SPECIAL REPAIR TO DSC GAURD POST REST ROOMS UNDER GE AF LOHEGAON AT AF STN PUNE

Amount

Dismantling stone slabs or roof treatment of any description in suspended slabs in roofs,suspended floors, chajjas, landings etc,including cement mortar, bedding (But not backing ) and rubbish of premises complete all as specified and directed.

M&Lfor brushing neat cement slurry with 3.0 Kg of cement per Sq.meter. complete all as specified and directed.

M&L for10 mm thick rendering on fair faces of brick works / Concrete surfaces finished even and smooth without using extra cement in cement mortar 1: 3 complete all as specified and as directed.

M&L for PCC type B0 (1:2:4) using 12.5 mm graded crushed aggregate in Coping / Coving/padding concrete,mass concrete and the like complete all as specified and directed.

M&L for priming surfaces in moderate conditions for laying APP membrane complete all as specified and directed.

M&L App based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforment with polyster non woven fabric (wt reinforcement not less than 150 gms/sqm) laid on primed surfaced application complete all as apecified and directed. Note :- (Primer shall be measured and paid separately ).

M&L applaying two coat of Aluminium paint over APP Membrane complete all as apecified and directed.

Dismantling plain or corrugated steel /fibre/AC sheeting any guage thickness including nanital or similar pattern complete all as specified and as directed

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Dismantling unframed timber scantlings 40 sq cm and over in section ,in any position complete all as specified and directed.

S&F Second class clean sawn hard wood in scantlings complete all as specified and directed.

S & F Rolled mild steel in Compound girders and stanchions, lattic girders,posts, staging for water tanks and the like including caps, bases,splices etx. Builtup from two or more beem or channel sections or angles with plates, including all lattice bars, stifeners,gusset plates,etc. conforming to FE-410 - W(grade E-250) quality 'A' complete all as specified and directed.

S & F Plates (Plain or Corrugated) channels,square cut or notched (ordinary or counter sunk) forming holes with out any attachment conforming to FE-410 - W(grade E-250) quality 'A' complete all as specified and directed.

S & F rolled sections as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates conforming to FE-410 - W(grade E-250) quality 'A' complete all as specified and directed.

S & F Stairs (framed) including stringers, treades,landing, balusters,hand rails etc .including cleats,brackets,etc conforming to FE-410 - W(grade E-250) quality 'A' complete all as specified and directed.

S&F 0.63mm thick Galvanised corrugated mild steel sheeting with two corrugations side lap,fixed with coach screws and washers in roofs walls etc. with grade of zine coating 275 complete all as specified and directed.

S&F 0.63mm thick plain galvanised mild steel sheeting as in ridges hips, valley gutters drip and straight flashings (length and girth as fixed) with L or J hooks or coach screws with grade of zinc coating 275 complete all as specified and as directed.

M&L Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors,balusters,nosing to steps including embeding in concrete and screwing etc. wind ties for roof ,Brackets for Valley gutters ,including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 410-0 or FE 310-0 complete all as specified and directed.

Dismantling wall/floor and ceiling boards (fiber, pulp, inlsulation, blankets) any thickness including covered fillets and supporting members complete all as specified and as directed

M&L for 6mm dia .G.I. Hangers (upto 1200mm length) adjusting level fixed to rof slabs/rafters by means of ceiling cleats made out of GI flat 40 x 3 mm size 60mm long and expansion hold fastners 12.5mm dia. 40mm long complete all as specified.

M&L Anodised aluminium snap grid frame work for false ceiling complete all as specified and directed.

Providing and fixing Gypsum Board 09mm thick in ceiling fixed with screw as per manufacturers instructions complete all as specified and directed.

M & L for preparation of new steel surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer complete all as specified and directed.

M&L applying two coats of Camouflage pattern synthetic enamel painting to new surfaces steel/ CGI sheet surface exc. 10 cm width/girth over a coat of mordant solution including preparation of surfaces by removal of galvanisation if reqd, washing and cleaning,including filling with filler where reqd complete all as specified and directed.

M&L for preperation of old treated wood or wood based surface of any description over 10cm width or girth and applying one coat of synthetic enamal paint complete all as specified and as directed.

M&L for preperation of existing steel surface of any descripton ,over 10cm in width or girth ,not otherwise described and applying one coat of synthetic enamal paint ,complete all as specified and as directed.

M&L for preperation of old plastered wall surface of any description and applayng one coat of cement based paint of any colour or pattern complete all as specified and directed.

M&L for preperation of old plastered wall surface of any description and applyng one coat of white wash complete all as specified and as directed.

M&L for preperation of old plastered ceiling surface of any description and applyng one coat of white wash complete all as specified and as directed.

M&L for preperation of old plastered wall surface of any description and applyng one coat of Oil bound destemper complete all as specified and as directed.

Taking down chowkats / frames with shutters (without taking off shutters from the frames) area n'exc 1.5 Sqm each complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) area exceeding 1.5 Sqm and not exceeding 4 Sqm each complete all as specified and directed.

Hacking old broken glass (any thick ness, size, quality or description) from aluminium/steel/wooden frame work or stone, concrete or brick surrounds, glazed with oil putty or fixed with beads complete all as specified and as directed .

Taking down shutters of any description area not exceeding 1 Sqm each easing & adjusting and refixing in the same opening complete all as specified and directed.

Taking down shutters of any description area exceeding 1 Sqm and not exceeding 2 Sqm each easing & adjusting and refixing in the same opening complete all as specified and directed.

M&L Anodised aluminium frame of standard section for doors, windows, ventilators ,partition and curtain walls with double rebates including joining cleat for fixing etc. complete all as specified and directed.

M&L for powder coating in Anodised aluminium frame of standerd section for doors, windows, ventilators , partitions and Curtain walls etc. complete all as specified and directed. Note: Over all weight of Anodised aluminium frame shall be considered for payment.

M&Lfor Anodised aluminium door shutters, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, anodised aluminium snap beading, screws,hinge type B-21 100mm long (3 no.) suitable handle (2 no.) (Glass / Wiremesh should be measured and paid separately) complete all as specified and directed.

M&L for anodised aluminium window and ventilator shutters of any type with or without sash bars, aluminium sections weeighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fitings such as suitable stays ,suitable hinges (if required.) suitable handles (1 no.) (Glass / Wiremesh should be measured and paid seperately) complete all as specified and directed.

M&L for powder coating in Anodised aluminium frames of shutters of Doors , window and ventilator openings etc as per items 28 & 29 above complete all as specified and directed. Note: Over all area of shutters of Doors ,window and ventilator shall be considered for payment.

M&L sheet glass 4.0mm thick ordinalry quality and glazing with aluminium beeds in square not exc 0.50 sqm in each pane complete all as specified and as directed

M&L for pressed steel frames of size 125x60mm for doors with one or more rebates including necessary fixings lugs,excluding hinges,lock strike plate,etc,complete ,as specified ,supplied and fixed complete all as specified and directed.

S&F 2nd class soft wood plain, solid, straight chowkets and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and directed. (Glass shall be measured Seperately)

S&F mild steel work as in hold fasts and similar work confirming to Fe-290 or Gd -E 165 complete all as specified and directed.

M&L for treating wooden chowkats surface of any description n exc 10 cm in width or girth with black bituminus paint in two coats complete all as specified and directed.

M&L for preparing and treating small articles of builders hardware such as MS hold fasts ,MS but hinges etc, with two coats of synthetic enamal paint over a coat of primer when un connected with other paintings or when painted in a defferent tint complete all as specified and directed.

Material & labour PCC (1:3:6) type B0 (using 12.5 mm graded stone aggregate) as in hold fast , bed block and like complete all as specified and as directed by the Engr-in-Charge.

S&F for 30 mm thick Flush shutters, solid core construction ,with block board core and plywood face panels commercial type on both sides , Supply and fixed to chowkats, complete all as specified and directed.

S&F 30 mm 2nd class soft wood Glazed and skelton door or window shutter, open and prapared to receive the glass, gauze etc.(without sash bars) edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass etc. (Glass / Wiremesh should be measured seperately) complete all as specified and directed.

S&F MS framedwork such as grills, gratings etc with ends of bars shouldered and/or rivited or forged in spikes, framed guard bars, barred iron doors, ledders framed balsters walk ways railings frame work of water tanks and similar work confirming to Fe-290, Gde-E-165 complete all as specified and as directed.

S&F Steel windows (frame with shutter) with side hung shutters including projecting type hinges with steel handle ,and steel peg stay,complete with glazing bars,dovatiled or welded complete all as specified and directed. (Glass shall be measured and paid Seperately)

M&L sheet glass 3mm thick ordinalry quality and glazing with oil putty or wooden beads in square not exc 0.50 sqm in each pane complete all as specified and as directed.

S&F Galvanised mild steel wire cloth ,0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed.

S&F in repairs Galvanised mild steel wire cloth ,0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed.

S&F mild steel butt hinges, medium weight cold rolled 100mm size complete all as specified and as directed.

S&F 150mm long aluminium anodized, barrel tower bolt of extruded section complete all as specified and as directed.

S&F 150mm size extruded aluminium alloy handles, fabricated type, anodized complete all as specified and as directed.

S&F for factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Paneling of plain colour PVC sheet to be fitted in the M. S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling & fixing in the frame at site complete all as specified and as directed by Engineer-in-Charge.

S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed by Engineer-in-Charge.

S&F mild steel butt hinges, medium weight cold rolled 75mm size complete all as specified and as directed.

S&F 100mm long aluminium anodized, barrel tower bolt of extruded section complete all as specified and as directed.

S&F 100mm size extruded aluminium alloy handles, fabricated type, anodized complete all as specified and as directed.

S&F in repairs mild steel ordinary rat tail rod pattern springsof size upto 300mm long including roller and roller plate complete all as specified and as directed.

S&F in repairs Aluminium alloy anodised ,sliding door bolt 250mm with hasp,staple(bolt type) and fixing clips of sheet ,cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast, aluminium alloy complete all as specified and as directed.

S&F in repairs Aluminium (extruded section) floor door closer hydraulically regulated ,designation No.3, universal type, suitable for door shutter of 851 to 1000mm in width and of weighjt between 61 to 80 Kg complete all as specified and directed.

S&F in repairs 100mm Aluminium Mortice lock 2 livers vertical type complete all as specified and as directed.

Taking down cement plaster any description on brick/stone or concrete walls, etc including racking out joints, hacking for key, scrubbing down with water etc.complete all as specified and directed.

Demolition of Brick/precast concrete block/Stone/boulder masonary walling built in cement mortar including all quoins, arches , pillars etc complete all as specified and directed.

M&L pre-cast cement concrete(20mm graded crushed stone aggregate) 1:3:6 type C-1 as in block masonery exc 10cm in width with solid block masonery with solid blocks,exc.10cm in width and setting in cement mortar 1:6 complete all as specified and directed.

M&L for 10mm thick rendering on fair faces of brick works finished even and fair without using extra cement in cement mortar 1: 4 complete all as specified and as directed

Supply only Liquid water proofing copmpund.

M&L for 15 mm thick rendering on unfair faces of brick works finished even and fair without using extra cement in cement mortar 1:6 complete all as specified and as directed

M&L for preperation of new plastered wall surface of any description and applayng two coats of cement based paint complete all as specified and as directed.

M&L for preperation of new concrete /plastered surface of any description,applaying three coat of white wash complete all as specified and as directed complete all as specified and as directed.

M&L for preparation of new concrete /plastered surface of any description and applying two coat of distemper oil emulsion over a coat of primer complete all as specified and as directed complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (But not backing ) and rubbish of premises complete all as specified and directed.

Demolition of stone slabs and chequered tiles of any description or thickness in floors aprons etc.laid bedded and pointed in any mortar complete all as specified and directed.

Demolition of bricks (laid flat or on edge) or interlocking tiles in floors, channels, kerbes, aprons, etc laid dry or laid dry and pointed complete all as specified and directed.

Demolition of cement concrete in ground floor and pavings n'exc 15cm thickness (below or above ground level) complete all as specified and as directed.

Taking down steel tubing ( 15mm bore) and connections in any position including cleaning for refixing or removal to store complete all as specified and directed.

Taking down steel tubing ( 20mm bore) and connections in any position including cleaning for refixing or removal to store complete all as specified and directed.

Demolition and breaking up drain pipes ( salt glazedware, AC,Reinfoced concreet, PVC pipe) of internal dia upto110 mm bore, set in cement mortar and taking out of trenches if required complete all as specified and directed.

M & L for 75 mm PCC 1:3:6 type C-2 using 20mm graded aggregate as plinth protection finished even and smooth with out using extra cement complete all as specified and directed.

M & L for 75 mm PCC 1:3:6 type C-2 using 20mm graded aggregate as in sub floor or hard standing rough finished surface complete all as specified and directed.

M&L Forming Contraction (Dummy) joints 75 mm deep x 10mm wide for plinth protection & similar work , filled with sealing compound Grade 'B' in plinth protection complete all as specified and directed.

M&L for Non skid coloured ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exc 0.11Sqm and nexc .18 Sqm in floor etc set and jointed in neat cement slurry and pointed with white or coloured cement mixed with pigments to match the colour of tiles complete all as specified and directed.

M&L for non skid coloured ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exc 0.06 and nexc .11 sqm in floor etc set and jointed in neat cement slurry and pointed with white or coloured cement mixed with pigments to match the colour of tiles complete all as specified and directed.

M&L for screed bed with CM (1:6) 15mm thick for laying floor tiles complete all as specified and directed.

M&L for Glazed ceramic coloured tiles in vertical surfaces 300 x 200 x 7mm thick set and jointed in neat cement slurry and pointed with white or coloured cement mixed with pigments to match the colour of tiles complete all as specified and directed.

M&L for rendering screed bed with CM (1:4) 10mm thick for laying wall tiles complete all as specified and directed.

M&L Rubber tiles with fabric backing or insert,plain coloured or with marbled finish fixed with approved adhesive complete all as specified and directed.

S&F GI tubing of 15 mm dia medium grade with all fittings & fixed complete to walls and ceiling or laid in floors complete all as specified and as directed by the Engr-in-C.

S&F GI tubing of 20mm dia medium grade with all fittings & fixed complete to walls and ceiling or laid in floors complete all as specified and as directed by the Engr-in-C.

S&F in repairs 15mm Stope/Gate valve ,cast copper alloy,screwed down, high pressure,with crunch or butterfly handle ,screwed both ends for iron pipe or for union and fixed complete all as specified and directed.

S&F in repairs 20mm Stope/Gate valve ,cast copper alloy,screwed down, high pressure,with crunch or butterfly handle ,screwed both ends for iron pipe or for union and fixed complete all as specified and directed.

S&F Rotational moulded polyethlene water storage tanks (cylindrical vergical with closed top) 500 Ltr capacity hoisted and fixed in position including removal of existing damaged water tanks all as specified in SSR Part I complete all as specified and directed.

S & F in repairs 20 mm Brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.

S & F in repair Vitreous China wash basin, white, flat back, size 450 x 300mm including cutting for and pinning in ends of brackets or erecting stand but inclusive of fixing of supply and waste pipe complete all as specified and directed.

S&F in repairs Vitreous China bowl Urinal, flat back, size of 465x355x265mm white with grating and union for discharge pipe and PTMT waste coupling with waste pipe (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and directed.

S&F in repairs Vitreous China Sqatting pan Orissa Pattern Indian Type Size 580 x 440 with integral foot rest (excluding flushing cistern and flush pipe) complete all as specified and directed. Colour as decided by Engneer-in Charge.

S&F in repairs, 10 litres capacity PVC valveless syphonic action type, flushing cistern (ISI marked), low level with inlet, ball valve, float bracket & flush pipe complete all as specified & directed.

S & F in repair 15 mm bore pillar taps, fancy type Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed. (Cat pat No- F100001 of Hindware)

S&F in repairs Angle stope valves, cast copper alloy, screwed down high pressure with crutch or butter fly handle, fancy type, chromium plated with long shank and cup (concealed type), 15mm bore dia of pipe complete all as specified and directed.

S&F waste pipe of polyethylene of low or high density or PVC ,32 mmdia for urinal/wash basin/ flush tankfixed in repairs complete all as specified and directed.

S&F in repairs PVC connection pipe suitable for connecting flushing cistern and WHB etc 450mm long complete all as specified and directed.

S & F in repairs, waste coupling of PTMT 32mm bore for urinal / wash basin (Half or full threaded ) (Minimum Weight 45 grams) complete all as specified and directed.

S & F in repair CP floor gratings 100mm dia with o without waste hole of PTMT (mim waight 40 grms) complete all as specified and directed.

S&F in repairs 15mm dia bib tap cast copper alloy chromium plated butterfly handle screwed down screwed for iron pipe completed (15mm dia tap) complete all as specified and directed.

S & F 110 mm dia, PVC rain water pipes, single socketed, in any length with sealant rubber ring joints including necessary MS flat Iron clamps of size (40 x 4mm) complete all as specified and directed.

S & F 75 mm dia, PVC rain water pipes, single socketed, in any length with sealant rubber ring joints including necessary MS flat Iron clamps of size (40 x 4mm) complete all as specified and directed.

PCC 1:3:6 TYPE C-2 (40mm gradded aggergate) bed to drain pipe incl packing under and hanching against side after they are laid and tested up to 110mm dia pipe complete all as specified and directed.

M&L for Cement concrete type D-2,1:4:8 (40mm graded aggreate) 100 mm thick as in sub -floors ,sub- bases ,floors and pavings,etc. complete all as specified and directed.

M&L machine pressed precast concrete interlocking paver block any shape and size polished with grey cement and pigment confirming to IS 15658-2006 of 60mm thickiness M-35 grade complete all as specified and directed.

M&L sand filling (50 mm average thickness) under floors in foundations and for laying Interlocking paver blocks including watering and consolidation complete all as specified and as directed by Engr-in-Charge..

M&L PCC 1:2:4, 25 mm thick type B0 using 12.5mm graded stone aggregate as in floor finished even and fair with out using extra cement complete all as directed by Engr-in-charge.

M&L for Machine cut Kota stone slab flooring 20-25 mm thick including skirting over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete all as specified and directed.

M/s DEVRATAN ENTERPRISES