PROVN OF TILING AND ALLIED WORKS IN CERTAIN SMQs AT SUBROTO PARK AND PROVISION OF SECURITY GRILL FOR VARIOUS OFFICES OF AFRO AND SNCOS MESS TREASURE OFFICE AT SUBROTO PARK

Amount

Roughing surfaces of old concrete floor by picking sweeping clean and washing down with water to remove dust etc complete all as specified and directed

M&L for brushing neat cement slurry with 3.0 Kg of cement pe sq meter complete all as specified and directed.

M&L non skid ceramic coloured tiles 7 to 8 mm thick joint free tiles (square/rectangular) area of each tiles exc 0.11 sqm but n. exc 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match over 15 mm thick screed bed or bedding layer in cm (1:6) complete all as specified and directed.

M&L Glazed coloured ceramic tiles in vertical surface/ dado 350x 250x 7mm / 450X 350X 7mm mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed.

Taking down cement plaster etc on brick wall or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc and disposed off unserviceable materials to out side MOD land complete all as specified and as directed.

M&L 12 mm thick cement mortar 1:6 on unven surface of brick work or concrete surfaces on wall surface even and smooth without using any extra cement complete all as specified and directed.

M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:3) as in ceiling, complete all as specified and as directed.

M&L 15 mm thick cement mortar 1:4 on other than fair faces of brick work or concrete surfaces on wall surface even and smooth without using any extra cement complete all as specified and directed.

M & L Preparation of newly plastered or unplastered surface and applying two coats of distemper oil emulsion on walls complete all as specified and directed.

M & L preparation of newly plastered surface and applying three coats of white wash on ceilings complete all as specified and directed.

M&L Preparation of newly plastered or unplastered surface and applying two coats of exterior weather proof (coat) paint on plastered/concrete surfaces of walls, paths , etc., over a coat of primer complete all as specified and as directed by the Engineer-in-Charge.

M&L for complete removal of existing treatment of old decorated surfaces of walls by steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and washing, rubbing down and stoping of existing surface and making the surface even and smooth and apply Two coats of distemper oil emulsion on walls complete all as specified and directed.

M&L Green marble 18-20 mm thick machine cut , bedded jointed and pointed with grey cement slurry including cutting and polishing Complete all as specified and as directed.

Taking up or down 15mm bore steel tubing and connections, including cleaning for re- fixing or removal to store complete all as specified and as directed.

S&F 15 mm bore steel tubing galvanized medium grade with all fittings and fixed concealed to walls and ceiling or laid in floors complete all as specified and as directed.

S&F brass chromium plated shower rose 125 mm size with swivel joints including fixing to pipe complete all as directed

S&F 15 mm dia bore CP wall mixture with all accessories complete all as specified and as directed.

S&F 15 mm dia bore two in one bib cock with all accessories complete all as specified and as directed.

S&F Hand Shower (Health Faucet) with 1 Meter Long Easy Flex Tube in Chrome Finish & Wall Hook complete all as specified and as directed by Engineer-in-Charge.

S&F 15 mm dia bib taps, cast copper alloy chromium plated with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed.

S & F 15 mm bore angle valve cast screwed down, high pressure, with crutch or butter fly handle, for iron pipe or for unions complete all as specified and directed.

S&F CP grating round 100mm dia with hole complete all as specified and as directed.

S&F in repair PVC flushing cistern, valveless, symphonic action type, 10 Ltr capacity, low level, white, with inlet, ball valve, float and handle including bracket complete all as specified and as directed.

S&F PVC connection of 45 cm long with 2 Nos PTMT side nuts screwed with iron pipe of 15 mm dia complete all as specified and as directed.

S&F in repairs vitreous china wash down water closet pan (Pedestal pattern) excluding flushing cistern and flush pipe and including P or S trap and seat cover complete all as specified and as directed by Engineer-in-Charge.

S&F plastic water closet seat cover white closed pattern with flat bottom and cover incl mild steel chromium plated hinging device complete all as specified and as directed by Engineer-in-Charge.

S&F in repair PVC floor trap 75mm with grating icluding jointing with solvent complete all as specified and as directed.

S& F 75 mm bore PVC (SWR ) pipe single socketed in any length with rubber ring joints, laid in trenches or in floors etc complete all as specified and directed by Engr - in- charge.

S&F PVC (SWR) bends any radius for 75 mm bore PVC pipe with cement joints complete all as specified and as directed.

S&F in repair vitreous china WHB white, flat back, size 550 x 400mm including brackets ,cupling and all accessories etc complete all as specified and as directed

S & F Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed

Taking down door chowkats or frames with shutters, any type (without taking off shutters from the frame) area not exceeding 1.50 sqm complete all as specified and directed.

S&F factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with mild steel square tube complete all as specified and directed.

S & F factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes for top and bottoms rails MS frame shall be covered with heat moulded plain colour PVC C Channel having a PVC sheet strip of 20 MM width stuck in side with solvent cement for stiles and plain colour PVC sheet for top rail lock rail and bottom rail in either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded and sealed to the styles and rail with suitable PVC sheet beading and joint together with solvent cement, complete as specified and as directed.

S&F 100 mm long butt hinges medium weight cold rolled mild steel alloy with galvanized complete all as specified and directed.

S&F 100 mm long Aluminium handles, cast type, anodised complete all as specified and directed.

S&F of 100 mm long Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S & F aluminium deco grills conforming to DG-104 grade all as specified and directed by Engineer-in-Charge.

S & F for aluminium power coated frame work any colour (minimum thickness of power coating 50 micron) for doors, windows, ventilators with one or more rebates including joining cleats for fixing etc complete all as specified and dirceted

S & F for aluminum power coated any colour (minimum thickness of power coating 50 micron) aluminium window and ventilator shutters, sliding type, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and directed

S&F powder coated aluminium door shutters, (minimum thickness of powder coating 50 micron) aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, powder coated aluminum snap beading screws etc. complete all as specified and directed

S&F 5.5mm thick plain glass ordinary quality and glazing, suare exc 0.50 sqm in each pane as in doors etc complete all as specified and directed

S& F 9mm thick prelaminated particle board, interior grade, prelaminated on both sides with decorative choice lamination all as specified

S & F in repair aluminium extruded section door closer hydraulically operated designation No-03, universal type, suitable for door shutters of 851 to 1000mm width and of weight of 61 to 80 Kg complete all as specified and directed by Engr In Charge.

S&F for Brass Mortice lock, vertical type, size 100mm, 4 Levers complete all as specified and dirceted

Atish Builders LLP (BID ID -3319493)

J S CONSTRUCTION CO (BID ID -3327487)

shakti construction (BID ID -3319917)

J D ENTERPRISES (BID ID -3320283)