GE(S) BTD TOKEN NO 06 OF 2023-24 PROVISION OF CERTAIN SPECIAL REPAIR AND LBW WORK UNDER AGE BR I AND AGE EM VI UNDER GARRISON ENGINEER (SOUTH) BATHINDA AT BATHINDA MILITARY STATION

Amount

Taking down chowkats or frame with shutter (without taking out shutter from the frame) not exceeding 1.50 sqm each as doors, windows & ventilators etc. and removal from site complete all as specified and directed

Taking down chowkats or frame with shutter (without taking out shutter from the frame) exceeding 1.50 sqm but not exceeding 4.00 Sqm each as doors, windows & ventilators etc. and removal from site complete all as specified and directed

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed

S&F for factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top and bottom rails MS frames shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom raid on either side and as gap insert for top rail on either side andas gap insert for top rail and bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rials with suitable PVC sheet beading, and joined together with solvent cewment, suppling and fixing in the frame at site as per specification and drawing complete all as specified and directed

S&F extruded Aluminium anodised 100 mm long Butt hinges type B-21 with galvanised mild steel hinge pin complete all as specified and directed

S&F Aluminium anodised barrel tower bolts, 150 mm long of extruded section complete all as specified and directed.

S&F 150mm long Aluminium anodised handles, cast type anodised complete all as specified and directed.

S&F 125mm long Aluminium anodised handles, cast type anodised complete all as specified and directed.

Taking down shutters any description exc 1 Sqm but n.exc 2 sqm each, and refixing in the same opening complete all as specified and directed

S&F Pressed steel frames of size 125 X 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, (thickness of sheet shall be 1.25mm) and making good the wall with plaster in CM 1:6 complete all as specified and directed

M&L PCC 1:3:6 type C-1 using 20 mm graded stone aggregate for filling in back of pressed steel door frame/chowkhat and fixing of bed block of hold fast etc complete all as specified and as directed.

S&F 2nd class HW factory made Plain, framed, pannelled shutters 35 mm thick (two panels), with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS:1003 (Part I) Kiln seasoned and chemically pressure treated complete all as specified and directed

S&F 2nd class hardwood glazed skeleton shutters 35 mm thick open rebated and prepared to receive guage etc but divided into squares, with plain chamfered or rounded, metered and riveted sash bars any numbers complete all as specified and directed

S&F Steel window with side hung shutters including projecting type hinges with steel handle and steel peg stay complete with glazing bars dovetailed or welded including one shop coat painting complete all as specified and directed

S&F Steel window with side hung shutters including projecting type hinges with steel handle and steel peg stay complete with out glazing bars dovetailed or welded including one shop coat painting complete all as specified and directed

S&F fixed type Steel windows / ventilators for industrial buildings, with glazing complete all as specified and directed

S&F for 3 mm thik ordinary sheet glass and glazing with oil putty in square nexc 0.5 sqm in each panes including hacking out old broken glass from metal frame of any thikness incl punching or drilling out old glazing pins / springs clips complete all as specified and directed

S&F in repair galvanised mild steel wire cloth 0.36mm nominal dia of wire and average width of aparture 1.18mm and fixed with tinned tacks ro galvanised wire stapple complete all as specified and directed

S&F Stainless steel wire cloth 0.36 mm nominal dia of wire and avarage width of aparture 1.40mm and fixed etc complete all as specified and directed

S&F 300 mm size mild steel ordinary rat rail rod pattern springs including roller and roller plate complete all as specified and directed

S&F 250 mm long mild steel sliding bolt plate type stove enamelled black with bright bolt not less than 12 mm dia with and including a minium of 6 bolts and nuts four on bolt plate and two on stapple plate and fixed complete all as specified and directed

S&F 250 mm long aluminium sliding bolt plate type stove enamelled black with bright bolt not less than 12 mm dia with and including a minium of 6 bolts and nuts four on bolt plate and two on stapple plate and fixed complete all as specified and directed

S&F 200 mm long mild steel barrel tower bolts, ISI market stove enamelled block with bright bolt and fixed complete all as specified and directed.

S&F 150mm long oval type mild steel pressed handles, ISI marked stove enamelled black complete all as specified and as directed.

S&F 150mm length floor door stopper of aluminium alloy body and tongue,anodised with hard drawan steel spring fixed in floor complete all as specified and directed

M & L sheet glass ordinary quality 3 mm thick and glazing with oil putty in square n exc 0.50 sqm in each panes fixed to steel, metal or wooden window frames complete all as specified and directed

All as per item No. 26 above but pin head type, figured glass complete all as specified and directed

M & L sheet glass ordinary quality 4 mm thick and glazing with oil putty in square n exc 0.50 sqm in each panes fixed to steel, metal or wooden window frames complete all as specified and directed

All as per item No. 28 above but pin head type, figured glass complete all as specified and directed

S&F framed brackets of angles cut to shape, drilled and counter sunk for screw including bending and welding angles as necessary, each backets confirming to Fe - 290, Gde - E - 165 as door frame, hand wash basin, cooler stand etc complete all as specified and directed

Cutting holes in brick walls built in cement mortar including making good dismantled portion in CM (1:3) or cement concrete (1:2:4) type B-1 exc half brick but n.exc one brick complete all as specified and directed

M&L for preparation of new steel surfaces of any description over 10cm width or girth and applying two coasts of synthetic enamel paint over one coat of Red Oxide (for steel surfaces) complete all as specified and directed

M&L preparing new wood or wood based surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Demolition of Cement concrete (unreinforced) of any description and in any position not otherwise specifically provided complete all as specified and directed

Supply only Integral water proofing compound complete all as specified and directed

Water proofing treatment to sunken slab and adjoining vertical surfaces as specified under:- (a) M&L rendering 10mm thick in cement plaster(1:3) using coarse sand mixed with integral water proofing compound trowel even and smooth with steel trowel on sunken surfaces. (Note : WPC shall be measured and paid separately). (b) Applying first coat of chemical pidifin 2K(Dr Fixit) o cleared RCC surfaces @ 0.86 Kg/sqm (minimum) as recommed by manufacturers. (c) Provide a layer of glass fiber mesh sixe 2.25mm x 2.25mm (45 GSM) over first coat of chemical pidifin 2K as per manufacturer recommendation. (d) Applying second coat of chemical pidifin 2K (dr Fixit) @ 0.86 Kg/Sqm (minimum) over layer of glass fibre mesh of size 2.25mm x 2.25mm (45 GSM) as recommended by manufacturer's.

M&L for PCC 1:5:10, type E-2 as in filling of sunken floors etc complete all as specified and directed

Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed

M & L for 25mm thick cement concrete type B-0, 1:2;4 (12.5mm graded stone aggregate) as floors, sub-floors etc and finishing surfaces of concrete topping as even & fair or even & receive the topping layer complete all as specified and directed.

M & L for 40mm thick cement concrete type B-1, 1:2;4 (20mm graded stone aggregate) as floors, sub-floors etc and finishing surfaces of concrete topping as even & fair or even & receive the topping layer complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), terrazo dado/wall tiling and skirting. etc on brick or stone walls etc including racking out joints hacking for key and scrubbing removing serviceable tiles to store and rubbish off the premises etc complete all as specified and directed

S&F non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.11 sqm but n.exc 0.18 sqm in floors, over and including 15mm thick screed in CM (1:6) set and jointed in neat cement slurry and pointed with white or coloured cement to match complete all as specified and directed

S&F non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.11 sqm but n.exc 0.18 sqm in floors, over and including 15mm thick screed in CM (1:4) set and jointed in neat cement slurry and pointed with white or coloured cement to match complete all as specified and directed

S&F glazed ceramic coloured tiles joint free 300x450x7mm thick in skirting/dado etc set and jointed in neat cement slurry and pointed to match the surfaces etc, over & including 10mm thick screed in CM 1:4, complete all as specified and directed

M & L for 600x600 vitrified ceramic tiles (light shade) 10mm thick polished in floors etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 15mm thick screed bedding layer in CM 1:4 and including dismantling of old tiles/terrazzo finish etc. complete all as specified and directed

M & L for vitrified ceramic tiles (light shade0 10mm thick polished (square / rectangular) on vertical surfaces as in skirting etc, set and jointed in neat cement slurry/ paste and pointed in white or coloured cement to match over and including 10mm thick plaster in CM 1:4 and including dismantling of old tiles/terrazo finish etc; complete all as specified and directed

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc incl brushing neat cement slurry with 3.0kg of cement per sqm complete all as specified and directed

M&L, Machine cut kota stone slab flooring 20-25mm thick over 15mm thick cement screed base in cm 1:4 laid and jointed With grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specified and directed

M&L, Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed

Surface Excavation in loose or soft soil n.exc 30 cm in deep and averaging 15 cm deep and getting out in soft/loose soil complete all as specified and directed

Removing excavated material n.exc 50m and depositing where directed at a level n.exc 1.50 m above the starting point complete all as specified and directed

S&F 60mm thick inter locking PCC block of M-35 approved design plain/colour laid over and including 25mm thick sand bed complete as per IS 15658-2006 complete all as specified and directed

M&L for 75mm thick Cement concrete 1:4:8 type D-2 using 40 mm graded stone aggregate as in sub base complete all as specified and directed

M&L for Continious brick edging with width equal to the depth of the brick, laid on end vertically of old size with burnt clay bricks of sub class 'B' complete all as specified and directed

S & F in repair PVC connection 15 mm size with PTMT nuts of length 600 mm of approved quality complete all as specified and directed

S & F in repair PVC connection 15 mm size with PTMT nuts of length 450 mm of approved quality complete all as specified and directed

S & F in repair 15 mm bore chromium plated Angular stop valve of cast copper alloy screwed down high pressure with crutch butter fly handle screwed both ends for iron pipe or for unions and fixed complete all as specified and directed

S&F in repair brass chromium plated shower rose 125 mm of size with arm and with or without swivel joints to steel pipe or union complete all as specified and as directed

S & F in repairs 15 mm dia bore fancy type chromium plated concealed stop valves of cast copper alloy with long shank & cup etc. complete all as specified and as directed.

S & F in repairs 15 mm dia bore fancy type chromium plated concealed angle cock, cast copper alloy,screwed both ends for iron pipe complete all as specified and as directed.

S&F in repair brass chromium plated tubular towel rail, 20 mm dia, D type, 60 cm long between flanges complete all as specified and directed

S & F Stainless steel fancy type peg set of four and fixed in position with steel screws complete all as specified and directed.

S&F chromium plated soap tray of 150mm x 150mm x 1mm thick size and fixed to plugs on wall with chromium plated brass screws complete all as specified and directed.

S & F in repair 125 mm dia CP Grating, (with or without hole) fixed on floor/nahani trap complete all as specified and directed

S&F in repair 15 mm dia bore fancy type chromium plated bib taps cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe, or for brass ferrule complete all as specified and as directed.

S & F in repair Harrison rails, mild steel, chromium plated with fixing brackets, stops, roller etc complete all as specified and directed

Taking up or down GI tubing 15 mm bore pipe for re-fixing or removal to store complete all as specified and directed

Taking up or down GI tubing 20 mm bore pipe for re-fixing or removal to store complete all as specified and directed

Taking up or down GI tubing 25 mm bore pipe for re-fixing or removal to store complete all as specified and directed

S&F GI tubing 15 mm bore medium grade galvanise with all fitting and fixed to walls & ceilings or laid in floors complete all as specified and directed

S&F GI tubing 20 mm bore medium grade galvanise with all fitting and fixed to walls & ceilings or laid in floors complete all as specified and directed

S&F GI tubing 25 mm bore medium grade galvanise with all fitting and fixed to walls & ceilings or laid in floors complete all as specified and directed

Refixing 15 mm dia ,old steel tubuing and connections in new or old possition (wall,ceiling and floors etc) including cleaning complete all as specified and directed

Refixing 20 mm dia ,old steel tubuing and connections in new or old possition (wall,ceiling and floors etc) including cleaning complete all as specified and directed

S & F 110 mm bore of pipe PVC (SWR) pipes single socket in any length with rubber ring joint fixed to walls with MS clamps complete all as specified and directed incl Taking down rain water pipe and eaves gutters (any size and pattern) including all fittings heads shoes bends swan necks etc including cleaning or refixing or removal to store(measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed

S & F 110 mm bore of pipe PVC (SWR) bends of any radius / shoe fixed to PVC pipes complete all as specified and directed

S&F in repairs 100 mm CI connection socket to fit out let of WC complete all as specified and directed

S&F in repairs CI cowls 75 mm complete all as specified and directed

S & F MS grating 150mm dia circular/quare size fixed over roof complete all as specified and directed.

S&F in repairs 20mm gun metal globe or gate valve with iron wheet head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F in repairs 25mm gun metal globe or gate valve with iron wheet head, screwed both ends for iron pipe and fixed complete all as specified and directed.

M & L for cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and directed.

S & F in repairs vitreous China squatting pan of Orrissa pattern of approved make of size 580 mm X 440mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe incl lime concrete bedding and connection to antisyphonage pipe etc including making good to floor complete all as specified and directed.

S & F PVC low level cistern of 10 ltrs capacity with top push buttion inclusive of brackets and PVC bend long type and connectin to flush pipe of any size and pattern with inlet ball valve float and handle complete of approved make complete all as specified and directed.

S&F in repairs wash hand basin of size 450 x 300 mm vitreous China white flat back/corner type including brackets, waste coupling & PVC waste pipe of 32 mm dia complete all as specified and directed.

Dismantling and disconnecting of existing CI soil vent pipe 100 mm bore fixed to wall,laid in trenches incl all fittings & accessories complete all as specified and directed.

Dismantling and disconnecting of existing CI soil vent pipe 75 mm bore fixed to wall,laid in trenches incl all fittings & accessories complete all as specified and directed.

S&F 100mm dia Cast Iron soil, sand cast, waste & vent pipes in any length with or without ears, with cement joints but fixed to walls/floor & fixing with clamps complete all as specified and directed.

S&F 75mm dia Cast Iron soil, sand cast, waste & vent pipes in any length with or without ears, with cement joints but laid in floor/wall complete all as specified and directed.

S&F 100mm bore, CI bends (any radius), diminishing pieces or tapers (large bore measured) with oval access door, complete all as specified and directed.

S&F 75mm bore, CI bends (any radius), diminishing pieces or tapers (large bore measured) with oval access door, complete all as specified and directed.

M&L for 100mm dia of CI floor trap with grating incluing jointing to waste pipe fixed in cement concrete 1:2:4 type B1 complete all as specified and directed.

M&L for 75mm dia of CI floor trap with grating incluing jointing to waste pipe fixed in cement concrete 1:2:4 type B1 complete all as specified and directed.

M & L for Salt-glazed stoneware gully traps of size 150 x 150 mm, square or round mouthed, type 'P' complete all as specified and directed.

M&L for extra Joints over cast iron pipe of 100 mm bore pipes, bend joints. etc is provided Epoxy joints in lieu of cement joint, complete all as specified and directed.

M&L for extra Joints over cast iron pipe of 75 mm bore pipes, bend joints. etc is provided Epoxy joints in lieu of cement joint, complete all as specified and directed.

M&L for providing, precast cement concrete type B1 1:2:4 (20 mm graged aggregate) as in manholes covers, Kitchen sink slab, etc.(of any section indicated), with plain fair faces, including chamfers weatherings, throating etc. and setting in mortar complete with joints to match complete all as specified and directed.

Dismantling of brick tiles or terracing tiles single layer on roof & disposal of retrieved material upto a distance n.exc 100m where directed, complete all as specified and directed.

Demolition of mud in roof, any thickness including plastering and leaping (where full thickness removed or only a part there of disposal off rubbish upto a distance n.exc 100m, complete all as specified and directed.

M&L Rendering 15 mm thick (avg thickness) on roof surface including flashing and junctions of parapets etc finished even and fair in C:M 1:3 mixing with WPC as per recommended ratio after brushing cement slurry @1.2 Kg /Sqm complete all as specified and directed. (Note : WPC shall be measured and paid seperately)

M&L for Priming surfaces and applying normal treatment (for moderate condition ) using glass fibre base bitumen felt, grade 2 and APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. Not less than 150 gms/sqm) land on primed su rface by forced application as treatment (for moderate conditions)including after applying bituminous primr @ 0.4 Lt /Sqm over RCC / Plastered roof surface and flashing etc complete all as specified and directed.

M&L for lime concrete using 40mm thick brick aggregate laid to slope over RCC roof as padding complete all as specified and directed.

S&F factory made 250mmX250mm size and 20-25mm thick PCC tile with Grey cement and no Pigment Bedded over 15mm thick cement mortar 1:4 Joints grouted flush in CM (1:3) mixed with 5 % of crude oil by weight of cement on lime concrete complete all as specified and directed.

Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 etc complete all as specified and as directed.

M & L for benching with PCC (1:2:4) type B1 (20mm stone graded aggregate) using WPC along side wall adjoining to roof in concave shpe complete all as specified and as directed.

Taking down Cement plaster lime plaster including raking out joints hacking for key scrubbing down with water etc complete all as specified and as directed.

M&L for rendering 15mm thick in patches in cement mortar 1:6 on other than fare face of brick work or concrete surfaces and finishing the surface even & smooth without using extra cement complete all as specified and as directed.

M&L for rendering 15mm thick in patches in cement mortar in 1:4 on fare face of brick work or concrete surfaces even and smoothe without using extra cement & with using integral water proofing compound complete all as specified and as directed.

M&L for rendering 5mm thick in cement mortar in 1:3 on ceiling complete all as specified and as directed.

M&L for applying one coats of Dr Fixit pidecrete URP in chajja, staircase. etc by using 2 Sqm per 1 Kg URP + cement in the proportion of (1:1.5) and making pedicrete solution and applying by brush. etc; complete all as specified and as directed.

Demolition of brick work or stone / boulder masonary, of any type built in cement mortor in foul condition etc complete all as specified and directed.

M&L for brick work built in cement and sand mortar 1:6 with sub class 'B' old size bricks straight or curved on plan exceeding 6m means radius complete all as specified.

M&L PCC (1:3:6) type C-2 (using 40mm graded agg) 75mm thick as in plinth protection finishing fair, even and smooth without using extra cement.

Demolition of RCC of any descrition such as Kitchen chimney, chajja, shelves, OHT Tanks. etc and in any position not other wise specially provided for complete all as specified and directed. (reinforcement cut as required to facilitate demolition)

M&L for reinforced cement concrete type B1 1:2:4 (20 mm graged aggregate) as in Slab supported on walls, beams and column in floors, roofs, landings, balconies, deck slabs and in shelves and etc. and setting in mortar complete with joints to match complete all as specified and directed.

M&L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Ditto but 6mm to 8mm dia as in stirrups complete all as specified and directed.

Use and waste of form work to rough finished surfaces of soffits of suspended slab such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick complete all as specified and as directed.

S&F 500 ltrs capacity Rotational moulded polyethylene in white coloured three layered ISI Marked water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as per specified and directed incl Dismantling water tanks of exc 250 and n.exc 500 ltrs capacity water storage tanks complete all as specified and as directed.

S&F 20 mm ball valves high pressure of PTMT with epoxy coated aluminium rod & hihdesity plastec ball screwed for iron pipe and fixed. (Minimum weight 20mm - 210 gms) etc complete all as specified and as directed.

Refixing only 500 Ltrs capacity rotational moulded polyethylen water storage tank after cleaning and removing all scale and dirt etc from tanks and from mouths of cirulating pipes etc complete all as specified incl dismantling of tank complete all as specified and as directed.

Refixing only 1000 Ltrs capacity rotational moulded polyethylen water storage tank after cleaning and removing all scale and dirt etc from tanks and from mouths of cirulating pipes etc complete all as specified incl dismantling of tank complete all as specified and as directed.

M&L applying two coat of white wash on old plastered surfaces of wall incl preparation etc complete all as specified and as directed.

M&L applying three coat of white wash on New plastered surfaces of wall incl preparation etc complete all as specified and as directed.

M&L for applying three coat of white wash on old plastered surface of ceiling incl prepetc complete all as specified and as directed.

M&L for applying three coat of white wash on new plastered surface of ceiling incl prepetc complete all as specified and as directed.

M&L for complete removal of existing surfaces of walls and applying two coat of Cement Based paint over a coat of primer incl prep of surface etc complete all as specified and as directed.

M&L applying Two coat of Cement Based paint on New plastered surfaces of wall over a coat of primer incl preparation etc complete all as specified and as directed.

M&L applying one coat of Cement Based paint on New plastered surfaces of wall over a coat of primer incl preparation etc complete all as specified and as directed.

M&L for complete removal of existing surfaces of walls and applying two coat of Oil Bound Distemper paint over a coat of primer incl prep of surface etc complete all as specified and as directed.

M&L applying Two coat of Oil bound distemper on New plastered surfaces of wall over a coat of primer incl preparation etc complete all as specified and as directed.

M&L for prepration of old steel surfaces of any description over 10 cm width or girth and applying one coats of synthetic enamel paint on existing steel surface complete all as specified and as directed.

M & L for applying one coats of synthetic enamel paint on wood and wood based surfaces of any description, over 10cm width or girth, not other wise described including preparation of old painted surfaces complete all as specified and as directed.

M & L for first quality, scratch free, straight cut/joint free, 9-10mm thick vitrified pavers of size 300mm x300mm for external use in floors & incl 15 mm thick in CM 1:6 cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of sab complete all as specified and directed.

Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth ; for foundation, etc. or for shafts, wells, cess pits, manholes, pier holes, for laying cables etc. not exceeding 10 Sq m on plan and not exceeding 1.5 m in depth and getting out in any type of soil complete all as specified and directed.

M & L for earth work in excavation by mechanical means (Hydraulic excavator)/ in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5m, including getting out the excavated complete all as specified and directed.

Rough excavation in soft / loose soil not exceeding 1.5m deep and getting out complete all as specified and directed.

Returning filling in, approved soft/loosesoil, including spreading , levelling, watering and well ramming in layers, each layer not exceeding 25cm in soft/loose soil complete all as specified and directed.

M & L for cement concrete 1:4:8 type D-2, (40mm graded stone aggregate) as in foundation, filling mass concrete complete all as specified and directed.

M & L for cement concrete 1:2:4 type B0, (12.50mm gradedcrushed stone aggregate) as in bedding, benching of manholes, coping, roof kerbs & surface channel etc including necessary formwork, complete all as specified and directed.

M& L for 15mm thick rendering in CM (1:6) on fair faces of brick masonry or concrete surfaces and finishing even & smooth without using extra cement complete all as specified and directed.

Material and labour for reinforced cement concrete 1:2:4 nominal mix using 20 mm graded stone aggregate as in foundations, including rafts, footings, foundation beams, plinth beams, bases for columns, basement slabs, under-reamed piles and mass concrete footings, foundation beams etc complete all as specified and as directed

M & L for RCC 1:2:4 (Nominal mix) using 20mm graded aggregate columns complete all as specified and as directed

M & L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter on rough finished surface of concrete complete all as specified and as directed.

M & L for formwork for fair finished surfaces of sides of pillars, post, struts, piers, columns and stanchions complete all as specified and as directed.

Rounding of / moulding to edges (half round) of stone of any description including rubbing and polishing (Granite finish) complete all as specified and as directed.

S & F framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed

M & L for 25mm thick ( measured solid) precast cement concrete louvers and jallies, type B-1, 1:2:4 using 12.5mm graded stone aggregate including all mouldings etc., set in CM 1:6, complete all as specified and directed.

Supply and fixing in repair three layers 1000 liter HDPE water storage tanks polyproof. white in colour rotational moulded polyethylene (cylindrical vertical with closed top) hoisted and fixed in position including S&F of suitable size inlet/outlet arrangement & other accessories complete all as specified and as directed.

S & F in repair single lever exposed shower mixer with provision for connection to exposed shower pipe & hand shower with connecting legs and wall flange complete all as specified and directed

S & F brass chromium plated overhead shower square ( 150mmx150mm) with rubit cleaning system with suitable shower arm 300mm length complete all as specified and directed

S & F table top basin of size 590x440x135mm vitreous china white including waste coupling complete all as specified and directed

M&L for 20mm thick Granite Jet Black shade machine cut machine polished work in steps, jambs, pillars, Window-cills CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade in single piece, (cut to size in rectangular/square shape) including necessary grouting and fixing with wall for table top basin fixing complete all as specified and as directed.

S & F in repair 15mm bore, brass CP single lever basin mixer, screwed down, screwed for iron pipe complete all as specified and as directed.

S & F in repair 15mm bore, brass CP single lever sink mixer, screwed down, screwed for iron pipe complete all as specified and as directed.

S & F in repair health faucet brass body with wall hook and 1Mtr SS pipe complete all as specified and as directed.

S&F in repairs vitreous china wash down water closet pan with integral flushing cistern and seat cover single piece including connection to drain (or outgoing pipe) including all accessories for fixing and making the seat fully functional etc. complete all as specified and directed.

S & F in repair PVC waste pipe with socat suitable for connection to waste fittings of 32/40mm dia, and of length minimum 75cm complete all as specified and directed.

S & F towel rack 600mm long with lower hanger complete all as specified and directed.

S & F chromium plated towel ring of 200mm dia of ring complete all as specified and directed.

S & F PTMT mirror cabinet of size 380x450mm best quality conforming to sample kept in GE office complete all as specified and directed.

S & F in repair glass sheet shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated brackets guard and railing 60cm long complete all as specified and directed.

S & F in repair corner glass shelf (25cm/30cm) with CP brass bracket & railing etc; complete all as specified and directed.

S & F in repair soap dish stainless steel 150mm x 150mm x 1mm thick as per sample available in AGE B&R-I complete all as specified and directed.

S & F in repair Toilet paper holder recessed type stainless steel as per sample kept in AGE B&R office complete all as specified and directed.

S & F in repair 75mm bore of pipe PVC (SWR) pipes single socket in any length with rubber ring joint laid in treanches or in floor complete all as specified and directed.

S & F 75mm bore, PVC (SWR) fittings such as bens etc; fixed to PVC pipes, complete all as specified and directed.

S & F in repair 110mm bore of pipe (SWR) pipes single socket in any length with rubber ring joint fixed to walls with MS clamps etc complete all as specified and directed.

Preparation of newly plastered wall surface of any description, preparing the surfaces by mechanised sander having suction vacuum bag using smart periodical methodology complete all as specified and applying the following :- (a) Applying wall care putty in two coats on wall surface and smoothening the surface with sand papers/ Mechanised sander etc prepatory to paint. (b) Two coats of acrylic emulsion distemper over a coat of acrylic emulsion internal primer by using Airless spray / Roller over complete all as specified and directed. Note:-Contractor may use manual scraping tools for surface prepration with prior written approval of Engr-in-Charge in case of using of Mechanical equipment are not possible.

Preparation of newly plastered wall surface of any description, preparing the surfaces by mechanised sander having suction vacuum bag using smart periodical methodology complete all as specified and applying the following :- (a) Applying wall care putty in two coats on wall surface and smoothening the surface with sand papers/ Mechanised sander etc prepatory to paint. (b) Two coats of exterior acrylic emulsion distemper over a coat of acrylic emulsion external primer by using Airless spray / Roller over complete all as specified and directed. Note:-Contractor may use manual scraping tools for surface prepration with prior written approval of Engr-in-Charge in case of using of Mechanical equipment are not possible.

M & L for preparing of plastered or unplastered old decorated surfaces of ceiling by brooming down or steel wire brushing, scraping down smoke soot, moulds, mass and efflorescent, salt and trading oil and greasy spouts and applying one coat of white wash including cornices etc. complete all as specified and directed.

M & L for preparing of plastered or unplastered old decorated surfaces of wall by brooming down or steel wire brushing, scraping down smoke soot, moulds, mass and efflorescent, salt and trading oil and greasy spouts and applying one coat of white wash including cornices etc. complete all as specified and directed.

Complete removal of existing treatment on old wall surfaces of any description, preperation of surface by Mechanised sander having suction vaccum Bag using Smart Periodical methodology, complete all s spfd and applying the following :- (a) Applying wall care putty in two coats on wall surface and smoothening the surface with sand papers/Mechanised sanding etc prepatory to paint. (b) Two coats of acrylic emulsion distemper over a coat of acrylic emulsion internal primer by using Airless spray / Roller over complete all as specified and directed. Note : Contractor may use manual scrapping tools for complete removal and surface prepration with prior approval of engr-in-charge in case of using of Mechanical equiment are not possible.

M&L preparaton of old decorated, plastered/unplastered or concrete surfaces on walls including cornices & pillars etc.; by brooming down, steel wire brushing; scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots, etc. applying one coat of exterior emulsion paint over wall and ceiling surfaces including cornices and pillasters etc as per manufacturer's specification & instruction complete all as specified and directed.

S&F three track aluminium powder coated vents including provision of necessary rubber gasket for fixing glass panes etc complete all as shown in drawing No. CEBT/SK-936 sheet 1/1 available in AGE B&R-I office, complete all as specified and directed. Note:- Sheet glass shall be measured and paid separately under respective item.

S&F Aluminium powder coated vents including provision of necessary rubber gasket for fixing glass panes etc as shown in drawing No. CE BT/SK-936 sheet 1/1 complete all as specified and directed. Note:- Glass panes shall be measured and paid separately under respective item.

S&F Framed work such as grills, gratings,etc., with ends of bars shouldered and / or rivetted or forged in to spikes ; framed guard bars ; barred iron doors, ladders,; framed balusters; walk ways ; railings ; and similar works conforming to Fe290, Grade E-165 complete all as specified and directed.

M & L for forming jambs/cills etc. to openings (to foregoing item), including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work,in CM (1:6) complete all as specified and directed.

S&F 250 aluminium alloy, anodised, sliding door bolt (bolt type) with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

S & F in repair 300mm mild steel ordinary rat tail rod springs, including roller & roller plate complete all as specified and directed.

Taking down carefully existing unserviceable Aluminium/copper point wiring (light, fan, socket) complete including removal of unserviceable fittings such as switches, switch-sockets, ceiling roses, etc and removing the retrieved materials from dismantling including making good the disturbed surface of walls, floors, ceilings etc to match with the adjoining work complete all as specified and directed

M&L point wiring for one light point / bell point /ceiling fan point controlled by one switch with 2.5 Sqmm (nominal area) PVC insulated, unsheathed multi strand copper conductor cable FR-LSH in and including concealed PVC conduit 20 mm dia, medium duty, ISI marked including new, steel terminal sunken boxes and 3mm thick phenolic laminated sheet top cover for sunken boxes flush to surface for one light point, fan point , controlled by one switch on the same board with other switch or independent including PVC insulated unsheathed 2.5 Sqmm multi stranded copper conductor cable FR-LSH connected to common earth dolly complete including cutting, chasing the surface and then making good the same in CM (1:3) and finishing the surface to match with existing surface etc complete all as specified and directed by Engineer-in-charge. (Note :- Switches, sockets etc shall be measured and paid for separately under appropriate items of Sch 'A' ).

All as per item No 183 but socket 3 pin 5 Amp 230 volt flush type on same board.

All as per item No 183 but one socket point out let 3 pin 5 Amp in independent board.

All as per item No 183 but one light point controlled by two two way switch

All as per srl item No. 183 (here-in-before) but for one socket outlet 6 pin, 15 Amp with cable of 2.5 Sq mm, multi stranded copper conductor FRLSH cable on the independent board including provision of 2.5 Sq mm PVC insulated unsheathed with single core, multi stranded copper conductor FRLSH cable as earth wire to common earth & connecting to earth dolly complete all as specified and directed by Engineer-in-Charge.

Supply and fixing switch piano, flush type, single pole, one way 5 Amp complete all as specified and directed.

Supply and fixing switch piano, flush type, single pole, one way 15 Amp complete all as specified and directed.

Supply and fixing switch piano, flush type, single pole, two way 5 Amp complete all as specified and directed.

Supply and fixing Socket outlet 3 pin, 5A, flush type complete all as specified and directed.

Supply and fixing Socket outlet 2 in 1, 3 pin, 5Amp and 15 Amp, flush type complete all as specified and directed.

Supply and fixing stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc,. complete all as specified and directed.

Supply and fixing ceiling rose, 3 terminal PVC/polycarbonate, suitable for 230 V, AC, 50 Hz supply. complete all as specified and directed.

S & F LED light fitting 1x20 watt, 230 V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

S & F Lamp holder PVC/Polycabonate type with back plate complete all as specified and directed.

S & F LED Bulb 7W for Lamp Holder complete all as specified and directed.

S & F in repalacement sub main two single core PVC copper conductor unsheathed wire multi standed 6.0 Sqm in existing surface / recessed PVC/ steel conduit and 6 Sqm copper condutor single core completed by common earth complete all as specified and directed. (Note :- Two length of 6.0 Sqmm cable and one length of 6.0 Sqmm earth cable along with PVC conduit will be measured as one running length)

S&F sheet metal encloser double door 12 way SPN 240V ISI marked complete with neutral and earth link and bus bar complete made out of CRCA steel sheet Factory made including blanking plate for unused module complete all as specified and directed

All as per item No. 199 but 04 Way TPN 415 volt complete all as specified and directed

S&F MCB 6-32 Amp 240V SP 10 KA ‘C’ series complete all as specified and directed

S&F MCB 40-63 Amp 240V SPN 10 KA ‘C’ series complete all as specified and directed

S&F in repair MCB 415V 40 to 100Amp TPN 10 KA ‘C’ series complete all as specified and directed

M & L for earthing with galvanized steel plate electrode 600 x 600 mm x 6.3 mm size directly burried in ground vertically to earth pit not less than 2.25 meter deep below normal ground level with top edge of the earth plate not less than 1.5 m below normal ground level surrounded with coal dust and common salt filling in alternative layers of 15 cm thick Each connected to and including GI earth wire 4 mm dia by means of nuts, bolts, check nuts & washers etc connecting to earthing test point, main switch board and including 15 mm dia GI pipe light grade for protection of earth lead from earth plate to distribution board and 20 mm dia GI pipe medium grade connected with funnel having wire mess for watering purpose including necessary excavation and earth work, PCC (1:2:4) type B-1 (using stone aggregates) for earthing pit, 10mm thick cast iron cover with angle iron frame all as specified and shown in electrical plate No 3 of SSR Part-I and testing on completion including replacement of old unserviceable.

S&F in repair LED street light fitting 35 Watt 230V AC outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver, lamp bracket with impact and corrossion resistant complete with IP 65/66 protection, including fixing with GI/MS bracket made out of suitable size of light grade tube with suitable length bent to shape with 02 sets of MS clamps made out of minimum 3 mm MS flat iron with suitable bolt and nuts complete with making connection complete allas specified and directed

Taking down carefully existing ceiling fans 1200/1400mm sweep from site, deposit safely to E/M yard and refixing the fan to respective place as and when directed by Engr-in-charge including carrying out minor repair like cleaning all the components of fan, including replacement of nuts, bolts, split pin, rubber reel, capacitor 2.5mfd & including 3 core PVC insulated PVC sheathed copper conductor flexible cable 1.5 sqmm from ceiling rose to fan and painting the fans complete all as specified and directed.

M & L for point wiring with 1.5Sqmm single core PVC insulated cable 1100V grade with multistranded copper conductor drawn through and including suitable non- metallic rigid PVC conduit and all conduit accessories (concealed), fixed on walls, roofs, floors etc and including provision of 1.5 sqmm PVC insulated copper cable as earth continuity conductor, modular metal flush box concealed in walls, with modular top cover plate with frame for housing switches, socket outlets, fan regulators etc, complete all as specified and directed for the following:-

One light point / fan / exhaust fan controlled by one switch

One 3 Pin socket outlet 5 amp on same board

One 3 pin socket outlet 5 Amp independent

All as per srl item No. 207 but for one 3 pin socket outlet 15 Amp independent with cable of size 2.5 sqmm for point wiring and 2.5 sqmm as in contineous earth wire

Materail and labour for sub main wiring complete with 2 run 4 sqmm, single core 1100 votls grade, PVC insulated, multi stranded copper conductor cable FRLSH with continuous copper earth conductor of 4 Sqmm in existing PVC concealed conduit including taking down old unserviceable wiring complete all as specified and directed. (Note :- Two length of 6.0 Sqmm cable and one length of 6.0 Sqmm earth cable along with PVC conduit will be measured as one running length)

S & F moduler switch one way 6A, 1 module complete all as specified and directed

S & F modular socket, 6A - 2/3 pin combined 2 module complete all as specified and directed

S & F ceiling rose surface PVC/polycorbonate, isolated body with three terminals complete all as specified and directed

S & F PVC ventilation fan 200mm including fixing of mounting frame in the hole cutting in the wall of brick/stone masonary by means of rugged bolts, nuts and washers etc & making good disturbed surfaces of wall etc; including provn of louver shutter on outer surface of the wall and connecting with and including three core copper conductor flexible cord of 0.5 Sqmm cross sectional area of required length from rose to the porcelain connector block of the exhaust fan complete all as specified and directed

S & F electric water heater, storage type steel body with copper inner tank and heating element upto 2KW capacity 25 ltr, BEE 5 star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc. complete all as specified and directed

S & F ceiling fans 1200mm sweep complete with blades, down rods, electronic regulator and accessories, 230V, Min air delivery 210 CFM with service value 6.00 BEE five star rated with brushless direct current motor (BLDC) complete all as specified and directed

S & F single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amp complete all as specified and directed

S & F REGAL batten for LED tube with single LED lamp 1x20w, ultra bright glass LED Tubelight with very high efficancy suited for installation in T5/T8 fitting with lamp holders etc. complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed

S & F Decorativ ultra slim LED 10 watt lighting fixture with extruded polycarbonate, environmental friendly, energy efficient complete all as specified and directed

S & F Decorative wall light with LED Bulb 9 watt complete all as specified and directed

Taking down carefully existing ceiling fan / exhaust fan and geyser from qtrs, depositing to AGE E&M store yard complete all as specified and directed

Note:- Net contract sum shall be calculated after deduction of Sch of credit.

SAHIL CONSTRUCTIONS

M/S BHAGWATI CONSTRUCTION COMPANY

Aman Enterprises

SHARDA ENTERPRIES

RAMA AUTOS