Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance C O M KHARKARANG LUMJINGSUK BLOCK A MADANRTING SHILLONG 793021 | SHILLONG | EAST KHASI HILLS | MEGHALAYA | 793021 | Admitted-Finance |
| 3 | Admitted-Finance C O GIVEN GOD NONGTDAU ARBUTHNOT ROAD NONGRIMMAW LAITUMKHRAH SHILLONG PIN 793011 | SHILLONG | EAST KHASI HILLS | MEGHALAYA | 793011 | Admitted-Finance |
Tender Value
₹42.5 L
EMD Value
₹85,000
Closing Date
22 Aug 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE SHILLONG
HQ CWE SHILLONG SE FALLS SHILLONG 793011
ADDITION/ALTERATION TO GARAGES OF BLDG NOS MES-50, MES-51, MES-52 AND MES-53 AT ANJALEE COMPLEX SHILLONG CANTT
2022_MES_523697_4
8551/SHL/E8
Open Tender
Civil Works - Others
Item Rate
180 days
SHILLONG
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE SHILLONG
₹85,000
Yes
24 Aug 2022
3 Aug 2022
23 Aug 2022
3 Aug 2022
22 Aug 2022
10 Aug 2022
60 days
Amount
Dismantling of plain or corrugated AC/ steel /fibre glass reinforced transluscent sheeting any guage thickness including nainital or similar pattern roof covering complete all as specified and directed.
Demolition of Brickwork/solid concrete block work built in Cement mortar complete all as specified and directed.
Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.
Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.
Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified and directed.
Excavation in trenches n.exc 1.50m wide and n.exc 1.50m in depth and getting out in hard/dense soil complete all as specified and directed.
Returning, filling in, including, spreading, leveling, watering and well ramming in layers n.exc 25cm all as specified and directed.
Removing excavated material n.exc 50m and depositing where directed at a level n.exc 1.50m above the starting point complete all as specified and directed.
M&L for PCC (1:4:8) type D-2 using 40mm graded stone aggregate as in foundation complete all as specified and directed.
M&L for RCC M-25 (Design Mix) using 20mm graded stone aggregate as in foundations, including footings , plinth beams, bases for columns etc using stone raft complete as specified and directed.
M&L for RCC M-25 (Design mix) using 20mm graded stone aggregate as in column, pillar, pier, post etc complete as specified and directed.
M&L RCC M-25 (Design mix) using 20mm graded stone aggregate for beams, cantilevers , bressumers , lintels over 1.5 span complete as specified and directed
M&L for RCC M-25 (Design mix) using 20mm graded stone aggregate as in slabs supported on walls ,beams and columns in floors roofs , landings , balconies canopies etc complete as specified and directed
M&L formwork to sides of plinth beams , foundations and other similar works complete all as specified and as directed.
M&L formwork to sides of pillars, posts,struts, piers, columns and like complete all as specified and directed
M&L formwork to soffits of suspended slabs such as roofs slabs , floor slabs etc complete all as specified and directed
M&L formwork to sides of and soffits of floor or roof beams complete all as specified and directed
M&L precast cement concrete block massonry with solid blocks exc 10 cm in width and settings in CM 1:6 type C1 1:3:6 (20mm graded aggregate) complete all as specified & directed.
M&L precast cement concrete block masonry with solid blocks nexc 10 cm in width and settings in CM 1:4 type C1 1:3:6 (20mm graded stone aggregate) complete all as specified and directed.
M&L hard core of broken stone or boulders of guage not exc 63mm but n exc 40mm deposited spread and levelled in layers n.exc 15 cm thick, watered and rammed to a true surface complete as specified and directed.
M & L 100mm thick PCC 1:3:6 type C2 using 40mm graded stone aggregate as in subfloor finished even and fair without using extra cement complete all as specified and as directed.
M & L 40 mm thick PCC 1:2:4 type B1(20 mm graded) stone aggregate as in subfloor finished even and fair without using extra cement complete all as specified and as directed.
M&L for 75 mm thick PCC (1:3:6 ) type C -2 using 40mm graded stone aggregate as in Plinth protection finished even and fair without using extra cement complete all as specified and as directed.
M&L for rendering 15mm thick on fair faces of brick work in CM 1:4 finished even and fair without using extra cement using WPC complete as specified and directed. NOTE : WPC shall be measured and paid separately.
Supply only Integral waterproofing compound complete as specified and directed.
M&L for rendering 15mm thick on fair faces of brick work in CM 1:6 finished even and fair without using extra cement complete as specified and directed.
M&L TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete as specified and directed.
M&L TMT bars 5 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally in stirrups with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete as specified and directed.
M&L Steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade ST-240 complete as specified and directed.
Fixing only Steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade ST-240 complete as specified and directed.
M&L for preparation of new steel surfaces exc 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified & directed.
M&L for preparation of new wall surafces and applying two coats of white wash complete as specified and directed.
M&L for preparation of new wall surafces and applying two coats of acrylic emulsion paint , anti fungal resistance , dirt resistance exterior paint of required shade including primer coat and 1 mm thick exterior putty on new surfaces complete as specified and directed.
Material and labour for Point wiring with 1.50 Sqmm single core PVC insulated , unsheathed cable FRLSH, 1100 volt grade with multi stranded copper conductor drawn through and incuding medium grade, ISI marked, PVC conduit not less than 20 mm dia with accessories, concealed on wall/ceiling and incuding provision of 1.50 Sqmm single core PVC insulated , unsheathed cable FRLSH, 1100 volt grade with multi stranded copper conductor green colour as earth continuity conductor and connected to common earth dolly with suitable size of lugs, including mild steel sunken box/metal flush box with suitable modular or pressed steel terminal boxes made out of 1.6 mm thick mild steel sheet metal conforming to IS-5139(pt-I) of 1969 and IS:14772-2000 with earth dolly and coated with two coats of anti corrosive paint over a coat of red oxide primer both internally and externally including provision of new 3 mm thick plastic laminated sheet top cover for housing the switches , socket outlets, fan regulators etc. with brass screws and brass washers and making good the disturbed surfaces as per existing for one light point controlled by one switch. Note :- Switch, socket and fan regulators to be measured and paid for separately . PVC Conduit confirming to IS 9537 part I & III
All as per Srl item No.34 here in before but for socket outlet point 5 Amp on same board.
All as per Srl item No.34 here in before but for socket outlet point 5 Amp on Independent board.
Supply and fixing modular switch 1 way 6 A module 230/250 volt , AC supply, ISI Marked, with white cover plate with frame complete all as specified and directed.
Supply and fixing ceiling rose surface bakelite 65x50 mm, 3 terminal complete all as specified & directed.
Supply and fixing LED light fitting 1x 20W, 220V,AC decorative box type, warm white / white type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete complete pre wired fixed to wall with 2 nos PVC block of suitable size complete all specified and directed.
Supply and fixing LED security Building light LED 25 Watt , pressure die cast aluminum housing, heat resistant glass, IP65 protection, better optics for uniform distribtion complete with all accessories internally pre wired and including connecting up with three core 1.5 sqmm flexible copper conductor cable from ceiling rose to connector of light complete.
Supply and fix MCB Distribution board , 240 volts single pole and neutral ,double door, sheet steel, enclosure powder coated with 100 Amps rated busbar with neutral link, 8 ways , fixed on wall duly grouted in solid block wall or on wooden board with electrical connection, including taking down complete all as specified and directed.
Supply and fix MCB DP, 240 Volts, 40 Amps, 10 kA rupturing capacity 'C' series complete all as specified and directed including taking down old one.
Supply and fix in repair MCB, single pole 240 volts 6 to 32 Amps capacity fixed in DB's including taking down old one.
M & L Sub main wiring with two run single core 6 Sqmm FRLSH copper conductor cable PVC insulated, unsheathed, 1100 V including 20 mm dia concealed on wall/ceiling in PVC conduit, medium grade ISI marked with all accessories such as Tees, elbows, junction boxes etc, as required fixed on wall along with one run of 6 Sqmm single core PVC FRLSH insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board / distribution board and testing on completion including taking down old wiring etc complete all as directed. Note: (i) Two runs of 4 sqmm and one run of 6 sqmm cable and one run of PVC conduit shall be measured as one RM. (ii) Cutting of chases in the wall of appropriate size shall be carried out with electric cutter machine . (iii) Necessary plastering in the disturbed surface of wall and distempering /white washing to match the existing colour shall be included in the unit rate quoted.
Excavation in trenches not exceeding 1.5mtr. In depth and not exc 1.5mtr in width and getting out in soft/ loose soil for laying of cable etc complete as specified and directed.
Supply lay/spread in trenches , river sand ,clean ,including spreading ,levelling ,punning for laying /cushioning of cables all as specified and as directed.
Supply & laying in trenches, old size sub class “B” bricks disignation for cable protection complete as specified and directed.
Supply, laying, testing and commissioning in trenches, floors ,fix on wall/pole, passing through pipes etc.,LT UG cable , 1100 volts grade, PVC/ XLPE insulated , with multistranded aluminium conductors, armoured with galvanised steel wire or tape ,gland, lugs etc of size 16 Sqmm 2 core , confirming to IS specifications complete as specified and directed.
Supply and fix on pole / wall or lay in trenches under road / drain crossings etc., for drawing cables, GI pipe light grade 50mm bore, ISI marked of following sizes including necessery fittings ,clamps, bolts , nuts etc. complete as specified and directed.
Material and labour for earthing complete with galvanised steel earth plate electrode 600 X 600 X 6 mm buried directly in ground vertically to a depth notless than 2.25 mtr deep below ground level with top edge of earth plate at a depth not less than 1.5 m below normal ground level connected to galvanised earth lead wire 4.0 mm dia by means of bolts, check nuts and washers ,galvanised steel and protected by GI pipe 15 mm bore light grade & connected to main switch board or main control board as directed and including concrete pit in PCC (1:3:6) type C1, precast RCC (1:2:4) type B1 cover slab 30 cm X 30 cmX 5 cm with 10mm dia TMT bars 8 cm C/c both ways and one handle for lifting made out of 8 mm dia TMT bar, funnel, wire mesh, 20mm bore galvanised iron pipe (medium grade) for watering, charcoal or coke and salt in alternative layers, necessary excavation and earth work in any type of soil and including necessary testing complete all as shown in Electrical Plate No 3 of SSR part -I.
M/s J. C. CONSTRUCTION
Bhuiya Construction
Bidder Name
Bhuiya Construction
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .