Board with Decorative Paper on both sides (AS PER IS 2046: 1995) The Panels have corners rounded for safety usage . Understructure - All side metal frames and cross connectors are made from combination of 25.4 x1.2 mm thk(approx. 18 SWG) Round ERW tubes ,31.8 x 1.2 mm thk(approx. 18 SWG) Round ERW tubes and 28.6 x 1.2 mm thk(approx. 18 SWG) Round ERW tubes(As per IS:7138) which are welded together.The Welded structures and cross connectors are coated with min. 45 micron thickness of epoxy polyester coating.Back supports which are provided at the rear back are made of 50.8 x 25.4 x 1.2 mm thk(approx. 18 SWG) rectangular ERW tubes(As per IS:7138).The tubes are coated with min. 45 micron thickness of epoxy polyester coating.The storage shelves are made from 0.6 mm thk MS sheet(As per IS:513) fixed below the radesk top panel and are coated with min. 45 micron thickness of epoxy polyester coating. Hooks are provided on the vertical side frames on both sides of the desk for hanging bags/bottles. They are made from 2 mm thk MS sheet(As per IS:513) and are coated with min. 45 micron thickness of epoxy polyester coating.The understructure is assembled using M6 trilobular screws(As per DIN 7500)with Zn blue plating.Compact Laminate seat and back panels are assembled using M6 Counter sunk Trilobular screws(as per DIN 7500) with Zn Black Plating (As per IS 1573:1986)Spacers Are provided on th top of round tubes for wooden panels fixing. They are made of made Glass filled (30%)Plastic Caps made of PP copolymer(3530 Grade) are also provided on the rear frames adding more aestheic value to the product.M6 high tensile TVS make bolt(Class 8.8) with glasss filled nylon level adjustors are provided at the bottom of understructure to take care of unevenness in floor with height adjustment of approx 15mm. Furniture Make :-Godrej Interio or equivalent complete as directed by engineer incharge.

(Senior Class Room 3 Seater Sitting) Providing , Fixing & Placing 1800X900X850 Desk-Top Panel-All panels are made from 18mm thk Pre-laminated twin board (E1/P2 GRADE) with PVC edge banding on all sides.The panels have cornersrounded for safety usage. Desk-Top Panel-All panels are made from 18mm thk Pre-laminated Compact Laminated Board with Decorative Paper on both sides (AS PER IS 2046: 1995) The Panels have corners rounded for safety usage . Understructure - All side metal frames and cross connectors are made from combination of 25.4 x1.2 mm thk(approx. 18 SWG) Round ERW tubes ,31.8 x 1.2 mm thk(approx. 18 SWG) Round ERW tubes and 28.6 x 1.2 mm thk(approx. 18 SWG) Round ERW tubes(As per IS:7138) which are welded together.The Welded structures and cross connectors are coated with min. 45 micron thickness of epoxy polyester coating.Back supports which are provided at the rear back are made of 50.8 x 25.4 x 1.2 mm thk(approx. 18 SWG) rectangular ERW tubes(As per IS:7138).The tubes are coated with min. 45 micron thickness of epoxy polyester coating.The storage shelves are made from 0.6 mm thk MS sheet(As per IS:513) fixed below the radesk top panel and are coated with min. 45 micron thickness of epoxy polyester coating. Hooks are provided on the vertical side frames on both sides of the desk for hanging bags/bottles. They are made from 2 mm thk MS sheet(As per IS:513) and are coated with min. 45 micron thickness of epoxy polyester coating.The understructure is assembled using M6 trilobular screws(As per DIN 7500)with Zn blue plating.Compact Laminate seat and back panels are assembled using M6 Counter sunk Trilobular screws(as per DIN 7500) with Zn Black Plating (As per IS 1573:1986)Spacers Are provided on th top of round tubes for wooden panels fixing. They are made of made Glass filled (30%)Plastic Caps made of PP copolymer(3530 Grade) are also provided on the rear frames adding more aestheic value to the product.M6 high tensile TVS make bolt(Class 8.8) with glasss filled nylon level adjustors are provided at the bottom of understructure to take care of unevenness in floor with height adjustment of approx 15mm. Furniture Make :-Godrej Interio or equivalent complete as directed by engineer incharge..

(FACULTY TABLE) Providing , Fixing & Placing Enterprise 1200 Table without CPU Hanger size shall be 1200 Width mm x 600 Depth mm x 728 Height mm. Top shall be 18 mm thick Pre laminated particle board all work surface edges shall be having duly sealed with 2 mm thick PVC edgebanding. Understructure Modesty Panel 18 mm thick Pre laminated particle board . The Rectangular frame shall be fabricated component in 1.2 mm thick CRCA , Finish : powder Coat( epoxy polyster) . Leg shall be fabricated component in 38 mm x 25 mm 1.2 mm thick MS ERW ATube ,finish powder coat ( epoxy polyster).The plastic cap for cable travel shall be injection moulded polypropylene and leveler glide for shall be nylon 6 & MS bolt. The storage shall be having shell and drawer tray 0.6 mm thick CRCA Finish powder coat (epoxy polyster) plus the drawer front shall be 0.8 mm thick CRCA Finish powder coat (epoxy polyster) plus lock with 10 lever and handle and leveller. The wire management shall be horizontal wire carrier 0.7 mm thick CRCA Finish powder coat (epoxy polyster) and vertical wire carrier 0.8 mm thick CRCA Finish powder coat (epoxy polyster) . Furniture Make :- Godrej Interio or equivalent complete as directed by engineer incharge.

(FACULTY CHAIR) Providing , Fixing & Placing The seat is made up of 1.4 ± 0.1 cm thick hot - pressed plywood upholstered with fabric and moulded polyurethane foam.SEAT SIZE: 48.0cm (W)x 51.0cm(D).The Back is injection moulded in Glass filled Polypropylene which is upholstered with Mesh fabric.The back consist of fixed lumbar support made of injection moulded Polypropylene having a nominal thickness of 0.4 ±0.02 cm.BACK SIZE: 44.0 cm(W) x 51.5 cm(H).The polyurethane foam for seat is of density = 30 ± 3 kg/m3.The armrest is made of injection moulded Polypropylene which is connecting seat and back .The mechanism is designed with the following features: • 360° revolving type. • Centre - Tilt. • Tilt with upright lock. The pneumatic height adjustment has a stroke of 9.5 ± 0.5cm.The pedestal is injection moulded Polyamide and fitted with 5 nos.twin wheel castors. The pedestal is 60.0 ±0.5 cm P.C.D.The twin wheel castors are injection moulded in black Polyamide having 5.0± 0.1cm wheel Diameter. Furniture Make :- Godrej Interio or equivalent complete as directed by engineer incharge.

(STAFF ROOM CHAIR'S) Providing , Fixing & Placing SEAT ASSEMBLY: The seat should be made up of 1.4 ± 0.1 cm thick hot - moulded polyurethane foam and upholstered with fabric. SEAT SIZE: 48.0cm (W)x 49.0cm(D). BACK ASSEMBLY: The two part assembly upholstered with Mesh fabric should be made up of back outer injection moulded in glass filled Polyamide and back inner injection moulded in glass filled Polypropylene. The back consist of adjustable lumbar support having an adjustment of 4.0 ± 0.5cm. It should be made of injection moulded Polyoxymethylene (POM) which should be upholstered with foam and fabric . BACK SIZE: 47.0 cm(W) x 53.0 cm(H). POLYURETHANE FOAM: The polyurethane foam for seat should be of density = 55 ± 5 kg/m3. 4. TWO-WAY ADJUSTABLE ARMRESTS: It should be made of glass filled Polyamide arm structure with PVC armtop having a height adjustment of 8.0 ±0.5cm. along with to-fro movements. TILT MECHANISM: The mechanism should be designed with the following features: 360° revolving type. • Tilt tension adjustment. • 3 position lock (including upright lock) giving option of variable tilt angle to the chair. PNEUMATIC HEIGHT ADJUSTMENT: The Class-3 pneumatic height adjustment has stroke of 10 ± 0.5cm. PEDESTAL ASSEMBLY: The pedestal should be injection moulded in glass filled Polyamide and fitted with 5 nos. twin wheel castors.The pedestal should be 64.0 ±0.5 cm P.C.D. TWIN WHEEL CASTORS: The twin wheel castors are injection moulded in Polyamide having 6.0± 0.1cm wheel Diameter. Furniture Make :-Godrej Interio or equivalent complete as directed by engineer incharge.

(SOFT BOARD) Soft Board PanelingProviding , Fixing & Placing Soft board paneling to consist of 12mm th Soft on backing of 12mm commrcial plywood with required frame work & teakwood beading patty with approved fabric layingin grove pattern at wall surfaces, Partition edge as per required & suggested Area.(SIZE 1200X2400MM) Furniture Make :- Godrej Interio or equivalent complete as directed by engineer incharge.

(STORE) Providing , Fixing & Placing Storwel plain shall have an overall size of 916mm(W)x486mm(D)x1980mm(H) with welded construction. It should have the shelf thickness of 0.7 mm, Back thickness of 0.8mm, Door thickness of 0.8mm (high yield strength) and all other components shall have a thickness of 0.9mm. These components shall be made of CRCA ‘D’ grade high yield strength as per IS:513. The Storwel Plain should have a Mazak handle and Three way locking mechanism with Shooting Bolts. It should have a height wise adjustable shelf mounting which shall have a Uniformly Distributed Load Capacity of max 40 Kg. It should also have a M10 Screw type Leveller with Hex plastic base. The finishing shall include Epoxy powder coated to the thickness of 50 microns (+/- 10). Plenty of colour options and shelving options shall be available. Furniture Make :-Godrej Interio or equivalent complete as directed by engineer incharge..

Providing and Supplying Fire Extinguisher ABC 6 kg per floor 04 nos. (G+3) Furniture Make :- Godrej Interio or equivalent complete as directed by engineer incharge.

Providing and Supplying CO2 (Fire Extinguisher) in every lab (For Physics, Chemistry, Biology and Computer as Furniture Make :- Godrej Interio or equivalent complete as directed by engineer incharge.