85901 SPECIAL REPAIR TO CERTAIN PORTIONS OF EXISTING ROAD WITH ROAD FURNITURE AT MILITARY INTELIGENCE TRAINING SCHOOL AND DEPOT (MINTSD) UNDER GE (SOUTH) PUNE

Amount

Repair to pot holes of any depth not exc. 1 Sqm each incl. sweeping free from dust and mud or water, scoring surfaces in roads, paths etc. cutting around edges to atleast 25mm in depth, making good by filling in screened and graded road metal, watering and well ramming (incl.supply of road metal) and making good by applying tack coat with bituminous primer (grade VG-10) @ 5 kg per XSqm putting in premixed semi dense asphaltic concrete (design mix) 25 mm consolidated thickness with 5.5% binder content of bitumen (grade VG-30) by weight of total mix laid with mechanical paver rolled and compacted to required camber and gradient with 8 to 12 ton power roller complete all as specified.

Scarifying or picking gravelled ,macadam or bituminious macadam surfaces in area exc 400 sqm exc 50mm and n exc 100mm deep and removing the same to a distance 50m and stacking where directed complete all as specified

M&L for 75mm thick WBM (compacted thickness) with Sand stone coarse aggregate of grading 2 (63 to 40mm size) or of grading 3 (50 to 20mm size) of grnite ,trap or basalt, spread, rolled and consolidated to required gradient and camber complete all as specified & directed.

M&L for Premix Bituminous macadam with binder content of bitumen (grade VG-30) @ 4% by weight of total mix laid/rolled and compacted to required gradient and camber (consolidated thickness 75 mm or less) complete all as specified and directed.

M&L for preparing black top surfaces by by brushing with wire brushes for removing caked mud etc ,sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc and applying venly tack coat with bituminious primer using paving bitumen (grade VG-10) @5 Kg per 10 Sqm on black top surface and providing bituminious premix asphaltic semi dense concrete (design mix) 30 mm thick consolidated thickness with 5.5% binder content of bitumen (grade VG-30) by weight of total mix laid with mechanical paver rolled and compacted to required camber and gradient with 8 to 12 ton power roller complete all as specified and as directed.

S & F in repairs precast kerb stone, using PCC Type B0,1:2:4 (12.5mm graded aggregate) factory made size 450 x 300 x 150 mm thick set in CM (1:3) complete including necessary excavation, tamping ground and removal of surplus soil to a distance not exceeding 50m complete all as specified

M&L for preparing of black top surfaces of road and applying thermoplastic paint 2.5mm thick for making lines, dashes, arrows, letters etc exceeding 10cm wide on bituminous surfaces, with retro reflective thermoplastic road marking paint with reflector sign glass beads @ 250 gms per Sqm area confirming to MOST & BIS specification, not less than 2.5mm thick of white/golden/ yellow as approved colour/ shade and applied with mechine, as manufacturer's instructions including preparation of surface i.e. cleaning of surface by removing all dust, dirt oil grease etc complete all as spcified and directed by Engineer incharge

S&F in repairs plastic Glass Beads Reflectors Cat Eyes made of body materials ABS plastic size 117mmx117mmx23mm reflector 19 or 20 BI glass elements on each side with compressive strength upto 35 tonnes yellow / red colour body with reflector fixing by epoxy complete all as specified and as directed.

PAVEWAY CONSTRUCTIONS PRIVATE LIMITED