Tender ID

J&K

Technical Eval

Works

Miscellaneous Works

Fabrication and Fitting of MS Fabricated Bracket Assembly (Front mounting plate) for Unimog 423 of Mechanical and Hospital sub Division 1st Anantnag.

Public Works Department

Mechanical and Hospital Sub Division 1st Anantnag | Anantnag, Jammu And Kashmir

Amount: ₹90,000Closes: 30 Oct 2026Closed

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.

Timeline

Published23 Oct 2026
Closed30 Oct 2026
Technical Evaluation4 Nov 2026
Award—

Bids

2 Bids4 Nov 2026

#	Company	Status
1	M/S ECO FABRICATORS AND BUILDERS Accepted-Technical 0 KHUNMOH INDUSTRIAL AREA 3RD PHASE SRINAGAR JAMMU KASHMIR 190001 \| SRINAGAR \| JAMMU AND KASHMIR \| 190001	Accepted-Technical Accepted
2	M/S MARTAND TREADERS Rejected-Technical	Rejected-Technical Rejected

Tender Value

₹90,000

EMD Value

₹1,800

Closing Date

30 Oct 2026, 2:00 pmClosed

Tender Inviting Organisation

Name

Executive Engineer

Address

Office of the Executive Engineer MHD Anantnag

Work Description

Fabrication and Fitting of MS Fabricated Bracket Assembly (Front mounting plate) for Unimog 423 of Mechanical and Hospital sub Division 1st Anantnag.

Tender Information

Tender ID

2026_PWDJK_329172_1

Reference Number

MHDA/TS/2026-27/76

Tender Type

Open Tender

Product Category

Miscellaneous Works

Form of Contract

Percentage

Period of Work

7 days

Location

Mechanical and Hospital Sub Division 1st Anantnag

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Refer nit

Documents Required

7 documents required · 7 mandatory

Fee/PreQual/Technical

RequiredScanned copy of Tender Document Cost as per NIT (.pdf)

RequiredScanned copy of Earnest Money Deposit as per NIT (.pdf)

RequiredScanned copy of GST registration, latest form GSTR-3B and PAN Card as per NIT (.pdf)

RequiredScanned copy of Accepted/Confirmed of Annexures of NIT (.pdf)

RequiredScanned copy of contractors registration card on JKPWDOMS as per NIT (.pdf)

RequiredScanned copy of Eligibility/Work Experience of bidder as per NIT (.pdf)

Finance

RequiredBOQ (.xls)

Fee & Financial Details

Tender Fee Amount

₹200

Tender Fee Payable To

Accounts Officer M and H Deptt. Kashmir engineers

EMD Fee Amount

₹1,800

Important Dates

Last Activity

4 Nov 2026

Published

23 Oct 2026

Bid Opening

31 Oct 2026

Download Starts

23 Oct 2026

Download Ends

30 Oct 2026

Submission Starts

23 Oct 2026

Bill of Quantities

PercentageBoQ_Ver4.0INR

This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.

BoQ1 (1 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1	Fabrication & Fitting of MS Fabricated Bracket Assembly (Front mounting Plate) to be manufactured out of 12mm IS 2062 E250 structural mild steel plates having CNC profile cut with 10mm internal vertical stiffeners & bracing ribs as shown in the drawing (Enclosed). A heavy 20mm thick end mounting base plate is required to be attached with (40x40 mm) 02 no. square holes on each ends. The job includes designing of structural joints with continuous 8mm fillet welds using low hydrogen electrodes, keeping in view to prevent distortion and overall alignment. The job also includes machining/finishing structural welding so as to have precise alignment across 04 no. clevis pin holes of dia 30mm. The attachment plate fabricated so needs to be cleaned for edge-deburring before applying two coats anti rust primer & Paint. Lastly, the attachment plate fabricated needs to be inspected for specific dimensions, surface finishing & snow plough load accuracy under load.	2	job	45,000	₹90,000

Stage Documents

Stage Summary Snapshot

stage.html

html • 0.02 MB

Technical Bid Opening

tech_bid_open.pdf

PDF

Technical Evaluation

tech_eval.pdf

PDF

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 0.76 MB

Work Item Documents

BOQ_1115338.xls

BOQ • 0.26 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Company

M/S ECO FABRICATORS AND BUILDERS

Accepted-Technical

0 KHUNMOH INDUSTRIAL AREA 3RD PHASE SRINAGAR JAMMU KASHMIR 190001 | SRINAGAR | JAMMU AND KASHMIR | 190001

M/S MARTAND TREADERS

Rejected-Technical

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

Fabrication & Fitting of MS Fabricated Bracket Assembly (Front mounting Plate) to be manufactured out of 12mm IS 2062 E250 structural mild steel plates having CNC profile cut with 10mm internal vertical stiffeners & bracing ribs as shown in the drawing (Enclosed). A heavy 20mm thick end mounting base plate is required to be attached with (40x40 mm) 02 no. square holes on each ends. The job includes designing of structural joints with continuous 8mm fillet welds using low hydrogen electrodes, keeping in view to prevent distortion and overall alignment. The job also includes machining/finishing structural welding so as to have precise alignment across 04 no. clevis pin holes of dia 30mm. The attachment plate fabricated so needs to be cleaned for edge-deburring before applying two coats anti rust primer & Paint. Lastly, the attachment plate fabricated needs to be inspected for specific dimensions, surface finishing & snow plough load accuracy under load.

job

45,000

₹90,000