Establishing 2x20MVA, 110/11kV Sub-station at Torehalli and Construction of 110kV LILO line on DC towers using Panther Conductor from existing 110kV Nittur-Gubbi SC line to the proposed 110/11kV Sub-station at Torehalli for a distance of 1.368kms with in Gubbi Taluk, Tumakuru District on PTK Basis including Supply of all matching Materials/Equipments (Excluding Supply of 11kV Switchgear) and Erection (Including Dismantling and Civil Works) of all Materials/ Equipments, Testing and Commissioning

Station Supply Portion

Power Transformer:

20 MVA, 110/33-11kV, Delta/Star, Dyn11, 3-Ph, 50Hz, Core Type, 2 Winding Delta/Star transformer, vector group DYn11 with OLTC ONAN/ONAF with fan control cubicle, RTCC Panel, firs...

Nitrogen Injection fire extinguishing system-supplying, erection & incluidng civil Engineering works, soak pit etc., as per the recommendaion of the supplier of the fire lighting system for Power Tran...

Circuit Breaker :

SF6 Gas circuit breaker with Semi-Pneumatic / Pneumatic operated / Spring type operating mechanism, including mounting Structures arrangements with rigid, bi-metallic terminal conn...

Isolators : Isolators including marshalling box and suitable terminal connectors, as required as per technical specification with solid core cylindrical post insulators:

A. 110KV, 1250A, 40KA Class D...

ii.Upright mounting type without Earth switch. .(Live point height 4600mm)

iii.Upright mounting type without earth switch. (Live point height 6350mm)

Note:Terminal connectors for Isolators shall be as follows:

Rigid type suitable for Moose ACSR- 27 Nos

Flexible type suitabl...

B. 11 kV Isolators:

11KV isolators, Double Break 400A, 25KA capacity with rigid bi-metallic terminal connectors suitable for coyote ACSR for Capacitor Bank

11 kV isolator, single break 400 A, 25 KA capacity with Roaster switch, with rigid bimetallic terminal connector suitable for coyote ACSR.

CURRENT TRANSFORMER : Current transformers including marshalling boxes, Single phase,oil filled outdoor type with rigid bimetallic terminal connectors suitable for Moose ACSR conductor as per technica...

110 kV class, 40 KA, CT of ratio 600 -400/ 1-1-1A for Lines

Core - 1 : Vk-1100 V at 600A, Rct 5 ohm at 600/1A, Accuracy class PS-Dist/Dif

Core- 2 : 10 VA, Accuracy class 0.2s- Metering

11kV Class, 25kA, NCT of ratio 1200-800/1-1-1A for REFR Protection (of similar rating and ratio as that of Incomer of 11kV Switchgear) with terminal connector suitable for 2 Nos. of 75mmx6mm Copper fl...

VOLTAGE TRANSFORMER : Single phase, oil filled outdoor type with rigid bimetallic terminal connectors suitable for Moose ACSR with marshalling box KIOSK as per technical specifications

110 kV class 1...

SURGE ARRESTOR : (Porcelain housing) metal oxide, Gapless type with rigid bimetallic connectors suitable for Moose ACSR as per technical specifications

i) 96 kV, 10 KA, SM type -For overhead Lines

iii) 9 kV, 10 KA with connector and clamp

Capacitor Bank: Design, Engineering, supply, erection, testing & commissioning of 2.9 MVAR, 12.1 kV Capacitor Bank, star connected, Double Bank with internal fuses, terminal connectors with suitable n...

Control and Relay Panel complete as per specifications:

Simplex type control and relay panels complete as per specifications.

a.For Power Transformer 110/11 kV

b.For 110 kV Transmission line

1) All the C&R panels and associated panels shall be of one and same make for uniformity and interchangeability of components.

2) The accuracy class of metering...

Total Weight of Station structures & Mounting Structures (excluding Bolts & nuts)

Total Weight of Bolts & nuts of Station structures & Mounting Structures

11 kV ODS and take of structure:

Supplying of Double pole structure with 9.5 Mts. RCC poles WL 300 Kgs for mounting 11 kV 400 A Roaster Isolators and 9 kV, 10 KA surge arrestor (3 No.) complete set ...

BUS BAR FORMATION :

Rigid bus with taps & clamps:

i) Aluminium pipe conforming to 6340WP of IS - 5082 / 1969 (BS I600-Sch. 40) inlcuding fixing of clamp, connector jumper ,corona ring etc., complete & as per technical...

b) 63mm size connecting isolator to vertical tap

ii) Straight taps suitable for 63mm Aluminium tube (BS-1600) of 1750mm vertical height for vertical portion & cross bus on 110KV side with rounded off end.

iii) A) Post insulator clamps suitable for 75 mm Aluminium pipe & Post insulator solid core type - 110kV side

iv) Corona Bell Suitable for Aluminium Pipe of size 75mm on 110 kV

Post insulator Solid core Insulator 110 kV, 1 Unit/stack

C Type wedge connector suitable for Moose - Panther (Line)

Post insulator clamp suitable for Moose ACSR and 110kV Solid core insulator.

Auxiliary Transformer :

Supply of Station Auxiliary Transformer-copper winding with oil, outdoor type, 100 kVA, 11 kV/433 V, 3 Ph, Vector group Dyn 11 off load tap changer(5 taps) with step voltage ...

Supplying of DP structure with 9.5 mtr RCC poles, 11 kV 400 A double break isolators, 9 kV, 10 KA surge arrestor (3 No.), H-Frame along with DOLO/HG fuse unit, LTprotection kit/LTD box, LT Trivector m...

LTAC Distribution panel ( Indoor) comprising of Volt meter, Ammeter & 1 no of ETV meter, 1 I/C MCCB 200A + 2 nos 3 phase, 63A OG HRC fuse + 2 nos 3 phase 32A OG HRC fuse + 6 nos 3 phase 16A HRC fuse e...

AC Distribution box (outdoor) Single front type with 6 terminals 1200 x 1350 x 300 mm one I/C of 100 A MCCB 20 KA+ 6 O/G 16 A MCB +1 O/G of 100 A HRC Fuse panel 415 V outdoor type

LT Power armoured UG cable as per specification:

a) 1.1 kV class 4 X 95 Sq mm L T Aluminium Cable with glands/lugs/ferrules.

b) 1.1 kV class 4 X 25 Sq mm Copper Cable with glands/lugs/ferrules.

c) 1.1 kV class 4 X 10 Sq mm Copper Cable with glands/lugs/ferrules.

STATION BATTERY & BATTERY CHARGER :

110V, 200AH Battery set (Plante/Grid/Nickel Cadmium Type) with cells & accessories as per technical specifications.

Battery charger- suitable for '1 X 110 V, 200 AH, Battery set (Plante/Grid/Nickel Cadmium Type)consisting cells as per specifications- 15 A float and 30 A boost (with float and boost battery charger ...

LT DC Distribution panel ( Indoor) as per Technical specification comprising of Earth fault indicator, Indication circuit for AC main failure, 1 No 100A SFU for IC + 12 nos., 32A SFU for OG etc,. comp...

1.1 kV Grade PVC Insulated armoured copper control cables of sizes,with Lugs/Ferrules/Gland as per technical specifications.

19C x 2.5 Sq.mm

10C x 2.5 Sq.mm

(For station Yard Lighting -1000Mtrs)

11KV U.G. Cable with the required cable terminations at both ends as per specifications.

i) One run of 11kV, XLPE 95 sq.mm Al., 3 core cable - (to be run for Auxiliary Transformers from 11KV switch...

ii) 11KV XLPE cable, 1000Sq. mm. Aluminium cable from 110/11KV transformers to 11KV Switchgear.

iii) 11KV XLPE cable, 240Sq. mm. Aluminium cable 3 Core to be run from 11KV Switchgear to 11kV take off DP Structure.

iv) Heat shrinkable type Cable termination kits suitable for 1 x 1000 Sq.mm XLPE cable ( Indoor type )

v) Heat shrinkable type Cable termination kits suitable for 1 x 1000 Sq.mm XLPE cable (Out door type)

vi) Heat shrinkable type Cable termination kits suitable for 3 x 240 Sq.mm XLPE cable ( Indoor type )

vii)Heat shrinkable type Cable termination kits suitable for 3 x 240 Sq.mm XLPE cable (Out door type)

viii) Heat shrinkable type Cable termination kits suitable for 3 x 95 Sq.mm XLPE cable ( Indoor type )

ix) Heat shrinkable type Cable termination kits suitable for 3 x 95 Sq.mm XLPE cable (Out door type)

FIRE FIGHTING EQUIPMENTS WITH NECESSARY MOUNTING STANDS:

Foam type extinguisher (Mechanical) 50 Ltr. capacity

Foam type extinguisher (Mechanical) 9 Ltr. capacity

Water type (gas pressure type) 9 Ltr. capacity

Carbon di-oxide type 4.5 kg Capacity

Sand type G.I Buckets 15 Ltr. Capacity

Steel stands for above to have 4 buckets to each stand.

Maintenance Tools and Plant:

Portable (mobile) oil pumps (1/2 HP Air pump 500 to 1000 gallons)

Telescopic ladder Aluminium 6 Mtr. Height

Ring spanner set -12 nos. per set

Tube spanner set--12 nos. per set

Pipe wrench 24 inch

Pipe wrench 18 inch.

Hydraulic crimping tools up to 1000 Sq.mm

Rubber hand gloves (15 kV tested)

Rechargeable 5W LED hand torch

Insulated cutting plier 12 inch size

Insulated cutting plier 8 inch size

Line live tester AC/DC 500 V

Screw driver 18"

Screw driver 12"

Chain pulley block 5 ton capacity

Hydraulic jack 5T capacity

Pipe derrick suitable for lifting 3 MT and lift of 6 Mtr. Height

Box spanners-12 nos. per set

Transil oil di-electric break down (with 2.5 mm gap 0-60 kV) Tester.

Insulation megger 2.5 - 5 kV

Insulation megger 500 V

SF-6 gas leak Detector

Multimeter electromechanical

Multimeter Electronic

DC Voltmeter range -5V to + 5V

Hydrometer syringe suitable for vent holes

Specific gravity correction chart

Thermometer with wall mounting holder

Protective goggle

Acid resisting jars (4 pint capacity)

Rubber shoes knee height

Grounding sticks extendable upto 18 ft

Wall mounting type holder for hydrometer

MISCELLANOUS ITEMS

Rubber mats 1000 mm x 1000 mm x 10 mm size

Shock treatment charts, hard board, liminated with coloured pictures & literature both in Kannada & English.

Water filter / Water purifier : Wall mounting type (Aqua-guard type).

Sub-station name board duly painted.

Fixograph of size 1.5m x 2.5m with English / Kannada alphabets.

Door locks 7 Levers-Reputed & Approved Quality

Danger board(prohibited) with support structure including fixing in front of the gate

Equipment name plates and earthing name plates including fixing at outdoor yard

Furniture for Control Room Staff and maintenance staff

Steel Almirahs 6 1/2 feet

Steel Almirahs 6 1/2 feet with glass panel doors

Officers tables

Steel Slotted angle rack (big Size)

Steel Slotted angle rack (small Size)

Executive revolving chairs

S Type Arm Chairs

Steel folding Chairs

Equipments for establishing SCADA Communication as per technical specifications :

i) Remote Terminal Unit (RTU)

ii)Data Concentrator Unit (DCU)

iii) 2 kVA online UPS (230 V AC 1 phase 50 Hz) with Battery set

iv) Cables -Supplying

a.Current Cables-Copper Core with c/s 4.0 sq.mm Multistrand 4 Core

b.Voltage Cables-Copper Core with c/s 2.5 sq.mm Multistrand 4 Core

c.Signal Cables-armoured Copper Core with c/s 0.5 sq.mm Multi strand 10 Core

d.Control Cables- Copper Core with c/s 1.5 sq.mm Multi strand 10 Core

e.Supply Cables-Copper Core with c/s 4.0 sq.mm Multi strand 3 Core for AC input to UPS & UPS to RTU,conforming to KPTCL specifications.

f.Supply Cables-Copper Core with c/s 32.0 sq.mm Multi strand for Battery conforming to KPTCL specifications.

Note : Satellite Communication required will be arranged by SLDC.

STATION & YARD LIGHTING (OUTDOOR) (To be designed, assessed & quoted by the bidder):

Supply and installation/ Fixing/ Provision of Outdoortype Thermoplastic Modular Panel enclosure with transpare...

Supply &Fixing of LED Street light luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moul...

Station Erection Portion

Power Transformer:

20 MVA, 110/33-11kV, Delta/Star, Dyn11, 3-Ph, 50Hz, Core Type, 2 Winding Delta/Star transformer, vector group DYn11 with OLTC ONAN/ONAF with fan control cubicle, RTCC Panel, firs...

Circuit Breaker :

SF6 Gas circuit breaker with Semi-Pneumatic / Pneumatic operated / Spring type operating mechanism, including mounting Structures arrangements with rigid, bi-metallic terminal conn...

Isolators : Isolators including marshalling box and suitable terminal connectors, as required as per technical specification with solid core cylindrical post insulators:

A. 110KV, 1250A, 40KA Class D...

B) 11 kV Isolators

i) 11KV isolators, Double Break 400A, 25KA capacity with rigid bi-metallic terminal connectors suitable for coyote ACSR for Capacitor Bank.

ii) 11 kV isolator, single break 400 A, 25 KA capacity with Roaster switch, with rigid bimetallic terminal connector suitable for coyote ACSR.

CURRENT TRANSFORMER : Current transformers including marshalling boxes, Single phase,oil filled outdoor type with rigid bimetallic terminal connectors suitable for Moose ACSR conductor

i) 110 kV clas...

11kV Class, 25kA, NCT of ratio 1200-800/1-1-1A for REFR Protection (of similar rating and ratio as that of Incomer of 11kV Switchgear) with terminal connector suitable for 2 Nos. of 75mmx6mm Copper fl...

VOLTAGE TRANSFORMER : Single phase, oil filled outdoor type with rigid bimetallic terminal connectors suitable for Moose ACSR with marshalling box KIOSK as per technical specifications

110 kV class 1...

SURGE ARRESTOR : (Porcelain housing) metal oxide, Gapless type with rigid bimetallic connectors suitable for Moose ACSR.

i) 96 kV, 10 KA, SM type -For overhead Lines -06Nos

ii)96 kV, 10 KA, SM type-Fo...

iii)9 kV, 10 KA with connector and clamp

Control and Relay Panel complete: Simplex type control and relay panels complete as per specifications.

i) For Power Transformer 110/11 kV-02Nos

ii)For 110 kV Transmission line-02Nos

Total Weight of Station structures & Mounting Structures including Bolts & nuts.

Note: For Split up refere Techno-Commercial sheet.

11 kV ODS and take of structure

Erection of Double pole structure with 9.5 Mts. RCC poles WL 300 Kgs for mounting 11 kV 400 A Roaster Isolators and 9 kV, 10 KA surge arrestor (3 No.) complete set .

BUS BAR FORMATION :

Main bus/cross bus (all the three phases in a segment) using with Single Moose Conductor with fixing of insulator spacers, levelling of string conductors to the required height ab...

Rigid bus with taps & clamps

Aluminium pipe conforming to 6340WP of IS - 5082 / 1969 (BS I600-Sch. 40) inlcuding fixing of clamp, connector jumper ,corona ring etc., complete & as per technical speci...

Post insulator Solid core Insulator 110 kV, 1 Unit/stack

Auxiliary Transformer

Erection of Station Auxiliary Transformer-copper winding with oil, outdoor type, 100 kVA, 11 kV/433 V, 3 Ph, Vector group Dyn 11 off load tap changer(5 taps) with step volta...

Erection of DP structure with 9.5 mtr RCC poles, 11 kV 400 A double break isolators, 9 kV, 10 KA surge arrestor (3 No.), H-Frame along with DOLO/HG fuse unit, LTprotection kit/LTD box, LT Trivector me...

LTAC Distribution panel ( Indoor) comprising of Volt meter, Ammeter & 1 no of ETV meter, 1 I/C MCCB 200A + 2 nos 3 phase, 63A OG HRC fuse + 2 nos 3 phase 32A OG HRC fuse + 6 nos 3 phase 16A HRC fuse e...

AC Distribution box (outdoor) Single front type with 6 terminals 1200 x 1350 x 300 mm one I/C of 100 A MCCB 20 KA+ 6 O/G 16 A MCB +1 O/G of 100 A HRC Fuse panel 415 V outdoor type

LT Power armoured UG cable as per specification

i) 1.1 kV class 4 X 95 Sq mm L T Aluminium Cable with glands/lugs/ferrules- 200mtrs

ii)1.1 kV class 4 X 25 Sq mm Copper Cable with glands/lugs/ferrule...

STATION BATTERY & BATTERY CHARGER :

110V, 200AH Battery set (Plante/Grid/Nickel Cadmium Type) with cells & accessories as per technical specifications

Battery charger- suitable for '1 X 110 V, 200 AH, Battery set (Plante/Grid/Nickel Cadmium Type)consisting cells as per specifications- 15 A float and 30 A boost (with float and boost battery charger ...

LT DC Distribution panel ( Indoor) as per Technical specification comprising of Earth fault indicator, Indication circuit for AC main failure, 1 No 100A SFU for IC + 12 nos., 32A SFU for OG etc,. comp...

1.1 kV Grade PVC Insulated armoured copper control cables of sizes,with Lugs/Ferrules/Gland as per technical specifications

i) 19C x 2.5 Sq.mm-1500mtrs

ii) 10C x 2.5 Sq.mm-1500mtrs

iii) 4C x 6 Sq.mm-1...

11kV Switchgear

11kV, 25kA, Metal Clad VCB Switchgear (1600A for Incomer and 1250A for feeders), outdoor type, each comprising of 2IC+12F+1BC+4CB+1AP (Remote Announciation cum Control panel) with CTs...

11KV U.G. Cable with the required cable terminations at both ends.

i) One run of 11kV, XLPE 95 sq.mm Al., 3 core cable - (to be run for Auxiliary Transformers from 11KV switch Gear to Auxiliary Tra...

A.Heat shrinkable type Cable termination kits suitable for 1 x 1000 Sq.mm XLPE cable:

a.Indoor type - 14Nos.

b.Out door type-14Nos

B.Heat shrinkable type Cable termination kits suitable for 3 x 240 Sq.mm XLPE cable ( Indoor type )

a.Indoor type - 15Nos.

b.Out door type-15Nos.

C.Heat shrinkable type Cable termination kits suitabl...

Equipments for establishing SCADA Communication as per technical speciifcations :

i. Remote Terminal Unit (RTU)

ii. Data Concentrator Unit (DCU)

iii. 2 kVA online UPS (230 V AC 1 phase 50 Hz) with Battery set

iv.Integration of RTU, DCU and UPS with field equipments

v.Cables - Laying

a.Current Cables-Copper Core with c/s 4.0 sq.mm Multistrand 4 Core- 100mtrs.

b.Voltage Cables-Copper Core with c/s 2.5 sq.mm Multistrand 4 Core-100mtrs

c.Signal Cables-armoured Cop...

Earth Mat formation :

Supplying and laying of MS Flats of 75 x 12 mm sizes, welding and applying ACB paint to welded portion as per the drawing/standard specification and consolidation.

Grounding of equipment with 75 x 12 mm G.I. Flat and connecting equipment to the earthmat/ground pit. Each point of earthing with all formation works like bending, twisting, drilling of holes and conn...

Providing MS Round rod 40mm dia, 1.075 metre long earthmat

spikes including heating, bending top 50/75 mm overlap flattening and making spike edge at one end driving into the earth below the ground le...

Grounding of equipment by providing cast iron pipe of 100 mm ID 13 mm thickness, 2.75 metre long with 2 part clamp out of G.I. Flat 50 X 6 mm continuously welded alround the pipe using cast iron weldi...

Supplying and fixing 450mm dia x 450mm height 1.5" to 2" Hume pipe collars for earth pits including all lead & lifts etc.,

Line Supply Portion

Fabrication, Prototype Inspection and Supply of galvanised 220kV & 110kV Transmission Line Towers as per Technical Specifications.

Total weight of the Towers (High Tensile Steel) excluding Bolt &...

Fabrication, Prototype Inspection and Supply of galvanised 220kV & 110kV Transmission Line Towers as per Technical Specifications.

Total weight of the Towers (Mild Steel) excluding Bolt & Nuts.

Supply of Bolts, Nuts and washers etc., (galvanised) required for 220kV & 110kV Transmission Line Towers as per Technical Specifications.

Total weight of the Bolt & Nuts.

Note - 1) Rate to be qu...

Tower accessories :

Phase plate (Set of 3 No.)

Earth bond 450 mm long

Grounding of towers including cost of 40 mm dia 2.5 mm thick,class 'C' G.I. Pipe of 3 metres length as per specification with 50 X 6 mm GI Flats 3 metre long, salt, charcoal, including excavation char...

Conductor & Earth wire :

i) Drake ACSR Conductor

(Existing B1 B2 DC line crossing along with replacement of towers at Tower no.577-578. i.e., 0.137+0.175=0.312km and Tower no.904-905 i.e., 0.115+0....

ii) Panther ACSR Conductor with 1.5% Sag.

iii) Lynx ACSR Conductor with 1.5% sag

iv) 7/3.15 mm GI Ground wire Plain Terrian

I) Insulator strings and clamps for Panther ACSR conductor with Hardwares and Arcing Horns as per technical specifications (110kV Line);

A. Tension insulator strings consisting of any one of the fol...

B. Suspension insulator strings consisting of any one of the following:

a. Insulator string consisting of 1X7nos. of 90kN Disc insulators

b. Porcelain long rod...

II) Insulator strings and clamps for Lynx ACSR conductor with Hardwares and Arcing Horns as per technical specifications (110kV Line);

A. Tension insulator strings consisting of any one of the follo...

III) Insulator strings and clamps for 220kV Drake ACSR conductor with Hardwares and Arcing Horns as per technical specifications (220kV Line);

A. Tension insulator strings consisting of any one of the...

IV.Insulator Hardwares suitable for Panther/Lynx/Drake ACSR Conductor as per Technical Specification:

i) 110kV Clamps, Arcing Horns and Hardwares suitable for Single Tension String fittings for Pan...

ii) 110kV Clamps, Arcing Horns and Hardwares suitable for Single Suspension String fittings for Panther Conductor.

iii) 220kV Clamps, Arcing Horns and Hardwares suitable for Single Tension String fittings for Drake Conductor.

iv) 110kV Clamps, Arcing Horns and Hardwares suitable for Single Tension String fittings for Lynx Conductor.

Accessories for Panther ACSR Conductor :

MSC Joints suitable for Panther ACSR

Repair sleeves suitable for Panther ACSR

P G Clamps suitable for Panther ACSR

Vibration dampers for Panther ACSR

Pre formed armour rods suitable for Panther ACSR

Wedge Connector suitable for Panther to Lynx ACSR

Accessories for Lynx ACSR Conductor :

P G Clamps suitable for Lynx ACSR

Vibration dampers for Lynx ACSR

Accessories for Drake ACSR Conductor :

MSC Joints suitable for Drake ACSR

Repair sleeves suitable for Drake ACSR

P G Clamps suitable for Drake ACSR

Vibration dampers for Drake ACSR

Hardware for Earthwire :

MSC Joints suitable for Ground conductor

Repair sleeves suitable for Ground conductor

Single Tension clamps ( bolted type) suitable for Ground conductor

P G Clamps suitable for Ground conductor

Line Erection Portion

Check Survey and Towers Spotting.

Check survey using their own equipment for 110kV Plain terrain

1.The survey covers the scope as defined in Technical Specifications & As per volume -VI of Com...

Stringing of ACSR Conductor without allowing the conductor to touch the ground and without damaging the conductor as per specifications.

Paving out conductor from anchor to anchor normally spaced at 5...

2.Panther ACSR Conductor in Plain Terrian

3. Lynx ACSR Conductor in Plain Terrian

4. 7/3.15 mm GI Ground wire Plain Terrian- for 220kV Line

5.7/3.15 mm GI Ground wire Plain Terrian for 110kV Line with Panther ACSR Conductor

6.7/3.15 mm GI Ground wire Plain Terrian for 110kV Line with Lynx ACSR Conductor

Erection of Transmission Line Towers (including tower accessories etc., except GI angle, Barbed wire & Grounding materials) as per specifications.

1.The Bidders are required to quote the rates...

Supplying and fixing AC devices:

i) Supplying and fixing GI angle iron 45 x 45x5mm (1Mtr length) with cleats, bolts nuts as per specification and fixing above 0.5 mts length each at inner and outer s...

ii) Supplying and fixing Barbed wire as per specification

Grounding of towers including cost of 40 mm dia 2.5 mm thick,class 'C' G.I. Pipe of 3 metres length as per specification with 50 X 6 mm GI Flats 3 metre long, salt, charcoal, including excavation char...

Dismantling Portion:

Note : 1) The Released materials shall be transported to the nearest Major Works Stores of KPTCL.

2)The rates quoted for releasing/dismantling shall also include the charges for ...

ii.220KV DA+3 Tower at Tower No. 577 - 578 and 904 - 905 (2.763MT/Tower)(02Nos.)

iii.Releasing of Drake conductor

iv.Releasing of Lynx conductor

v.Releasing of Earth Wire

Mandatory Spares Supply Portion

Circuit Breaker (CB)

Closing coil with resistor (For one Complete Circuit Breaker)

a) for 145KV CB

Tripping coil with resistor (For one Complete Circuit Breaker)

a) for 145KV CB

Terminal Pad (For one Complete Circuit Breaker)

a) for 145KV CB

Terminal Connector (For one Complete Circuit Breaker)

a) for 145KV CB

SF6 Gas (40% of total gas Qty. for Sub-Station)

Copper Contract fingers male & female (For one Complete Isolator)

a) for 123KV Class

Terminal Connector (For one Complete Isolator)

a) for 123KV Class

Terminal Pad (For one Complete Isolator)

a) for 123KV Class

Station Civil Works Portion

Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and te...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Earth work excavation for pipeline trenches in all kinds of soils by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricadin...

Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading,...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/...

Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregates and fine...

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Construction of dry lean cement concrete Sub- base over a prepared sub-grade with coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm,aggregate cement rat...

Steel Fabrication: Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/...

Steel Fabrication: Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/w...

Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of appro...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS C...

Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)

Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in super structure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) in...

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...

Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m, and lift upto 1.5 ...

Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, includ...

Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and remo...

Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding,...

Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 m...

Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. compl...

Providing and fixing bright finished brass butt hinges with necessary screws etc. complete : 125x85x5.5mm (heavy type)

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitt...

30mm thick factory made polyvinyl chloride (PVC) door shutter made of a uPVC hollow section of size 60x30mm and wall thickness 2 mm (plus or minus 0.2 mm), with inbuilt decorative moulding edging on o...

Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance plus or minus 1mm), with wall thickness 2.0 mm (plus or minus 0.2 mm), ...

Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross- section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be...

Providing and fixing to existing door frames Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsatura...

Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastom...

Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead fr...

Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...

Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...

Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w...

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually co...

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Oval shape...

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS: 12701 marked, with cover and suitable locking arrangment and making necessary holes for inlet, outlet and ov...

Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plaster...

Constructing brick masonry chamber of internal dimension 450x450mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plaster...

Providing and fixing SFRC frame and cover conforming to IS 12592 (part-I)-1988 and IS 12592 (part-II)- 1991 with latest amendment, including cutting slabs to the required size for the opening and fixi...

Jelly Spreading (20-25 mm) : Supplying and providing jelly in the station yard of uniform thickness of 100 mm including the cost of materials, labour charges, required tools and plants etc., complete....

Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direct...

Fencing with G.I. barbed wire Angle iron post placed at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe wi...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe wi...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe wi...

Providing S&S RCC SPUN / VIBRATED CAST PIPES (REINFORCED) pipes NP-3 Class conforming to IS:458-1988 with latest amentments using ordinary portland cement, for sanitary works and conveying to work sit...

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of appro...

Providing and Applying CFTRI approved two component flexible polymer modified acrylic cementitious waterproofing coating with a mix ratio of (5 Liquid :7 Powder) to the RCC surface like Roof, bathroom...

Providing and laying 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nomin...

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 ...

Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding for Bathrooms: Toilet: Chemically exposed areas and jo...

Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding for Bathrooms: Toilet: Chemically exposed areas and jo...

Providing skirting, dadooing, rises of steps with white glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed ti...

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per

Providing and fixing PTMT stop cock of approved quality and colour 15 mm nominal bore, 86 mm long, weighing not less than 88 g

Providing and fixing Rainy dual capacity self-cleaning roof top rain water harvesting filter or equivalent filter of FL-500 specification suitable for a catchment area of about 500Sqm.

Providing, supplying to work site,Single Phase Submersible Pump Sets of 100mm dia (4 inch) suitable for bore well confirming to IS 8034-2000 specifications,with testing of as per instructions of engin...

Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required...

Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint ...

Providing and fixing Modular multi-diameter cable sealing system which is waterproof,fire proof& rodent proof consisting of frames,blocks and accessories to be installed wherever the electrical(power/...

Providing M-Sand : Supplying and filling in plinth, foundations / UG cable work with approved M-sand including watering, ramming, consolidating and dressing. The rate includes the cost of material, la...

Sinking borewell of 165mm dia. clear, using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF and above, in all strata of earth, including over burden upto 20M, fixing of casing pipes, co...

Sinking borewell of 165mm dia. clear, using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF and above, in all strata of earth, including over burden upto 20M, fixing of casing pipes, co...

Sinking borewell of 165mm dia. clear, using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF and above, in all strata of earth, including over burden upto 20M, fixing of casing pipes, co...

Sinking borewell of 165mm dia. clear, using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF and above, in all strata of earth, including over burden upto 20M, fixing of casing pipes, co...

Supply of ISI mark 175mm nominal bore,plain and steel casing pipe grade of steel Fe 410 of wall thickness conforming to IS 4270-2001 and latest ammendments, electrical resistance welded steel tubes, m...

Providing and laying at site of work MS casing caps as per IS 1239 (part- II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum...

Providing and fixing MS casing collars as per IS 1239 (part-II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum). The dimensi...

Geophysical investigation at site for sinking borewells for supplying drinking water to the habitation either through the Hand Pump MWS or P.W.S.S, by vertical electrical sounding by adopting Venner o...

Providing Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-2000 ; 3Phase, SS Bowl & Impeller with Low volt Motor as per specifications, to work site as per...

SUBMERSIBLE CABLE

Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990 with ISI Mark and as per its latest a...

PRESSURE GAUGE :

Supply and delivery at site of brand new best make pressure gauge bourdon type as per IS 778/1984 with ISI Mark and as per its latest amendments - Size 100 mm

Supply and delivery at site of brand new best make gate valve as per IS 778/1984 with ISI Mark and as per its latest amendments Size 50 mm

NON - RETURN VALVE :

Supply and delivery at site of brand new best make non-return valve as per IS 778/1984 with ISI Mark and as per its latest amendments Size 50 mm

ix) Control Panel BOARD-A:

Supply, installing,testing and commissioning COMMON control panel consisting of the following INCOMING:1 No set of Phase indicating lamps with SFU of suitable rating 1 No, A...

POWER CAPACITOR:

Supply and delivery at site best indigenous brand new power capacitor as per IS 2834/1986 with latest amendments with KPTCL authorities and erection, electrification and commissioning...

Supply and delivery at site delivery of best indigenous brand new MCB (Miniature Circuit Breakers) of required capacity as per IS 88228/1978 and its latest amendments and with ISI Mark of 6/10/16...

Erection elctrification & Commissioning works of pumpsets :

Labour charges for Erection, Electrification and commissioning of Pump sets, including aligning and balancing of all items including supp...

Erection of panel board & meter board Unit :

Labour charges for erection of outdoor type panel board and meter board units with all necessary materials and labour, tools and equipmentsincluding provi...

Main connections:

Providing main connection from pole PVC insulated sheathed steel wire cable in new trench as per IS 1554/ 1988 with latest amendments with ISI mark from KPTCL pole to meter board un...

Providing, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and ...

Earthing: Providing and fixing and wiring earth electrode for grounding circuits IC cutouts and other equipments on the meter board in the pit. The pits should be filled up with equal pro...

Point wiring using Copper wire without switch.

Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth ...

Point wiring using Copper wire without switch.

Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth w...

Point wiring using Copper wire without switch.

Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using copper PVC insulated multi strand 2x1.5Sqmm copper wire without...

Concealed Conduit System Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and runni...

Concealed Conduit System Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and runni...

Point wiring using Copper wire without switch.

Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth w...

Point wiring using Copper wire without switch.

Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth w...

Supplying 6A flush type socket and 6 A flush type SP switch either surface/flush mounting in existing gang box or in 4mm thick plastic sheet and fixing over a flush mounted wooden box and wiring using...

Supplying 6A flush type socket and 6 A flush type SP switch either surface/flush mounting in existing gang box or in 4mm thick plastic sheet and fixing over a flush mounted wooden box and wiring using...

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.32A DP Switch

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6/16A Universal Socket

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. TV/ Telephone Socket

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall ...

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 8...

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 1...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete. - 12" Sweep (300mm)

Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete. - 15" Sweep (450mm)

Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS-374-1979 and with double ba...

Fixing a ceiling/wall mounting fan of all capacities and all types to the existing 'S'' hook with fan regulator to the existing board together with supplying and fixing 5 A. ceiling rose, necessary le...

Fixing one exhaust fan after making a suitable notch in the wall and finishing with cement mortar and colouring to match the existing wall or brackets, with bolts and nuts and a 5 A, ceiling rose with...

Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of O...

Supplying of Switch disconnector fuse unit (TPN) HRC type (but without HRC fuses). With AC-23A duty and as per IS-13947 - 125Amps

Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase ...

Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase ...

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...

Supplying, fixing and wiring Residual current circuit breaker (RCCB) 240/450V upto 300mA sensitivity on existing wood/ panel board. 32-40 Amps 4 pole

Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C.

Supplying ......... amps rated 3phase with neutral bus bar using required capacity electrolytic alluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulat...

Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipments on the meter board using 40mm dia 2.90mm thick GI pipe 2.5 mtr long buried in a pit. The pit shoul...

Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc using 40mm dia 2.9mm thick 2.5 mtr long GI pipe with GI funnel with mesh and suitable size reducer fixed o...

Supplying, fixing and wiring 0 to 600Volts 96x96mm AC Voltmeter on existing panel/wood board.

Supplying, fixing and wiring 0 to 1500amps CT operated AC analog type Ammeter With out CT

Supplying and fixing Electronic Trivector Meter (ETV) suitable for operation LT operation and -CT operated meter in polycarbonate body in class 0.5 accuracy as per IS 14697 and completely wired

Supplying of feet -PVC Batten with integrated LED tube LED light fitting 1 x 4ft - 36/40 W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI greater than 8...

Supplying of feet -PVC Batten with integrated LED tube LED light fitting 1 x 2ft - 9/10 W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI greater than 80. ...

Fabricating supplying and mounting MS box made out ....SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped...

Supplying and Fixing of ---- mm dia class A GI pipe bracket upto 2 ms long bent at suitable angle and fixing to this bracket street light fitting of all capacities to GI or GI or rail or RCC pole / wa...

Supplying of recess mounting non integrated type LED down light 36W luminaire comprising of pressure decast/ extruded aluminium housing, with spring loaded false ceiling clA, LED of Power/COB with CCT...

Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50HzAC with latest micro controller based, digital read out of percentage leakage curr...

Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293. Stepped Fan Regulator Two Module

Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. 95 sqmm Long Barrel

Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes - 150 sqmm Long Barrel

Fixing all types and all capacities of fluorescent /falseceiling/ spot light/CFL/LED fittings indoor on the wall/ceiling/rafters/girders using 23/0.0076" twintwisted PVC insulated wires, required No...

Line Civil Works Portion

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Earth work excavation for Foundation by Mechanical means depth upto 1.50m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, includin...

Earth work excavation for Foundation by Mechanical means depth upto 1.50m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, includin...

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite /trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant I...

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

Steel Fabrication: Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/w...

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...