33 KV line strengthening work, 11 KV line strengthening work and 11 KV New line construction work on Semi-Turnkey basis in Business Plan 2025-26 under the area of EDD, Sikandra, Agra

Part-A (Supply of Material) Holding Clamp for 11 KV Cross Arm

F-Bracket for 11 KV

Holding Clamp

Stone Pad (3000x300x75 MM)

Number Plate with Clamp and Nut & Bolt

Danger Board Plate with Clamp and Nut & Bolt

Al. Paint

Red Oxide Paint

GI Barbed Wire

MS Angle (65x65x6 MM)

MS Angle Holding Clamp

PG Clamp (Dog to Dog)

Nut & Bolt

Al. Jointing Sleeves

11 KV Gaurding Angle

Holding Clamp for 11 KV Gaurding Angle

T-Off Channel with Clamp

Part-B (Erection work) Carriage of PCC Pole 8.5 Mtr. Long from store center agra to work site through Kacha and Pakka road including the work of its loading and unloading at the respective ends including the cost of arrangement of labour, T&P, carrier etc. required for proper completion of work..(Distance 00-70Kms.)

Carriage of ST Pole 11 Mtr Long from store center agra to work site through Kacha and Pakka road including the work of its loading and unloading at the respective ends including the cost of arrangement of labour, T&P, carrier etc. required for proper completion of work.(Distance 00-70Kms.)

Cartiage of Line Material from Store Center Agra to work site through the Kacha and Pakka road including the work of its loading and unloading at the respective ends including the cost of arrangement of labour, T&P, carrier etc. required for proper completion of work..(Distance 00-70Kms.) Line material viz. Clamp for 11 KV V Type Cross Arm (832 Nos.), Polymer Pin Insulator for 11 KV (2577 Nos.), 11 KV Pin (2480 Nos.), Stay Set Complete (154 Nos.), MS Earthing Rod (782 Nos.), 11 KV Disc Fitting (576 Nos.), 11 KV Disc Insulator (546 Nos.), HDPE Pipe (640 Mtr.), GI Pipe 6" Dia (216 Mtr.), ACSR Weasel Conductor, Dog Conductor, Rabbit Conductor, Insulated Dog Conductor, GI Wire 6 SWG, GI Wire 8 SWG, GI Wire 10 SWG etc and other line Material as required in Estimate/Package)

Cartiage of 33 KV XLPE Cable 3x300 sqmm (300 Mtr,), 11 KV XLPE Cable 3x300 sqmm (1480 Mtr.) from store center agra to work site through Kacha and Pakka road including the work of its loading and unloading at the respective ends including the cost of arrangement of labour, T&P, carrier etc. required for proper completion of work.(Distance 00-50Kms.)

Cartiage of 33 KV Cable Jointing Kit 3x300 sqmm O/D (04 Nos), 11 KV Cable Jointing Kit 3x300 sqmm I/D (26 Nos.), 11 KV Cable Jointing Kit 3x300 sqmm O/D (16 Nos.) from store center agra to work site through Kacha and Pakka road including the work of its loading and unloading at the respective ends including the cost of arrangement of labour, T&P, carrier etc. required for proper completion of work.(Distance 00-50Kms.)

Erection and grouting of PCC 8.5 Mtr. long Single Pole in 1:2:4 ratio (cement, sand and bricks balast) including fixing of all accessories as required clamps, Cross Arm, Insulator etc. including Stone Pad as per RESPO norms Labour, T &P and carrier, grouting material etc. required for proper completion of work shall be done by the contractor at his own cost.

Erection and grouting of PCC 8.5 Mtr. long (Double Pole) in 1:2:4 ratio (cement, sand and bricks balast) including fixing of all accessories as required clamps, Cross Arm, Insulator etc. including Stone Pad as per RESPO norms Labour, T &P and carrier, grouting material etc. required for proper completion of work shall be done by the contractor at his own cost.

Erection and grouting of ST Pole 11 Mtr. long Single Pole in 1:2:4 ratio (cement, sand and bricks balast) including fixing of all accessories as required clamps, Cross Arm, Insulator etc. including Stone Pad as per RESPO norms.Labour, T &P and carrier, grouting material etc. required for proper completion of work shall be done by the contractor at his own cost.

Erection and grouting of ST Pole 11 Mtr. long (Double Pole) in 1:2:4 ratio (cement, sand and bricks balast) including fixing of all accessories as required clamps, Cross Arm, Insulator etc. including Stone Pad as per RESPO norms.Labour, T &P and carrier, grouting material etc. required for proper completion of work shall be done by the contractor at his own cost.

Laying sagging stringing binding and jumpering of ACSR Weasel Conductor at 33/11 KV Line as per RESPO norms It includes the cost of labour, T & P carrier etc required for proper completion of work.

Laying sagging stringing binding and jumpering of Dog Conductor at 33/11 KV Line as per RESPO norms It includes the cost of labour, T & P carrier etc required for proper completion of work.

Laying sagging stringing binding and jumpering of Rabbit Conductor at 33/11 KV Line as per RESPO norms It includes the cost of labour, T & P carrier etc required for proper completion of work.

Laying sagging stringing binding and jumpering of Insulated Dog Conductor at 33/11 KV Line as per RESPO norms It includes the cost of labour, T & P carrier etc required for proper completion of work.

Laying of 33 KV XLPE Cable 3x300 sqmm (Double Ckt.) in trench with making loop (at a distance of approx. 4 mtr.) laying of bricks (18 nos. bricks in one meter), filling of sand in trench then laying earth and its levelling and rammuring etc. complete work as RESPO norms as per RESPO Norms and direction by superivising Engineer.

Laying of 11 KV XLPE cable 3x300 sqmm in trench with making loop (at a distance of approx. 4 mtr.) laying of bricks (18 nos. bricks in one meter), filling of sand in trench then laying earth and its levelling and rammuring etc., complete work as RESPO norms.

Laying of 11 KV XLPE cable 3x300 sqmm Through H.D.P.E.pipe at a depth of 1.0 mtr. Below the ground level as per RESPO Norms and direction by superivising Engineer.

Laying of 11 KV XLPE cable 3x300 sqmm (Double Circuit) Through H.D.P.E.pipe by drill machine/H.D.D. Machine including the cost of arrangment of labour, T&P & Drill machine/H.D.D. machine at a depth of 1.0 mtr. Below the ground level.

Laying of 11 KV XLPE Cable 3x300 sqmm through GI Pipe as per RESPO Norms and direction by superivising Engineer.

Filling of 33 KV Cable Jointing Kit 3x300 sqmm O/D and making connection as per respo norms & direction by supervising engineer.

Filling of 11KV Jointing Kit 3x300 sqmm ID/OD and making connection as per direction by supervising engineer.

Erection and grouting of stay set complete ratio 1:2:4 (cement, sand and bricks balast) as per RESPO norms including the cost of arrangement of labour, T&P, carrier etc. required for proper completion of work. Grouting material i.e. cement, sand, brick ballast/stone ballast etc. shall be arranged by the contractor at his own cost.

Fixing of MS Earthing Rod as per RESPO norms including the cost of arrangement of labour, T&P, carrier etc. required for proper completion of work.

Guarding of HT line by laying, stringing, sagging and binding of 2 Nos. parallel GI wire 6/8/10 SWG including fabrication and fixing of guarding angle with holding clamps and fabrication and fixing of X-guards (Tillis) of GI wire at distance of 3 Mtr. including the cost of arrangement of abour, T&P etc.required for proper completion of work.

Concreting of Support PCC/ST Pole. including the cost of arrangement of labour & required material T&P etc for proper completion of work.

Fixing of 'T' off channel with clamp as per resop norms and direction by supervising engineer.

Fixing of F-Bracket for 11 KV as required on Poles as per RESPO norms and direction by supervising Engineer.

Fixing of GI Barbed Wire as required on Poles as per RESPO norms and direction by supervising Engineer.

Fixing of MS Angle (65x65x6 mm) as required on Poles as per RESPO norms and direction by supervising Engineer.

Fixing of P.G. Clamps (Dog to Dog) as per RESPO norms

Fixing of Danger Boards With clmap and Nut & Bolt (shock Proof, Rust Proofs) on Poles as per RESPO norms.

Fixing of Number plates on Poles as per RESPO norms.

Fixing of Al. Jointing Sleeves as per RESPO norms and direction by supervising engineer.

Fixing of Nut & Bolt as per RESPO norms and direction by supervising engineer.

Surface Preparation for Painting on ST Poles including cleaning, sanding and single coat of Red Oxide Paint as per RESPO norms and direction by supervising engineer.

Surface Preparation for Painting on ST Poles including cleaning, sanding and double coat of Alu. Paint as per RESPO norms and direction by supervising engineer.

Cutting/chopping of tree branches obstructing 33KV/11KV Lines & disposal of trimmed material complete as per direction by Supervising Engineer.

Sandries Providing of nuts, bolts, clamps, winding wire, tape & other petty items required for successful completion of the work completely.

Removal of old & Used weasel conductor and receive back to store center agra from work site along with loading unloading both ends (approx 50 to 70 km.).

Gowri Associates (BID ID -5682684)