Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹39.8 LAccepted-AOC N 4 NS 4 PLOT NO 6 7 OPP PUNDLIK NAGAR WATER TANK AURANGABAD 431 001 | AURANGABAD | AURANGABAD | MAHARASHTRA | 431001 | ₹39.8 L | L1 | Accepted-AOC L1 |
| 2 | L2₹40.5 LRejected-AOC 3 JAINANDAN NIWAS NEAR MITALI APARTMENT OPP KORUM MALL KHOPAT THANE 400602 | THANE | THANE | MAHARASHTRA | 400602 | ₹40.5 L | L2 | Rejected-AOC L2 |
| 3 | L3₹41.1 LRejected-Finance SAPPHIRE COMPLEX 31 MUMBAI PUNE ROAD DAPODI PUNE 411012 | PUNE | PUNE | MAHARASHTRA | 411012 | ₹41.1 L | L3 | Rejected-Finance L3 |
| Sl No | Description | Qty | Unit | Best Electric Corporation L3 | Tirupati Electricals Sales & Services L1 | Kevla Engineering L2 |
|---|---|---|---|---|---|---|
| 1.00Retrofitting and Upgradation of Pump and Allied equipment's | ||||||
| 1.01 | Dismantling & overhauling of Vertical Turbine pumps from the position having 10 mtrs. suspended length (from Bell Mouth to Discharge Head.), cleaning, checking, aligning, assembling i.e., refitting, commissioning with trial run on no load & full load for at least 30 minutes including replacement of spare parts,fastners (which shall be made available by MIDC at free of cost at site of work) etc. complete as per site requirements. Note : For +/- suspended length beyond 10 m, the rate shall be incerased/decreased at +/- 5% per meter. | 20 | Hourse power | 160 ₹3,200 | 150 ₹3,000 | 160 ₹3,200 |
| 1.02 | Supply of Bowl Assembly of WPIL make having model No:- EM10TC/ 4 Stage, Having Serial No:- VH 50028-30.giving discharge 83.33 cum/hr at bowl point head 36 mtr. | 1 | Set | 18,00,000 ₹18 L | 17,00,000 ₹17 L | 17,50,000 ₹17.5 L |
| 1.03 | Supplying, erecting, testing and commissioning of minimum three & above star rated 3 phase, 415 V, 50 Hz, submersible pump set of 14.92kW/20 HP suitable for erection on open well, pump having delivery head from 60 to 36 m and discharge from 1425 to 825 litres per minute & 80 mm suction/65 mm delivery dia. as per specification no. WP-OSP. | 2 | each | 82,000 ₹1.6 L | 78,000 ₹1.6 L | 80,000 ₹1.6 L |
| 1.04 | Supplying and erecting 100 mm dia. cast iron double flange sluice valve complete with PN16 pressure rating, as per specification no. FF-VL/SV | 2 | each | 9,180 ₹18,360 | 9,000 ₹18,000 | 9,180 ₹18,360 |
| 1.05 | Supplying and erecting 100 mm dia cast iron double flange NRV complete with PN16 pressure rating, as per specification no. FF-VL/NRV | 2 | each | 8,643 ₹17,286 | 8,600 ₹17,200 | 8,643 ₹17,286 |
| 1.06 | Supplying and erecting "B" class G.I. Coupling / Nipple in position with necessary material
PW 3-7) 100 mm dia | 10 | each | 594 ₹5,940 | 590 ₹5,900 | 594 ₹5,940 |
| 1.07 | Providing, fabricating, erecting, M.S. Flanges sleep on type (all tables) of required size and thickness with both side machined.
PW 10-1) Up to 300 NB | 20 | kilogram | 171 ₹3,420 | 170 ₹3,400 | 171 ₹3,420 |
| 1.08 | Supplying and erecting GI pipe 100mm dia ‘C’ class position with accessories complete as per specification no. CW-PLB/GP. | 35 | Meter | 1,466 ₹51,310 | 1,465 ₹51,275 | 1,466 ₹51,310 |
| 1.09 | Designing & Providing of LT Panel Board For 2 x 20 HP Openwell Submersible. | 1 | each | 1,65,000 ₹1.6 L | 1,63,000 ₹1.6 L | 1,65,000 ₹1.6 L |
Tender Value
₹40.0 L
EMD Value
₹40,100
Closing Date
7 Jan 2026, 11:00 amClosed
Executive Engineer MIDC E AND M
Jog Center MIDC Office 4th Floor Wakadewadi Pune
Shrirampur Industrial Area M and R to WSS for Shrirampur Industrial area Retrofitting and Upgradation of Pump and Allied equipments for Shrirampur water supply scheme at Raw water and Pure water pumping station
2025_MIDC_1263115_1
43/2025
Open Tender
Electrical and Maintenance Works
SHRIRAMPUR
As per NIT
3 documents required · 3 mandatory
₹10,030
₹40,100
30 Mar 2026
24 Dec 2025
8 Jan 2026
24 Dec 2025
7 Jan 2026
31 Dec 2025
24 Dec 2025 - 28 Dec 2025
Amount
Retrofitting and Upgradation of Pump and Allied equipment's
Dismantling & overhauling of Vertical Turbine pumps from the position having 10 mtrs. suspended length (from Bell Mouth to Discharge Head.), cleaning, checking, aligning, assembling i.e., refitting, commissioning with trial run on no load & full load for at least 30 minutes including replacement of spare parts,fastners (which shall be made available by MIDC at free of cost at site of work) etc. complete as per site requirements. Note : For +/- suspended length beyond 10 m, the rate shall be incerased/decreased at +/- 5% per meter.
Supply of Bowl Assembly of WPIL make having model No:- EM10TC/ 4 Stage, Having Serial No:- VH 50028-30.giving discharge 83.33 cum/hr at bowl point head 36 mtr.
Supplying, erecting, testing and commissioning of minimum three & above star rated 3 phase, 415 V, 50 Hz, submersible pump set of 14.92kW/20 HP suitable for erection on open well, pump having delivery head from 60 to 36 m and discharge from 1425 to 825 litres per minute & 80 mm suction/65 mm delivery dia. as per specification no. WP-OSP.
Supplying and erecting 100 mm dia. cast iron double flange sluice valve complete with PN16 pressure rating, as per specification no. FF-VL/SV
Supplying and erecting 100 mm dia cast iron double flange NRV complete with PN16 pressure rating, as per specification no. FF-VL/NRV
Supplying and erecting "B" class G.I. Coupling / Nipple in position with necessary material PW 3-7) 100 mm dia
Providing, fabricating, erecting, M.S. Flanges sleep on type (all tables) of required size and thickness with both side machined. PW 10-1) Up to 300 NB
Supplying and erecting GI pipe 100mm dia ‘C’ class position with accessories complete as per specification no. CW-PLB/GP.
Designing & Providing of LT Panel Board For 2 x 20 HP Openwell Submersible.
Vertical Hollow Shaft Motor TEFC 1500 RPM Providing, erecting and giving test and trial of vertical hollow shaft motor 1500 RPM, squirrel cage induction motor,conforming to IS 12615, class IE3 premium, having continuous rating suitable for operation at 415 Volts +/-10%, 3 Phase, 50 Hz +/- 5% with "F" class insulation temperature rise limited to class "B" insulation. MO 3-1) 18.5 kW ( 25 HP )
Fabrication of spares for the pumping machinery suitable to match with the existing fitments & as per actual site conditions including cost of material, salvage, machining,labour, taxes & duties, incidentals, overheads, packing & forwarding etc. complete as per designation given below. Axel Or Shaft SS -304 or 410
Threaded Sleeve SS-304 or 410
Plain / Collared Bush SS-316
Plain / Collared Bush.... Gun Metal
Plain / Collared Bush.... Neoprene rubber
Check / Lock Nut SS-304 or 410
Threaded Coupling - SS316
Supply of Rubber packing thick for pump/valves, etc
High Tensile Nut Bolt
LT Cables (Aluminum) (CB-LT/AL) Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable, 1100 V 3½ core 70 sq. mm. aluminium conductor complete erected with glands & lugs on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL
Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable, 1100 V 4 core 10 sq. mm. aluminium conductor complete erected with glands & lugs on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL
Plate, Pipe type Earthing (EA-EP) Supplying, installing and testing earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm with funnel with a wire mesh for watering and brick masonry block C.I. cover complete with all accessories of G.I. materials & recording the results as per specification no. EA-EP
Supplying, installing and testing pipe type earthing with 40mm. dia. G.l. pipe or 20 mm dia. G.I. Rod complete with all accessories of GI materials & recording the results as per specification no. EA-EP
Hermetically Sealed transformer (SS-TR-HSL) Supplying, installing, testing & commissioning of 3 phase, 11/0.433 kV, 50 Hz., 100 kVA, Mineral oil immersed and naturally cooled outdoor type, aluminium wound, without gas cushioning, hermetically Sealed transformer, delta/star connected with additional neutral brought out on load side, temperature rise should not exceed 40? by thermometer in oil and 45? by the resistance method in winding at full load rating, using type A winding insulation (kraft paper) with HV tapping (with off load tap changer) off load +2.5 to -5 in steps of 2.5%, having 4 number of tap positions, with standard accessories complete with test certificate with losses below 475 Watts at 50% load, 1650 Watts at 100% load as per IS:1180 (part 1) : 2014 : 2021, with necessary permissions of Electrical Inspector, as per specification no SS- TR-HSL.
Brackets (OH-BKT) Supplying & erecting inline D. P. Structure for 11/0.415 kV, 100 kVA Transformer with R.S.J. Pole 2 Nos. of size 100 x 116 mm x 11 Mtr. Long with suitable Distribution Box of C.R.C.A. Sheet 16 SWG with 4 Pole MCCB 200 Amps as incomer & 6 Nos. 100 Amps Kitkat / MCCB for out going circuits. Transformer D.P. Structure includes the A. B. Switch 200 Amps, D.O. fuse Set & L.A. Set. 2 Nos. of Top channel of size 100 mmx 50 mm for erection of A.B. Switch & 2 Nos. Base channel of size 100 mm x 50 mm for erecting Transformer Channel of size 75 x40 mm for erecting D.O. Fuse Set, L.A., A.B. Switch handle etc. Angle of size 50 x 50 x6 mm for erecting Distribution Box , Transformer Belt etc.as per drawing (min. 124 Kg. iron work ) with necessary clamps, Nut-bolts. V cross arm, top clip, insulators etc. complete with caution board & barbed wire, D.P. Structure shall be erected in c.c. foundation complete
Supplying , erecting & terminating XLPE insulated, galvanised steel formed wire armoured (round) cable , 11 kV(E), 3 x 70 sq. mm. aluminium conductor laid in provided trench / pipe as per specification no. CB-HT
Supplying and laying (including excavation of suitable width & depth up to 90 cm) 90 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, complete.
Cable Joints & End Termination Kits (HT Cables) (CB-JT/HT) Providing and erecting Heat shrinkable outdoor termination kit for 11 KV (E) XLPE HT cable 3 x up to 95 sq. mm. with necessary material as per specification No. CB-JT/HT
Supplying and erecting G.I. stay set for poles, including loop insulators at inaccessible height with anchor plate 300x300x6 mm., straining screws, G.l. stay wire 7/8 SWG, G.l. stay rod 20mmx1.8m length and pole clamps duly erected in provided cement concrete foundation complete.
Providing C.C. foundation (1:2:4) with plastering of size 60 x 60 x 20 cm for Siren motor with nut bolts of required size with 1.2 cm thick hard rubber sheet packing provided in between the foundation and motor base to minimise the jerks and vibration to the slab complete.
Making Cement concrete foundation including excavation (45 x 45 x 120)cm deep in 1:3:6 cement concrete, 20 to 25 mm stone metal, (45 x 45 x 45)cm/ 45cm dia. x 45cm height plinth duly plastered, with necessary curing and finishing complete. (for 6m pole)
Providing & erecting 6 m high (clear height) galvanised octagonal pole with foundation bolts having bottom of 130 mm A/F, top 70 mm A/F on provided foundation as per specification no. OH-PL/OPL
Providing and erecting galvanised 1000mm single arm sword type bracket with FRP dome and ball as per specification no. OH-PL/BKT
Supplying and erecting integrated LED street light fitting 60W IP65 & IK08 class having single piece pressure die-cast aluminium housing, having system lumens output of Min. 6600 Lumens, min. efficacy of 110 lumen/W, CRI>70, CCT upto 6500K, THD<10%, p.f. >0.95, operating range of 140-270V, inbuilt surge protection of 10 kV, Life class of 50,000 Hrs at L70B50 including driver complete with minimum 2 Years warranty as per specification No. FG-ODF/SL.
Supplying & erecting mains with 3x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/bus bars or any other places as per specification no. WG-MA/BW
Supplying & erecting inverter LED batten 20W tube light fitting with polycarbonate housing, heat sink, integrated HF electronic driver, Min. 2600 mA Lithium ion Battery with charging time of 8-10 Hours and backup time of Min. 3 Hrs with minimum 25% of initial Watts having luminous efficacy of 100 lumen/watt, CRI>80, CCT of 6500K and THD<=20 % having useful life of minimum 25000 Hrs with over heat protection with minimum 2 years as per specification No. FG-IDF/LED.
Supplying and erecting GI earth conductor of required sizes used for earthing or any other purposes on wall with necessary GI clamps fixed on wall/cable/ conduit with screws complete.
Supplying and erecting GI strip of required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint in an approved manner with joints required as per specification no EA-EP.
Rebate of old Material
Rebate for Old motors 20 HP
Credit for Dismantled Material H.G. / M.S. / G.I. Materials / Poles etc.
Street/flood light fittings.
Kevla Engineering (BID ID -7146893)
Best Electric Corporation (BID ID -7147751)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.06 MB
TenderDocument.pdf
Tender Documents • 0.28 MB
ItemSpecification.pdf
Tender Documents • 0.06 MB
BOQ_2176588.xls
BOQ • 0.37 MB
Download all tender documents and submit your bid