Preventive maintenance of HT / LT / lighting overhead line of various rehab villages under Dipka Area (Route length - about 10KM).

Trimming of tree branches under the over head line conductor and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared, etc. as required (Trimming of tree branches required for about 3 KM out of 10 KM (approx.) OH line)

Erection/ replacement of damaged 10/ 11/13 mtr. long steel tubular poles including excavation of pole pit as per site conditions and grouting by cement concrete 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 40 mm nominal size) etc (0.38 cum each pole)

Supplying & Erection of galvanised stay set for 11 KV over head lines complete with 19/ 20 mm dia X 1.8 metres long stay rod, anchor plate of size 45 cm X 45 cm X 7.5 mm thick, thimble, stay clamps, turn buckle (20 mm X 600 mm), 7/ 4.00 mm dia G.I. stay wire and 11 KV strain insulator etc in cement concrete 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required

Stringing of Dog conductor (all 3 Nos. conductor), including un-coiling from drum at stockyard, loading onto departmental vehicle, transporting to site and unloading, laying of conductor along route, stringing and binding on insulators and jumpering etc. as required.

Stringing of conductor Rabbit conductor (all 3 Nos. conductor), including un-coiling from drum at stockyard, loading onto departmental vehicle, transporting to site and unloading, laying of conductor along route, stringing and binding on insulators and jumpering etc. as required.

Laying & stringing of 8 SWG GI wire earth

Fabrication & erection of MS Channel/Angle/Flat for bracket or clamp as per requirement.

Supplying and fixing of MS nut, bolt of different size as required

Erection of cradle guarding wire between the span including binding of guard wire.

Providing & erection of Pin insulator (100 mm X 80 mm) with G.I. spindle and nuts, 1.1 KV grade