CONSTRUCTION OF SELF SUPPORTING MAST AT SITE SEORINARAYAN, THETHETANGER, KESINGA, BOUDH, JAMADARPALI UNDER MD, CWC, BURLA

Amount

Site Clearance (for site Boudh and Jamadarpali )

Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead. ( for site Seorinarayan , Kesinga and Thetatanger)

Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m. All kind of soil.

Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Hard drawn steel wire.

20 mm cement plaster of mix : 1:6 (1 cement : 6 coarse sand)

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone addictives of required shade : New work ( Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior prime applied @ 2.20 kg/10 sqm).

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).

Errection mast over bolts to the satisfaction of Engineer in charge.

Providing and fixing sitting arrangement over top of mast and two set pulley on each mast at suitable height diggerence for fixing wireless antena to the satisfaction of Engineer in charge.