GE/CHM-75/2023-2024 ADDN/ALTN TO PVC BOARDS, KITCHEN CABINET AND BEDROOM CUPBOARDS IN MAP QTR AND SHED IN FRONT OF COOK HOUSE AT CHANDIMANDIR

Amount

Taking down cement plaster from brick walls or concrete surfaces including raking out joints, hacking out for key, scrubbing down with water complete all as specified and directed and removing rubbish etc. complete all as specified and directed.

Glazed ceramic tiles in vertical surface 300mm x 450mm x 7mm thick, joint free, first quality, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over and including 10mm thick rendering in cement mortar 1:4 , complete all as specified and directed.

Taking down shutters of any description exc 1 Sqm but not exc 2 Sqm each, and removal from site complete all as specified & directed.

Taking down chowkhats or frame exc 1.5 Sqm but n.exc 4 Sqm with shutter (without taking off shutters from the frame) and removal from site complete all as specified & directed.

Solid PVC frame (Single Rebated) of size 60mm x 30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and as shown on drawing (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life)

Solid PVC board 16-18mm thick, interior grade white colour, fixed with screws as in kitchen cupboard, shutter, wrap free , impact resistant, fire resistant and smell free complete, all as specified and directed.

Solid PVC board 22-25mm thick, interior grade white colour, fixed with screws as in shelves, wrap free , impact resistant, fire resistant and smell free complete, all as specified and directed.

Continuous (piano) hinges, mild steel bright finish, width of flap 40mm, complete all as specified and directed.

PVC body magnetic shutter catcher for kitchen cup boards, fixed with standard steel screws, complete all as specified and directed.

Extruded aluminium alloy handles, fabricated type, 150mm long , all as specified.

150mm long Aluminium anodised, barrel tower bolts of extruded section and fixed, all as specified and directed.

40mm dia cupboard brass knob fixed with nut screw and washer fixed in any position, complete all as specified and directed.

75mm hasp and staple, aluminium anodised, wire type, including bolt to hinge plate and fixed with screws, complete all as specified and directed.

25mm dia stainless steel curtain rod including fixing fancy types brackets, stops, rollers etc., complete all as specified and directed.

Rendering 15mm thick in Cement and Sand mortar 1:4 over fair faces of brick / concrete ,finished even and smooth without using extra cement, complete all as specified and directed.

Preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over and including a coat of primer complete all as specified and directed.

Excavation in post holes (or similar hole) each in hard & dense soil n.exc 0.50 cu m getting out, returning, filling and ramming earth or broken rubble mixed with earth around, in layers not exc 25 cm, for soil hard and dense complete all as specified and directed.

Plain cement concrete 1:3:6 type C-2 using 40mm graded crushed stone aggregate as in foundation, filling and mass concrete complete all as specified & directed.

Plain cement concrete 1:4:8 type D-2 using 40mm graded crushed stone aggregate as in foundation, sub base and mass concrete complete all as specified & directed.

Steel work in tubular trusses and tubular posts including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 , complete all as specified & directed by Engineer-in-Charge.

Pre-painted galvalume aluminum zinc coating (AZ-70) GI based corrugated steel sheet 0.50mm thick in any colour and patteren as approved by the GE of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws, i complete all as specified and directed.

Pre-painted galvalume aluminum zinc coating (AZ-70) GI based plain steel sheet 0.50mm thick in any colour and patteren as approved by the GE of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws, i complete all as specified and directed.

Preparation of new or previously untreated steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint over a coat of red oxide, complete all as specified and directed.

Machine cut kota stone slab on flooring etc, 18-20mm thick , best quality, width and length as ordered over and including 15mm thick screed bed in cement mortar( 1:4), bedded and jointed with grey cement slurry and pointed with grout of matching shade including moulding and all necessary cutting and machine polishing, complete all as specified and directed.

Removal excavated soil to a distance exc 250 but n.exc 500m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified & directed by Engineer-in-Charge.

Surface excavation not exceeding 30 cm deep and averaging 20 cm deep and getting out in hard/dense soil, complete all as specified and directed.

Hard core of broken stone or boulders of gauge n.exc. 63mm, deposited, spread and leveled in layers n.exc. 15cm thick, watered and rammed to a true surface complete all as specified & directed.

aggarwal contractors and engineers

Satyadev Builders

m/s AR Construction co

Gunjan and Gunjan Associates

Standard Const. Co.

VIJAY KUMAR GUPTA