Special repair to bldg No P-166 and addn/alteration to bldg No. 29 in Bharatpur Lines at Mil Stn Dharamshala

Amount

Taking down chowkhats or frames not exc 1.50 sqm with shutters (without taking off shutters from the frames), complete all as specified and directed by Engr-in-Charge.

All as per Srl Item No 1.00 here-in-before, but exceeding 1.5 Sqm and n.exc 4 Sqm(without taking off shutters from the frames), complete all as specified and directed by Engr-in-Charge.

Taking down shutter and refixing in same opening of size exc 1.0 sqm and not exc 2.0 sqm, complete all as specified and as directed by Engineer-in-Charge.

S&F 35mm thick factory made plain framed panelled shutters of 2nd class hard wood two panel with lock rail and panel of 9mm thick BWP commercial ply, the size of rail and stile as per IS-1003 (Part-I) Kiln seasoned and chemically pressure treated factory made shutters wood is to be incorporated, complete all as specified and directed by Engr-in-Charge.

S&F pressed steel frame made out of MS sheet 1.25mm thick of size 105x 60 mm for doors/ windows with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc, complete all as specified and directed by Engr-in-Charge.

PCC (1:3:6) type C-1 using 20mm graded crushed stone aggregate as in back filling of chowkhat, complete all as specified and directed by Engr-in-Charge.

Steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and directed by Engr-in-Charge.

S & F figured glass pin head type 3 mm thick ordinary quality and glazing with oil putty not exc 0.5 Sqm in each pane, complete all as specified and directed by Engr-in-Charge.

S & F 250 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete.

S & F anodised aluminium barral tower bolt extruded section 200 mm size, complete all as specified and directed by Engr-in-Charge.

S & F anodised aluminium handle cast type 125 mm size, complete all as specified and directed by Engr-in-Charge.

S&F 300mm, ordinary rat tail rod pattern springs, including roller and roller plate complete, fixed in repairs, complete all as specified and directed by Engr-in-Charge.

Galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks, or galvanized wire staples, complete all as specified and directed by Engr-in-Charge.

Preparation of new or previously untreated Steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed by Engr-in-Charge.

M & L preparation of new wood or wood based surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint, complete all as specified and directed by Engr-in-Charge.

Taking down cement plaster on brick walls or stone walls any descrition etc including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed by Engr-in-Charge.

Rendering 10mm thick cement plaster on other than fair faces of brick work or concrete surfaces in cement mortar (1:6) finished even and fair without using extra cement, complete all as specified and directed by Engr-in-Charge.

Two coats of white wash on newly plastered surface of walls including preparation of surfaces, complete all as specified and directed by Engr-in-Charge.

25 mm thick cement concrete 1:2:4 Type B-0 as in floor finished even and rough to receive further floor finishes, complete all as specified and directed by Engr-in-Charge.

Glazed ceramic tiles coloured, (first quality), of size 300x450mm x7mm thick on vertical surfaces such as skirting dados and risers to walls etc, joint free/joint less, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces over and including 10 mm thick rendering in CM 1:3 incl taking down existing tiles, complete all as specified and directed by Engr-in-Charge.

Non skid edge cut ceramic coloured tiles 7mm to 8mm (square/rectangular) area each tiles exc. 0.11sqm but not exc. 0.18 sqm in floors etc & jointed in neat cement slurry and pointed in white cement and pigment over over 15mm thick screed bed in CM 1:4 including taking down existing tiles, complete all as specified and directed by Engr-in-Charge.

Supply & Fixed rotational moulded polyethiene water storage tanks (three layer) of capacity 500 litres, (cylindrical vertical with closed top) hoisted and fixed in position including 20mm ball Ball valves high pressure of PTMT with epoxy coated Aluminum rod & high-density plastic ball including S & F necessary GI fittings, inlet/outlet washout, overflow pieces long nipples, checknuts & washer etc complete including dismantling existing water tank, complete all as specified and directed by Engr-in-Charge.

Taking up or down steel water tubing and connections including cleaning for refixing or removal to store for bore of pipe 15mm bore dia, complete all as specified and directed by Engr-in-Charge.

ditto- as per ser item No 22.00 above but 20mm bore, complete all as specified and directed by Engr-in-Charge.

S&F in repair 15mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor, ceiling etc, complete all as specified and directed by Engr-in-Charge.

S&F in repair 20mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor, ceiling etc, complete all as specified and directed by Engr-in-Charge.

S&F in repair Angular Stop cock 15mm bore pipe ,CP cast copper alloy complete all as specified and directed by Engr-in-Charge.

Bib taps for 15 mm bore pipe, cast copper alloy chromium plated fixed in repairs, complete all as specified and directed by Engr-in-Charge.

Shower rose with arm for 15 mm bore pipe, cast copper alloy chromium plated fixed in repairs, complete all as specified and directed by Engr-in-Charge.

S&F PVC flushing cistern 10 ltr capacity incl PVC connection inlet and and outlet connections,brackets, PVC flush pipe with bend 32 mm dia of suitable length including making necessary connections to water supply pipe line and jointing to WC, complete all as specified and directed by Engr-in-Charge.

S&F in repair Vitreous china ware Orissa pattern white water closet of size 580x440mm with integral foot rest including PVC (SWR) 'P' trap front or back inlet and connection to pipes (excluding flushing cistern but incl flushing pipe 32mm dia) complete all as specified and directed by Engr-in-Charge.

PVC connections 15mm size with PTMT nuts of length 450mm, complete all as specified and directed by Engr-in-Charge.

Ball valve high pressure of PTMT with epoxy coated alum rod & high density plastic ball screwed for 20mm bore iron pipeminimum weight 20mm -210 gms) fixed in reapirs, complete all as specified and directed by Engr-in-Charge.

S & F in repairs Vitreous china wash basin, white flat back,size 550 x 400 mm including waste coupling , brackets and cutting for and pinning in ends of brackets or errecting stand and 32 mm dia waste pipe complete all as specified and directed by Engr-in-Charge.

Supply only pillar tap 15 mm bore chromium plated screwed down, high pressure screwed for iron pipe, complete all as specified and directed by Engr-in-Charge.

S & F concealed stop cock extra heavy duty with adjustable wall Flange size 15 mm bore chromium plated, complete all as specified and directed by Engr-in-Charge.

Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long all as spd and directed.

S&F Vitreous China urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) incl urinal spreader, complete all as specified and directed by Engr-in-Charge.

Soap dish any type fixed to plugs with chromium plated brass screws, complete all as specified and directed by Engr-in-Charge.

S&F in repair 20mm size gun metal globe or gate valves with iron wheel head, screwed both ends for iron pipe complete all as specified and directed by Engr-in-Charge.

S&F in repair 15mm size gun metal globe or gate valves with iron wheel head, screwed both ends for iron pipe complete all as specified and directed by Engr-in-Charge.

S&F 110mm dia PVC (SWR) bends any radius with oval access door in repair, complete all as specified and directed by Engr-in-Charge.

S&F 75mm dia PVC (SWR) bends any radius in repair, complete all as specified and directed by Engr-in-Charge.

S&F 75mm dia PVC (SWR) bends any radius with oval access door in repair, complete all as specified and directed by Engr-in-Charge.

S & F PVC (SWR) junction single, (Single T) equal or unequal 110 mm dia, complete all as specified and directed by Engr-in-Charge.

S & F PVC (SWR) junction single, (Single T) equal or unequal 75 mm dia, complete all as specified and directed by Engr-in-Charge.

S&F in repair 110 mm bore PVC (SWR) pipes single, socketed in any length with rubber ring joints fixed to walls incl dismantling existing pipes, complete all as specified and directed by Engr-in-Charge.

All as per Srl item 47.00 here-in-before, but 75mm bore, complete all as specified and directed by Engr-in-Charge.

S&F in repair 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and directed by Engr-in-Charge.

All as per Srl item 49.00 here-in-before, but 75mm bore, complete all as specified and directed by Engr-in-Charge.

S&F PVC (SWR) vent cowl for 75 mm dia, complete all as specified and directed by Engr-in-Charge.

S&F 75 mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement fixed in cement concrete 1:2:4 type B-1, complete all as specified and directed by Engr-in-Charge.

Cement concrete type C-1, 1:3:6 (using 20mm graded aggregate) as in plinth protection 75mm thick finished even and smooth without using extra cement, complete all as specified and directed by Engr-in-Charge.

Demolition of cement concrete (un-reinforced) in ground floor and paving not exc 15 cm thick (below or above ground level), complete all as specified and directed by Engr-in-Charge.

Demolitin of stone masonary in cement mortar including all quions ,arches,pillars etc but excluding ashlar facings dressed stonework and pre cast concrete articles, complete all as specified and directed by Engr-in-Charge.

Walling of squared rubble, regular coursed, well bonded, bedded and solidly hearted, built in CM 1:6, complete all as specified and directed by Engr-in-Charge.

Dismantling plain or corrugated steel sheeting, any gauge thickness, incl nainital or similar pattern roof covering, complete all as specified and directed by Engr-in-Charge.

S&F 0.63 mm thick Galvanised, corrugated mild steel sheeting with two corrugations side lap,fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 275, complete all as specified and directed by Engr-in-Charge.

S&F 0.63 mm thick Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275, complete all as specified and directed by Engr-in-Charge.

Dismantling timber scantlings 40.00 sqcm & over in section, in any position in framed work, complete all as specified and directed by Engr-in-Charge.

Second classs soft wood tilmber framed and fixed clean sawn as in scantling, complete all as specified and directed by Engr-in-Charge.

ditto as per item No 62.00 but except timber, complete all as specified and directed by Engr-in-Charge.

Taking down carefully copper/aluminum point wiring (light, fan, socket or power) complete with fittings and fixtures such as switches, ceiling roses, pendants, regulators, socket, lamp holders brackets, bulk head fittings, tube light fittings etc removing material to store for keeping in safe custody or for taking credit ( credit for above items should be made as per conditions separately ) and also making good disturbed surfaces of wall, floors etc, complete all as specified and as directed by the Engineer-in-Charge.

M&L for point wiring with 1.5 Sqmm copper conductor (Multi-stranded) PVC insulated and unsheating FRLS electric cable 1100 volts cable and including PVC casing and caping of suitable size (as per conductor run) with all fittings/ accessories and including PVC insulated electric cable 1100 volts 1.5 Sqmm ( multi-stranded) copper conductor single core( Green colour) cable as continuous earth wire connected to common earth dolly including sunk sheet steel terminal box made out of 1.6 mm thick MS sheet covered with 3 mm thick plastic laminated sheet ( Make Hylum) concealed in wall or on surface as per site requIrement and making good disturbed surfaces of wall for one light point/bell point/fan point/exhaust fan point etc controlled by one, one way switch, complete all as specified and as directed by the Engineer-in-Charge.

All as per serial item No 65.00 here-in-before , but for one socket outlet 15 Amps on independent board with 2.5 Sqmm copper conductor ( Multi-stranded) PVC insulated and unsheating electric cable 1100 volts (ISI Marked) including PVC insulated and unsheathed electric cable 1100 volts 2.5 Sqmm copper stranded conductor as continuous earth wire connected to common earth dolly, complete all as specified and as directed by Engineer-in-Charge.

M&L for socket outlet 2 in 1, 3 pin, 5 Amp and 15 Amp flush type, complete all as specified and as directed by Engineer-in-Charge.

M&L for Switch piano flush type single pole one way 15 Amp, complete all as specified and as directed by Engineer-in-Charge.

M&L for Switch piano flush button 5 Amps, complete all as specified and as directed by Engineer-in-Charge.

Material and labour for ceiling rose surface type, 65 mm x 50 mm two to three terminals / PVC / polycarbonate, isolated body fixed on PVC block, complete all specified and as directed by the Engineer-in-Charge.

Supply & Fix in replacement of existing unsrviceable Sheet metal enclosure for DB’s suitable for MCBs of single pole and neutral 08 way (Double door) with 200 amp 240 Volts rated bus bar, complete all as specified and as directed by Engineer-in-Charge. Note: i) Connections of MCB's shall be done with appropriate size of brass/Copper thimble. ii) The disturbed surface shall be match with existing surface.

Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and neutral, current carrying capacity 32 Amp complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 Amp complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing LED lights fitting 1x 18W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and as directed by Engineer-in-Charge.

M&L for lamp holder, PVC/ polycarbonate type with back plate, complete all as specified and directed by Engr-in-Charge.

Supply and fix LED LAMP 9 W BC 6500 K, complete all as specified and as directed by Engineer-in-Charge.

Earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6.3mm thick buried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of plate not less than 1.5 Metres below normal ground level, connecting to the Galvanised iron earth lead wire 4mm dia, by means of bolts, nuts, check nuts and washers of galvanised iron and 4mm earth lead protected by provision of GI medium grade pipe 15mm bore including provision of concrete pit in PCC (1:2:4) type B-1 using 20mm graded stone aggregates with 40mm thick cover of RCC (1:2:4) reinforced with XPM (weight not less than 4Kg/Sqm) and frame of angle iron 25x25x6mm with lugs 02 Nos and with 6mm dia MS bar handle made to shape, GI medium grade 20mm bore pipe for watering perforated at bottom 1.75 metre long placed on top edge of earth plate, common salt and charcoal filling, test point made out of 75x50x6mm phosphorous bronze with fixing arrangement, funnel, wire mesh and earth work in hard/dense soil, returning filling in and removal of surplus soil to a distance not exceeding 50 metres, all as per electrical plate No 3 of SSR-2009 Part-I and connecting to earth test point including testing on completion all as specified and directed by the Engineer-in-charge.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers, complete all as specified and as directed by Engineer-in-Charge.

Supply and fix electric water heater,storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc, complete all as specified and as directed by Engineer-in-Charge.

Rendering 15mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar (1:4) finished even and fair without using extra cement, complete all as specified and as directed by Engineer-in-Charge.

Preparation of new/old plastered surface of wall by applying 1.5 mm wall care putty in two layer and making the surface smooth with sand paper and applying two coat of OBD, complete all as specified and as directed by Engineer-in-Charge.

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new/old surfaces, complete all as specified and as directed by Engineer-in-Charge.

S & F 1.25 mm thick mild steel sheet eaves gutters, galvanised class 3, half round with rounded edges, complete all as specified and as directed by Engineer-in-Charge.

Taking down Shutters of any description exc 1 sqm but n.exc 2.0 sqm each, complete all as specified and as directed by Engineer-in-Charge.

M & L for 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed, complete all as specified and as directed by Engineer-in-Charge.

S&F 2nd class hard wood 30 mm thick glazed and skeleton shutters, open rebated and prepared to receive glass or gauge etc ( divided into squares with plain chamfered or rounded , mitred and rebated sash bars, any numbers), edges of framing plain chamfered or rounded fitted with cut and mitered beads and fitted to chowkats for securing glass/gauge size of stiles rails and other parts as per clause 8.20 (a) of SSR Part-I 2009 complete all as specified and as directed by Engineer-in-Charge.

3mm thick sheet glass ordinary quality and glazing with oil putty or fixed with bead/glazing pins in squares size n.exc 0.5 sqm in each pane, complete all as specified and as directed by Engineer-in-Charge.

S& F 150 mm Aluminium anodised, barrel tower bolts of extruded section complete all as specified and as directed by Engineer-in-Charge.

Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over 15 mm thick screed bed with CM 1:4 incl roughening of old concrete floor by picking, sweeping cleen and washing down with water to remove dust etc, complete all as specified and as directed by Engineer-in-Charge.

Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in vertical surface etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over 10 mm thick rendering with CM 1:4 incl taking down existing finishes, complete all as specified and as directed by Engineer-in-Charge.

Solid PVC door frame of size 50mmx47mm out of 5mm plain colour PVC sheet reinforced with M.S Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed by Engr-in-charge.

Factory made solid panel PVC door shutter 30 mm thick (stile) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, Panelling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the stiles & rails with suitalbe PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing on MES SSR Part-II 2020 complete all as specified and directed by Engr-in-charge.

All as per Srl Item No 93.00 here-in-before, but wire gauzed ie, Panel will be of wire guaze in lieu of PVC sheet panel. The wire guaze shall be wrapped on a additional square 8.00 mm MS solid tube and this tube shall be welded to MS tubes. The wire guaze shall be streched to tighten firmly complete all as specified and directed by Engr-in-Charge.

75mm butt hinges, medium weight, cold rolled mild steel, complete all as specified and directed by Engr-in- Charge.

Krithvik Electricals