Immediate measures to restore flood damages of Balijan ghat for 2020-21. RETENDER

Amount

Medium Jungles: Clearing medium jungles and trees upto 15 cm. girth including cutting, uprooting roots and stumps, removing them from the site of the work, etc. complete as directed. (When 30% to 60 % of the area is covered by shrubs, trees etc).

Earthwork in bank trimming to the designed section /slope including removing the soils at a safe distance, complete as directed.

Supply of Geo-textile bags of type-A (size 1.03X0.70M), inner dimension made of Geo-textile non-woven fabric sheets of 400 GSM manufactured from 100% virgin Polypropylene (PP) fibre having thickness not less than 3.00 mm with minimum properties as (i) Tensile strength (CD) ≥ 24 KN/m (ii) Tensile strength (MD) ≥ 22 KN/m (iii) Mass ≥ 400.00 Gm/m ² (iv) CBR Puncture strength ≥ 4100 N/m2 (v) Elongation @ break (Warp) ≥ 54% (vi) Elongation @ break (Weft)≥ 52% (vii) Abrasion ≥ 70 % (viii) UV Resistance @ 500 hours ≥ 70% (ix) AOS ≤ 75 micron (x) Permittivity ≥ 1.25, (xi) Trapezoidal Tear Strength ≤ 520 N (xii) Permeability = 45Lt/m2/sec (xiii) Seam strength = 80 % of geotextiles strength . Stitching of Bags should be Ring Spun Yarn stitches with 2500-3000 denier double line chain stitch with overlap with stitches along the edge @ minimum 15 stitches per 100 mm. (Bags are to be supplied of 100 numbers or part in a bundle, properly packed with name of Manufacturer and Batch Number is to be marked on each bag with “WRD Govt of ASSAM” to be printed on each bag and mentioning properly the GSM and type of Geo bag polymer. Test Certificate from approved NABL accredited and ISO Certified Laboratory should invariably be submitted against each batch of material). FOR GUWAHATI.

Supply of Geo-textile bags of Type-B (Size 2.00m x 1.50m), inner dimension made of composite layers of geo-textile as per specifications below : Woven Geo-textile for the outer cover. The woven geo textile is woven with UV resistant slit film tape fibre with MAVR values of the following properties. Geo-textile used to manufacture geo-textile bags should have high mechanical properties for enhanced durability along with enhanced puncture, abrasion and U.V. resistance characteristics. Geo-textile should be inert to biological degradation and resistant to naturally encountered chemicals, alkalis, and acids.  Weight (ISO-9864/ASTMD 5261) ≥250 Gms/Sqm.  Tensile strength(MD) ( ASTMD 4595) ≥35 KN/m  Tensile strength(CD) ( ASTMD 4595) ≥35 KN/m  Tensile Elongation ( ASTMD 4595) ≥5% & ≤30%  Grab Elongation ( ASTMD 4632) ≥5% & ≤30%  Tensile strength ( ASTMD 4632) = 1.5 KN  UV resistance( ASTMD 4355) = 70%/500 hrs Non woven Geo-textile for the inner layer It is needle punched non woven geo-textile made of 100% polypropylene staple fibers which are formed into a random network for dimensional stability. It should resist UV degradation, rotting and alkalis.  Weight (ISO-9864/ASTMD 5261) ≥300 Gms/Sqm.  Tensile strength(MD) ( ASTMD 4595) ≥12 KN/m  Tensile strength(CD) ( ASTMD 4595) ≥12 KN/m  Tensile Elongation ( ASTMD 4595) ≥5% & ≤30%  Grab Elongation ( ASTMD 4632) ≥5% & ≤30%  Tensile strength ( ASTMD 4632) = 1.5 KN  UV resistance( ASTMD 4355) = 70%/500 hrs (Bags are to be supplied of 100 numbers or part in a bundle, properly packed with name of Manufacturer and Batch Number is to be marked on each bag with “WRD Govt of ASSAM” to be printed on each bag and mentioning properly the GSM and type of Geo bag polymer. Test Certificate from approved NABL accredited and ISO Certified Laboratory should invariably be submitted against each batch of material).FOR GUWAHATI

Supply of non-woven Geo-textile fabric sheets of 300 GSM manufactured from 100% virgin Polypropylene (PP) fibre with minimum properties as (i) Tensile strength ≥ 12 KN/m (ii) Mass ≥ 300.00 Gm/m ² (iii) CBR Puncture strength ≥ 3.5 KN (iv) Elongation at break ≥ 60% (v) Abrasion ≥ 70 % (vi) UV Resistance @ 500 hours ≥ 70% (vii) AOS ≤ 75 micron (ix) Permittivity ≥ 1.25, (x) Trapezoidal Tear Strength ≤ 340 N (xi) Permeability = 2.00 x 10 ̄ ³ m/sec (xii) Seam strength = 80 % of geotextiles strength . Stitching of Bags should be Ring Spun Yarn stitches with 2500-3000 denier double line chain stitch with overlap with stitches along the edge @ minimum 15 stitches per 100 mm. (Each Roll of Geo Fabric Sheet should be supplied in properly packed Bundles and should be marked with the Name of Manufacturer & Batch Number clearly on each bundle with “WRD Govt of ASSAM” to be printed on it and mentioning properly the GSM and type of polymer and Test Certificate from approved NABL accredited and ISO Certified Laboratory should invariably be submitted against each batch of material).FOR GUWAHATI

Construction and supply of Wire -netting box of size 1.50mx 1.50mx 0.45m made with mechanically woven, double twisted , hexagonal shaped wire mesh with wire made of low carbon, high ductile MS wire with heavy class of galvanization with an additional layer of PVC coating with mesh type of 10x12 as per EN 10223 & ASTM A975 , mesh wire of 2.70mm (I.D)/3.70mm(OD)tensile strength of 450-500/mm²,edge wire/selvedge around it at least 2.5 times, lacing wire (zink P.V.C. coated) of 2.20mm (I.D.) /3.20mm (O.D) P.V.C. coating thickness of 0.50mm nominal, 0.38mm minimum and with average weight per unit being 12 kg with additional 3% of the weight of box for lacing wire supplied separately, supporting the facing of the box with Zink coated steel wire of required length as directed, compling with A.S.TM and Europian norms, including payment of all duties,sale tax, any other taxes as applicable loading, unloading and staking them at the site of work in measurable stacks, complete as directed .

Construction and supply of Wire-netting box of size 1.5m x 1.50m x 0.50m made with mechanically woven, double twisted, hexagonal shaped wire mesh with wire made of low carbon, high ductilc MS wire with heavy class of galvanization with an additional layer of PVC coating with mesh type of 10 x 12 as per EN 10223 & ASTM A975, mesh wire of 2.70 mm(I.D)/3.70mm (OD) tensile strength of 450-500/mm2, edge wire/selvedge around it at least 2.5 times, lacing wire (zink P.V.C. coated) of 2.20mm (I.D.) /3.20mm (O.D.) P.V.C. coating thickness of 0.50mm nominal, 0.38mm minimum and with average weight per unit being 12 kg with additional 3% of the weight of box for lacing wire supplied separately, supporting the facing of the box with Zink coated steel wire of required length, compiling with A.S.TM and European norms, including payment of all duties, sale tax, any other taxes as applicable loading, unloading and staking them at the site of work in measurable stacks.

Supply of Sewing Thread/Yarn PPMF Stitching Thread (2000 Den. Kaplon) i/c payment of taxes.

Collection and supply of River silt by truck carriage free from debries and other foreign material payment of forest royalty if any, etc. (For initial Lead beyond 1/2 Km and upto 4.00 km for all lifts).

Carriage of Geo Bags of size 1.03 x 0.70 m including loading & unloading , Stacking cost of P.O.L. ,etc. complete and including hire charge of truck with driver and handyman completed as directed. (Distance to be calculated with respect to FOR Guwahati)

Carriage of Geo Bags of size 2.00 x 1.50 m including loading & unloading , Stacking cost of P.O.L. ,etc. complete and including hire charge of truck with driver and handyman completed as directed. (Distance to be calculated with respect to FOR Guwahati)

Carriage of 300 gsm Geo sheet of including loading & unloading , Stacking cost of P.O.L. ,etc. complete and including hire charge of truck with driver and handyman completed as directed. (Distance to be calculated with respect to FOR Guwahati)

Labour charge for laying Geo fabric sheet as filter bellow pitching including anchoring and complete as directed.

Filling and laying of Geo bags of size 1.03m X 0.70m including excavation of silt from flood plain or adjacent chars within a distance of 90m of the work site, filling geo bags with silt having minimum weighing 126.00Kg and minimum volume 0.084 cum after filling, double locking chain stitching the mouth of the filled bags with polypropylene thread by power driven double needle double stitched machine, stacking the same in batches of 100, carrying the same to the dumping site including all handling charges and local carriage within a distance of 150m and laying properly as directed. (Geo Bag and Polypropylene thread will be supplied by the department free of cost). With Boat

Filling and laying of Geo bags of size 1.03m X 0.70m excluding excavation of silt from flood plain or adjacent chars within a distance of 90m of the work site, filling geo bags with silt having minimum weighing 126.00 Kg and minimum volume 0.084 cum after filling ,double locking chain stitching the mouth of the filled bags with polypropylene thread by power driven double needle double stitched machine, stacking the same in batches of 100, carrying the same to the dumping site including all handling charges and local carriage within a distance of 150m and laying properly as directed. (Silt, Geo Bag and Polypropylene thread will be supplied by the department free of cost). Without Boat

Filling and laying in cage with silt filled Geo bags of size 1.03m X 0.70m excluding excavation of silt from flood plain or adjacent chars within a distance of 90m of the work site, filling geo bags with silt having minimum weighing 126.00 Kg and minimum volume 0.084 cum after filling ,double locking chain stitching the mouth of the filled bags with polypropylene thread by power driven double needle machine, stacking the same in batches of 100, carrying the same to the dumping site including all handling charges and local carriage within a distance of 150m and laying properly. in cages made of wire netting sheets of size 2.57x1.66m of 8G galvanized wire making the cage from 2 nos. of wire netting sheet by tying the projected wires complete as directed. (Silt, Geo Bag, Wire Netting Sheets and Polypropylene thread will be supplied by the department free of cost). Without Boat

Filling and laying of nonwoven Geo-textile bag of dimension 2.00mx1.50m including excavation of silt from flood plain or adjacent chars within a distance of 90m of the work site, filling geo bags with silt, having minimum volume 0.612 cum after filling,double locking chain stitching the mouth of the filled bags with polypropylene thread by power driven double needle machine, laying at proper site including all handling charges and local carriage within a distance of 100m complete as directed. (Geo Bag and Polypropylene thread will be supplied by the department free of cost). With Boat

Providing and laying Pitching on slopes laid over prepared filter media including boulder apron laid dry in front of toe of embankment complete as per drawing and Technical specifications Cement Concrete blocks of size 0.3x0.3x0.3m cast in cement concrete of Grade M15

Providing and laying Pitching on slopes laid over prepared filter media including boulder apron laid dry in front of toe of embankment complete as per drawing and Technical specifications Cement Concrete blocks of size 0.3x0.3x0.25m cast in cement concrete of Grade M15

Earth work in excavation of drainage channel to the proper grade and slopes as required including desposing the excavated debries/soil to a safe distance of minimum 50 m distance as directed. Normal Soil

Hire charge of engine boat with minimum 10 HP engine and load carrying capacity of not less than 3.00 ton along with operator and helpers excluding cost of P.O.L..

Supply of G-Mat in double layered composite Geo-textile fabricated to form a three dimensional mattresses , the upper layer of the mattress being heavily woven with polypropylene fabric needle-punched with a mixture of U.V. stabilized green fibres and cut tape yarns with Upper Layer Properties as 1) Mass per unit area > 650 GSM, 2) Tensile Strength(MD) ≥ 70kN/m, 3) Tensile Strength(CD) ≥ 70kN/m 4) Tensile Elongation(MD) ≤ 25%, 5) Tensile Elongation(CD) ≤ 25%, 6) Pore Size < 0.35mm,7) Abrasion Resistance ≥ 35 %, 8) UV @ 500 hours ≥ 90% 9) Resistance to Oxidation @ 100°C for 28 days) ≥ 80% and Lower Layer Properties as 1) Mass per unit area > 400 GSM, 2) Tensile Strength(MD) ≥ 110kN/m, 3) Tensile Strength(CD) ≥ 90kN/m 4) Tensile Elongation(MD) ≤ 25%, 5) Tensile Elongation(CD) ≤ 25%, 6) Pore Size < 0.35mm,7) Abrasion Resistance ≥ 60 %, 8) UV @ 500 hours ≥ 90% 9) Resistance to Oxidation @ 100°C for 28 days) ≥ 80% . The sewing thread should be of high tenacity polyester and parallel stitches are to be continued positioned at 350 mm apart with a stitch length not exceeding 5 mm. (Each roll of G-Mat should be supplied in properly packed bundle and should be marked with the Name of Manufacturer & Batch Number clearly on each bundle with “WRD Govt of ASSAM” to be printed on it and mentioning properly the GSM( for both upper and lower layer) and types of polymer( for both upper and lower layer) and Test Certificate from approved NABL accredited and ISO Certified Laboratory should invariably be submitted against each batch of material) FOR GUWAHATI (With 29 % Custom Duty)

Carriage of Geo Mat of including loading & unloading , Stacking cost of P.O.L. ,etc. complete and including hire charge of truck with driver and handyman completed as directed.(Distance to be calculated with respect to FOR Guwahati)

Labour charge for laying, fitting and fixing of double layered Geo textile, fabricated to form a three dimensional mattresses after filling sand at design slope, filled up with sand by pump, anchoring by cutting trench at the upper and lower end of slope of depth 1.00m x 0.75 m placing the mat by bending it into the trench, filling the trench by earth filled cement bags, sides of mattresses in sloping direction stitched by Polypropylene thread with double locking chain stitch not less than 3 stitches per 2.50 cm to achieve minimum stream strength including all handling and carriage charge complete as directed. (Polypropylene thread will be supplied by the department free of cost).

Supply of Coarse sand for tubular Geo Mattresses filling

Supplying, fitting and fixing RCC guard post 150cm long erected 75cm above the ground and 75cm below the ground with M-15 grade (nominal mix 1:2:4 with broken stone aggregate up to 20mm size) of cement concrete and required reinforcement tied in position with annealed black wire including centering, moulding the top, curing including painting concrete surfaces in 23cm strips upto 0.75m from the top alternately in black and white and having 2 nos. reflective band of desired shade etc. complete as per design and as directed. 15 cm dia. RCC guard post with reinforcement of 4nos. 12mm dia TMT main steel bars and 6mm TMT/ MS stirrups at 15cm c/c.

Construction of temporrary shed of two roof with mud plinth of 0.45 m height above ground level with Bhaluka bamboo post 1.5 m apart driven at atleast 0.75 m below ground and height above plint 2.5m. Split Jatti bamboo wall mud plastering white washing 2 coats, 10 cm thick touch roofing over bamboo rua frame placing at 0.15 m clear apart fitted with bamboo kamies from binding doors and windows with Bamboo Chattai strengthening with Bamboo frame binding with wire etc compple as directed. (Using Bhaluka Bamboo at the rate of 6.00 nos/ Rm & Jati Bamboo at the rate of 61.00nos / Rm).

Supply of Ordinary Labour inclusive of all taxes

NK AGARWALLA