Loading…
Loading…
Tender Value
₹10 L
EMD Value
₹20,000
Closing Date
20 Jun 2026, 6:00 pm
AGE (I) Ayodhya Cantt
Asst Garrison Engineer (I), Military Engineer Services, Ayodhya Cantt PIN-224001
REPAIR/REPLACEMENT AND MAINTENANCE OF STREET LIGHTS AND SECURITY LIGHTS , ACCESSORIES , UG CABLES, TIMER PANEL INCLUDING CONNECTED ITEM OF WORKS OF HIMACHAL NIWAS, PUNJAB NIWAS AND NEARBY MD ACCN AREA AT AYODHYA CANTT UNDER AGE (I) AYODHYA
2026_MES_768577_1
8400/180/E8
Open Tender
Civil Works
18 days
Ayodhya Cantt
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
Ayodhya
₹20,000
Yes
29 May 2026
29 May 2026
22 Jun 2026
29 May 2026
20 Jun 2026
13 Jun 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Supply and errect 6 mtr long Hot dip galvanised octagonal pole with 130mm bottom A/F and 70mm top A/F made up of 3mm thick HT steel plate having base plate of 220x220x12mm thick alongwith single arm bracket of 1000 mm length made up of 48.3x3.25mm thick plate, 4 Nos M20 x 700 mm GI 'J' type foundation with door opening 0.90x 350 mm, with bolts,nuts, with template, bakelite sheet box with 01 no 6 A SP MCB and stand type terminal block suitable for 4 core 16 sqmm cable complete. | 5 | Each | - | - |
| 2 | M&L for RCC foundation of grade M20 (1 cement : 1.5 sand : 3 stone/brick aggregate) of size 550mm x 550mm x 1400mm out of which 1200mm shall be below F.G.L.(Finished Ground Level) using 4 no. 12mm dia steel reinforcement of grade Fe-415 with 50 mm clear cover to reinforcement and rings using 8mm dia steel reinforcement @ 190 C/C using shuttering, along with supply & installation of 2 nos. of 63mm dia PVC pipe for cable entry and cable exit. 4 no. 'J' type foundation bolts shall be anchored in the foundation (PCD of 205 mm) in such a way that 125mm length of bolt is projected above foundation. It includes water curing as required and soil excavation & backfilling. It also includes supply of all material and labour including erection of foundation at Site. | 5 | Each job | - | - |
| 3 | S&f in repairs of LED Street Light fixture single Piece Pressure Die Cast Aluminium Housing (LM6 Alloy) high quality integrated LED Luminaire. LED Street light fixture, rated wattage of 70 W, system efficacy>130lm/watt, system lumen: 9100lm, The luminaire should be of Class B Serviceability. The LED used in the luminaire shall be SMD type only . IP66 & IK10, SDCM<5, THD<10%, CRI>70 & CCT: 5700K, Protection Class I, Operating temp: +0 to 50 degree C, Ambient temp.: 35Deg. C, Operating voltage of 120-277V (AC) at 50Hz, LED Life(L70B50): 75,000hrs, Inbuilt surge protection of 4KV & External SPD rating of 10KV, Power factor(pf)>0.95, Potted Driver with LED Driver efficacy>85%, complied with IEC 60598, Driver meets IEC61347 & BIS. The luminaire should have Integrated optics to provide a high quality glare free lighting system. Light fixture with HV/LV cut-off options. Make- Philips, Bajaj, Crompton,Havells | 35 | Each | - | - |
| 4 | S & F in repairs Floodlight (integrated type only) with a minimum system lumen of 13000Lm and system wattage of 100W with a nominal efficiency 120Lm/W. CCT of 5700K with SDCM <5 and CRI: 70. The housing made from non-corrosive high-pressure die-cast aluminum to with stand extreme environments. Power Factor >0.95, THD <10%, & Lifetime of 50K hours@L70, suitable for continuous operation (12-14 Hrs./day). The Ingress protection is IP66 with an IK rating of 08. Optical and control gear compartments is maintainable/replaceable without impacting the LED units. The access to the optical and the gear compartment is separate. While accessing the gear compartment, the optical compartment is not accessible. The luminaire has 4KV internal SPD duly bolted in the Luminaire. The SPD is able to sustain a minimum 15 hits of 10KA rating, i.e. total of 45 hits across all the three modes as per IEEE 62.41.2. Luminaire has the srviceability of Class B. The driver should be BIS approved, fully potted and encapsulated with 440V Stress Voltage protection for 8 Hrs. High Cut off : 325V(+/- 15V) and Auto Restart function should also be available within the fixture. Make- Philips, Bajaj, Crompton,Havells | 8 | Each | - | - |
| 5 | S&F in replacement post top energy saving environment friendly long life aesthetically designed with symmetrical light distribution LED Post Top lantern /gate light of capacity 15-20 watt operated on 240 Volts 50 Hz supply with spun aluminium landscape luminaire with high power LED s as light source IP 65 protection complete all as specified & directed.Make- Havells ,Philips, Bajaj, Crompton | 6 | Each | - | - |
| 6 | Supply and fixing in replacement of ALL-in-One Solar LED street light fitting made up with High Efficiency Mono Crystalline Solar PV Module with suitable Wp, lithium Ferro Phosphate Battery with in built BMS technology , High Efficacy LED, MPPT Solar Charge controller and aluminium Extruded body & is specially programmed to automatically control the dimming and brightness of light , which increases the backup time complete of LED Power light capacity 20/25 Watt IP 66 Protection complete all as specified and as directed. Make- Havells ,Philips, Bajaj, Crompton | 4 | Each | - | - |
| 7 | S&F and commissioning and testing of Automatic Nature timer switch control of Street Lights complete with MCB, Power and Panel based on lux level of natural light.The sensor (Nature Switch) alongwith and including supply and fix of suitable power contactor of 1 Nos 40 Amps (Two pole ) two Nos MCB 63 Amps (single pole) and support terminals enclosed in pole /wall mountable enclosure of suitable size made out of rust proof electric shock proof termite proof and FR grade special moulding compound sintex make SMC junction box of suitable size confirming to IP54 circuit wiring suitable enough to take load of 8 KW single phase load, with Auto and Manual Mode opeartion facility all as per Kakatiya Energy System Ltd Hydrabad Model SWADEEP Model SWADEEP-02EC 8KW 1P , Healer Enterprises or techno commercially equivalent models in Havells/ L & T complete all as specified and directed. Note :- The contractor shall provide the company warranty certificates of the timer. | 1 | Each | - | - |
| 8 | M&L for cross arms (any type) supports, brackets, stiffners etc made out of MS channel, angle iron , flat iron of any size including drilling of holes, making clamps, eye hooks, nuts, bolts and washers etc, welding if required including painting with two coats of aluminium paint over a coat of red oxide paint as well as dismantling of existing complete all as specified & directed | 0.25 | Qtl | - | - |
| 9 | M& L for Cleaning and preparation of old painted surface of LT/street light pole by using primer where required complete and painting with one coat of aluminium paint including channels/ brackets, street light brackets, cross arms and making red & white strips or black & white strips as directed with synthetic enameled paint of 30 cm height, each alternative strip upto 1.5 mtr height and writing pole numbers with black synthetic enameled paint and applying white wash on existing PCC coping complete all as specified. | 100 | Each job | - | - |
| 10 | S&F in repairs heat shrinkable 1100 Volts indoor termination LT end joints of size 25 sqmm to 50 sqmm 4 core/3.5 core complete all as specified & directed. | 4 | Each | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.36 MB
BOQ_860705.xls
BOQ • 0.82 MB
TENDERDOCS180.pdf
Tender Documents • 0.93 MB
Download all tender documents and submit your bid