COMPREHENSIVE MAINT OF B/R AND E/M WORKS TO OTM ACCN IN TECHNICAL AREA AT AF STN PALAM UNDER GE (AF) PALAM, DELHI CANTT - 10

Taking down cement plaster on brick, stone or concrete surfaces of walls etc incl racking out joints hacking for key scrubbing down with water etc and removing the debris from site to out site MoD Land complete all as specified and directed by Engr-in-Charge .

M&L for 10mm thick rendering of Ready Mix Mortar of approved make on brick work or concrete surfaces on internal walls, finished the surface even and smooth without using extra cement as on wall as whole or in patch etc complete all as specified and as directed. Make- Birla (HIL) or its equilent.

M&L for 15mm thick rendering of Ready Mix Mortar of approved make on brick work or concrete surfaces on external walls, finished the surface even and fair without using extra cement by using Dr. fixit (WPC) @ 3% of wt of cement content complete all as specified and as directed. Note:- Water proofing Compound shall be measured and paid seprately.

M&L for 5mm thick cement plater of Ready Mix Mortar of approved make as on ceiling & plastering to be finished even & smooth without using extra cement complete all as specified and as directed. Make- Birla (HIL) or its equilent.

Supply only Integral water proofing compound complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of alkalic resistent primer complete all as specified and as directed

M&L for applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/ltr and UV resistance as per IS 15489-2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon additives @1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.9 litre /10 sqm over new surfaces complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of ceiling and applying two coats of oil bound distemper over a coat of alkalic resistent primer complete all as specified and as directed.

M&L for washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster (1:4) (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings complete all as specified and as directed. Note:- Payment for providing grooves shall be measured and paid separately.

M&L for forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications complete all as specified and as directed.

Demolition of cement concrete (un reinforced) in ground floors and pavings n. exc 15 cm thickness (below or above ground level) and removing the debris from site to out site MoD Land complete all as specified and as directed.

M & L for 75mm thick cement concrete (1:3:6) type C2 (using 40mm graded stone aggregate) as in plinth protection, finished even and smooth without using extra cement, including making joints 12 mm wide to the full depth of PCC at every 3 metres and at every change of direction and filling the same with & including bitumen 85/25 and sand in the proportion of (1:3 ) by weight complete all as specified and as directed.

M&L for 75mm thick PCC (1:3:6) type C2 (using 40mm graded stone aggregate) as in path and paving, finished even and smooth without using extra cement complete all as specified and as directed.

M&L for 25 mm thick PCC (1:2:4) type B1 (using 20mm graded stone aggregate) as in floor, finished even and smooth with using extra cement complete all as specified and as directed.

Supply and Fixing in repairs, SFRC drain cover any size, 75mm thick laid over existing drain complete all as specified and as directed by Engr-in-Charge. Notes: - (i) Make of SFRC Manhole/drain cover and frame : (a) M/s PS Concrete.(b) M/s KK Manhole.(c) Or equivalent as approved by GE. (ii) Contractor will provide manufacturer test certificate of SFRC cover .

Dismantling wall and ceiling boards ( fibre, pulp, insulation etc.) or insulation boards / slabs / blankets, any thickness, including fillets complete all as specified and as directed.

M & L for provding false ceiling of 12mm thick fine fissure board sharped finished mineral fiber accountic false ceiling tiles with back of the duly sanded and finshed with a coat of protective paint and front duly finished false system of size (600x600) mm having noise reduction co-efficient of 0.55 light reflection of 80% thermal conductivity k=0.057 W/WWC and humidity resistance of 95% fixed to true look PVC die KL -24 suspension system (Hot dipped aglvanised steel section) of exposed T Section consisting of perimeter wall angle of size (24x24) mm of thickness 0.45 of mm c/c universal main runner of T Shape with double rotary siticing of size (38x25) mm of lenght 1200mm made from 0.33GS steel of lenght 3.60 mtr to be spced at 600x 600mm size) c/c cro runner T shape wtih double rotary siticing of size (30x24)mm of length 1200mm made 0.25 thick GS sheet spaced @ 600mm c/c (600mm 600mm) size complete all as specified and directed by Engineer -in- Charge.

M&L for solid PVC wall lining consisting of 5mm thick supreme prelaminated colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and directed.

M&L for 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC frame complete all as specified and as directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) of size not exceeding 1.50 Sqm each including cutting holes in walls of appropriate size for insertion of cement concrete blocks for hold fasts complete all as specified and as directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) of size exceeding 1.50 Sqm but n. exc 4.0sqm each including cutting holes in walls of appropriate size for insertion of cement concrete blocks for hold fasts complete all as specified and as directed.

Taking down shutters of any description of size n. exc 1 Sqm each complete all as specified and as directed.

Taking down shutters of any description of size exc 1 sqm and n exc 2 sqm each complete all as specified and as directed.

S&F anodised aluminium powder coated frame for door, windows, ventilators, partition wall with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed

S&F anodised aluminium powder coated door shutter, aluminium section wt 0.55 Kg/m including neccesary joining cleats, glazing clips, rubber neoprene packing, aluminium handle 2 nos in each door, hinges, anodised aluminium snap beading screw etc. complete all as specified and as directed.

S&F anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised, handle 2 nos in each window, aluminium fittings such as peg stays150mm long (1 no.), hinges type B-21100mm long (2 no.), suitable handle (1no.) complete all as specified and as directed.

S&F aluminium anodised with powder coating (minimum thickness of powder coating 50 micron) grill of design and parttern as approved by GE including aluminium beading complete all as specified and as directed.

M&L for 12mm thick prelaminated particle board, exterior grade, prelaminated both side with decorative choice lamination & fixed with screws to timber/aluminium frame complete all as specified and as directed

S & F door closer hydraulically regulated designation No 3 universal type suitable for door shutter of 851 to 1000 mm in width of Aluminum body (die cast) weight between 61 to 80 kg complete all as specified and as directed.

M&L double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminum alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other party made of mild steel heavy duty complete all as specified and as directed.

S & F mild steel mortic lock vertical type size 100mm 4 levers complete all as specified and as directed.

S&F aluminium tower bolt of extruded section, 150mm length of bolt and fixed with screws complete all as specified and as directed.

S&F aluminium door stopper double legged with rubber shoe 75mm long fixed to door shutters complete all as specified and as directed.

M & L 2nd class hard wood plain, solid, straight chowkhats, and frame wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned at joints complete all as specified and as directed.

S&F for 30mm thick factory made flush shutter, solid core construction with block board core and plywood face panels commercial type on both sides complete all as specified and as directed.

S&F for factory made single extruded WPC (wood polymer composit) solid door/window and other frames/chowkhat of size 50x100 mm comprising of virgin PVC polymer of K value 58-60 (suspension grade) calcium carbonte and natural fibers (wood powder/rice husk/wheat husk) and non toxic aditives(maximum toxicity index of 12 for 100 gms) fabricated with full body threaded star headed SS screws having minimum frame density of 750 kg/cum screw withdrawl strength of 2200 N(face) & 1100N(Edge) minimum compressive strength of 58 N/sqmm modules of ealsticity 900 N/sqmm and resistance to spread of flame of class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/ss dash fasteners of required dia and length complete as per direction of Enger-in-charge. Make- M/s Rajshree plastiwood ltd or its equivalent as per list of make.

S&F for factory made single extruded WPC (wood polymer composit) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (suspension grade) calcium carbonte and natural fibers (wood powder/rice husk/wheat husk) and non toxic aditives(maximum toxicity index of 12 for 100 gms) fabricated with full body threaded star headed SS screws having minimum frame density of 650 kg/cum screw withdrawl strength of 1800 N(face) & 900N(Edge) minimum compressive strength of 50 N/sqmm modules of ealsticity 850 N/sqmm and resistance to spread of flame of class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hotmelt adhesiv on both faces of shutter and fixing with stailess steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws all as direction of Enger-in-charge. Make:- M/s Rajshree plastiwood ltd or its equivalent as per list of makes.

Dismantling of floor, hearth or wall tilling including cement mortar bedding (but not backing) removing serviceable tiles and rubbish off the premises complete all as specified and as directed.

M&L for vitrified ceramic tiles 8-10 mm thick, 1st quilaty (Square/rectuangular) polished, double charge shade, area of each tiles exceeding 0.36 Sqm but not exc. 0.42 Sqm, as in floors etc. set and jointed with neat cement slurry and pointed in white or coloured cement to match with and including over15mm thick screed bed in cement mortar (1:6) complete all as specified and as directed.

Description all as per srl item No. 41.00 bove but as in skirting over 10mm thick plastering with CM (1:4) complete all as specified and as directed.

M &L for ceramic coloured/ printed non-skid tiles of size 7 to 8 mm thick( square / rectangular) area of each tile exceeding 0.06 Sqm but n exc 0.16 Sqm laid as in floors, set and jointed with neat cement slurry with and including over 15 mm thick screed bedding layers of cement sand mortar (1:4) and pointed with coloured cement to match with surfaces of tiles complete all as specified and as directed.

M&L for glazed ceramic coloured tiles (colour & shade as approved) of size (450x350)mm x 7mm thick as in vertical surfaces as in skirting and dado, set and jointed in neat cement slurry with amd including over 15mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified and as directed.

S&F in repair wash hand basin, vitreous China, flat back (550x400)mm size, white including PVC waste coupling 32mm size, PVC waste pipe 32mm bore, pair of brackets of mild steel (35 x 35 x 6)mm size including one mixer cast copper alloy 15mm bore, one brass stop valve 15mm bore and one PVC connection15mm size with PTMT nuts of length 450mm long complete all as specified and as directed by Engineer-in-Charge.

Supply & fixing in repair vitreous china EWC super constellation including flushing cistern of size (83x37x66)cm with S trap complete all as specified and as directed.

Supply & fixing in repair vitreous china Urinal pot white including partition, waste pipe, screw with wall fixing complete all as specified and as directed.

S&F in repairs two way wall mixer with popup waste system, hot and cold facilites and 450 mm long braidaed hoses chromium plated complete all as specified and as directed .

S&F in repair health faucet with double lock 1 meter brass plated stainless steel flexible hose and wall hook complete all as specified and as directed.

S & F in repair copper alloy CP toilet paper holder complete all as specified and as directed.

M&L for replacement of 100mm CI floor/nahani trap with grating including jointing and breaking/ dismantling any type of floor and making good cement concrete Type B-1 (1:2:4) and testing after repairs and taking down existing trap etc complete all as specified and as directed.

S&F in repair, brass chromium plated tubular towel rail, 20mm dia, 'D' type, 60cm long between flanges complete all as specified and as directed.

Taking up or down 15mm steel tubing and connections in walls, ceilins, floors, etc including cleaning for refixing or removal to store complete all as specified and as directed.

M&L for GI tubing, 15mm bore medium grade with all fittings and fixed complete to walls and ceilings or laid in floors etc complete all as specified and as directed.

M&L for cutting chases, pinning in making good to facings where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc, and cutting chases for concealed water tubing or concealed conduit wiring, etc and making good cutting not exc 10 cm girth as in wall complete all as specified and as directed.

S&F in repair 15mm bore cast copper alloy, CP angle cock, screwed down, high pressure, with crutch or butterfly handles, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.

S&F in repair PVC connections 15mm size with PTMT nuts of length 450mm and fixed complete all as specified and as directed.

S&F in repairs PVC connections 15mm size with PTMT nuts of length 600 mm and fixed complete all as specified and as directed.

S&F in repair cast copper alloy CP Soap dish complete all as specified and directed.

S&F in repair bib taps with wall flange 15mm bore, chromium plated, fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed.

S&F in repair pillar cock, foam flow cast copper alloy, chromium plated, fancy type, 15 mm dia, capastan heads, screwed down high pressure complete all as specified and as directed. Make:- Cat No 8304 of make Prayyag or equivalent as per list of makes.

S&F in repair plastic water closet seat cover, white/black, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed.

S&F in repair PVC valveless, syphonic action type, flushing cistern low level, 10 litre capacity , white, with inlet, ball valve, float and handle including brackets complete all as specified and as directed.

S&F in repair 610 mm long PVC waste pipe flexible type 25 mm dia suitable for couplings 32 mm / 40 mm dia complete all as specified and as directed.

S&F in repairs 15 mm bore Bib taps standard of PTMT any colour high pressure screwed for iron pipe and fixed complete all as specified and as directed. (Minimum weight 90 gms).

S&F in repairs 15 mm two in one angle valve cast copper alloy, chromium plated with wall flange and fancy type with high pressure screwed down and with CP flange of same make complete all as specified and as directed .

M&L for 18-20mm thick Granite (of jet black ) work (table rubbed and polished ) in steps, jambs, pillars, window cills, cooking plateforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed. Note:- The cost of half round moulding shall be deemed to be included in unit rate.

Dismantalling water tanks and removal from site of capacity exc 250 ltr and not exc 500 ltr complete all as specified and as directed.

M &L for 500 litres capacity rotational moulded polyethene water storage tank (cylindrical vertical with closed top), white, three layers, hoisted and fixed in position complete all as specified and as directed.

Supply and fixed ball brass valve high pressure with polythene float and fly nut complete to bore of pipe 20mm complete all as specified and as directed.

Demolition of brick work or stone buillder built in cement mortar of any description complete all as specified and as directed.

M&L for brick work with sub class B works, straight or curved on plan exceeding 6m mean radius, built in cement mortar (1:6) complete complete all specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

M&L for preparation of newly steel surfaces of any description over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over one coat of red oxide primer of any height complete all as specified and as directed.

S&F mild steel work framed such as grill, gratings, etc with ends of bars shouldered and /or riveted, or forged into spikes, framed guard bars barred iron doors, ladders, framed balusters, walk ways, railings, frame work of water tanks and similar work conforming to Fe.290.Gde-E-165. complete as specified and as directed.

Supply and fixing in repairs, pre cast cement concrete jallies, 35 mm thick, type B0 1:2:4 (using 12.5 mm graded crushed stone aggregate) including wire fabric set and jointed in cement mortar (1:4) complete as specified and as directed.

S & F in repair 12mm thick toughened glass fixed with double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminum alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other party made of mild steel heavy duty and stainless steel handle purpose made on both side with locking machanism and with necessary stopper etc complete all as specified and as directed.

Demolition and breaking up drain pipe 75/100mm dia ( Salt glazed ware, AC or PVC) of any type complete all as specified and as directed.

S&F 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including suitable clamps after every one meter of interval complete all as specified and as directed.

S&F 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including suitable clamps after every one meter of interval complete all as specified and as directed.

S&F in repairs PVC(SWR) bends any radius, 75 mm bore complete all as specified and as directed.

S&F in repairs PVC(SWR) bends any radius, 110 mm bore complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or steel, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and as directed.

S&F sheet glass 4mm thick ordinary quality and glazing with oil putty or rubeer bedding in square n. exc 0.5 Sqm in each pane complete all as specified and as directed.

S&F in repairs of sink with drainage board, made out of stainless steel 1mm thick, kitchen or laboratory with plugs, washes and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever bracket and connecting union to pipe over all size (915X460)mm with bowl size (410X330X160)mm complete all as specified and as directed.

S&F in repair brass chromium plated shower rose,125 mm size fixed to 15 mm bore iron pipe complete all as specified and as directed.

S&F in repair water closet vitreous china squatting pan, Orissa pattern size (580x440)mm white with integral foot rests (excluding flushing cistern and flush pipe) and including with 'P' or 'S trap complete including provison of lime concrete bedding fixed in repair complete all as specified and as directed.

M&L for matt finish heavy duty parking tiles 10-12mm thick, 1st quilaty (Square/rectuangular) dark shade, area of each tiles not exceeding 0.36 Sqm as in floors etc. set and jointed in neat cement slurry over 15mm thick screed bed or bedding layer of cement mortar (1:6) & pointed with Polyurethane sealent to match with the existing colour including 6mm spacing of each tiles and surface to give neat finish properly complete all as specified and as directed.

M&L for 60mm thick machine pressed precast concrete interlocking paver block of M-35 with grey cement & pigment with and including over 50mm thick sand cushioning complete all as specified and as directed.

M&L for 75mm thick PCC (1:3:6) type C-2 (using 40 mm graded crushed stone aggregate) as in floor etc complete all as specified and as directed.

M&L for PCC (1:2:4) type B1 (using 20mm graded stone aggregate) as in kerbs or mud stops, rounded or chamfered edges, etc complete all as specified and as directed.

M&L for complete removal of existing treated surface of exterior wall by electrically operated grinder including necessary scaffolding etc up to 4th storey building and applying two coats of exterior emulsion paint using smart periodical with spray) over a coat of primer of same make to obtain smooth finishing surface etc complete all as specified and as directed by Engineer - in- charge. Note:- Complete quantity of paint shall be submitted to Engr-In-Charge and work must be got executed through authorised applicator of manufacturer approved from GE before commencement of work.

M&L for preparation of old decorated plastered or unplastered surfaces of walls by brooming down or steel wire brushing, scraping down, smoke, soot's moulds, moss efflorescent salts & trading oil, greasy spots and filling cracks/holes by putty and applying a coat of oil bound distemper using smart periodical with spray including necessary scaffolding etc complete all as specified and as directed by Engr-in- Charge. Note:- Complete quantity of paint shall be submitted to Engr-In-Charge and work must be got executed through authorised Applicator of manufacturer approved from GE before commencement of work.

Taking down carefully unserviceable copper/aluminium point wiring (light, fan, socket or power)complete including fixture and fitting such as switches, ceiling rose lamp holder, regulators, sockets, light fittings, wooden terminal boxes, plastic laminated sheet cover, including taking down of DB’s, meter board any type complete all as specified and as directed.

All as per Srl item No 97.00 here-in-befor but for one light point controlled by two, 2- way switches complete all as specified and directed by Engr-in-Charge.

All as per Srl item No.97 here-in-before but for one 3 pin 5 Amps socket out let point on the same board controlled by one switch complete all as specified and directed by Engr-in-Charge.

All as per Srl item No 97 here-in-before but for 3 pin 5 Amps socket out let on independent board and different wall controlled by one switch complete all as specified and directed by Engr-in-Charge.

All as per Srl item No 97 here-in-before but for one power point 6 pin 15 Amps socket out let with 2.5 Sq mm stranded copper conductor cable PVC insulated FRLSH including earth wire 2.5 Sq mm copper FRLSH conductor cable connected to earth dolly complete, all as specified and directed.

All as per Srl item No 97 here-in-before but for one bell/buzzer point controlled by one push button on the same board with other switches or independent with cable size 1.5 Sq mm PVC insulated stranded sheathed copper conductor complete, all as specified and directed.

Material and labour for point wiring with single core PVC sheathed 1100 volt grade cable with multi stranded copper conductor of size 1.5 sqmm FRLSH (nominal area) drawn through and including non metallic rigid PVC casing and capping wiring on ceiling and roof duly ISI marked including tee, GI screw, junction boxes with suitable size of sunk type cast iron or pressed steel terminal box for mounting of modular switches, sockets, fan regulator etc with modular white cover plate with frame for suitable module as per site requirements and drawing continuous earth wire with and including PVC sheathed 1100 Volts grade cable with stranded copper conductor of size 1.5 sqmm (nominal area) and connected to main earth dolly complete all as specified for one light / fan / exhaust fan point controlled by one Switch.

All as per Srl item No. 103.00 here-in-before but for one 3 pin 5 Amps socket out let point on the same board controlled by one switch complete all as specified and directed.

All as per Srl item No 103.00 here-in-before but for 3 pin 5 Amps socket out let on independent board and different wall controlled by one switch complete all as specified and as directed.

All as per Srl item No 103.00 here-in-before but for one power point 6 pin 15 Amps socket out let with 2.5 sqmm stranded copper conductor cable PVC insulated including earth wire 2.5 sqmm copper conductor cable connected to earth dolly complete all as specified and as directed.

S&F modular switch 1 way 6 Amps one module complete all as specified and as directed.

S&F modular switch 2 way, 6 Amps one module complete all as specified and as directed.

S&F modular socket 6 Amps 2/3 Pin combined 02 module complete all as specified and as directed.

S&F modular switch one way 16 Amps one module complete all as specified and as directed.

S&F socket modular type 6 amp/16 amps, 2/3 pin combined 02 Module complete all as specified and as directed.

S&F modular bell push switch 1 way 10 Amps one module complete all as specified and as directed.

S&F modular fan regulator 120 Watt, 2 Module complete all as specified and as directed.

S&F switch piano flush type 5 Amps, single pole one way complete all as specified and as directed.

S&F socket out let 3 pin 5 Amps, flush type complete all as specified and as directed.

S&F switch piano flush type single pole one way 15 Amps complete all as specified and as directed.

S&F socket outlet 2 in 1, 3 pin 5/15 Amps, flush type complete all as specified and as directed.

S&F switch socket combination, multistranded 2 in 1, 6 and 16 Amps, flush type with PVC gang box surface type complete all as specified and as directed.

S&F switch socket combination multistranded 2 in 1, 6 Amps, flush type with PVC Gang box surface type complete all as specified and as directed.

S&F ceiling rose, surface type, 65mm x 50mm, 2 to 3 terminal complete all as specified and as directed.

S&F electric ding dong bell, 230 volt AC, single pole, complete all as specified and as directed.

S&F Long range cordless bell, hard plastic body electrical operated with cordless switch complete all as specified and directed.

S&f lamp holder, PVC/polycarbonate type, insulated body with back plate of batten fitting complete all as specified and as directed.

S&F stepped type fan regulator 120 watt, 230 volts, 50 Hz, AC supply complete all as specified and as directed.

S&F metal clad socket outlet 3 pin two phase one neutral 20 Amp suitable for metal clad AC box complete all as specified and as directed.

S&F metal clad plug top 3 pin two phase one neutral 20 Amp suitable for metal clad AC box complete all as specified and as directed.

S&F in replacement LED recessed mounting square slim LED down lighter 36 Watt for AS/GB/POP ceiling 2'x2' size complete with driver internally prewired and connecting up with twin core flexible copper conductor cable of suitable size complete all as specified and as directed.

S&F in replacement Trim Clipon LED panel round 24W 6500K unique slimmest recess cum surface panel with and including connecting with twin core copper conductor twisted cable and testing on completion all as specified and as directed.

S&F environmental friendly, ultra modern, energy saving, surface mounted, decorative hexagon bulk head LED luminaire 10W complete all as specified and as directed.

S&F in replacement indoor decorative LED battens - integrated type 20 watt 4 feet white 6500K fixture complete with all accessories internally pre wired with and including connecting up with twin core copper conductor cable complete all as specified and as directed.

S&F in replacement indoor decorative LED battens - integrated type 20 watt 4 feet white 3000K fixture complete with all accessories internally pre wired and including connecting up with twin core copper conductor cable complete all as specified and directed by Engr-in-Charge.

S&F for Indoor decorative LED Battens - integrated type 10 watt 2 feet white fixture complete with driver and all accessories internally pre wired and including connecting up with twin core copper conductor cable complete all as specified and directed by Engr-in-Charge.

Supply and fixing sheet metal enclosure for distribution board SPN (when MCBs to be used) 12 way, double door 200 Amps rated bus bars and with neutral, earthing bar and din rail complete all as specified and as directed by Engr-in-Charge.

Supply and fixing sheet metal enclosure for distribution board SPN (when MCBs to be used) 8 way double door, 200 Amps rated bus bars and with neutral, earthing bar and din rail complete all as specified and as directed by Engr-in-Charge.

Supply and fixing sheet metal enclosure for distribution board SPN (when MCBs to be used) 4 way double door, 200 Amps rated bus bars and with neutral, earthing bar and din rail complete all as specified and as directed by Engr-in-Charge.

Supply and fixing sheet metal enclosure for distribution board TPN (when MCBs to be used ) 4 way double door, 415 Amps rated bus bars and with neutral, earthing bar and din rail complete all as specified and as directed by Engr-in-Charge.

Supply and fixing vertical type load line distribution board, double door, 4 way, AC, 3 Phase, 415 volts ,TPN, bus bar 200 Amps rating and earth bus & din rail suitable for MCCB as incomer complete all as specified and as directed.

Supply and fixing MCCB, 4 pole,100 Amp, 10 kA complete all as specified and directed.

Supply and fixing MCCB, 4 Pole 125 Amp, 16 kA complete all as specified and directed.

Supply and fixing for MCB, 4 pole, 63 Amp, 10 kA complete all as specified and directed.

Supply and fixing for MCB, TP 63 Amp, 10kA complete all as specified and directed.

Supply and fixing MCB, TP 32 Amp,10 kA complete all as specified and directed.

Supply and fixing MCB, SPN, 63 Amp, 10 kA complete all as specified and directed.

Supply and fixing MCB, SPN, 40 Amp,10 kA complete all as specified and directed.

Supply and fixing MCB, SP, 6-32 Amp,10 kA complete all as specified and directed.

Supply and fixing MCB, SP, 40 Amp, 10 kA complete all as specified and directed.

S&F PVC insulated multi stranded copper conductor of size 1.5 Sq mm FR-LSH (Nominal area) conforming to IS-694 complete all as specified and directed.

S&F PVC insulated multi stranded copper conductor of size 2.5 Sq mm FR-LSH (Nominal area) conforming to IS-694 complete all as specified and directed.

S&F PVC insulated multi stranded copper conductor of size 4.0 Sq mm FR-LSH (Nominal area) conforming to IS-694 complete all as specified and directed.

S&F PVC insulated multi stranded copper conductor of size 6.0 Sq mm FR-LSH (Nominal area) conforming to IS-694 complete all as specified and directed.

S&F PVC insulated multi stranded copper conductor of size 10.0 Sq mm FR-LSH (Nominal area) conforming to IS-694 complete all as specified and directed.

S&F non metallic rigid PVC conduit medium duty ISI marked 20mm dia including necessary tees, junction boxes saddles with screws complete all as specified and as directed.

S&F non metallic rigid PVC conduit medium duty ISI marked 25mm dia including necessary tees, junction boxes saddles with screws complete all as specified and as directed.

S&F PVC Modular Gang box surface type 1 M complete all as specified and as directed.

S&F PVC Modular Gang box surface type 3M complete all as specified and as directed.

S&F PVC Modular Gang box surface type 6M complete all as specified and as directed.

S&F PVC Modular Gang box surface type 8M complete all as specified and as directed.

S&F PVC Modular Gang box surface type 12M complete all as specified and as directed.

Material and labour for submain wiring with two single core 2.5 sqmm PVC insulated FRLSH multistranded copper conductor cable drawing into and including rigid non metallic PVC conduit, medium grade ISI marked with all conduit fittings & fixing accessories and one single core 2.5 Sqmm FRLSH multistranded copper conductor cable as continuous earth wire including taking down old unserviceable wiring any type complete all as specified and as directed by Engr-In-Charge.

Material and labour for submain wiring with two single core 4 sqmm PVC insulated FRLSH multistranded copper conductor cable drawing into and including rigid non metallic PVC conduit, medium grade ISI marked with all conduit fittings & fixing accessories and one single core 4 Sqmm FRLSH multistranded copper conductor cable as continuous earth wire including taking down old unserviceable wiring any type complete all as specified and as directed by Engr-In-Charge.

Material and labour for submain wiring with two single core 6 sqmm PVC insulated FRLSH multistranded copper conductor cable drawing into and including rigid non metallic PVC conduit, medium grade ISI marked with all conduit fittings & fixing accessories and one single core 6 Sqmm FRLSH multistranded copper conductor cable as continuous earth wire including taking down old unserviceable wiring any type complete all as specified and as directed by Engr-In-Charge.

Material and labour for submain wiring with two single core 10 sqmm PVC insulated FRLSH multistranded copper conductor cable drawing into and including rigid non metallic PVC conduit, medium grade ISI marked with all conduit fittings & fixing accessories and one single core 10 Sqmm FRLSH multistranded copper conductor cable as continuous earth wire including taking down old unserviceable wiring any type complete all as specified and as directed by Engr-In-Charge.

Supply and fixing sheet metal enclosure single pole and neutral with a two pin and earth plug and socket complete with one single pole MCB 20 amps complete all as specified and as directed by Engr-In-Charge.

M&L for PVC insulated service cable flat or round sheathed, aluminium, multistranded conductor 1100V grade of size 16 sqmm 2 core complete all as specified and as directed by Engr-in-Charge.

All as per srl item No. 164.00 here-In-before but 10 Sqmm 2 core cable complete all as specified and as directed.

M&L for earthing complete for bldg with galvanized mild steel earth plate electrode (60cm x 60cm) x 6mm thick buried directly in ground (earth pit not less than 2.25 meters below ground level) with top edge of earth plate not less than 1.5 meters below ground level connected to galvanized earth wire 4.00mm dia by means of nuts, bolts, thimbles, check nuts, washers of GI or steel, PCC (concrete chamber of size 300 mm x 300 mm x 300 mm inside dimension) shall be PCC (1:3:6) type C-1 (using 20mm graded crushed stone aggregate) with fair finish, internal surface of concrete chamber shall be given 15mm thick plaster in CM (1:4), funnel with wire gauge of 22 gauge, 8 mesh per liner inch, 80 mm thick PCC pit cover 320mm x 320mm of RCC (1:2:4) type B-1 (using 20 mm graded crushed stone aggregate) reinforced with XPM, jalli and charcoal dust and common salt all as shown in electrical plate No 3 of MES SSR Part-I (2009) and specified including provision of earth wire protected by 15mm dia medium grade GI pipe and watering GI pipe shall be 20mm bore medium grade etc complete, all excavation and earth work & connecting the earthing to an earthing test point main switch board as specified and testing on completion complete all as specified & directed by Engr-in-Charge.

Supply and fixing LED bldg light 25 watt IP66 with internally prewired including electronic driver and connecting up with three core flexible copper conductor 1.5 sqmm cable including GI pipe medium grade 40mm dia bracket not less than 1.5 Mtr long and bend to a shape for fixing of building security light including 02 nos MS clamps made out of (25x6)mm MS flat including 04 nos fully threated bolts and nuts fixing on wall etc complete all as specified and as directed by Engr-in-Charge.

Supply and fixing switch flame proof rotary type with termination box in LM6, 16Amp, single pole 250 V complete all as specified and as directed.

Supply & fixing LED Adore lamp 2.8 Watt warm white B27 complete all as specified and as directed.

Supply & fixing plug top 16 Amp, 3 Pin 230 Volt, AC complete all as specified and as directed by Engineer-in-Charge.

Supply & fixing plug top 6Amp, 3 Pin 230 Volt, AC complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs recessed type 7W LED panel round shape, slim, compact, warm white 3000K aluminium die cast edge lit panel with opal diffuser and separate electronic driver and including providing and connecting with twin core copper conductor twisted cable and testing on completion complete all as specified and as directed by Engr-in-Charge.

S&F in repairs recessed type 15W LED panel round shape, slim, compact, warm white 3000K aluminium die cast edge lit panel with opal diffuser and separate electronic driver and including providing and connecting with twin core copper conductor twisted cable and testing on completion complete all as specified and as directed by Engr-in-Charge.

Supply and fixing plastic body ventilation fan with louvers complete of 200/230/300 mm sweep, 230 volts, single phase, AC Supply complete all as specified and as directed by Engr-in-charge. Note:- Old/Unserviceable fans shall be deposited in MES store.

Supply and fixing metal body exhaust fans AC, single phase, 230/240 volts of size 300 mm sweep with louvers complete all as specified and as directed. Note:- Old/Unserviceable fans shall be deposited in MES store.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200mm sweep, minimum air delivery 210 CFM with service value 6.00 BEE five star rated with brushless direct current motor (BLDC) complete all as specified and as directed by Engineer-in-Charge. Note: Old/Unserviceable fans shall be deposited in MES store.

Supply and fixing in replacement of capacitors up to 3.15 Mfd complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in replacement of capacitors up to 2.5 Mfd complete all as specified and directed by Engineer-in-Charge.

S&F in replacement of high speed motor 230V AC suitable for 300mm exhaust fan with super enamelled copper wire of suitable size complete all as specified and as directed.

S&F in replacement of high speed motor 230V AC suitable for 200/230mm ventilation fan with super enamelled copper wire of suitable size complete all as specified and as directed.

M&L for rewinding of exhaust fans with super enameled copper wire of suitable size up to 450mm sweep of any make/type/model complete all as specified and as directed.

Please Enable Macros to View BoQ information