Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹20.1 LAccepted-Finance N A | PALWAL | HARYANA | 121004 | ₹20.1 L | L1 | Accepted-Finance L1 |
| 2 | L2₹20.1 LAccepted-Finance VILL MADARI KHERA POST MIRRIKALA DISTT UNNAO | UNNAO | UTTAR PRADESH | 209801 | ₹20.1 L | L2 | Accepted-Finance L2 |
| 3 | L3₹20.2 LAccepted-Finance | ₹20.2 L | L3 | Accepted-Finance L3 |
| Sl No | Description | Qty | Unit | M/S MAHESH KUMAR DIXIT L3 | M/S MAHAJAN CONSTRUCTION AND SUPPLIER L1 | M/S DHUNNAR PRASAD L2 |
|---|---|---|---|---|---|---|
| 1.00 | Dismantling cement asbestos or other hard board ceiling or partition walls including stacking of serviceable materials and disposal of unserviceable materials within 50 metres lead | 126.74 | Cum | 46 ₹5,830.04 | 45 ₹5,703.3 Lowest | 46 ₹5,830.04 |
| 2.00 | Dismantling b/w or stone work in lime or cement mortar and including stacking of dismentaled materials as directed by the Engineer-in-chargewith in a distance of 50 meters. | 9.56 | Cum | 1,081 ₹10,334.36 | 1,080 ₹10,324.8 Lowest | 1,081 ₹10,334.36 |
| 3.00 | Dismantling door and windows.chowkhats with hold fast and including stacking of dismentaled materials as directed by the Engineer-in-chargewith in a distance of 50 meters. | 17 | Nos | 184 ₹3,128 | 183 ₹3,111 Lowest | 184 ₹3,128 |
| 4.00 | Dismantling existing plaster and including stacking of dismentaled materials as directed by the Engineer-in-chargewith in a distance of 50 meters. | 128.02 | Sqm | 45 ₹5,760.9 | 44 ₹5,632.88 Lowest | 45 ₹5,760.9 |
| 5.00 | Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D, F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of only fittings, complete all as per approved design, (sectional weight of only steel members shall be measured for payment). Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size | 263.34 | Kg | 108 ₹28,440.72 | 107 ₹28,177.38 Lowest | 108 ₹28,440.72 |
| 6.00 | Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge. Fixing with adjustable lugs with split end tail to each jamb | 37.5 | Rm | 480.99 ₹18,037.13 | 480 ₹18,000 Lowest | 480 ₹18,000 Lowest |
| 7.00 | Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with: 4.0 mm thick glass panes | 11.97 | Sqm | 877 ₹10,497.69 | 876 ₹10,485.72 Lowest | 877 ₹10,497.69 |
| 8.00 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.
35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws | 15.4 | Sqm | 2,864 ₹44,105.6 Lowest | 2,864 ₹44,105.6 Lowest | 2,864 ₹44,105.6 Lowest |
| 9.00 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete. size 300x16mm | 14 | Nos | 250 ₹3,500 | 249 ₹3,486 Lowest | 250 ₹3,500 |
| 10.00 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete. Size200x10mm | 14 | Nos | 82 ₹1,148 | 81 ₹1,134 Lowest | 82 ₹1,148 |
Tender Value
₹20.2 L
EMD Value
₹40,320
Closing Date
3 Jul 2026, 2:30 pmClosed
EE UDSC UNNAO
EE UDSC CIVIL LINE UNNAO
Renovation of site office building at Dalmau B Pump House Lot 01
2026_UPIDC_1163256_1
03/EE-UDSC/2026-27
Open Tender
Civil Works - Canal
Item Wise
20 days
UNNAO
3 documents required · 3 mandatory
₹2,724
₹40,320
5 Aug 2026
27 Jun 2026
4 Jul 2026
27 Jun 2026
3 Jul 2026
27 Jun 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Dismantling cement asbestos or other hard board ceiling or partition walls including stacking of serviceable materials and disposal of unserviceable materials within 50 metres lead | 126.74 | Cum | - | - |
| 2 | Dismantling b/w or stone work in lime or cement mortar and including stacking of dismentaled materials as directed by the Engineer-in-chargewith in a distance of 50 meters. | 9.56 | Cum | - | - |
| 3 | Dismantling door and windows.chowkhats with hold fast and including stacking of dismentaled materials as directed by the Engineer-in-chargewith in a distance of 50 meters. | 17 | Nos | - | - |
| 4 | Dismantling existing plaster and including stacking of dismentaled materials as directed by the Engineer-in-chargewith in a distance of 50 meters. | 128.02 | Sqm | - | - |
| 5 | Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D, F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of only fittings, complete all as per approved design, (sectional weight of only steel members shall be measured for payment). Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size | 263.34 | Kg | - | - |
| 6 | Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge. Fixing with adjustable lugs with split end tail to each jamb | 37.5 | Rm | - | - |
| 7 | Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with: 4.0 mm thick glass panes | 11.97 | Sqm | - | - |
| 8 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.
35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws | 15.4 | Sqm | - | - |
| 9 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete. size 300x16mm | 14 | Nos | - | - |
| 10 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete. Size200x10mm | 14 | Nos | - | - |
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.58 MB
Tendernotice_2.pdf
PDF • 1.11 MB
BOQ_2180722.xls
BOQ • 0.26 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].