Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹21.0 LAccepted-AOC | L1 | Accepted-AOC Lowest bidder | |
| 2 | L2₹22.3 L+₹41,351.50 (1.89%)Rejected-Finance | L2 | Rejected-Finance Other than lowest bidder | |
| 3 | L3₹23.1 L+₹1.3 L (5.81%)Rejected-Finance HOUSE NO 87 SHAH FAISAL ABAD DHOBI MOHALLA BATAMALOO SRINAGAR 190009 | SRINAGAR | SRINAGAR | JAMMU AND KASHMIR | 190009 | L3 | Rejected-Finance Other than lowest bidder | |
| 4 | L4₹24.0 L+₹2.1 L (9.78%)Rejected-Finance | L4 | Rejected-Finance Other than lowest bidder | |
| 5 | L5₹24.0 L+₹2.1 L (9.83%)Rejected-Finance R O IQBAL MARKET AALI MAJID EIDGAH SRINAGAR KASHMIR | SRINAGAR | JAMMU AND KASHMIR | 190001 | L5 | Rejected-Finance Other than lowest bidder |
Tender Value
₹30 L
EMD Value
₹60,000
Closing Date
23 Oct 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Maj. Sujith Mohan, GE
Garrison Engineer 864 Enggr Wks Sec, PIN-913864,C/o 56 APO
CERTAIN MISC REPAIR WORK TO THE E/M INSTALLATION UNER AOR OF AGE B/R III, AT BB CANTT, SRINAGAR
2023_MES_619436_1
864/WS-64/2023-24
Open Tender
Civil Works
Item Rate
180 days
B B Cantt.
AS PER TENDER
7 documents required · 7 mandatory
₹500
GE 864 EWS
₹60,000
Yes
1 Dec 2023
18 Sept 2023
28 Oct 2023
18 Sept 2023
23 Oct 2023
9 Oct 2023
Amount
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.
M&L for providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand, complete all as specified and as directed.
M&L for chequered cement concrete tiles 20cm x 20cm x 22 to 25mm thick, with grey cement and pigments set, jointed and pointed in neat cement slurry in floors, laid over and including 15mm thick screed bed or bedding layer of cement mortar in (1:4) complete all as specified and as directed.
M&L for glazed ceramic coloured tiles in vertical surface 450 x 300 x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tile over and including 10 mm thick backing coat in cement mortar (1:3) complete all as specified and as directed.
M&L for glazed ceramic coloured tiles in vertical surface 300 x 200 x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tile over and including 10 mm thick backing coat in cement mortar (1:3) complete all as specified and as directed.
M&L for acid resistant tiles 15mm thick vitreous ceramic, unglazed, set, jointed and pointed in chemical resistant mortar, resin type, in floors over and including 15mm thick screed bed or bedding layer of cement mortar in (1:4) complete all as specified and as directed.
M&L for Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and including 15mm thick screed bed or bedding layer of cement mortar in (1:4) complete all as specified and as directed.
M&L for Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and including 15mm thick screed bed or bedding layer of cement mortar in (1:4) complete all as specified and as directed.
Demolition of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed.
M&L for brick work with sub class 'B' bricks (old size), straight or curved on plan exceeding 6 mtr mean radius built in CM (1:6) complete all as specified and as directed.
Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and as directed.
M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM (1:4), rendering is to be finished even and smooth (without using extra cement) complete all as specified and as directed.
M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM (1:6), rendering is to be finished even and smooth (without using extra cement) complete all as specified and as directed.
Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed.
S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and as directed.
S&F 0.63mm thick galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with L-type or J-type or cranked hook bolts , in roofs, walls etc. with grade of zinc coating 275 complete all as specified and as directed.
S&F 0.63mm thick plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and as directed.
S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and as directed.
S&F 2mm thick fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with L-type or J-type or cranked hook bolts in roof, wall etc complete all as specified and as directed.
Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed.
M&L for 25 mm thick cement concrete (1:2:4) type B0, (using 12.5mm graged crushed stone aggregate) as in sub base/ leveling courses, concerete surfaces to be finished even and fair complete all as specified and as directed.
M&L for 40 mm thick cement concrete (1:2:4) type B1, (using 20mm graded crushed stone aggregate) as in floors finished even and smooth without using extra cement including 38mm wide and 3mm thick glass deviding strips complete all as specified and as directed.
M&L for 75 mm thick cement concrete (1:4:8) type D2 (using 40 mm graded crushed stone aggregate) as in sub base of flooring/ hard standing complete all as specified and as directed.
M&L for 75 mm thick cement concrete (1:3:6) type C2 (using 40 mm graded crushed stone aggregate) as in Plinth Protection, concrete surface is to be finished even and smooth without using extra cement complete all as specified and as directed.
M&L for providing, cement concrete (1:2:4) type B1 (using 20 mm graded crushed stone aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and as directed.
M&L for factory made precast cement concrete (1:2:4) type B1 (using 20mm graded crushed stone aggregate) as in road side kerb stone of size & shape as directed by Engineer-in-charge and set in cement mortar (1:4) complete all as specified and as directed.
M&L for plain cement concrete (1:3:6) type C2, (using 20 mm graded crushed stone aggregate) as in surface channels and drains complete all as specified and as directed.
Demolition of cement concrete (reinforced) in ground floor and paving n.exc 15 cm thick below or above ground level complete all as specified and as directed.
M&L for reinforced cement concrete (1:2:4) type B1, (using 20 mm graded crushed stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, manhole cover, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.
M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.
M&L for rolled mild steel sections as in framing for cladding, glazing and the like fixed with angle cleats and connecting plates, etc. conforming to Fe-290 Grade (E-165) complete all as specified and as directed.
M&L for mild steel framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe-290 Gde-E-165 complete all as specified and as directed.
M&L for rolled mild steel plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming to Fe 410-W (Gde- E-250) quality- A complete all as specified and as directed.
M&L for preparation of old decorated plastered/ unplastered wall surfaces and applying a coat of white wash complete all as specified and as directed.
M&L for preparation of old decorated plastered/ unplastered ceiling surfaces and applying a coat of white wash complete all as specified and as directed.
M&L for preparation of old decorated plastered/ unplastered wall surfaces and applying a coat of cement base paint complete all as specified and as directed.
M&L for preparation of newly plastered/ unplastered wall surfaces and applying two coats of cement base paint complete all as specified and as directed.
M&L for preparation of old decorated plastered/ unplastered wall surfaces and applying two coats of oil bound distemper complete all as specified and as directed.
M&L for preparation of newly plastered/ unplastered wall surfaces and applying applying two coats oil bound distemper over a coat of primer complete all as specified and as directed.
M&L for complete removal of existing treatment on walls by scraping and washing down with water and applying two coats of oil bound distemper over a coat of primer and over wall care putty complete all as specified and as directed.
M&L for preparation of newly or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.
M&L for preparation of old painted wood and wood based surfaces of any description, not otherwise described, over 10cm width or girth and applying a coat of synthetic enamel paint complete all as specified and as directed.
M&L for preparation of newly plastered/ unplastered wall surfaces and applying two coats of exterior acrylic emulsion paint over a coat of primer complete all as specified and as directed.
M&L for preparation of old painted steel surfaces of any description not otherwise described over 10cm width or girth and applying a coat of synthetic enamel paint complete all as specified and as directed.
M&L for preparation of new or previously untreated steel surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and as directed.
Taking down chowkhats or frames with shutters (without taking off shutters from the frame) exc 1.5 sqm but n exc 4 sqm each complete all as specified and as directed.
Taking down chowkhats or frames with shutters (without taking off shutters from the frame) n.exc 1.5 sqm each complete all as specified and as directed.
Taking down shutters of any description n exc 1 Sqm each complete all as specified and as directed.
Taking down shutters of any description exc 1 sqm and n exc 2 sqm each complete all as specified and as directed.
S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed tothe stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and as directed.
S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and as directed.
S&F 30 mm thick second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, etc, sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a), supplied and fitted to chowkats complete all as specified and as directed.
S&F 30 mm thick second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and as directed.
S&F 35mm thick plain framed, panelled factory made shutter (two panel) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), second class hard wood kiln seasoned and chemically pressure treated complete all as specified and as directed.
S&F 100 mm size, butt hinges, medium weight, cold rolled mild steel complete all as specified and as directed.
S&F 100 mm size aluminium handles, cast type, anodised complete all as specified and as directed.
S&F 150 mm long aluminium anodised, barrel tower bolts of extruded section complete all as specified and as directed.
Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and as directed.
S&F 3mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane complete all as specified and as directed.
S&F galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed.
S&F in repairs galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed.
Dismantling unframed timber scantling 40 Sqcm and over in section in any position complete all as specified and as directed.
M&L for second class hard-wood in scantling, clean sawn, timber framed complete all as specified and as directed.
Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/ slabs/ blankets, any thickness, including cover fillets complete all as specified and as directed.
S&F plywood 6 mm thick grade BWR, type BB fixed with nails to timber frame work complete all as specified and as directed
Dismantling timber in fillets, rails, posts, rafters, purlins, etc. under 40 sqcm in section complete all as specified and as directed.
M&L for second class hard-wood in scantling, clean sawn, in any position in timber framed work, complete all as specified and as directed.
Demolition of stone slabs and tiles of any description or thickness in floors, aprons laid, bedded and pointed in any mortar etc. complete all as specified and as directed.
M&L for granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing laid over and including 15 mm thick screed bed or bedding layer in CM (1:4) complete all as specified and as directed.
S&F in repairs for vitreous china squatting pan 'Orissa' pattern long pan size 580 x440 mm white with integral foot rests (excluding cistern and flush pipe), complete all as specified and as directed.
S&F in repair PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, 10 litres capacity, and connections to pipes complete all as specified and as directed.
S&F in repair Vitreous china wash basin white flat back size 580x450 mm excluding taps waste chain and plug and porcelain stopper but including brackets, any size, including cutting for and pinning in ends of brackets or erecting stand including waste pipe & 15 mm bore brass CP mixer for mixing hot & cold water screwed down for iron pipe complete all as specified and as directed.
S&F in repair 15mm bore Angle valve / Stop valve cast copper alloy chromium plated fancy type without shank and cup concealed type srewed for iron pipe or for union complete all as specified and as directed.
S&F in repair PVC flexible connections PTMT 600mm long 15mm dia with flange nuts & washers complete all as specified and as directed.
Taking up or down 15mm bore dia, steel tubing & connections including cleaning for refixing or removal to store complete all as specified and as directed.
Taking up or down 20mm bore dia, steel tubing & connections including cleaning for refixing or removal to store complete all as specified and as directed.
S&F 15mm bore steel water tubes, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.
S&F 20mm bore steel water tubes, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.
S&F in repair 15mm bore Bib taps cast copper alloy with crutch or butterfly handles screwed down screwed for iron pipe complete all as specified and as directed.
S&F in repair 20mm bore stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and as directed.
S&F in repairs, 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed.
S&F in repairs, 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed.
S&F in repairs 75mm bore PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and as directed.
Dismantling water tanks and removing to store of capacity exc 250 & n exc 500 ltr complete all as specified and as directed.
S&F rotational moulded polyethylene water storage tanks of capacity 500 ltrs (cylindrical vertical with closed top) triple layered hoisted and fixed in position all as specified in SSR Part I complete all as specified and as directed.
Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement including dismantling old unserviceble railings any type complete all as specified and as directed.
M/S Ghulam Mohammad Shalla
M/s Lal Enterprises
M/S PARVEZ AHMAD LONE
M/S SHIMAR STAR GLACIER
M/S ATTAR BUILDERS
M/S Vivek Gupta and Co
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .