Estimate for Beautification of Kanjli Wetland by providing walk way Cycle track along the bank of Flour Mill Channel in Kapurthala City

Amount

E/Work Excavation in Foundation of Structure as per drawing and Technical Specification including setting out construction of shoring and bracing removal of stumps and other deleterious matter dressing of sides and bottom and back filling with approved material . B (a) by mechanical means depth up to 3 meters.

Excavation in soil ( any type) Using hydraulic JCB and hydraulic tractor trolly with disposal up to 21.36 KM pucca from outside borrow pits along bank of canal I/C cutting and loading in trolly with all leads and lifts , complete in all respect as per PWD specification & directions of Engineer in charge

Making New boundary road including leveling and dressing 3 mtr to 5 mtr wide . (a) unploughed land

Plain cement concrete M-20 grade precast Kerb 250 mm high with bottom width 165 mm and top width 115 mm fixed in position inclucing carriage to site of work complete as per technical clause 408 of MORT&H Specification

Providing and laying lean cement concrete 1:5:10 (0.25’) below M-15 cement concrete on Walkway and cycletrack with 40mm gauge stone aggregate using concrete mixer volumetric type

Shuttering for concrete faces M-15 and lean concrete in all respect as per PWD specification & directions of Engineer in charge

Providing and laying Cement concrete (M15) 0.33 , or 4.0" thick on lean concrete for cycle track both side with red oxide colour and for walkway black and white concrete alternative colour as per drawing mixed in automatic computerized batching and mixing Plant and transported to the site in transit mixers including supply and carriage & loading unloading of all material complete in all respect as per specification and Direction of Engineer in Charge.

Providing and fixing RCC Garden benches in Length of 5 ft size and weighing minimum 250 kg per bench along the length comprising back and seat ,painted suitably with decorative Red / yellow / green in colour for mounting ,36 " in Height and 16" in width complete as per the drawing including the cost towards loading , transportation , unloading , fixing /grouting at site .

Providing & Installing of Electric Pole having 24 inch Base of Cast Iron in Height with window and cover ,having threading on top of base of 75 mm dia. connected to 75mm dia. GI Pipe of length 42 inch, connected to a Reducer of C.I. of height 6 inch having botttom threading for 75 mm dia GI Pipe & top threading for 50mm dia. GI pipe of Length 42 inch painted with primer and Hamilton colour having Black and copper tone shade having Heritage look.

Providing & installing of Kathpal Ornamental Post Top Fixture is made out of Die cast body of 27 " x 16"Copper tone as per picture attached , with holder suitable for LED Lamp up to 30 watt Fross Diffuser Translucent for glare free lighting.

Providing and fixing Wipro Warm Light LED lamp 23- watt having 2 years warranty

Providing & Installing of Electronic LED Display Board (4 Feet x 2 feet )fitted on Iron Stand of size 10Feet height with MS Angle (50 x50x6 mm )having display Black Body and Letters in Red Colour, with Letters in Header & Footer in Running conditions,With Parameters and Values on Actual Basis.

SHEET METAL DOUBLE DOOR DISTRIBUTION BOARD FOR MCB/ RCBO/ RCCB's: Supply and erection of sheet metal double door distribution boards of suitable size and of required no. of ways for mounting miniature circuit breakers/ RCBO's/ RCCB's in the existing MCB distribution board as per PWD General Specifications 2010 including connections with suitable size of thimbles and bonding to existing earth etc. GROUP-A: (Siemens (Beta Guard/Minigard), Legrand (Ekinoxe) & Schneider (Neo Break), L&T (Hager vision+) A) Sheet metal double door T.P. & N. (vertical design) distribution board (dust protected) provided with bus bar, neutral link and din bar, suitable for incorporating FP/ TPN MCB's/ isolators for incoming and DP/ SP & N/ Single Pole MCB's/ RCBO/ RCCB's for outgoing 12 way each

MINIATURE CIRCUIT BREAKERS/ RCBO's/ RCCB's: Supply and erection of Miniature Circuit Breakers/ RCBO's/ RCCB's in the existing MCB distribution board as per PWD General Specifications 2010 including connections with suitable size of thimbles/lugs. GROUP-A: (Siemens (Beta Guard), Legrand (Lexic) & Schneider (Neo Break), L&T (Hager) A) Miniature circuit breaker triple pole 40amp. (Breaking capacity 10kA, Curve-C) suitable for 240/ 415 volts 50cycles AC supply

Supply and erection of Moulded Case Circuit Breaker (Panel mounting Cubicle type) in the existing Cubical Panel (conforms to IEC:60947-II) and relevant PWD general specifications 2010 complete with G.I. Bolts, Nuts & Connection on both sides of MCCB with sutiable size of Thimbles etc. MCCB (Fixed Type Thermal and Magnetic Protection Make: L&T (DU/DH), ABB (T-MAX), Schneider (CVS), Seimens(3VT1/3VL)): 100 amp. 415 volts breaking capacity 25kA four pole fixed type thermal and magnetic setting MCCB unit

XLPE/ PVC INSULATED ARMOURED CABLES (LOOSE): Supply & laying of aluminium conductor XLPE/ P.V.C. insulated armoured and served cable to be laid loose in the existing trench or pipe as per PWD General Specidications 2010:- A) Aluminium conductor XLPE/ PVC insulated PVC sheathed armoured and served cable working voltage 1100volts grade 25sq.mm (3.5 Core)

Aluminium conductor XLPE/ PVC insulated PVC sheathed armoured and served cable working voltage 1100volts grade 16sq.mm (4 Core)

MINIATURE CIRCUIT BREAKERS/ RCBO's/ RCCB's: Supply and erection of Miniature Circuit Breakers/ RCBO's/ RCCB's in the existing MCB distribution board as per PWD General Specifications 2010 including connections with suitable size of thimbles/lugs. GROUP-A: (Siemens (Beta Guard), Legrand (Lexic) & Schneider (Neo Break), L&T (Hager) A) Miniature circuit breaker single pole 6 to 32amp. (Breaking capacity 10kA, Curve-C) suitable for 240/ 415 volts 50cycles AC supply.

DOUBLE WALLED CORRUGATED (DWC) HDPE PIPES: Supply and erection of double walled corrugated (DWC) HDPE pipe to be laid 1mtr. below ground level including excavation (making necessary trench), placing the pipe in position and back filling with excavated soil etc. of the required size. A) Double walled corrugated (DWC) HDPE pipe 50/ 38mm (outer/ inner dia.)

COPPER EARTHING: A) Earthing of Sheet metal/ iron clad switches and metallic cases etc., with no. 7/14 S.W.G (7/2. 18mm dia) DI wire in 20mm dia G.I pipe partly recessed and partly on surface complete with 135 cm long 50mm dia G.I earth pipe with G.I reducing socket (50mm x 20mm) including erection of the same, 10m below ground level with nessary charcoal and salt mixture ect, up to 13 m in length including boring and refilling.

PVC INSULATED SINGLE CORE FRLS COPPER CONDUCTOR CABLE: PVC INSULATED PVC SHEATHED TWIN FLEXIBLE COPPER CONDUCTOR CABLE: Supply and erection of PVC insulated PVC sheathed twin flexible wire with copper conductor complete in all respect as desired by the Engineer-in-charge. A) PVC insulated copper conductor single core FRLS cable (ISI marked) overall 4 sq.mm, 1100volts grade

PVC insulated PVC sheathed twin flexible wire with copper conductor of size 1.5 sq.mm (48/0.20mm)

SHEET METAL CUBICAL PEDESTAL, TOWER STRUCTURES HT & LT MISCELLANEOUS ITEMS: S/E of SMCpedestal made from 50mmx50mmx6mm thick MS angle iron frame with 5 sides welded & covered with MS sheet 2mm thick & front side hinged with 4" hinges & locking system with heavy duty 12" sliding door.Placed on MS strip of size 12.5mmx2.5mm thick welded with MS sheet with 4no. legs of 50mmx50mmx6mm thick MS angle iron each of 600mm long with MS sheet 100mmx100mmx6mm thick at the bottom end of the legs.Front door welded x-actionally with MS flat 25mmx5mm.The front side with MS sheet each 75mm wide & a bend of 75mm width outwards & inwards on all sides with tappered top 200mm high.And pedestial with 4 Nos supporting members each of MS flat 50mmx6mm thick acc. to cubical size duly welded & complete pedestal to be painted with 1 coat of red oxide & 2 coats of paint &bonding to the existing earth to be erected in the 1:2:4 CC, the platform of 150mm high from ground level & 450mm thick & 150mm from the top of the CCplatform as per Drawing attached. A) Cubical Size 900mm high, 600mm wide and 350mm deep

Planting permanent hedge including digging of trenches 1.0 ft wide and 30 cm deep refilling the excavated earth mixed with manure supplied @ 4.65 cum per 100 mtr and supplying planting hedge plants at 30 cm apart

MADAN MOHAN

LALIT KUMAR CONTRACTOR