Internal Electrification Work of Employment Complex at Toph Sherkhania Jammu

Amount

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.

Group C

Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required

2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

2 X 6.0 sq. mm + 1 X 6.0 sq. mm earth wire

4 X 6 sq. mm + 2 X 6 sq. mm earth wire

4 X 10 sq. mm + 2 X 6 sq. mm earth wire

4 X 16.0 sq. mm + 2 X 6.0 sq. mm earth wire

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.

1 x 1.5 sq. mm

Supplying and drawing co-axial TV cable RG-6 grade, 0.7mm solid copper conductor PE Insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/recessed steel/PVC conduit as required.

Supplying and fixing of following sizes of PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of Recessed conduit as required.

Supplying and fixing following size/modules , GI box alongwith modular base & cover plate for modular switches in recess etc. as required.

1 or 2 module ( 75mm x 75mm)

3 module ( 75mm x 75mm)

4 module ( 125mm x 75mm)

6 module ( 200mm x 75mm)

8 Module (125mmX125mm)

12 Module (200mmX150mm)

Supplying and fixing on exisitng GI Box modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 15/16 & 5/6 amps modular socket outlet and 15/16 amps modular switch, connection, painting etc as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providng and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A modular switch, connections etc. as required. (For light plugs to be used in non residential buildings).

Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, "C" curve including connections, painting etc. as required.

Supplying and fixing following modular switch / socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required

5/6Amp Switch

2 way 5/6 Amp 2 way Switch

3 pin 5/6 Amp socket outlet

15/16 A switch

6 pin 15/16 A socket outlet

Telephone socket outlet

TV antenna socket outlet

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.

Supplying and fixing call bell / buzzer suitable for D.C./A.C. single phase , 230volts, complete as required.

Supplying and drawing following pair, 0.5 sq.mm FR PVC insulated copper conductor, unarmoured telephone cable in the existing surface/recessed steel/PVC conduit as required

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

6 way , Double door

8 way , Double door

12 way , Double door

16 way, Double door

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

4 way (4 + 12), Double door

6 way (4 + 18), Double door

8 way (4 + 24), Double door

Supplying and fixing 5 amps to 32 amps rating, 240 Volts, 'C" series, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Single pole

Single pole and neutral

Supplying and fixing following Electrical items complete with connections as required.

MCB SPN 40 Amp

MCB SPN 63 Amp

MCB TPN FP 40Amps

MCB TPN FP 63Amps

Angle/Batten Holder

Supply, installation, testing & commissioning of CPRI Approved maintenance free copper earthing system with 3 mtrs. Electrode 40 mm dia with minium 2mm thick and does not require manual additional of water. The electrode shall be pre-filled with hygroscopic powder and provided with suitable breathing and leaching ports at the ends. the electrode shall be surrounded by suitable powdered form of BEE MOIST so as to provide maximum contact between the electrode and the compund. The compound should be eco-friendly and having ROHS certification. The earthing pit should be covered with PVC cover. along with providing and laying of 25 x 3 mm copper strip from copper rod upto the main panel.

Supply, installation, testing & commissioning CPRI Approved of GI Electrode Earthing with 50mm dia and 3 meter length, with 3mm thick the electrode should be hot-dip galvinised. The GI Electrode shall be pre-filled with Cristaline Conductive Materila (CCM). The GI electrode shall be surrounded with BEE MOIST compound to provide maximum contact betwen the electrode and compound should be eco-friendly and having ROHS certification GI Electrode Earthing should be maintinance free and does not require regular manual addition of water GI Electrode shall be tested from CPRI. The earthing pit should be covered with PVC cover. along with providing and laying of 25 x 5 mm G.I strip from G.I rod upto the main panel.

Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2 mm thick, and vitreousenameled white on both sides, and with inscription in single red colour on front side as required.

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.

upto 35sq.mm

Above 185 sq. mm and upto 400 sq. mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required.

upto 35sq.mm

Above 185 sq. mm and upto 400 sq. mm

Supply of 1.1kV Grade XLPE Insulated PVC sheathed Aluminium Armoured cables conforming to IS 7098 Part-II of following ratings conforming to IS 7098 Part-1 with Latest Amendments

3.5C X 400 sq. mm

3.5C X150 sq. mm

3.5C X50 sq. mm

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade as required

3½ X 400 sq. mm

3½ X 150 sq. mm

3.5C X50 sq. mm

Supplying, installation, testing & commisioning of Lightening fixtures.

20/22 watt LED 4 feet tube light fitting/fixture CRCA housing with 2000 Lumens and min lumens efficiency 100 Lumens/watt P.F 70.95 THD < 16% & voltage input range 140-270 V with Shot circuit & overloading protection circuit off

10/12 watt min.1100 Lumens ( system output), surface mounting having CRCA body, IEC compliant (Mirror Light)

18/20 Watt surface mounted round/square slim panel LED Down Lighter min 1400 Lumens (system output) of die cast aluminium housing and heat sink IEC complaint.

10W LED Endura Bulkhead.

Post top lamps of pure polyester UV resistant powder coated die cast aluminium housing with PMMA clear diffusser of wattage 20 watt

Supply and fixing of 400 mm sweep pedestal wall mounting fan

Supply and fixing of 1200 mm sweep 230V 50Hz celing fan with double ball bearing with low power consumption.

Supply and fixing of following sizes of heavy duty exhaust fan as per approved makes

300mm Sweep

450mm Sweep

Supply, Installation, Testing and Commissioning of 225mm(w)x38mm(h) 3 compartment GI underfloor raceway.

Supply, Installation, Testing and Commissioning of Galvanised Steel Junction Box of size 225mmX225mm suitable for 225mm(w)x38mm(h) 3 compartment GI underfloor raceway.

Supply , Installation of 9U Network Rack made of CRCA 1.2mm sheet powder coated with RAL9017 color, 4mm toughened tinted glass, Injected one piece polyurethane gasket on frame. Rack components shall be Cooling Fans - 2 Nos, cable Manager - 3Nos, cantilever tray 255D-1 No., Heavy duty stationery shelf, hardware, nuts , power distribution board.

Supply , Installation of 42 U Network Rack made of CRCA 1.2mm sheet powder coated with RAL9017 color, 4mm toughened tinted glass, Injected one piece polyurethane gasket on frame. Rack components shall be Cooling Fans - 2 Nos, cable Manager - 3Nos, cantilever tray 255D-1 No., Heavy duty stationery shelf, hardware, nuts , power distribution boards - 5 Nos.

Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed steel/ PVC conduit as required.

Supply erection, 24 Port Patch Panel Cat6

Supply erection, Testing and commisioning of Cat6 UTP keystone connector

Supply erection, Testing and commisioning of Cat6 UTP patch cord 1m

Supplying, installation testing and commissioning of I/O modules complete with Box, RJ-45 Socket,Front Plate as per the Satisfaction of the Engineer Incharge

Supply Installation Testing and commisionng of Wifi Access Point with PoE ( 4 Port)

Supply, Installation, Testing and commissioning of 630 KVA Indoor type, Unbalanced input , unbalanced output, LV Automatic Servo Voltage Stabilizer indoor type, suitable for input voltage range of 135V to 460V three phase, and out voltage at 433V +/-1%. The stabilizer shall have all necessary protections i.e. overvoltage , undervoltage, surge protection, overcurrent, short circuit. Contractor shall submit necessary documents, drawings for approval before intiating procurement process. Stabilizer shall have suitable arrangement for termination of cables as per site requirements. Stabilizer shall be supplied with first fill of oil, and complete with bypass panel alongwith MCCB's of suitable rating as its protection.

Supply , Installation, Testing and commissioning of POP up box suitable for 6Module accessories mounting.

Supply, Installation of DLP PVC Trunking system on walls consisting of following components.

DLP Trunking Body 50mmx145mm with 2 covers 45mm

End cap

Flat Angle

External Angle

Internal Angle

Flat Junction

4M frame for mounting of Outlets/Swiches

6M frame for mounting of Outlets/Swiches

Supply, Installation Testing and commisisoning of 30kVA min VAH10080 rating Online Double conversion IGBT True Online Uninterrupted Power Supply alongwith 60 Minutes battery backup suitable for three phase 330/415V input and three phase 415V +/-1% output. UPS shall have inbuilt galvanic isolation transformer , automatic and manual byepass system. UPS shall be supplied with SMF batteries, Mounting rack for batteries, internal cabling/busbar for banking of batteries, cabling between UPS to Battery bank. UPS shall have inbuilt protections against short circuit, undervoltage, overvoltage, surge protection, loss of neutral.

Supply, Installation of 10 pair Telephone krone box suitable for Termination of 10 Pair Telephone cable including Krone connectors for 10 Pair cables.

Supply, Installation of 10 pair Telephone cable including Krone connectors for 10 Pair cables.

Supply, Installation of 4 pair Telephone cable including Krone connectors .

Supply, Installation, Testing and commissioning of Floor Mounted Low Voltage panel IP42 suitable for operation on 433V 3 Phase, 50Hz supply, made of 2.0mm CRCA sheet enclosure with Aluminium bus bar Four wire with following switchgears and metering. Necessary arrangement be made for termination of incoming cable and outgoing cables . Contractor to get the G.A. drawings approved before execution. Incomer: ACB- 800 Amp-50 KA- with releases Digital Energy Meter for Measurement and display (LED/LCD) of Current, Voltage, Pf.=2 No. Current Transformer set having Ratio of 160/5, set of protection MCBs = 2 set Bus Bar : Bus Bar : 1500 A 4 Wire Aluminium Bus Bar supported on DMC insulator, covered with high quality PVC sleeves.= 1 set Bus Bar : 500 A 4 Wire Aluminium Bus Bar supported on DMC insulator, covered with high quality PVC sleeves.= 1 set Outgoing : 250 A 4P MCCB 35KA - 5 Nos 100A 4P MCCB 16kA - 8 Nos. Change Over Switch-250 Amp-FP=1 No. All MCCBs shall be provided with Rotary operating Mechanisam All MCCB's shall have rotary handle and ICU-ICS 100%.

Supply Installation of 7 m long galvanised Steel tabular pole with bracket for mounting of 1 Nos LED street light including making foundation for the pole complete job, wiring from pole junction box to light, junction box with terminal blocks suitable to terminate loop in loop out cable of 4Cx16sqmm Aluminium alongwith installation of 6A SP MCB - 1No. in the box. of Pole .

Supply, Installation, Testing and commissioning of 70W led Street lights having system lumen efficacy of minimmum 100 lumen per watt, 3 kv Surge protection, IP 66, manufacturere name Embossed on dicast Aluminium body .

Two Loop Panel.

Supplying, installation, testing & commissioning of repeater panel wih 320 character/ Touch screen LCD display with inbuilt reset, acknowledge and silence switches complete as required.

Supplying, installation, testing & commissioning of intelligent analog addressable photothermal detector complete with mounting base complete as required.

Supplying, installation, testing & commisssioning of intelligent addressable programmable sounder complete as required.

Supplying, installation, testing & commissioning of addressable manual call point complete as required.

Supplying, installation, testing & commissioning of UL/EN Listed Intelligent addressable input module for monitoring purpose complete as required as per specification.

Supplying, installation, testing & commissioning of addressable fire control module complete as required.

Supplying, installation, testing & commissioning of fire fighter phone jack complete as required.

Supplying, installation, testing & commissioning of addressable phone control module complete as required.

Supplying, installation, testing & commissioning of fault isolator complete with base as required.

Supplying, installation, testing & commissioning of fire fighter telephone handset complete as required.

Supplying & laying of 2x1.5 sqmm fire survival armoured cable, 600/1000V rated with annealed copper conductor having glass mica fire barrier tape covered by an extruded layer of Cross Linkable Ethylene Propylene Rubber (EPR) insulation and LSZH inner bedding, steel wire armouring & LSZH outer sheath complete as required.

OFC to LAN media convertors

Supplying and installation of ABC type fire extinguisher cylinder wall mounted of 6 kg

MS Anil Kumar Kapahi Contractor

Mandeep Sharma