REPAIR AND MAINT OF CEILING FAN, EXHAUST FAN AND COMPREHENSIVE MAINT FOR REPLACEMENT OF CONVENTIONAL LIGHTS WITH LED LIGHT FITTINGS IN POCKET Nos. 1, 3 TO 17 AND 19 TO 22 AT MIL STN JAISALMER UNDER GE (A) JAISALMER.

Amount

S&F fan condenser 2.5 Mfd, 240 volts for ceiling/exhaust fan including PVC clamp and taking down fan condenser complete all as specified and directed by engineer-in-charge. Make : Epcos, Bajaj, Havells, Crompton as approved by GE.

S&F fan condenser 3.15 Mfd, 240 volts for exhaust fan including PVC clamp and taking down fan condenser complete all as specified and directed by engineer-in-charge. Make: Epcos, Bajaj, Havells, Crompton as approved by GE.

S&F fan condenser 4 Mfd 240 volts for exhaust fan including PVC clamp and taking down fan condenser complete all as specified and directed by engineer-in-charge. Make : Epcos, Bajaj, Havells, Crompton as approved by GE.

S&F fan regulator electronic Modular step type, 120 watts, 1 module/2 Module including taking down fan regulator complete all as specified and directed by engineer-in-charge.

S&F steped type electronic fan regulator flush type on the existing sheet 120 watts including taking down fan regulator complete all as specified and directed by engineer-in-charge.

S&F rubber reel insulator 3 Nos nut bolt , washer and lock pin including taking down insulator complete all as specified and directed by engineer-in-charge.

S&F ceiling fan blade 1200 mm sweep including taking down ceiling fan blade complete all as specified and directed by engineer-in-charge.

S&F exhaust fan blade up to 380 mm size including taking down exhaust fan blade complete all as specified and directed by engineer-in-charge.

S&F ceiling fan hook for fixing fan including taking down ceiling fan hook complete all as specified and directed by engineer-in-charge.

S&F ceiling fan downrod suitable size upto 03 fit with GI Hook as per requirement of site of any size including taking down ceiling fan downrod complete all as specified and directed by engineer-in-charge.

S&F ball bearing suitable for ceiling fan 1200/1400mm sweep including taking down ball bearing complete all as specified and directed by engineer-in-charge. Make : SKF/NBC/TATA as approved by GE.

S&F ball bearing suitable for exhaust fans up to 450mm size including taking down ball bearing complete all as specified and directed by engineer-in-charge. Make : SKF/NBC/TATA as approved by GE.

S&F brass GM bush suitable for fan any size including taking down bush complete all as specified and directed by engineer-in-charge.

Taking down ceiling fan / Exhaust fan / Wall fan / Air circulator fan of any sweep sealing cable ends dismanting blade and removing fan and blade to store complete all as specified and directed by engineer-in-charge.

M&L for rewinding of fan of any size with supper enameled copper wire of existing gauge including varnishing and drying complete reassembling & testing complete of following size complete all as specified and directed by engineer-in-charge :- Note :- (i) The super enamelled winding wire shall be any one make of Devidayal / Chetak / National of appropriate gauge as approved by GE. (ii) Any unserviceable parts required for replacement shall be measured and paid separately under respective item of 'BOQ'.

Ceiling fan 1200 mm Sweep

Ceiling fan 1400 mm Sweep

Exhaust Fan 250/300/380 mm

Exhaust Fan 400/450 mm

Wall mounted fan 450 mm Sweep

Air circulator 600 mm sweep

Fixing only Ceiling fan/ exhaust fan/Wall Mounting/Air circulator and connecting up including provn of cable from ceiling rose or connector to fan complete all as specified and directed by engineer-in-charge

M&L for Painting of ceiling fan/exhaust fan complete in situ as per existing colour with synthetic enamel paint by spraying including filling cavity with filler one coat after cleaning all dust etc complete all as specified and directed by engineer-in-charge

S&F including taking down for replacement of 3 core PVC insulated and sheathed cable with copper conductor of size 40/0.076 complete all as specified and directed by engineer-in-charge

S&F exhaust fan PVC body suitable for PVC Exhaust fan of 250 mm sweep as per existing make including taking down of u/s exhaust fan and deposited to MES store yard complete all as specified and directed by engineer-in-charge

S&F ceiling fans complete with blades, down rods, electronic regulator and accessories 230 V 1200 mm sweep including taking down of u/s ceiling fan and deposited to MES store yardcomplete all as specified and directed by engineer-in-charge

S&F of top and bottom PVC canopies with colour matching with the existing ceiling fan complete all as specified and directed by engineer-in-charge

Cutting of wall with mason for making window suitable for fixing of 300 mm exhaust fan and making good as per existing surface of wall complete all as specified and directed by engineer-in-charge

Supply, fixing, testing and Commissioning of ALL in ONE Solar LED Street Light Fixture of 40 Watt in Single Piece Extruded Aluminium Housing IP-65 IK 08, encases with Solar PV Panel of Capacity 30Wp Mono Crystalline at PSH 4hrs, Battery type and Size - 12.8V-18Ah (LiFePO4), Luminance Efficacy > 150 lumens/Watt , CRI > 70, Dimming Facility With PIR Sensor Which works as Follows complete all as specified and directed by engineer-in-charge:- 1st one Hrs on motion 100% and without 25% brightness next four Hrs on motion 40% and without 25% brightness next six Hrs 25% irrespective of motion final one Hrs on motion 40% & without 25% (Till Dawn Condition). CCT - 5700 to 6500 K. The Charge controller cum driver Must be MPPT Charge Controller with silicon potted ( Potted Type ) with Efficiency (of the electronics) > 90%, Duty Cycle - Dusk to Dawn (12hours) and other safety features like - External switch (IP-66) to On/Off , Protections for reverse flow of current through the PV Module, Battery Overcharge & deep discharge cut off The Manufacturer of the Fixture must have it's own in house NABL Accredited Lab and Must produce it's certificate with at least 1 year validity of that ertificate and also Lm-79, Lm-80 , Test Certificate Etc.

All as per Item No.23.00 here-in-before above but 15 watt

M&L for rewinding of fan of any size with supper enameled copper wire of existing gauge including varnishing and drying complete reassembling & testing complete of BLDC fan 1200mm (make : Crompton Energion) including taking down and refixing of the same complete all as specified and directed by engineer-in-charge NOTE:- Make match with existing provisions as approved by GE.

S&F PCB card for BLDC fan 1200 mm sweep (Make : Crompton Energion) including taking down and refixing the ceiling fan complete all as specified and directed by engineer-in-charge. NOTE:- Make match with existing provisions as approved by GE.

S&F bearings for BLDC fan 1200 mm sweep (Make : Crompton Energion) including taking down and refixing the ceiling fan ccomplete all as specified and directed by engineer-in-charge. NOTE:- Make match with existing provisions as approved by GE.

S&F remote for BLDC fan 1200 mm sweep (Make : Crompton Energion) including synchronising with the existing ceiling fan complete all as specified and directed by engineer-in-charge. NOTE:- Make match with existing provisions as approved by GE.

M&L for binding of ceiling fan with 1.6 mm dia (16 gauge ) GI binding wire in existing hook with suffiecient no of runs to bear the weight and vibration during run effieciently complete all as specified and directed by engineer-in-charge. NOTE:- Make match with existing provisions as approved by GE.

Taking down of old unsv tubelight fitting /bulkhead/ garden light/ gate light of any description light fitting any type any watt complete all as specified and directed by engineer-in-charge.

Taking down of old unsv street light /flood light/high bay light of any description light fitting any type any watt complete all as specified and directed by engineer-in-charge.

S&F LED box type Integrated Batten Wattage 20 watt having Aluminum Extruded housing in white powder coated Finish with high translucent PC Cover, Dimension of the Fixture Must not be less Then Length 1170 MM (± 5 MM ), Elegant Design, IP 20 Protection. Minimum Lumens output of the fitting shall be 2500 Lumens With Efficacy of 125 lm/W, CCT 5700 – 6500K, Surge Protector 4 KV, PF>= 0.95 , Necessary mounting arrangements. The Manufacturer of the fixture shall have in house NABL Accredited Lab and must produce certificate of the same along with LM-79 / LM-80 test report complete all as specified and directed by engineer-in-charge.

S&F LED box type Integrated Batten Wattage 24 watt having Aluminum Extruded housing in white powder coated Finish with high translucent PC Cover, Dimension of the Fixture Must not be less Then Length 1170 MM (± 5 MM ), Elegant Design, IP 20 Protection. Minimum Lumens output of the fitting shall be 2500 Lumens With Efficacy of 125 lm/W, CCT 5700 – 6500K, Surge Protector 4 KV, PF>= 0.95 , Necessary mounting arrangements. The Manufacturer of the fixture shall have in house NABL Accredited Lab and must produce certificate of the same along with LM-79 / LM-80 test report complete all as specified and directed by engineer-in-charge.

S&F LED box type Integrated Batten 40 watt having Aluminum Extruded housing in white powder coated Finish with high translucent PC Cover, Elegant Design, IP 20 Protection. Dimensions of the Fitting Shall be Not less then 1200 MM ( Length) X 40 MM ( Width ) X 63 MM ( Height ). Lumens output of the fitting shall be not less then 4400 lm, CCT 5700 – 6500K, buring hours 50,000 Surge Protector 4 KV, PF>= 0.95 , Separate detachable type Electronic constant current drivers for easy replacement and maintenance, THD < 10% , Necessary mounting arrangements .The fixture shall be suitable for wall mounting /suspension mounting as per site requirement . The Manufacturer of the fixture shall have in house NABL Accredited Lab and must produce certificate of the same along with LM-79 / LM80 / Test Report complete all as specified and directed by engineer-in-charge.

S&F LED tube light fitting 10 Watt, 2 Feet or 591 MM in length, IP 20 Protection, wall mounted type, Slim LED Batten with extruded aluminium housing and polycarbonate diffuser, elegant design with end caps, having excellent thermally managed polycarbonate extrution, LM 80 Certified LED having Integral Electronic Constant Current Driver, IP 20 Protection, Opreating voltage 240 V , 50Hz AC Supply and Operating tempraeture 0 to 50 C, Power factor ≥ 0.9, Lumen output ≥ 1000, necessary mounting arrangements on PVC Square box 2 Nos, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting with white color flexible pipe complete all as specified and directed by engineer-in-charge.

S&F recessed/ceiling/surface/POP mounted down lighter with CRCA housing with high bright LED,idealy suited for low ceiling areas 36watt (100 Lumen/watt or higher) LED, size 2ft x 2ft The product features color tuning from 3000 K to 6500 K, necessary mounting arrangements , provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting with white color flexible pipe complete all as specified and directed by engineer-in-charge.

S&F recessed/ceiling/surface/POP mounted down lighter with CRCA housing with high bright LED,idealy suited for low ceiling areas 50watt LED (100 Lumen/watt or higher) , size 2ft x 2ft The product features color tuning from 3000 K to 6500 K, necessary mounting arrangements , provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting with white color flexible pipe complete all as specified and directed by engineer-in-charge.

S&F for LED downlight recessed/ceiling/surface/POP mounted luminare round type 06 watts with inbult driver and aluminium pressure die -cast housing with heat dissipating fins for larger surface area finished in epoxy powder coated white to driver high efficiancy light output and uniformity ,utilising edge lit technology and white finish operating voltage 230V AC, 50 Hz complete all as specified and directed by engineer-in-charge.

S&F for LED downlight recessed/ceiling/surface/POP mounted luminare round type 15 watts with inbult driver and aluminium pressure die -cast housing with heat dissipating fins for larger surface area finished in epoxy powder coated white to driver high efficiancy light output and uniformity ,utilising edge lit technology and white finish operating voltage 230V AC, 50 Hz complete all as specified and directed by engineer-in-charge.

S&F for LED downlight recessed/ceiling/surface/POP mounted luminare round type 18 watts with inbult driver and aluminium pressure die -cast housing with heat dissipating fins for larger surface area finished in epoxy powder coated white to driver high efficiancy light output and uniformity ,utilising edge lit technology and white finish operating voltage 230V AC, 50 Hz complete all as specified and directed by engineer-in-charge.

S&F for LED downlight recessed/ceiling/surface/POP mounted luminare round type 30 watts with inbult driver and aluminium pressure die -cast housing with heat dissipating fins for larger surface area finished in epoxy powder coated white to driver high efficiancy light output and uniformity ,utilising edge lit technology and white finish operating voltage 230V AC, 50 Hz complete all as specified and directed by engineer-in-charge.

S&F in repair LED surface/POP/Recess grid fittng (1 X 4 feet),of illumination100 lumen/watt,unifomly distributed light , including wedge rackets and other necessary equipment to fit as per site requirement complete all as specified and directed by engineer-in-charge.

S&F building security light fittings Wall mounted LED light 35 Watt including bracket made out of GI pipe (medium grade) 40mm, 1.20 metre long made to shape and fixed outside of the building by means of 2 No FI 40x6 mm clamps with suitable size of nuts, bolts, washers and connecting with three core copper flexible cable of size 1.50 Sq mm complete all as specified and directed by engineer-in-charge.

S&F Integral decorative LED bollard with polycarbonate diffuser square shaped with IP 65 protection suitable for 10 watts,0.6 M height , LED with necessary MS base box made out of MS sheet of 2 mm thick of suitable size abbended in PCC 1:2:4 base, elecrical connections with adequate size one complete all as specified and directed by engineer-in-charge.

S&F for LED post top lantern/gate Light 40 watt light fitting made of die cast top housing must also be dia cast aluminium spigot housing with decarative acrylic diffuser with IP 65 protection complete with all accessories in colour white/warm white complete all as specified and directed by engineer-in-charge.

S&F LED flood light 70 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp with fixing arrangement such as bracket, MS clamp, Nut bolts etc and connecting complete all as specified and directed by engineer-in-charge. Note:- Fixing of light at any height arrangement of ladder should be provided by contractor.

S&F LED flood light 100 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp with fixing arrangement such as bracket, MS clamp, Nut bolts etc and connecting complete all as specified and directed by engineer-in-charge. Note:- Fixing of light at any height arrangement of ladder should be provided by contractor.

S&F energy saving, environment friendly & robust Highbay/Mediumbay roof truss light LED for covered shed 150 W IP66 luminaire with high efficacy with fixing arrangement such as bracket, MS clamp, Nut bolts etc and connecting complete all as specified and directed by engineer-in-charge. Note :- Fixing of light at any height arrangement of ladder should be provided by contractor.

S&F energy saving, environment friendly & robust integrated well glass luminarie with die cast canopy&gear housing for covered shed 70 W IP66 luminaire with high efficacy with fixing arrangement such as bracket, MS clamp, Nut bolts etc and connecting complete all as specified and directed by engineer-in-charge. Note:- Fixing of light at any height arrangement of ladder should be provided by contractor.

S&F LED light fitting 150 Watt flame proof, CIMFR-BIS-PESO certified recommended for gas/ vapor group of IIC, Zone 1 & 2 and IP 65 protection with die cast aluminum housing with heat resistant toughened glass, with driver connector etc. complete with all accessories prewired and including connecting up with three core flexible copper conductor cable in flexible metalic conduit with suitable size complete all as specified and directed by engineer-in-charge.

S&F LED light fitting 16/20 Watt flame proof, CIMFR certified recommended for gas/ vapor group of IIA & IIB, Zone 1 & 2 and IP 65 protection with die cast aluminum housing with heat resistant toughened glass, with LED tube light fixtures driver, holders, connector etc. complete with all accessories prewired and including connecting up with three core flexible copper conductor cable in flexible metalic conduit with suitable size complete all as specified and directed by engineer-in-charge.

S&F in repair of LED spot light 12 watt specially designed for commercial usage long life with 30000 burning hours with CRI>80, range 3000K-4000K,beam angle 36 degree,vertical tilt 30 degree complete all as specified and directed by engineer-in-charge.

S&F in replacement of Decorative wall mounted luminaire made out of polycarbonate with unbreakable globe suitable for LED bulb and including of LED bulb 15 watts complete all as specified and directed by engineer-in-charge.

S&F in replacement of 05 mtr LED flexible strip use high brightness SMD LED as light source and high quality temp. resistant FPCB, Voltage DC 12 V color R/Y/B/G/P/W/WW including suitable electronic driver complete all as specified and directed by engineer-in-charge.

SHREE BHAGWATI ENTERPRISES (BID ID -3425507)

MSR INFRATECH (BID ID -3424884)

UNIVERSAL INFRAPROJECT PVT LTD (BID ID -3424023)

M/s ESS KAY Construction (BID ID -3425224)

DIVYA ASSOCIATES (BID ID -3425055)

Sree Ram Enterprises (BID ID -3425216)

M/S Anil Enterprises (BID ID -3424851)

MAHESH KUMAR SINGLA CONTRACTOR (BID ID -3425654)