Extension of MRT 2 Lab and AVR and GRP Lab Building in 21.50 m Floor Eastern Wing in Power House Building at Unit 5

Chipping the existing concrete and roughening the surface for future bonding and thorough cleaning the surface including cost of all materials, labours, lead, lift, curing, etc. complete.

Dismantling the existing brick masonry for the required height including cost of all materials, labours, lead, lift, curing, etc. complete.

Dismantling the existing steel doors & windows including removal of frames, hinges & fastenings, including cost of all materials, labours, lead, lift, devolution to stores, etc. complete.

Dismantling the existing pressed tiles & Weathering course including cost of all materials, labour, lead, lift, curing, etc, complete.

Providing HILTI joint arrangements to the rods by drilling holes into the old concrete and new concrete to a required depth and injecting motor HIT -RE 500 @ 0.50ml./mm chemicals, rate including the cost of chemical, drilling arrangements, labour charges, lead, lift, etc., complete

Providing PCC 1:3:6 using OP/PP cement with 20 mm size machine crushed HBG metal including cost of all materials, labours, lead, lift, curing, etc. complete

Brick work in CM 1:5 using Fly Ash bricks including cost of all materials, labours, lead, lift, curing, etc. complete

Providing centering and shuttering arrangements for supporting the reinforced cement concrete surfaces rate including cost of all labour, lead, lift, etc., complete.

Providing shuttering arrangements for supporting the reinforced cement concrete surfaces rate including cost of all labour, lead, lift, etc., complete.

Providing RCC 1:1.5:3 using OP cement with 12 to 20mm HBG metal including cost of all materials, labours, lead, lift, tools, curing etc. complete. excluding cost of formwork and reinforcement.

Supplying fabricating and fixing in position of RTS rod for reinforcement including cutting bending tying and fixing in position including cost of all materials, labour, binding wire, lead, lift, tools etc., complete.

Plastering with CM 1:5, 12mm thick including cost of all materials, labour, lead, lift etc., complete.

Special ceiling Plastering with C.M 1:3, 10 mm thick including cost of all materials, labours, lead, lift, curing, etc. complete

Terrace flooring (weathering course) with one course of pressed tiles 200x200x20mm over CM 1:3, 20mm thk mixed with crude oil 10% by weight of cement and pointing with the same oiled mortar over a bed of 80 mm thick concrete broken brick jelly 20mm in pure slacked lime with required slope over RCC roof slab including cost of all materials, labours, lead, lift, curing, etc. complete

Providing and fixing steel door of required size with single leaf, frame using 30x30x5mm M.S.angle shutters with 30x20x3mm M.S.angle and flat 4x5mm for door sfiffner center portion 20x5mm for shutter stiffner horizontal and 16x5mm for door stiffner outer vertical and horizontal with 2mm thick M.S.Sheet both sides made with 2 no. tower bolt, 1 no. aldrop, 2 no. handles, 3 nos. hinges with cost of all materials lead lift etc., complete including two coats of approved quantity enamel paint over the prining coat of red oxide.

Supplying fabricating and fixing in position double leaf steel window with 2mm M.S Sheet and 8mm dia Rod 12cm c/c with window stopper locking facilities etc., complete including cost of materials labour lead lift etc., complete.

Supplying and fixing of PVC panelled door shutters hollow type 200 mm x200 mm panel with 1 mm wall thickness for panels and styles and rails of suitable size with 2 mm wall thickness suitably reinforced using MS angle / Flat including cost of necessary Aluminium Hinges and other furniture fitting.

Supplying and fixing European Water closet of approved quality and colour and 'P' or 'S' trap with Double Flapped seat and seat cover with Brass Hinges and 10 Litre capacity Flusing tank including cost of all materials, labours, lead, lift, curing, etc. complete.

Supplying and fixing wash basin of size 550x400mm with all accessories such as cast iron brackets, 32 mm dia C.P waste coupling, rubber plug & chain, 32mm dia. B class G.I wasre pipe, 15mm dia. G.M wheel valve, 15mm dia. neylon connection, 15mm dia. brass nipples, 15mm C.P pillar tap, mirror including cost of all materials, labours, ESI & EPF charges, lead, lift, curing, etc. complete.

Replacing the damaged Urinal and fixing of New Porcelin Urinal with all accessories such as 32mm dia. Bell mouth, PVC connection, 15mm dia. GM wheel valve, 15mm dia. B class GI waste water pipe, 15 mm dia. neylon connection, 15mm dia. brass nipple, etc. including cost of all materials, labours, ESI & EPF charges, lead, lift, curing, etc. complete.

Providing and fixing in positin of aluminium anodized glazed single leaf door with inner frame section using 45x45x2mm for top and middle and vertical, door frame section using 100x45x2mm for door and shutter bottom with 5mm thick plain glass with sun control flim on top and bottom using aluminum anodized beading with all necessary standard hardwires such as handle, tower bolts, safety rod with full thread locking arrangement hardware make or equivalent hydraulic door closer with double speed adjustment including 1 No etc., complete including cost of all materials labour, lead, lift etc., complete.

Providing and fixing in position of new anodised aluminium windows of approved manufacture with aluminium 65x38x2.50 mm as main outer frame and inner frame with section 62x30x1.50 mm for top sides and bottom and shutter frame with section 39x19x1.50 mm for vertical plain inter lock and bottom etc including all fittings/ fixture confirming torelevent IS to ensure smooth operation and glazzed with 5.5 mm plain glass panels as sliding type as per instruction's of site Engineer, rubber linig with standard hardwares such as special wheel maruthilock 'U' Rubber beading screws, join cleats etc., including cost of all material, lead lift, transporting including the dismantling existing broken glasses and damaged aluminium shutter from the window and devoluting the same to the stores etc., complete.

Supply and fixing floor tiles of 305 x 305 x 6mm first quality design ceramic tiles of approved colours in CM 1:3, 20mm thick and pointing with white cement 0.4 Kg/Sqm including cost of tiles labour, lead, lift, etc., complete.

Providing dadooing wall with glazed tiles of approved make first quality printed design and colour of 150 x 150mm with 6mm thick laid in CM 1:2, 10mm thick and pointing with white cement of 0.4 Kg. / Sqm. Including cost of materials labour, lead, lift, etc., complete.

Providing two coats with ready mixed plastic emulsion (interior walls) of first class quality paint & approved colour including cost of all materials, scaffolding charges, thorough cleaning of surface, labours, lead, lift, curing, etc. complete.

Providing two coats with ready mixed plastic emulsion (exterior walls) of first class quality paint & approved colour over a priming coat, including cost of all materials, scaffolding charges, labours, lead, lift, curing, etc. complete

Providing false ceiling with Thermocool 25mm thick over the Aluminium section 25 x 25 x 1.6mm (T & L angle) with 50cm c/c in one direction 100cm c/c in another direction with 6mm dia M.S. rod as stiffner at a distance of 1.25m c/c including cost of all materials, labour, lead, lift, scaffolding charges etc., complete.

Supplying and fixing 40mm thick RCC jolly of size 0.75 x 0.45m including cost of all material, lead, etc., complete.

Supplying laying and jointing in position of 15mm dia GI pipes ('B' Class) as instructed by the site Engineer rate including cost of all materials, labour, lead, lift etc., complete.

Supplying and fixing 6Kg/cm2 PVC pipe of approved quality size of 110mm dia including cost of all specials, all other materials required, labour, lead, lift, etc., complete.

Providing Cup-board Shutter with frame using termite / water proof plywood of 19mm thick over which laminated sheet of 0.8mm thick fixed inside the shutter and 1mm thick fixed in the outside of the shutter using fevicol along with necessary furniture fittings, such as, hydraulic hinges, tower bolt, handles, multipurpose locks etc., as directed by the Departmental Officers.