REPAIRS REPACEMENT OF FALSE CEILING DOOR WINDOWS AND OTHER MISC WORKS AT DALHOUSIE CANTT

Amount

Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) any thickness, including cover fillets as directed.

M&L cover fillets of hard board,40mm wide and fixing with screw 6mm thick etc

M&L preparation of new wood and wood based surfaces of any description n exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

4mm thick non asbestos fibre cement designer board ISI Marked fixed with screw to aluminium frame work in ceiling flat or sloppy as per manufacturer instructions

Ditto Srl item No. 4 except non asbestos building boards

S&F Anodised aluminium snap grid frame work for false ceiling for size of grid 605 x 605 mm including hangers 6 mm dia GI (up to 1200 mm long) adjusting level fixed to roof complete all as specified

Taking down chowkats or frames incl shutters (including takeing off shutters from frame) n exc 1.5 Sqm

All as per item No 7 above but exc 1.5 sqm but n exc 4 sqm each

Taking down shutters of any description n exc 1 Sqm each

All as per item No 9 above but exc 1 sq.m and n exc 2 sq.m each

M&L resecuring or easing and adjusting of shutter, without takig down shutter of any description exc 1.00 Sqm but n.exc 2.00 Sqm each shutter complete all as specified

S&f in repair galvanised steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with stainless steel wire staples

S&f galvanised steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with stainless steel wire staples

2nd class soft wood ( kail ) as in plain fillets, square rectangular or triangular in section fixed with screws exceeding 6 and nexc 13 sqcm wrought all as specified.

IInd class hard wood (Sal, Hollock) plain solid, straight, Chowkat and frames, wrought, framed, rebated on the solid , rounded or chamfered, put together with glue, pinned at joints all as specified

Flush shutters, 30 mm thickness solid core construction, with block board core and ply wood face panels, commercial type on both sides

S & F Factory Made llnd class softwood plain, framed, panelled shutters (any nunmber of pannels), with pannels of timber flat on both sides, (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers; supplied and fitted to chowkats, 30 mm thick battens{(Make : M/s Everest Trading Corpn, Damtal (H.P.), M/s Sarab Enterprises, Damtal (H.P.)}

IInd class hard wood glazed and skelton shutters 35mm thick Factory Made, open rebated and prepared to receive glass or gauze etc (divided into squares) and fitted to chowkats, edges of framing plain chamfered or rounded fitted with cut and mitred bead for securing glass as specified in SSR Part-I section 8.24 (a) supplied and fitted to chowkhats

IInd class hard wood glazed and skelton shutters 35mm thick Factory Made, open rebated and prepared to receive glass or gauze etc (without sash bar) and fitted to chowkats, edges of framing plain chamfered or rounded fitted with cut and mitred bead for securing glass,divided into squares with plain chamfered or rounded mitred and rebated sash bars with stiles and rails as specified in SSR Part-I section 8.24 (b) as in windows, ventilators.

100mm size butt hinges medium weight colled rolled mild steel (ISI Marked)

S/F 200 mm long aluminium anodised barrel tower bolt of extruded section and fixed

S/F 100 mm long aluminium anodised barrel tower bolt of extruded section and fixed

M&L150 mm size Aluminium handle, cast type, anodised and fixed.

All as per item No 25 above but 100 mm size

S/F 250 mm long aluminium alloy, anodised, sliding door bolt with hasp and stape ( bolt type ) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolt and sliding bolt of extruded section or cast aluminium alloy and fixed.

S & F 300mm, Mild steel ordinary rat rail rod pattern springs including roller and roller plate complete supply & fixed

3mm thick plain sheet glass ordinary quality and glazing with oil putty or beading etc in square not exceeding 0.5 sqm in each pane

S&F in repair 3mm thick plain sheet glass ordinary quality and glazing with oil putty or beading etc in square not exceeding 0.5 sqm in each pane

Two coat of synthetic enamel paint over a coat of pink primer on new wood or wooden surfaces of any description over 10cm in width or girth not otherwise described including preparation

All as per item No 29 above but one coat synthetic enamel paint on old wdn surfaces

Block boards, grade 2 quality 18/19mm thickness inerior grade, commercial type, fixed with screws to timber frame work

M&L 18/19mm thick, prelaminated block board extirior grade decorative type with decorative face veneer on both side as in copboard & shelves.

S&F 40mm dia dia cupboard knobs fixed with nut, screw and washer of brass polished.

S&F harp & stable safets type brass with wild steel hinge pin include bolt to hinge plate and fixed with screws, 75mm.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with mild steel square tube, supplying and fixing in opening complete.

S&F factory made solid panel PVC door shutters 30mm thick (style) consisting of frame made out of mild steel tubes for top and bottom rails, mild steel frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail; panelling of plain colour PVC sheet to be fitted in the mild steel frame welded / sealed to the stiles and rails with suitable PVC sheet beading, and joined together with solvent cement, supplying and fixing in the frame at site complete.

S & F anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing including extra for powder coating (minimum thickness of powder coating shall be 50 micron) etc complete all as specified.

S & F anodised aluminium door/window shutters silding track, aluminium section weighing not less than 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos of 150mm and two 150mm tower bolts in each door, hinges, anodised aluminum snap beading screws etc. including extra for powder coating (minimum thickness of podwer coating shall be 50micron) complete all as specified.

S & F 9mm prelaminated particle board, exterior grade,both side with decorative choice laminations & fixed to aluminium frame work.

M & L for 5.5mm sheet glass ordinary qualities and glazing with rubber beading all as specified.

S & F in repair double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed.

malghotra construction co

Havish Construction

Pathania Builders