Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹36.5 LAccepted-AOC 65 RANJEET NAGAR NEAR SAI HOSPITAL AMBALA CANTT 133001 | AMBALA CANTT | AMBALA | HARYANA | 133001 | L1 | Accepted-AOC Lowest and reasonable bidder | |
| 2 | L2₹40.2 L+₹3.7 L (10.3%)Rejected-AOC A 102 GOLDEN SAND APARTMENTS GAZIPUR DHAKOLI ZIRAKPUR PB 160104 | ZIRAKPUR | S A S NAGAR | PUNJAB | 160104 | L2 | Rejected-AOC Not lowest |
Tender Value
₹50 L
EMD Value
₹1 L
Closing Date
9 Jan 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE AF AMBALA
HQ CWE AF Ambala Ambala cantt
REPAIRS OF CERTAIN ROADS AT SITE-II, SITE-III and SITE-IV AND AF STN PATIALA UNDER GE (AF) AMBALA
2022_MES_566930_1
CWE/AF AMB/AMB-33/2022-23
Open Tender
Civil Works - Roads
Item Rate
180 days
Ambala cantt
For MES enlisted contractor Class D Category a v and for un-enlisted contractor refer NIT
7 documents required · 7 mandatory
₹500
Yes
GE AF AMBALA
₹1 L
Yes
30 Jan 2023
2 Dec 2022
11 Jan 2023
2 Dec 2022
9 Jan 2023
26 Dec 2022
2 Dec 2022 - 12 Dec 2022
Amount
Scarifying or picking gravelled macadam or bituminous macadam surfaces in area not exceeding 400sqm and depth exceeding 50mm but not exceeding 100mm and removal of unserviceable debries outside from the MoD land complete all as specified & directed. Note: GE will inform Accepting officer for convening a Board of Officers at least seven days prior to execution of this item.
M&L 75mm thick (compacted thickness) Wet mix macadam (WMM) in one layers with coarse stone aggregate (lime stone, sand stone, flint or quartzite) of grading 2 (63mm to 40mm size ) or of grading 3 (50 mm to 20mm) specification as per clause 406 and as per table 400-13 of yellow book of MORT&H including premixing the material with water at OMC in mechanical mix plant, carriage of mixed material by tipper to site for all leads & lifts, to be laid using mechanical paver, spread watered, rolled & consolidated to required gradient and camber with vibratory type power roller 8 tonne to 12 tonne capacity to achieve the desired density complete all as specified & directed. Note: Mix will be prepared in mixing plant of suitable capacity.
Description all as per BOQ item No 2.00 here-in-above but except coarse aggregate. Note: Serviceable coarse aggregate/material obtained from BOQ item No 1.00 here-in-before shall be used duly washed / cleaned as directed by Engineer-in-charge.
M&L preparation of Wet Mix Macadam (WMM) surfaces by brushing with wire brushes for removing caked mud/grass etc sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dust/dirt etc and applying evenly a priming/tack coat of bituminous primer (paving bitumen grade VG-10) @ 10 Kg per 10 Sqm by using mechanical sprayer complete all as specified & directed.
M&L preparing of existing black top surfaces of road by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surfaces with gunny bags/air compressor to remove all dust/dirt and applying evenly a priming/tack coat of bituminous primer (paving bitumen grade VG-10) @ 5Kg per 10 Sqm by using mechanical sprayer complete all as specified & directed
M&L laying premix bituminous macadam using 20mm size graded crushed stone aggregate (grading 2 with nominal aggregate size 19mm), mixed with binder content (paving bitumen grade VG-30) @ 4% by weight of total mix, rolled and compacted with 8 tonne to 12 tonne power road roller to required gradient and camber using full width mechanical sensor paver with string sensor (consolidated thickness not exceeding 75 mm) in single layer complete all as specified & directed. Note: For price adjustment of bitumen & other requirements, refer Sch 'A' Notes/Particular specifications.
M&L 30mm thick (consolidated thickness) bituminous pre-mixed, hot mix, semi-dense asphaltic concrete with coarse aggregate of grading 1 as per MORT&H specification in single layer using binder content (paving bitumen grade VG-30) @ 5.5% by weight of the total mix as per design mix including supply and mixing of filler (OPC cement) laid, rolled and compacted to required gradient and camber using full width mechanical sensor paver with string sensor and compacted with 8 tonne to 12 tonne power roller complete all as specified & directed. Notes: (i) For price adjustment of bitumen & other requirements, refer Sch 'A' Notes/Particular specifications. (ii) GE will inform Accepting officer for convening a Board of Officers at least seven days prior to execution of this item.
M&L repair to potholes of depth exceeding 30cm, area not exceeding one sqm each including sweeping free from dust and mud or water, scoring sunken surfaces in roads, paths etc by using pressured air, cutting around edges to at least 25 mm in depth, making good by filling in screened & graded road metal, watering and well ramming (including supply of road metal) and by applying a priming/tack coat of bituminous primer (paving bitumen grade VG-10) @ 5kg per 10sqm by using mechanical sprayer putting in premixed bituminous macadam, well rammed and sealed with binder (paving bitumen grade VG-10) @ 9.8kg per 10sqm, blinded with 0.09 cum of stone chippings, 6.3mm size and again well rammed (including supply of premixed macadam, binder and chippings) complete all as specified & directed.
M&L painting lines, dashes, arrows etc. of width exceeding 100mm on roads/pavements by hot applied thermoplastic road marking paint(white/yellow) inclusive type I reflectorising glass beads as per table 800-3, 800-4 of MORT&H, applied in uniform thickness of atleast 2.5mm and spread uniformly with reflectorising glass beads type II @ 250 gram per sqm & painting materials @ 650 gram per sqm with a road marking machine as per IRC: 35, with traffic diversion arrangements if required, complete as per MORT&H specification clause 803.4, complete all as specified & directed.
S&F in repair ABS Engineering plastic speed breaker designed so dynamically and compact that it can bear maximum load of it. The body of the speed breaker is made of ABS material. Two highly reflective reflectors moulded in PMMA material welded with ABS plate through ultrasonic welding process and then fixed on to the speed breaker so that dust and water cannot touch reflectors inside and thus it maintains its reflectivity for a long period, approx size 750mm x 250mm x75mm of each piece, laid & fixed on road along the length of ABS Engineering plastic speed breaker adjacent to each other complete all as specified & directed. Make:- Model No DA-1006, design patent No 206431 of Dark Eye or equivalent of 3M or Shakti or Sheetal
M&L continuous brick edging using brick sub class “B”, old size with width equal to width of bricks laid dry on end vertically including necessary earth work embedding bricks at required depth and tamping ground around brick and removal of surplus soil to a distance not exceeding 100mtr complete all as specified and directed. Note:Brick of class designation 100 i.e. bricks shall be of minimum compressive strength 100Kg/sqcm
S&F in repair solar road stud of aluminum alloy shell (100% water proofing design according to IP 67), size 125mm x 125mm x 25mm (shank 65mm), high efficiency monocrystal solar panel 2.4volt/0.3watt, one Nickel cadmium rechargeable battery (1.2volt/1600mAh) consisting of super bright LED with 10,000 to 18,000 mili-candela, night view distance upto 1000mtr, designed to bear minimum load approx 10 tonnes fixed as per manufacturer's instructions complete all as specified & directed. Make: Dark Eye, 3M, Tata BP Solar
S&F in repair metal tubular delinetor made out of ABS round body fitted with 2 Nos. 65mm dia highly reflective reflectors made out of PMMA and mounted on 45mm/50mm dia mild steel pipe of 600mm height duly powder coated and thermoplastic elastomer 3 bands of green, red and yellow reflector radium tape of 25mm wide strips with anti theft steel net for reflector protection, workable for 2-3 days (nights) after full charge for 8-10 hours including embedding in PCC 1:2:4, type B1 minimum size 150mm x 150mm x 300mm and necessary excavation complete all as specified & directed Make: Dark Eye, 3M, Tata BP Solar
For Credit Schedule, refer tender documents. The amount of credit schedule shall be deducted from total quoted amount of BOQ to arrive contract sum.
AP BUILDERS
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .