Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹49.6 LAccepted-AOC | L1 | Accepted-AOC AOC AWARDED DUE TO L1 BIDDER | |
| 2 | L2₹51.7 L+₹46,994.08 (0.92%)Rejected-Finance | L2 | Rejected-Finance BIDDER REJECTED DUE TO HIGHER BID VALUE | |
| 3 | L3₹53.0 L+₹1.8 L (3.57%)Rejected-Finance | L3 | Rejected-Finance BIDDER REJECTED DUE TO HIGHER BID VALUE | |
| 4 | L4₹53.7 L+₹2.5 L (4.96%)Rejected-Finance | L4 | Rejected-Finance BIDDER REJECTED DUE TO HIGHER BID VALUE | |
| 5 | L5₹54.2 L+₹3.0 L (5.94%)Rejected-Finance PO PS RUPA DIST WEST KAMENG ARUNACHAL PRADESH PIN 790 003 | WEST KAMENG | ARUNACHAL PRADESH | 790003 | L5 | Rejected-Finance BIDDER REJECTED DUE TO HIGHER BID VALUE |
Tender Value
₹48.5 L
EMD Value
₹97,000
Closing Date
16 Dec 2022, 2:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
LT COL BIRENDRA SINGH
GE 859 EWS
SPECIAL REPAIRS TO PUMP HOUSE, WASHROOMS AND ROOF TREATMENT ALONGWITH PROVN OF CERTAIN MINOR AND REVENUE WORKS OF AGE B/R II AND AGE E/M UNDER GE 859 EWS
2022_MES_565367_1
8368/E8
Open Tender
Civil Works
Item Rate
180 days
RUPA
PL REFER TENDER DOCUMENTS
7 documents required · 7 mandatory
₹500
Yes
GE 859 EWS
₹97,000
Yes
26 Apr 2023
25 Nov 2022
17 Dec 2022
25 Nov 2022
16 Dec 2022
9 Dec 2022
Amount
Surface excavation not exc 30 cm deep and averaging 15 cm deep and getting out in hard /dense soil
Excavation in trenches n,exc 1.5 m wide and n.exc 1.5 m deep for foundation and getting out in hard/dense soil.
All as per Srl item No. 2 above but depth exceeding 1.5 m and not exceeding 3 m complete all as specified and directed.
Returning/filling in including spreading, levelling, watering and well remming in layers n.exc 25 cm in hard/dense soil.
Removing excavated material n.exc 50m and depositing where directed at a level n exc 1.5m above the starting point.
Demoloition of cement concrete of any description and in any situation not otherwise specifically provided for
Demolition of cement concrete in floors n.exc 15 cm thick in ground floor (below or ground level all as specified
M & L 75mm thick cement concrete type C2 (1:3:6) using (40mmgraded aggr.) as in sub base
M&L for 50mm thick Cement concrete 1:2:4 type B-2 using 20mm grade stone aggregate laid on roof incl rendering 15mm thick in CM 1:4 with WPC @3% of cement weight on concrete surfaces finished even and smooth with neeru finish using extra cement complete all as specified and directed. Note :- WPC measured and paid separatly)
M&L for 100mm thick Cement concrete 1:2:4 type B-2 using 20mm grade stone aggregate laid on floor, finishing cemnet concrete surface even and smooth with using extra cement complete all as specified and directed.
M&L for cement concrete type B-0, 1:2:4 (12.5 mm graded agg)Avg thick 25mm in leveling course
M&L Formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter
M&L for PCC 1:4:8 type D2 using 40 mm graded stone aggregate in walls or retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts (including caps and bases)
M&L for Chequered cement concrete tiles 200x200x25mm etc. set and jointed and pointed in neat cement slurry in floor with grey cement and pigment all as directed.
M&L for 75 mm thick plain cement concrete type C-1, 1:3:6, (40mm graded stone aggregate)as in plinth protection and sub base of floors , finishing the top surfaces even and smooth W/O using extra cement.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing).
Material and labour for 20mm thick screed bed in cement mortar (1:6) for laying floor finish all as specified and directed
M&L 7 to 8mm thick( area of each tile exc. 0.11 sqm but not exc. 0.18 sqm) non skid colour ceramic tiles in floor etc. set and jointed in neat cement slurry and pointed in white cement to match the shade.
M&L rendering 10mm thick on other than fair faces of brick work or concrete surface in CM 1:4 for fixing of wall tiles.
M & L for glazed coloured ceramic tiles (300x200x7mm thick ) on vertical surface such as skirting, dados, risers etc. set and jointed in neat cement slurry and pointed in coloured cement or pigment to match colour tiles.
M & L for glazed coloured ceramic tiles 450x300x7mm on vertical surface such as skirting, dados, risers etc. set and jointed in neat cement slurry and pointed in coloured cement or pigment to match colour tiles.
Taking down cement plaster on stone , brick, concrete block wall or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc.
M&L rendering 15mm thick in CM 1:6 on concrete surfaces finished even and smooth without using extra cement .
M&L rendering 15mm thick in CM 1:4 on concrete surfaces finished even and smooth with neeru finish using extra cement .
M & L 10 mm thick rendering on cement mortar 1:6 on brick or concrete surfaces finished even & smooth without using extra cement in walls
M & L for 15mm thick rendering in cement mortar 1:6 on brick or concrete surfaces with WPC @ 3% by weight of cement finishing the surfaces even & fair.(WPC will be measured and paid separately)
Supply only Integrated water proofing compound
Preparing new plastered surfaces and applying Two coats of cement base paint on surfaces of walls over one coat of white wash all as specified and directed.
Material and labour for preparation of newly plastered surfaces of walls and applying two coats of distemper oil emulsion over a coat of alkali resistant primer including chalk whitening etc all as specified.
M&L for prepraration of new or previously untreated surfaces of steel and applying two coats of synthetic enamel paint over a coat of redoxide primer.
M&L for preparing and applying one coat of synthetic enamel paint over old steel surface of any description, not otherwise described, over 10 cm width or girth.
Preparing newly plastered surfaces of walls and applying three coats of white wash.
Material and labour for washing rubbing down and stopping of walls and applying two coats of white wash.
M&LPreparation of old white wash surfaces of ceiling and applying two coat of whitewash on ceiling complete all as specified and directed.
Material and labour for washing rubbing down and stopping of distempered and painted surfaces applying two coat of oil bound distemper on wall all as specified and directed.
Dismantling of water tanks exc 250 Ltrs & n.exc 500Ltrs capacity and removing to store
Dismantling of water tanks exc 500 Ltrs & n.exc 1000Ltrs capacity and removing to store
Supply and fix polythene water storage tank of 500 ltrs capacity rotational moulded (multilayered, cylindrical, vertical with closed top) hoisted and fixed in position all as specified
Supply and fix polythene water storage tank of 1000 ltrs capacity rotational moulded (multilayered, cylindrical, vertical with closed top) hoisted and fixed in position all as specified
Supply and fix ball brass valves high pressure with polythene float and fly nut complete screwed for iron pipe of 20mm dia all as specified and directed.
Demolition of CI/AC/PVC pipes 100mm dia
S&F PVC (SWR) pipes single sockted 110mm dia in any length with rubber ring joints fixed to walls
M&L for cement concrete type B-1, 1:2:4 (20 mm graded agg) , in roof kerbs or mud stops, rounded or chamfered on edges
M&L for PCC 1:4:8 type D2 using 40mm graded agg as in fdn filling and mass concrete.
Taking up or down 20 mm bore steel tubing and connections.
S & F 20 mm bore Galvanized Steel tubes, medium grade with all fittings for water supply pipes fixed to walls or laid in trenches .
S&F PVC (SWR) bends any radius , 110mm dia.
Taking down 15mm bore GI tubing and connections complete all as specified and directed.
S & F 15 mm bore Galvanized Steel tubes, medium grade with all fittings for water supply pipes fixed to walls .
S&F bib taps, chromium plated brass,fancy type with capstan head, screwed down, screwed for iron pipe of 15 mm bore all as specified and directed
S&F 15 mm dia angle valve chromium plated cast coper alloy fancy type screwed down high pressure with capstan head screwed both ends for iron pipe or for union complete
S&F vitreous china wash hand basin white flat back of size 550mmx400 mm including brackets complete all as specified and directed
S&F as in pillar tap cast copper alloy of 15mm size with capstan head chromium plated fancy type screwed down high pressure.
S&F waste coupling PTMT 32mm (half or full threaded) min weight 60gms
S & F PVC connecting pipe 450 mm long
S&F for 20mm stop valve, cast copper alloy, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed.
S&F for 20mm stop valve, cast copper alloy, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed.
S&F in hand shower (health faucet) with 1 meter long easy flex tube in Chrome Finish and wall hook screwed down for 15mm bore iron pipe complete all as specified and directed
S&F LDPE pipes of pressure rating 6kgf/sq.cm 40mm bore
Taking down Chowkats or frames not exceeding 1.5 Sqm each (Without taking off shutters from the frames)
Taking down Chowkats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each (Without taking off shutters from the frame)
M&L 2nd class hard wood plain solid straight chowkats and frame wrought framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.
S & F 2nd class hard wood plain framed panelled shutter 30mm thick (any number of panels) with panels of timber flat on both sides, feather edged or of veneered particle board medium density, wood particle board with commercial face veneer 30mm thick
M&L for Glazed and skeletion shutters 30mm thick 2nd class H/W open rebated and prepared to receive glass, gauze tec (without sash bars) edges of framing plain chaqmfered or rounded fitted with cut and mitred beads for securing glass tec sizes of members of shutters as specified in SSR Part I Section 8 clause 8.20 (a) supplied and fitted to chowkats.
Supply and fix 100mm long MS butt hinge medium weight cold rolled.
Supply and fix 75mm long MS butt hinge medium weight cold rolled.
Supply and fix aluminium anodized barrel tower bolt 150mm long extruded section.
Supply and fix aluminium anodized barrel tower bolt 100mm long extruded section.
Supply and fix 75mm size aluminium anodized handle fabricated type
Supply and fix 125mm size aluminium anodized handle fabricated type
Supply and fix 150 mm size aluminium anodized handle fabricated type
Supply and fix 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy.
S&F 3mm thick sheet glass ordinary quality and glazing with oil putty or wooden beading in squares not exceeding 0.5 Sq. M in each pane.
Supply and Fixing 3 mm thick figured glass, pin head glazing with oil putty in squares n exc 0.50 Sqm in each pane.(Make: Trivani/Modi Float/Gold Fish)
S&F MS window guard bars, window frames,Lor T section supports for shelves etc and similar articles confirming to Fe 290-0 or E-165.
S&F Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples
M&L for preparation of new wooden surfaces of any description, not other wise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer.
M&L mild steel work as in gate framed work of angle or other section with gusset plates braces etc complete
Dimolition of brick and stone masonry of any description in CM
M&L for walling of RR, uncoarsed, well bonded bedded & solidly hearted built in cement mortar 1:6
M&l Extra over stone walling for hammer dressing to face stones & dressing to face beds and joints as specified at RR walling uncoarsed or brought upto coarse, max depression on face from straight edge held against the dressed surface n.exc 20 mm granite or trap stone.
M&L for raised pointing to RR, uncoarsed or brought upto course stone masonry in cement mortar 1:3
Providing pre cast PCC blocks (for stone walling), type B1 1:2:4 (20 mm graded aggregate) set in cement mortar 1:6
M&L for Hand packing(any thk)at back filling with broken stone or boulders.
M&L for providing cement concrete in coping type B1 1:2:4 (20 mm graded stone aggregate) in coping
Dismatling of mild steel work any description
M&L for plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment
S & F repairs Vitreous China wash down closet pan (pedestal pattern) white , etc complete
S&F PVC vaveless, syphonic action type 10 ltr flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets
M&L for PCC 1:3:6 type C2 block masonry with solid blocks, exc 10cm in width and setting in cement mortar 1:4 including demolition of precast block walling built in cement mortor complete
Dismentling plain or corrugated steel sheeting of any thickness as in roof and wall covering
S&F 0.63 mm thick galvanised, corrugated mild steel sheeting with two corrugation side lap, fixed with L-type or J-type or cranked hook bolts in lieu of screws and washers, in roofs, walls etc. with grade of zinc coating 275 gsm.
M&L for preparing and applying two coat of synthetic enamel paint over a priming coat on new zinc (or galvanised ) surfaces to receive painting, by coating with mordant solution including washing and cleaning etc. of any description, not otherwise described, over 10 cm width or girth.
Disantiling timber scantlings 40 sq.cm and over in section, in any position
M & L for second class hard wood in scantling cleane sawn.
Material and labour for 15mm thick screed bed in cement mortar (1:6) for laying floor finish all as specified and directed
Material and labour for taking down of existing tarfelt and bituminous compounds in roof of any description from roof or terracing, roughening surfaces of old concrete surface by picking u,sweeping clean and washing down with water to remove dust etc providing 15mm thick screed bed or bed or bedding layer of cement mortar (1:4) for laying waterproofing membrane and finishing surface even and smooth without using extra cement and providing waterproofing treatment over smooth finished surfaces after applying one coat of cold bituminous primer at 0.30 ltrs / Sqm ,hot bitumen 85/25 @ 1.2 kgs /Sqm providing laying APP polymer, modified , non-woven polyster mat,reinforced membrane, 3mm thick (min) weighing 3.50 Kg/Sqm with surface finish of white mineral ,by torch application method , with minimum 75mm overlap on longitudinal direction and 100 mm overlap on the transverse direction and finally applying one coat of bituminous based solar reflective aluminium paint @ 100Gms /Sqm over APP modified membrane all as specified and directed.
S&F CP toilet paper holder. Make:- Jaquar Cat Part No :- AKP-CHR-35751P, and equivalent
S&F Corner GLASS shelf with brackets. Make:- Jaquar Cat Part No :- ACN-CHR-1173,and equivalent
S&F CP towel Rail 600mm long "D" type. Make:- Jaquar Cat Part No :- AKP-CHR-35711PS, and equivalent
S&F CP towel ring. Make:- Jaquar Cat Part No :- AKP-CHR-35721P, and equivalent
S&F CP soap dish. Make:- Jaquar Cat Part No :- AKP-CHR-35731P, and equivalent
S&F Looking Mirror of size 630x445 mm. Make:- Jaquar Cat Part No :- AKP-CHR-35795, and equivalent
S & F chromium plated 15mm dia stop cock single way Make:- Jaquar, Cat Part No :- FUS-CHR-29053, or equivalent.
S&F CP single lever Basin mixer. Make:- Jaquar, Cat Part No :- FUS-CHR-29005NB, and equivalent
S&F CP health foucet with 1.00m flexible tube and wall hook. Make:- Jaquar Cat Part No :- ALD-565, and equivalent
S&F Vitreous china Single piece WC white colour. Make - Jaquar, Cat Par No - ONS-WHT-10853S300UFSM, and equivalent
S&F vitreous china urinal half stall type white complete including providing and fixing plugs,etc all fittings (excluding flush cistern) complete all as specified and directed.
S&F vitreous china urinal half stall type Make:- Jaquar Cat Part No: URS-WHT-13255 including sencer for flushing valve of Urinal Make:- Jaquar Cat Part No: SNR-CHR-51097 complete including providing and fixing plugs,etc all fittings complete all as specified and directed and equivalent
M& L for Vitreous China squatting plate urinal white (excluding flushing cistern, flush pipe and waste pipe)
S & F repairs Vitreous China squatting pan, "Orissa" pattern, size 580 x440 mm white, with integral foot rests 'P' trap complet all as specified and directed. (excluding flusing cistern and flush pipe)
S&F 75mm dia PVC (SWR) multi floor trap with grating including jointing with solvent cement including fixing waste pipe etc complete all as specified and directed.
S&F solid pvc door frame of size 50mmx47mm made out of 5mm plain colour pvc sheet reinforced with MS square tube, supplying & fixing in opening as per specification & drawing complete.
S&F 30mm thick solid panel PVC door shutter consisting of frames made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour C channel having a PVC strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as the gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading, and jointed together with solvent cement, supply and fixing in the frame in the site as per specification and drawing.
Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width tuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of lain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.
S&F PVC (SWR) pipes160 mm bore single socketed, in any length with rubber ring joints, laid in trenches, wall or in floors.
S&F in 32mm bore PVC wast pipe for WHB
S&F PVC (SWR) pipes 75mm dia single sockted in any length with rubber ring joints fixed to walls.
S&F PVC (SWR) vent cowl 75 mm dia.
S&F Bottle trap of PTMT having minimum water seal of 25mm .(Minimum weight 32mm-260gms/ 40mm-270 gms)
S&F PVC connection of 15 mm size with PTMT nuts of length 450 mm
S&F Grating doom 125 mm dia with with waste hole of PTMT (mminium weight 40 gms)
M&L for 75 mm thick PCC 1:4:8 type D2 (using 40 mm graded stone aggregate) in sub base floorings.
M&L hard core of gauge n.exc 63mm, deposited, spread and levelled in layers nexc 15 cm thick, watered and rammed to a true surface.
M&L for 75 mm thick plain cement concrete type C-1, 1:3:6, (40mm graded stone aggregate)as in plinth protection, finishing the top surfaces even and smooth W/O using extra cement.
M&L for PCC 1:2:4 type B-1 using 20mm graded stone aggregates as in bed block.
S&F Mild steel flat iron as in hold fasts; complete all as specified.
Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified
M& L Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing types complete all as specifird and directed.
Mild steel TMT bars 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips.
M&L for providing precast reinforced cement concrete 1:2:4 type B1 using 20 m graded stone aggregate as in landings, staircase slab, cover slabs(for men holes etc) chullah hoods,chhajjas water troughs mangers,shelves and similar articles with plain faces.
M&L for providing formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) fair finished surface.
S&F Gun metal 20mm bore globe or gate valves, with irn wheel head, screwed both ends for iron pipe and fixed.
S&F Gun metal 15mm bore globe or gate valves, with irn wheel head, screwed both ends for iron pipe and fixed.
Taking down copper/aluminium point wiring (light, Bell, fan, socket or power) complete and removing material to store for keeping in safe custody or for taking credit and making good the disturbed surfaces of wall /ceiling so as to match with the existing finishes complete all as specified and as directed.
M&L for Point wiring One light /Fan point controlled by one switch 6/5 Amp with PVC insulated and unsheathed multistranded FRLS copper conductor single core 1.5 Sqmm (nominal area) cable using approved colour code as per IS drawing in and incl PVC casing and capping (ISI Mark) with all accessories including providing PVC board heavy duty incl providing plastic laminated bakelite sheet top coveralongwith copper earth wire PVC insulated & unsheathed multistranded(FRLS) copper conductor cable of size 1.5 Sqmm as continous earth wire connected to common earth and earth dolly complete all as specified. Make of Cable :- Havells/Polycab/Anchor/Finolex
One 3 pin socket outlet 6/5 Amps controlled by one switch on the same board with other switches.
One 3 pin 6/5 Amp socket outlet controlled by one switch indep board.
M&L Point wiring of Power point contolled by one 15 Amp switch independent with PVC insulated and unsheathed multistranded FRLS copper conductor single core 4.0 Sqmm (nominal area) cable using approved colour code as per IS drawing in and incl PVC casing and capping(ISI Mark) with all accessories including providing PVC board heavy duty incl providing plastic laminated bakelite sheet top cover alongwith copper earth wire PVC insulated & unsheathed multistranded(FRLS) copper conductor cable of size 4.0 Sqmm as continous earth wire connected to common earth and erth dolly complete all as specified and as directed. Make of Cable :- Havells/Polycab/Anchor/Finolex
S&F switch piano flush type (ISI marked), single pole, one way 5 Amp, 240 Volts including taking down unserviceable one complete all as specified & directed. Make : Anchor/Havells (Reo)/Kinjal/Kay
S&F switch socket combination 2 in 1, 3 pin, 6 Amp piano flush type (ISI marked), 240 Volts including taking down unserviceable one complete all as specified & directed. Make : Anchor/Havells (Reo)/Kinjal/Kay
S&F switch socket combination 2 in 1, 3 pin, 16/15 Amp piano flush type (ISI marked), 240 Volts including taking down unserviceable one complete all as specified & directed. Make : Anchor/Havells (Reo)/Kinjal/Kay
S&F for switch socket combination multiporpose 5 and 15 A flush type, 5 in 1, 240 volts all as specified and directed.
S&F ceiling rose, surface bakelite, 65mm x 50mm , two to three terminals including taking down unserviceable one complete all as specified & directed. Make : Anchor/Havells /Kinjal/Kay
S&F lamp holder insulated body with back plate suitable for batten fittings including taking down unserviceable one complete all as specified & directed. Make : Anchor/Havells /Kinjal/Kay
S&F LED lamp 15 watt, CDL, B-22 cap, (Pin type), 230V, PF not less than 0.85 (min) including taking down unserviceable one complete all as specified and directed . Make - CG/Havells/Philips/Bajaj
S&F Wall mounted Mirror light LED fitting, 10/11/14 Watt, 2 Feet long incl integrated electronic driver complete all as specified and directed. Make : CG/Philips/Bajaj/Havells
S&F Regal Batten for LED Tube, universal batten for G 13, T8 lamps complete with all accssories internally pre wired and incl connecting up to ceiling rose with 0.5 sqmm twin core copper flexible conductor cable including Photon Ultra Plus LED Tubelight 20 Watt (Single Side Connection) Ultra bright LED polycarbonate Tubelight with 10% THD with very high efficiency suitable for intalltion in T8 Tubelinght with G 13 lamp holders to give glare free light with integrated electronic driver and mounting casing box 2 Nos including taking down unserviceable one complete all as specified and directed. Make: Crompton Greaves Cat Part No IGP161LT-8-16 & LTT8-20 or equivalent in Phillips/Bajaj/Havells
Supply and fix electric operated storage water heater (Geyser) steel body vertical type with copper inner tank and heating element upto 2KW capacity 25 Litre, BEE 5 star rated suitable for operation on AC 230 volts having facility for inlet and outlet water supply connection, indication lamp Red and green with auto cut off system including installation in position with necessary fixing clamp, studs, nut, bolts and washers and grouting in walls and cement work compite and making necessary arrangement for inlet/outlet water supply connection for cold/hot water and texting complete all as directed. Make:Crompton or equivalent in Havells/ Bajaj/V-Guard
S&F MCB SPN 40 Amp 240 Volts complete all as specified and directed. Make: Havells/ L&T/ Anchor/ Schneider.
S&F sheet metal enclusure for DBs when MCBs to be used single pole and neutral 2 way , 240 volts fixed sunk / flush to the wall or in niche complete all as specified and directed.
Supply and laying sub main wiring two single core 6 sq mm stranded copper conductorof red & Black colour including 4 sq mm green colour stranded copper conductor as earth continuity conductor connected to common earth dolly including PVC casing n caping of suitable size for accomadating the wires Complete
Supplying & Fixing of flexible PVC pipe connection, nylon thread reinforced 15 mm dia, 450 mm long with brass union at both ends for 15 mm dia pipe complete all as specified and as directed
M&L PCC (1:3:6) type C-2 using 40mm graded crushed stone aggregate as in foundation for filling and mass concrete including necessary form work complete all as specified and as directed.
M&L PCC (1:2:4) type B-1 using 20mm graded crushed stone aggregate as in coping etc including necessary form work complete all as specified and as directed.
M&L for steel tubular swaged pole complete with cast iron base plate , finial taper plug bolts nuts and screws confirming to IS : 2713 and made out of structural steel tube confirming to IS: 1161 and painted internally with a coat of bituminous paint and externally one primer coat, one under coat and one finishing coat of aluminium paint as specified type 410 SP-31 (9 mtr long). Make - National Tubing Company / Kwality Steel Kolkata / Calcutta Poles / Bansal Poles / Jindal Poles
Supply and fixing security light Bracket made out of galvanised steel light grade pipe of 40mm dia 1.5 mtr long bend to an angle of 120 degree with 02 Nos clamp made out of 50mm x 5mm flat iron and 06 sets of nuts, bolts and washers painting with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
Supply and fixing LED street light fitting 90 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete.
Supply and fixing street light junction box of suitable size for three phase cable connection outdoor type, weather proof, factory made out of PVC sheet 1.8mm thick with front side hinged opening having locking arrangement with nuts & bolts & arrangement for incoming and out going cable/wire complete comprising with the followings :- (a) Bus bar with four aluminium strips, 100 Amps capacity insulated with insulators, including colour coding strip, including PVC cable of suitable size from bus bar to MCB (b) MCB SPN 5 to 30 Amps - 01 No (c) Clamps made out of 40mm x 5mm flat iron duly welded with nuts & bolts complete all as specified and directed. Make : Sintex/Hansel/Hager
S&F 1100 volts grade heavy duty flat twin core cable PVC insulated with stranded aluminium conductor of size 16 sqmm and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension GI wire from pole to pole complete all as specified and directed.
Supply, laying, fixing or passing through pole from junction box to street light connection, 1100 volts grade heavy duty cable with PVC solid insulated aluminium conductor served with an inner sheathing PVC tape and over all PVC sheathed 4 Sqmm 2 core nom.
Supply, laying, fixing or passing through panel to junction box connection, 1100 volts grade heavy duty cable with PVC solid insulated aluminium conductor served with an inner sheathing PVC tape and over all PVC sheathed 4 Sqmm 2 corenominal cross section complete all as specified and directed.
S&F MCB DB CRCA sheet powder coated SPN 4 way double door factory made suitable for incorporating MCB as out going connecting incoming and outgoing cables complete all as specified and as directed. Make : Havells/L&T/ABB/Schneider/Legrand
S&F MCB SPN having braking capacity 10 KA. 35 to 60 Amp, 240 volts C curve complete all as specified and as directed. Make : Havells/L&T/ABB/Schneider/Legrand
S&F MCB single pole having braking capacity 10 KA, 6 to 32 Amps 240 volts complete all as specified and as directed. Make : Havells/L&T/ABB/Schneider/Legrand
S&F 1100 volts grade heavy duty flat twin core cable PVC insulated with stranded aluminium conductor of size 10 sqmm and overall PVC sheathed in service connections incl pipe protection as per site requirement complete all as specified and directed.
S&F Exhaust fan of size 250mm sweep, plastic body with louver single phase suitable for 230 volts 50 Hz and connecting up complete including provision of 3 core flexible cord cable of size 27/0.183 from ceiling rose to connector of fan complete cutting of holes and fixing arrangement on wall all as specified and as directed. Make : Havells/CG/Bajaj/GEC
Earthing complete with galvanised steel earth electrode plate of size 600x600x6mm thick, buried directly in ground (earth pit nbot less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.50m below notmal ground level, connected to galvanised earth lead wire 4.0mm dia by means of suitable GI nuts/bolts and brazed properly up to main board including earth pit in cement concrete 1:2:4 type B-1, precast RCC cover in 1:2:4 reinforced with expanded metal, with suitable handle, excavation and earth work in any type of soil and including medium grade GI watering pipe 25mm bore with funnel wire mesh and medium grade GI wire protection pipe 25mm bore up to main board complete as shown in electrical plate No 3 of MES schedule Part-I 2009, connected to earthing testing point including taking out existing unsv earthing complete all as specified and testing on completion complete all as specified and as directed. Note:- The units rate including the cost of excavation & earth work in any type of soil, charcoal & salt in alternate layers, 25mm GI pipe (light grade) for watering 25mm GI protection pipe (light grade) funnel wire mesh PCC chamber in PCC 1:3:6 type C-1 cast iron frame and 40mm thick RCC cover for pit etc & no extra payment will be made.
M/S LARZAWANGPU AGENCIES
M/S ASHOK CONSTRUCTION
D.P. Traders
M/S R D TRADERS
M/S SM ANSARI
M/S YOGENDRA CONSTRUCTION CO
M/S SUNRISE CONSTRUCTION AND CO
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .