Special repair to Bldg No P 75 P 207 P-355 P 361 and P 430 at Sharifabad Mil Stn Under AGE (I) CIF (K)

Amount

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings, complete all as specified and directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F prepainted galvalume aluminium zinc coating GI base plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof, fixed with self tapping screws as specified, complete all as specified and directed.

Dismantling unframed timber scantling 40 sqcm & over in section framed in any position, complete all as specified and directed.

M&L 2nd class soft wood, clean sawn as in scantling, complete all as specified and directed.

M&L for Preparing surfaces of wood and wood based materials, new or old, of any description and girth, not otherwise described and treated with creosote oil, complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed.

M&L Non - skid coloured ceramic tiles not less than 8 mm thick area of each tile exceeding 0.06 sqm but not exc 0.11 Sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15mm thick screed bed or bedding layer in CM 1:6 complete all as specified and directed.

M&L Non - skid coloured ceramic tiles not less than 8mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to over and including 15mm thick screed bed or bedding layer in CM 1:6, complete all as specified and directed.

M&L Non - skid coloured ceramic tiles not less than 8mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm as in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including15mm thick rendering in CM(1:6), complete all as specified and as directed.

M&L Glazed ceramic coloured tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in CM(1:4), complete all as specified and as directed.

M&L Chequered cement concrete tiles 30cmx30cmx25mm thick as in path etc. set and jointed with grey cement and pigments as in floors and over and including screed bed or bedding layer of mortar 15mm thick in CM 1:6, complete all as specified and directed

M&L roughening surfaces of old concrete floor by picking , sweeping clean and washing down with water to remove dust, complete all as specified and directed.

M&L brushing neat cement slurry with 3.0 Kg of cement per sqm , complete all as specified and directed.

Dismantling Stone Slabs and tiles of any decription or thickness in floors, apron etc laid bedded and pointed in any mortar complete all as specified and diected.

M&L 20mm Granite (of any type) work( table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms, and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including15mm thick rendering in CM(1:6) complete all as specified and as directed.

Rounding/moulding to edges of Kota stone slabs, marble stone, granite stone slabs one edge, such as in steps, cooking platform, and other similar situations etc, complete all as specified and directed.

Demolition of cement concrete in ground floor and paving not exceeding 15cm thick (below or above ground level), complete all as specified and directed.

M&L 25mm thick PCC 1:2:4 type B1 (using 20mm graded crushed stone aggregate) as in levelling coarse of flooring complete all as specified and directed.

M&L 75mm thick PCC 1:3:6 type C2 (using 20mm graded crushed stone aggregate) as in plinth protection/path finishing the surface even and smooth without using extra cement laid in bays including joint filling using sealing compound grade -A, complete all as specified and directed.

Demolition of brick or stone masonry built in cement mortar including all quoins, arches, pillars etc but including ashlar facings, dressed stone work and precast concrete articles, complete all as specified and directed.

M&L brick work with sub-class 'B' bricks, straight or curved on plan exceeding 6 M mean radius built in CM 1:6, complete all as specified and directed.

Taking down cement plastering on stone wall/brick wall etc including racking out of joints hacking for key, scrubbing down with water etc, complete all as specified and directed.

M&L 15mm thick rendering on wall in CM 1:6 on stone masonry surface or surfaces other than fair faces of brick work and finishing the surface even and smooth with out using extra cement, complete all as specified and directed.

M&L 15mm thick rendering on wall in CM 1:4 on stone masonry surface or surfaces other than fair faces of brick work and finishing the surface even and smooth with out using extra cement, complete all as specified and directed.

M&L preparation of new plastered surfaces on walls and applying two coats of oil bound distemper over 3mm thick wall care putty complete all as specified and directed.

M&L preparation of old painted surfaces after complete removal of existing treatment and applying two coats of oil bound distemper over 3mm thick wall care putty as in wall complete all as specified and directed.

M&L preparing new plastered surfaces of walls for applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over surfaces complete all as specified and directed.

M&L preparing old plastered or unplastered surfaces of walls for applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over surfaces complete all as specified and directed.

Taking up or down 15 mm bore steel tubing and connection including cleaning for re-fixing or removal to store complete all as specifed and directed.

M&L 25mm outer dia 3-layer PP-R (P o l y p r o p y l e n e random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded p o l y p r o p y l e n e random fittings fixed complete to walls, ceilings or in floors etc.Complete all as specified and directed.

Taking up or down 20 mm bore steel tubing and connection including cleaning for re-fixing or removal to store complete all as specifed and directed.

M&L 32mm outer dia 3-layer PP-R (P o l y p r o p y l e n e random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded p o l y p r o p y l e n e random fittings fixed complete to walls, ceilings or in floors etc.Complete all as specified and directed.

Lagging to 20 to 32mm dia pipe used in internal water supply or plumbing all around with, 25 min thick bonded mineral wool performed "SNAPON" pipe section density 144 Kg/Cum conf to IS-9842 including chicken mesh wire neeting 25 gauge, 20mm mesh complete all as specified and directed.

Cutting chases, pinning in making good to facings where required and pointing in cement mortar 1:3 to ends or edges of shelves , for water tubing etc and making good, cutting exc 10cm girth but not exceeding 20cm girth in stone walls complete all as specified and directed.

Dismantiling of water tanks of capacity exceeding 250 and not exceeding 500 ltrs including all necessary fittings complete all as specified and directed.

S&F 500 ltrs PVC rotational moulded polyethylene water storage tanks double layer made (cylindrical vertical with closed top ) hoisted and fixed in position all as spd in SSR part-I, complete all as specified and directed.

S&F 32mm dia PPP-R gate valves (Brass inserted) as per requirment of the site complete all as specified and directed.

S&F 32mm dia PPP-R Ball valve (Brass inserted) as per requirment of the site complete all as specified and directed.

S&F in repairs Vitreous china wash hand basin (550X400mm) white, flat back excluding taps, including brackets &32mm waste cuppling complete all as specifed and directed.

S&F in repairs vitreous China urinals, half stall urinals (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe), complete all as specifed and directed.

S&F in repairs Vitreous Chinaware squatting pan, orissa pattern size 580mm x 440mm with integral foot rests, white and Size 110 x 110 PVC ‘S’ trap, front or back inlet, including provision of lime concrete, and making good to floors, complete all as specified and directed.

S&F in repairs 10 Litre capacity PVC valveless syphonic action flushing cistern low level white with inlet ball valve, float and handle including brackets and flush pipe of polyethylene of low or high density or PVC 32 mm dis for low level cistern, complete all as specifed and directed.

S&Fin repair 15mm dia Bib taps cast copper alloy fancy type chromium plated with crutch or butterfly handle screwed down, screwed for iron pipes or for brass ferrule, complete all as specifed and directed.

S&F in repair 15mm dia fancy type pillar taps cast copper alloy with capstan heads chromium plated scewed down high pressure with or without lettered ''Hot or cold'' with long screwed shanks and fly nuts screwed for iron pipe fixed complete all as specified and directed.

S&F swivel shower of PTMT any colour for fixing with 15mm pipe with shower arm 15mm size ,195 mm long with bend of 45 degree with flange of PTMT any colour fixed in repairs complete all as specified and directed.

S&F in repairs 15mm dia stop valves/angle valve chromium plated, fancy type with long shank and cup screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union complete all as specified and directed.

S&F in repairs Brass CP mixer fancy type chromium plated for mixing hot and cold water screwed down for iron pipe, complete all as specifed and directed.

S&F in repairs 15mm PVC connection 450mm long with PTMT nuts of superior quality complete all as specifed and directed.

S&F in repairs sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60cm long complete all as specifed and directed.

S&F in repairs tubular towel rail aluminum anodised 20mm dia, D type, 60 cm long with brackets complete all as specifed and directed.

S&F in repairs harrison rail/curtain rails , mild steel chromium plated with fixing brackets , stops, rollers etc complete all as specifed and directed.

Taking down chowkats or frames with shutters (without taking of shutters from the frame)of any description alongwith fittings n.exc 1.5sqm each, complete all as specifed and directed.

Taking down chowkats or frames with shutters (with out taking of shutters from the frame) of any description alongwith fittings exceeding 1.5sqm not exceeding 4 sqm each, complete all as specifed and directed.

S&F 2nd class hard wood Plain , solid , straight chowkats and frames, wrought , framed rebated on the solid , rounded or chamfered put together with glue pinned at joints, supplied and fixed, complete all as specifed and directed.

M&L for PCC 1:2:4 Type B0 (using 12.5mm graded crushed stone aggregate) as in filling to pressed steel frame, hold fasts and similars articles, complete all as specifed and directed.

S&F PVC Door frames of size 50 mm x 47 mm made of 5 mm single side pr-lam colour PVC sheet and edges will be painted to match with pre lam sheet reinforced with MS square tube, suppling and fixing in opening as per specification and drawing, complete all as specifed and directed.

S&F factory made solid panel pvc door shutter 30mm thick (style) consisiting of frame made out of M.S. Tubes for top & bottom rails M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, fixing in the frame at the site as per specification & drawing, complete all as specifed and directed.

S&F 35 mm thick 2nd class hard wood Plain framed, panelled shutters(any number of panels), with panel of timber flat on both sides (feather edged) or of 12mm thick BWP grade veneered particle board medium density wood commercial face veneers fixed to chowkats, complete all as specifed and directed.

S&F 2nd class hardwood glazed and skelton door shutters 35 mm thick divided into squares open rebated and prepared to receive glass, gauge etc edges of framing plain, chamfered, rounded tfitted with mltred beads for securing glass etc, size of members as specified in SSR Pt 1 section 8 clause 8.20 (a) supplied and fitted to chowkats with plain, chamfered or rounded mited and rebated bars any numbers, complete all as specifed and directed.

S&F framed work such as in grills & gates, gratings with ends of bars shouldered on forged in spickes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, rallings, framework of water tanks and similar work conforming to Fe 410 (or) Fe-310-0, complete all as specifed and directed.

S&F Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and avg erage with aperture 1.18 mm fixed with tinned tacks, or galvanised wire staples, complete all as specifed and directed.

S&F aluminium alloy anodised sliding door bolts 250 mm long with hasp, staple (bolt type)and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded sections complete all as specifed and directed.

S&F aluminium anodised barrel tower bolts of extruded section 150mm long complete all as specifed and directed.

S&F aluminium anodised barrel tower bolts of extruded section 100mm long complete all as specified and directed.

S&F Butt hinges, medium weight cold rolled 100 mm size ISI marked complete all as specified and directed.

S&F Butt hinges, medium weight cold rolled 75 mm size ISI marked complete all as specified and directed.

S&F Extruded aluminium alloy handles fabricated type anodised 150mm size complete all as specified and directed.

S&F Extruded aluminium alloy handles fabricated type anodised 100mm size complete all as specified and directed.

S&F in repairs 300mm mild steel ordinary rat tail rod pattern springs including roller and roller plate complete as fixed in repairs.

Dismantiling of Cement asbestos /CI/PVC pipe of size 100mm dia and below complete all as specified and directed.

S&F 110mm PVC (SWR) pipes single socketed in any length with rubber ring joints,fixed to walls complete all as specified and directed.

S&F 75mm PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to walls complete all as specified and directed.

S&F 110mm PVC (SWR) bends with or without oval access door complete all as specified and directed.

S&F 75 mm PVC (SWR) bends bends with or without oval access door complete all as specified and directed.

PVC 110mm (SWR) vent cowl, complete all as specified and directed.

M&L 75mm PVC (SWR) floor trap , plain with grating including jointing with solvent cement complete all as specified and directed.

Demolition of re-inforced cement concrete as in beam /Slab and similar suspended work (reinforcement cut as required to facilitate demolition), complete all as specified and directed.

M&L providing reinforced cement concrete nominal mix type B1 1:2:4 ( using 20mm graded crushed stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like etc complete all as specified and directed.

M&L TMT steel bars 8mm dia and over cut to length, bent to shape required including cranking, bending spirally, hooking ends and binding with and including mild steel wire annealed not less than 0.9 mm dia or securing with clips, complete all as specifed and directed.

M&L cement concrete 1:2:4 Type B-1 (using 20mm graded crushed stone aggregate) as in copings, weathering, slightly rounded or chamfered angles and throating, complete all as specifed and directed.

S&F 18/19mm thick prelaminated particle board interior grade one side laminated with decorative choice laminations and other side balancing white laminatin fixed with screws to timber frame work as in shelves/ kitchen cupboard/almirah shutters / almirah internal partation wall including fitting of aluminume handle, stainless steel 75mm hinges , hasp and stapple etc complete all as specifed and directed.

Dismantling boarding, fibre or pulp, insulation etc. in insulation boards slabs, blankets any thickness incl cover fillets complete all as specifed and directed.

S&F 15mm thick 2nd class soft wood clean sawn boarding as in eaves board fixed with nails in any situation complete all as specified and directed.

Gl frame work Size of grid 605 x 605mm for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed.

S&F 12 mm thick Gypsum board of size 600mm x 600mm as in ceiling fixed on GI frame work complete all as specified and directed.

M&L applying two coat of synthetic enamelled paint over one coat of pink primer including preparation of new wood surfaces of any description not otherwise described over 10 CM girth or width complete all as specified and directed.

M&L applying two coat of synthetic enamelled paint over one coat of red oxide primer including preparation of new steel surfaces of any description not otherwise described over 10 CM girth or width complete all as specified and directed.

M&L applying one coat of synthetic enamelled paint including preparation of old treated wood surfaces of any description not otherwise described over 10 CM girth or width complete all as specified and directed.

M&L Non - skid Ceramic coloured tiles not less than 8 mm thick area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm as in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including15mm thick rendering in CM(1:6), complete all as specified and as directed.

M&L Precast cement concrete louvers and jallies, 45mm thick (measured solid) type B-0 1:2:4 (using 12.5mm graded crushed stone aggregate) set in cement mortar 1:4 including all mouldings but excluding frame (Precast frame shall be measured seperately) complete all as specified and directed.

M&L 15mm thick rendering on wall in CM 1:6 on fair faces of brick work and finishing the surface even and smooth with out using extra cement, complete all as specified and directed.

M&L 15mm thick rendering on wall in CM 1:4 on fair faces of brick work and finishing the surface even and smooth with out using extra cement, complete all as specified and directed.

Dismantiling of water tanks of capacity exceeding 500 and not exceeding 1000 ltrs including all necessary fittings complete all as specified and directed.

S&F 1000 ltrs capacity PVC rotational moulded polyethylene water storage tanks double layer made (cylindrical vertical with closed top) hoisted and fixed in position all as spd in SSR part-I, complete all as specified and directed.

S&F in repairs 15mm dia brass stop valves chromium plated, fancy type with long shank and cup concealed type screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union complete all as specified and directed.

S&F in repair soap dish, vitreous China white, approximate size 160x160x90mm, complete all as specified and directed.

Taking down carefully copper/aluminium point wiring (light, fan, light & power socket) complete with fittings and fixtures such as switches,ceiling rose ,pendents ,regulators,socket,lampholders brackets,bulk head fitting,tube lights etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and also making good distrubed surfaces of wall,floors etc complete all as specified and directed.

M&L for One light/Fan point controlled by one switch 5 Amps one way using cable (1.5 Sqmm for phase and neutral and 1.5 sq mm earthing) point wiring with FRLSH cable PVC insulated (red for phase and black for neutral) unsheathed, multi stranded copper conductor 1100 volt grade in and including not less than 2mm thick PVC concealed conduit with all accessories and earth continuity connected to common earth duly accommodate modular GI box surface/ flush type with modular white cover plate with frame for mounting fittings such as switches, sockets, fan regulators etc complete all as specified and directed for one light/fan /bell point controlled by one switch & making good to disturbed surface of wall, match to existing wall surface etc all as directed. Note : modular box surface/ flush type with modular white cover plate with frame will be measured and paid separately, complete all as specified and directed.

Description all as per item No 101 but one multipin 5/6 amps socket outlet on same board complete all as specified and directed.

Description all as per item No 101 but one multipin 5/6 amps socket outlet on independent board complete all as specified and directed.

Description all as per Item Srl No 101 above but for one socket outlet 15 Amps on Independent board using cable (2.5 Sq mm for Phase & neutral and 2.5 Sq mm for earthing), complete all as specified and directed.

S&F modular switch piano button flush type, single pole one way 6 amps complete all as specified and directed.

S&F modular socket 6A, 2/3 pin combined 2 module complete all as specified and directed.

S&F modular switch piano button flush type, single pole one way 16 amps complete all as specified and directed.

S&F Modular socket 6A/16A, 2/3 pin combined 2 module complete all as specified and directed.

S&F ceiling rose surface bakelite 3 terminals 65 x 50mm complete all as specified and directed.

S&F Fan step modular regulator, 120W - 2 module complete all as specified and directed.

S&F White cover plate with frame, 3 module, complete all as specified and directed.

S&F White cover plate with frame, 4 module, complete all as specified and directed.

S&F White cover plate with frame, 8 module, complete all as specified and directed.

S&F Metal flush box 3 module, complete all as specified and directed.

S&F Metal flush box 4 module, complete all as specified and directed.

S&F Metal flush box 8 module, complete all as specified and directed.

S&F in replacement LED Lights fitting 20 watt,220V, AC Decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

S&F in replacement angular type Lamp holder PVC policarbonate type with back plate including Lamp 7Watt complete all as specified and directed.

Taking down ceiling fan, sealing cable end, dismantling blades and removing fan and blades to store, complete all as specified and directed.

Hanging only ceiling fan (M.D. supply) and connecting up including provision of cable from ceiling rose or connector to fa, complete all as specified and directed.

S&F in replacement sheet metal enclosures for MCBs, single pole and neutral, 12 ways 240 Volts double door type complete all as specified and directed.

S&F in replacement sheet metal enclosures for MCBs, single pole and neutral, 4 ways 240 Volts double door type complete all as specified and directed.

S&F in replacement distribution board iron clad TPN DB, double door with IP-43 1K-09 protection suitable for MCB as incommer and MCB as outgoing 415 Volts 3 phase 50 C/s 6 way, complete with appropriate size copper bus bar complete including cutting chases to wall for fixing DB and making good the disturbed wall surface all as required at site or complete all as specified and directed. (Note: MCB's will be measured and paid seperately under relevent items)

S&F in replacement MCB SPN 40 to 63 Amp, type 'C'10KA, 240 Volts, complete all as specified and directed.

S&F in replacement MCB SP 5 to 32 Amp, 'C'10KA, 240 Volts, complete all as specified and directed.

M&L earthing complete with galvanized steel earth plate electrode 60 x 60cm x 6 mm thick burried directly in ground vertically to a depth not less than 2.25 mtr deep below GL with top edge of the plate not less than 1.5 mtr below normal GL and connected to earth plate surrounded by 15 cm thick packed layers of charcoal dust and common salt and connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvd iron or steel and thimbles and other end of the earth wire connected to DB and protected by galvd iron or steel pipe light grade 15 mm bore and water pipe 20mm bore GI light grade with funnel and wire mesh, including all necessary excavation and earth work PCC chamber in cement concrete 1:3:6 type C-2 and RCC cover and all as shown in electrical plate No 3 of MES schedule Pt I of 2009 including dismantling old earthing. Note : RCC pit cover shall be pre-cast of RCC (1:2:4) type B-I , 80mm thick reinforced with XPM weighting not less than 4 KG/sqmm in lieu of CI cover.

S&F in repairs sub main wiring with two single core FRLS, PVC insulated, stranded, unsheathed cable copper conductor with size 10 Sqmm and drawing through & including Non metallic PVC conduit concealed in wall including earth continuity conductor of size 10 Sqmm PVC insulated unsheathed stranded copper conductor cable and connected to earth dolly to be drawn in concealed PVC conduit including connecting to main board complete all as specified and directed.

NOTE :- An amount of Rs. 130330.00 on account of Credit Schedule for Schedule 'A' Part-II shall be deducted from total quoted amount of BOQ to arrive at the contract sum.

M/S SHIMAR STAR GLACIER (BID ID -3429359)

JK BUILDERS AND ENGINEERS (BID ID -3429059)

rafiq trading co (BID ID -3430032)