Installation, testing and commissioning of electro-mechanical machinery alongwith allied works at WSS Kud stage-1st

Amount

Carriage, fitting, installation, testing and commissioning of 8000 GPH x 380 meter head HC pump set with suitable prime mover (to be provided by the department) alongwith allied accessories at pumping station Kud by way of shifting the same from divisional store Malhar upto the road side nearest to pumping station Kud, unloading the same from vehicle manually using tools and tackles and then dragging up to pumping station on channels / pipes using pick axes, crowbars, ropes, etc. and stacking inside pump-room. The job further includes earthwork in bulk excavation for making foundation block upto the depth of about 1.5 meters so as to form a size of 6’x3’x4’.Dumping of excavated material outside the pump room at a distance of about 50 meters. Providing and Fabrication of 06 nos. foundation bolts of suitable thickness one meter long by threading them at one end and making of anchor to other end. Laying of bed concrete of 1:4:8 mix using 20 percent aggregate, laying of RCC of 1:1.5:3 mix including supply/fixing of farm work / shuttering, aggregates, sand and cement, reinforcement steel tor 10mm for mesh and all RCC work, angle iron for supporting/alignment of base-frame including cutting, bending, placing in position and binding, welding, placing of foundation bolts with base frame and making proper alignment of base frame horizontally as well as longitudinally, deployment of vibrator, mixer, welding set, shuttering, tools and tackles etc. and curing complete. Job further includes dragging of pump motor set from the stacking place and then placing it on the base frame by manual labour and other tools and tackles, Leveling and alignment of pump motor set on the base frame by using laminated sheet, strips, gauges and coupling thereof. Providing / laying of 80mm / 65mm dia GI suction and 100mm / 80mm dia delivery pipe lines to the pump set by providing/cutting of required dia GI pipes approximately as per site requirement in the convenient lengths and also interconnecting the suction and delivery pipe line with the GSR / sump and rising main respectively with the help of oxygen acetylene gas / electrode welding. The cut edges shall be grinded with grinder to give them a smooth and even surface and then laying, aligning, welding of suction / delivery pipes in continuous fillet weld using superior quality electrodes conforming to ISI specifications. Providing, fabrication and fitting of 100mm/80mmdia MS bends, 100mm/80mm dia MS flanges, expanders, reducers, gaskets, nuts, bolts etc. as per site requirement, providing/fitting of 100 / 80mm dia heavy duty CS sluice valve and NRV-01no. each to the delivery pipe line and 80 mm dia foot valve / suction valve heavy duty as per site requirement to the suction pipe line conforming to ISI make including nuts, bolts, gasket flanges etc. etc. Job further includes providing, fabrication and fitting of 100mm dia GI pipe delivery manifold outside the pump room and connecting with delivery pipe line using oxygen acetylene gas system. The job involves providing and fitting of chain pulley block of 3 ton capacity. Testing and commissioning of pump motor sets with allied accessories by way checking of all electrical connections and testing on no load and subsequently on full load. Complete job includes cost of material, transportation / head load charges loading /unloading, hire charges of tools and tackles, gas cutting, appliances, welding set, shuttering, vibrator, mixer, skilled / unskilled labour charges etc. Complete job.

Vaibhav Engineers and Technocrates

VEE AUTO TRADERS