Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.8 LAccepted-Finance BOOTH NO 7 SECTOR 23 C CHANDIGARH | ₹1.8 L | L1 | Accepted-Finance L1 |
| 2 | L2₹1.9 LRejected-Finance H NO 90 KHUDHA ALI SHER NEAR 4 NO TUBEWELL KHUDHA ALI SHER CHANDIGARH 160103 | S A S NAGAR | PUNJAB | 160103 | ₹1.9 L | L2 | Rejected-Finance L2 |
Tender Value
₹2.8 L
EMD Value
₹5,605
Closing Date
13 May 2026, 12:00 pmClosed
Er. Ravinder Singh
Executive Engineer, Electrical Division No. 2, 1st Floor Additional Deluxe Building Sector- 9/D, Chandigarh.
As per NIT
2026_CHD_92183_1
E2/26/30
Open Tender
Electrical Works
90 days
Chandigarh
As per NIT
2 documents required · 2 mandatory
₹0
₹5,605
29 May 2026
7 May 2026
13 May 2026
7 May 2026
13 May 2026
7 May 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Full stator rewinding of ceiling fan (condenser type) of 1400 mm sweep with new copper winding wires including cleaning and insulating the stator slots, sleeving, soldering, wrapping of cotton tape, reassembling, varnishing and testing etc. complete. | 250 | Each | 430 | ₹1,07,500 |
| 2 | Full stator rewinding of ceiling fan (condenser type) of 1200 mm sweep with new copper winding wires including cleaning and insulating the stator slots, sleeving, soldering, wrapping of cotton tape, reassembling, varnishing and testing etc. complete. | 20 | Each | 347 | ₹6,940 |
| 3 | Providing split pin, check nuts, hanger nuts and bolts etc. including hanger if required to be replaced after removing the old. The rates includes re-erection of ceiling fan after repair and other petty material such a screws pin, bolts nuts etc. as per requirement at site. | 200 | Each | 90 | ₹18,000 |
| 4 | Fabrication of shaft after removing the shaft from the stator body safely and then labour works for welding and turning of the same to give the original shape from workshop and other petty material required. to complete the job to the entire satisfaction of Engineer-in-charge. | 100 | Each | 95 | ₹9,500 |
| 5 | Replacement of ball bearing of ceiling fan including greasing, re-assembling and testing etc. | 350 | Each | 125 | ₹43,750 |
| 6Supply and erection of fan condenser (paper condenser) for ceiling fan of following rating: The condenser is to be installed in existing ceiling fan after dismantling the defective condenser including connection and testing etc. The fan condenser should be of Epcos make. | |||||
| 6.01 | Condenser 2.5 µ fd. | 100 | Each | 60 | ₹6,000 |
| 6.02 | Condenser 3.15 µ fd. | 200 | Each | 65 | ₹13,000 |
| 7Full stator rewinding of Exhaust fan (condenser type) of 900/ 1400 RPM with new copper winding wires including cleaning and insulating the stator slots, sleeving soldering wrapping of cotton tape, varnishing re-assembling and testing etc. complete. | |||||
| 7.01 | 12" Sweep | 10 | Each | 700 | ₹7,000 |
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 10.04 MB
BOQ_112808.xls
BOQ • 0.28 MB
Download all tender documents and submit your bid