Construction of 11/0.4 K.V. Sub-Station (New 100 K.V.A. Transformer) at Shamnan Garden, Tube well No.05, Near Sachin Gupta Factory, Kudha wala Transformer, Kala Pahad, Chor Ghati Petrol Pump in the area of E.U.D.D.-Rajajipuram, LESA CIS Gomti, Luckn

Amount

Safe carriage, loading and unloading of following material from ESC Daliganj, Lucknow to work site/J.E. dump store.

11/0.4 K.V. 100 K.V.A. Transformer.

11 K.V. S.T. Pole 11 Mtr. long.

11 K.V. PCC 8.5 Mtr. long.

11 K.V. XLPE Cable 3X70 Sq.mm.

11 K.V. LT ABC (3X120+1X95+1X16 Sq.mm.)

Fabrication, Erection of Double Pole Structure on 11 mtr. long STP with necessary clamps, accessories required including fixing of Top Channel 125X65X6 mm. (2240 mm long) 01 nos., Dropper Channel 100X50 mm. (2028 mm long) 01 nos. with arrangment of fixing of 06 nos. 11 K.V. Pin Insulators. Cross Bracing set of MS Angle 01 Nos. Grouting of 02 Nos of STP with cement, sand and brick ballast in ratio 1:4:8 (2X0.9 Cu.Mtr) and making plinth upto the height of 300 mm from ground. Painting of poles with primer and enamel paint as per RESPO specification complete in all respect. Providing Danger board, Name plate & Barbed wire. Earthing of both the poles.

Erection of Single Pole on 11 mtr. STP with fixing of necessary clamps and other accessories required for stringing along with plinthing & grouting of STP with cement, sand and brick ballast in the ratio 1:4:8 (0.9 Cu.Mtr each) upto the height of 300 mm. from the ground level.

Dragging of P.C.C. 8.5 Mtr. Pole to pit site, digging of pit erection and grouting (as per RESPO norms) of 11 K.V. 9/11/8.5 mtr. Long P.C.C. pole with fixing of necessary items, such as V-type X-arm, F-Bracket, 11 K.V. Pin/Disc insulator, guarding angle (1.8 mm. 65X65X6 mm.) with nuts & bolts its ramming as per RESPO specification. Only pole & insulator shall be supplied by the department.

Placing of 100 K.V.A. healthy Transformer from out side of yard with the help of crain and T & P. with required other pettey items for work.

AB Conductor Stringing & sagging of 3 phase with necessary clamps, Eye hook, Suspension clamp, A-B type connector etc. on ABC New line as per RESPO specification and direction on E/I. ABC shall be supplied by department.

1 Material supplied by Department - Transformer, S.T.Pole, PCC Pole, XLPE Cable, ABC etc. 2 Material supplied by Contractor - Civil material, steel sections,Aluminium Lug, Coppe "L" Piece, Clamps,Nuts & Bolts & other pettey items required for work. Note :- 1 All the material provided by contractor shall be as per norms of UPPCL/RESPO. 2 One carriage including loading/unloading from dump site to pit site is included in scope of work 3 During execution of work all risk will be of the contractor. 4 Contractor will provide all T & P, vehicle and man power. 5 All the old and used material should be taken on book. 6 The quantity may be vary ±10%.

SINGH ENTERPRISES

SYED TRADERS