REPAIR DAY TO DAY MAINTENANCE OF COMPLAINTS AND MISC B/R WORK IN MD ACCN UNDER AGE B/R-I UNDER GE BABINA

Amount

Demolition of Brickwork or stone/ boulder masonry, laid dry, stacking the serviceable stone for re-use and disposal of debris and rubbish to low level area complete all as directed by the Engr-in-Charge.

M&L for brick work with sub class ‘B’ bricks old size straight or curved on plan exc 6 M radius built in cement mortar (1 : 6) etc complete all as specified and as directed.

M&L for brick work with sub class ‘B’ bricks old size straight or curved on plan exc 6 M radius built in cement mortar (1 : 6) e but except Bricks etc complete all as specified and as directed

M&L for brick work with sub class ‘B’ bricks old size straight or curved on plan to any radius in half brick thick wall built in cement mortar (1 : 4) etccomplete all as specified and as directed.

M&L for brickwork with sub class ‘B’ bricks in half brick thick honey comb walling, built in CM 1:4 complete all as specified and directed.

Dismantling any bore, cast iron or reinforced concrete or PVC pipes for rain water ,drain pipes, jointed in cement mortar and taking out of trenches if required complete all as specified and as directed..

S & F 110 mm dia, PVC rain water pipes, single socketed, in any length with sealant rubber ring joints fixed in trenches/wall all as specified and as directed by the Engineer - in - Charge.

Fixing only 110 mm bore PVC pipes in any length with rubber ring joints fixed to walls/trenches with necessary MS flat Iron clamps of size (40 x 4mm) (Pipes shall be obtained from taking down) complete all as specified and as directed..

S & F 75 mm dia, PVC rain water pipes, single socketed, in any length with sealant rubber ring joints fixed to walls/trenches including necessary MS flat Iron clamps of size (40 x 4mm) all as specified and as directed by the Engineer - in - Charge.

Fixing only 75 mm bore PVC pipes in any length with rubber ringjoints fixed to walls/trenches fixed to walls with necessary MS flat Iron clamps of size (40 x 4mm) complete all as specified and as directed.

S&F PVC bends any radius 110mm bore complete all as specified and as directed.

S&F PVC (SWR) junction single, (single T) equal or unequal 75mm bore with access door omplete all as specified and as directed.

S&F PVC (SWR) junction single, (single T) equal or unequal 110mm bore with access door omplete all as specified and as directed.

S&F PVC (SWR) bends any radius 75mm bore complete all as specified and directed omplete all as specified and as directed.

Taking down cement plaster on brick or stone walls etc incl racking out joints hacking for key and scrabbing down with water etc complete all as specified and directed.

M& L 15mm thick rendering in CM 1:6 on fair faces of brick work or concrete surfaces finished smooth and even without using extra cement complete all as specified and directed.

M&L for rendering 10mm thick on fair faces of wall or conc surfaces in CM 1:4 finished even and smooth without using extra cement complete all as specified and directed.

M & L for preparing newly plastered surfaces of walls and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and directed.

M & L for preparing newly plastered surfaces of walls and applying three coats of white wash.on wall complete all as specified and directed.

M & L for preparing newly plastered surfaces of walls and applying two coats of distemper oil emulsion over priming complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises and complete all as specified and as directed.

M&L, for PCC 1:2:4 type B-0 using 12.5 mm gradesd stone agg as in levelling course of floors of 25 mm thick complete all as specified and directed.

M&L, screed bed or bedding layer of mortar 15mm thick in cement mortar 1: 6 to receive tiles etc finished rough complete all as specified and directed.

M&L for Vitrified ceramic tiles 8 to 10mm thick (square/rectangular) polished area of each tile not exceeding 0.36 sqm, in floors etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match to floor etc complete all as specified and directed.

M&L for non skid coloured joint free ceramic tiles 7 to 8 mm thick (square / rectengular) area of each tile exceeding 0.11sqm but not exc 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match to floor etc complete all as specified and as directed.

M&L for non skid coloured joint free ceramic tiles 7 to 8 mm thick (square / rectengular) area of each tile exceeding 0.18sqm but not exc 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match to floor etc complete all as specified and as directed.

M&L,Rendering 10mm thick in cement mortar 1: 3 on faces of brick work or concrete surfaces, finished rough to receive tiles etc complete all as specified and directed.

M&L for vitrified ceramic tiles 8 to10 mm thick (square / rectangular) polished area of each tile exceeding 0.18 sqm but not exc 0.36 sqm, in Vertical surfaces such as skirting, dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match to floor etc etccomplete all as specified and as directed.

M&L for non skid coloured joint free ceramic tiles 7 to 8 mm thick (square / rectengular) area of each tile exceeding 0.11sqm but not exc 0.18 sqm, in vertical surface as skirting, dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match to floor etc complete all as specified and as directed.

M&L for non skid coloured joint free ceramic tiles 7 to 8 mm thick (square / rectengular) area of each tile exceeding 0.18sqm but not exc 0.36 sqm, in vertical surface as skirting, dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match to floor etc complete all as specified and as directed.

M&L for joint free glazed coloured tiles 350x250x7mm/450x350x7mm thick for work on vertical surface, set & jointed in cement slurry and pointed in white or coloured cement to match etc complete all as specified and as directed

M&L for 15-20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15 mm thick in CM(1:6) etc complete all as specified and directed.

Demolition of PCC in any description and in any position etc complete all as specified and directed

M & L Machine cut kota stone slab flooring 18-20mm thick over and including 20mm thick cement screed bed in CM 1:6 laid laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing omplete all as specified and as directed.

M & L Machine cut kota stone slab flooring 18-20mm thick in riser of steps,skirting, dado & pillar over and including 10mm thick rendering in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing omplete all as specified and as directed.

M&L for 75mm thick cement concrete type C-1, 1:3:6 (20mm graded aggregate) as in plinth protection finished even and smooth without using extra cement complete all as specified and directed.

M/L for 40mm thick cement concrete type B-1 1:2:4 (using 20mm graded crushed stone aggregate) complete all as specified and as directed. Finished even & smooth w/o using extra cement omplete all as specified and as directed.

M&L chequered tiles (Cement) 30cm X 30cm x 25mm set and jointed and pointed in neat cement slurry in floor with grey cement and pigment over & including 20mm thick screed bed in CM (1:6) Complete all as specified and directed.

M&L 60 mm thick machine pressed precast concrete interlocking paver block any shape & size confirming to IS 15658-2006 of 60mm thickness, M-35 grade with grey cement & pigment complete all as specified and directed.

M&L PCC 1:4:8 type D2 using 40mm graded stone agg as in filling and mass concrete, Sub base/flooring complete all as specified and directed.

M&L, 50mm thick sand cushioning to under concrete interlocking paver block including watering & consolidation complete all as specified

M&L, for PCC 1:2:4 type B-0 using 12.5mm graded stone agg as in coping on side of path including necessary form work etc complete all as specified and directed.

Taking down chowkhat or frames with shutters (without taking off shutters from the frame) not exe 1.5 Sqm each complete all as specified and directed.

Taking down chowkhat or frames with shutters (without taking off shutters from the frame) but exc 1.5 and n.exc 4 Sqm each complete all as specified and directed.

Taking down shutters of any description n.exc 1 Sqm each complete all as specified and directed.

Taking down shutters of any description exc 1 sqm and n.exc 2 Sqm each complete all as specified and directed.

S&F, locally fabricated plain framed paneled shutter 35 mm thick IInd class HW (any number & Panels) with lock rail and panel of 9 mm B.W.P commercial ply or 12mm veneered particle board with commercial veneering on both face, the size of rail and style as per IS : 1003 (Part I) kiln seasoned and chemically pressure treated etc complete all as specified and as directed

S&F, 35mm thick, flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed by the Engineer-in-Charge

S&F, locally fabricated 35 mm thick IInd class HW glazed & skeleton shutters open rebated and prepared to receive glass gauge etc. (without sash bars) edges of framing plain chamfered or rounded fitted with cut & mitered beads for security glass/gauge etc. size of members of shutter as specified in SSR Pt I sec 8 Cl 8.20 (a), divided into squares with plain chamfered rounded, mitered and rebated sash bars etc complete all as specified and as directed

Ditto as above item but 30 mm thick windows, ventilation etc provided with stiles and rails as specified in SSR Pt-I Sec 8 clause 8.20 (b) etc complete all as specified and directed.

Refixing door shutter after easening or repairing in same opening size exc 1 Sqm and n exc 2 Sqm each complete all as specified and as directed.

S&F solid PVC frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube, S&F in opening as per specification & drawing complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) constiting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and palin colour PVC sheet for top rail lock rail & botom rail on either side and as gap insert for top rail bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/selaed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement S&F in the frame at site including hinges, tower bolt and handle complete all as specified and directed.

S&F butt hinges extruded aluminium alloy with galvanised mild steel hing pin anodised and fixed type C-21, 100 mm size in toilet with PVC doors etc complete all as specified and as directed

S & F Butt hinges 75 mm size, medium weight, stainless steel complete all as specified and as directed

S&F aluminum anodized barrel tower bolts of extruded section & fixed 150 mm long etc complete all as specified and as directed.

S&F aluminum handles cast type anodized 100 mm size etc complete all as specified and as directed.

S&F aluminum handles cast type anodized 125 mm size etc complete all as specified and as directed.

S & F Butt hinges 100 mm size, medium weight, cold rolled mild steel complete all as specified and as directed.

S & F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed.

M&L two coat synthetic enamel paint over one coat of pink primer on new wooden surface of any description not otherwise described over 10 cm width or girth etc complete all as specified and as directed

S&F in repairs 100mm long, Aluminium handles, cast type, anodised complete all as specified and as directed

S&F in repairs 150 mm long, Aluminium handles,cast type, anodised complete all as specified and as directed

S & F in repairs 200 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and as directed

S&F in repair MS Butt hinge 75mm ,Cold Rolled Medium weight complete all as specified and directed.

S&F in repair MS butt hinges, cold rolled medium weight 100mm in size complete all as specified and directed.

S & F in repair Aluminum siliding door bolts, plate type, stove enamelled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts for on bolts plate and two on staple plate and fixed 300mm long etc complete all as specified and as directed

S&F 18mm thick Rajshri Celuka ply of grade 1 quality of both side plain white colour fixed with screws, solvent cement/adhesive to make kitchen cabinet sides top and bottom and shelves inside the cabinets incl taking down old wooden partical boards complete all as per specifications and as directed by the Engr-in-Charge

S&F 12mm thick Rajshri Celuka ply of grade 1 quality of both side plain white colour fixed with screws, solvent cement/adhesive to make wall mounted kitchen cabinet sides back & pull out shelves inside the cabinets incl taking down old wooden partical boards complete all as per specifications and as directed by the Engr-in-Charge

M & L for 18/19mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and as directed by the Engineer-in-Charge

M&L for external teak wood lipping 6mm thick and 19/20 mm wide fixed with nails on edges of particle board incl wooden polishing on beading complete all as specified and as directed by the Engineer-in-Charge

S&F auto closing hinges 35mm of 0 crank (KH-001) OR 8 crank (KH-002) openable at 110 degree for kitchen cabinet shutters complete all as specified and as directed.

S & F continuous (Piano) hinges, mild steel, bright finished or electro galvanized, width of flaps (When open) 30 mm complete all as specified and as directed

S & F 40 mm dia., cup board knobs fixed with nut, screw and washer of brass, polished complete all as specified and as directed

S & F in repair 40 mm dia., cup board knobs fixed with nut, screw and washer of brass, polished complete all as specified and as directed

S & F 75 mm size aluminium anodised Hasp and staple, including bolt to hinge plate and fixed with screws complete all as specified and as directed

S & F in repair 75 mm size aluminium anodised Hasp and staple, including bolt to hinge plate and fixed with screws complete all as specified and as directed.

S & F in repair 5.5 mm thick tinted glass complete fixed to aluminium frame work including rubber beading all as specified and as directed

S&F galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples including fixing arragement in wooden/ steel shutter complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frames including punching or drilling out old glazing pins / spring clips and providing new pins / spring clips complete all as specified and directed.

Supply and fixing 3mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.5 Sqm in each pane complete all as specified and directed..

S & F 3 mm thick Figured glass, pin headed type and glazing with oil putty in squares not exceeding 0.5 Sq. M in each pane complete all as specified and as directed.

S&F in repair galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples including fixing arragement in wooden/ steel shutter complete all as specified and directed.

Supply and Fixing in repair Mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

S&F in repair stainless steel curtain rod grading H-304, 25mm dia as in curtain rod etc complete and as directed.

Supply and Fixing Stainless steel round knob at both end of curtain rod of 25mm dia etc complete and all as specified and directed.

S&F stainless steel bracket suitable for curtain rod of 25 mm dia and fixed in position on walls with wooden cleat/ rawal plug as directed.

S&F in repair stainless steel sink with drainage board 1.00mm thick for kitchen or laboretory with plug, waste pipe, coupling, washers also incl cantilever cast iron brackets connecting union etc, overall size 915x460mm with bowl size 410x330x160mm complete all as specified and as directed.

S&F in repair stainless steel kitchen plate rack overall size 1200mm x 1200mm make out of 1.00 mm thick stainless steel sheet etccomplete all as specified and as directed

Taking down steel tubing and connection incl cleaning for refixing or removal to store 15mm bore complete all as specified and directed.

Taking down steel tubing and connection incl cleaning for refixing or removal to store 20mm bore complete all as specified and directed.

S&F GI tubes md grade galvanised with all fittings & fixed complete to walls & ceiling or laid in trenches/floors 15mm bore including GI Elobow, T/ union, Socket complete all as specified and directed.

S&F GI tubes md grade galvanised with all fittings & fixed complete to walls & ceiling or laid in trenches/floors 20mm bore including GI Elobow, T/ union socket complete all as specified and directed.

Refixing old steel tubing and connection in new or old position incl cleaning complete 15mm bore complete all as specified and directed.

Refixing old steel tubing and connection in new or old position incl cleaning complete 20mm bore complete all as specified and as directed.

Dismantling of existing water storage tank of capacity exc 250 ltrs but n exc 500 ltrs each and setting aside ( or lowering down from roof ) including removing from site etc complete as directed

S&F rotational moulded,multilayer HDPE water storage tank of 500 ltrs capacity(Cylindrical vertical with closed top) ISI marked fixed in position on existing places complete all as specified including 02 Nos 20mm dia full threaded GI tank niple and refixing of inlet, outlet & overflow pipe etc, complete all as specified and as directed.

Fixing only old rotational moulded polyethlene water storage tanks (cylindrical vergical with closed top) hoisted and fixed in position all as specified in SSR Part I 500 ltrs capacity complete all as specified and as directed.

Dismantling of existing water storage tank of capacity exc 500 ltrs but n exc 1000 ltrs each and setting aside ( or lowering down from roof ) including removing from site etc complete as directed

S&F rotational moulded,multilayer HDPE water storage tank of 1000 ltrs capacity(Cylindrical vertical with closed top) ISI marked fixed in position on existing places complete all as specified including 02 Nos 20mm dia full threaded GI tank niple and refixing of inlet, outlet & overflow pipe etc, complete all as specified and as directed.

Fixing only old1000 ltr capacity rotational moulded polythene tanks (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and as directed.

S&F 20mm ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for ironpipe and fixed. (Minimum weight 20mm-210 gms) complete all as specified and as directed

S&F in repair 20mm ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for ironpipe and fixed. (Minimum weight 20mm-210 gms) complete all as specified and as directed

S&F in repair 20mm Gun metal globe or gate valve with iron wheel head screwed both ends for iron pipe and fixed complete all as specified and directed

S & F in repair PVC tank cover suitable for 500 ltr capacity complete all as specified and as directed.

S & F in repair PVC tank cover suitable for1000 ltr capacity complete all as specified and as directed.

Cleaning and removing all scale and dirt, etc, from tanks of capapcity exc 500 & n.exc 1000 Ltrs and from mouths of circulating pipes, etc. using bleaching powder and washed with water including dismantling and reconnecting and refixing in psoition including writing date of cleaning with white synthetic enamel paint as "CLEANDED ON" complete all as specified and directed

S&F in repair concealed stop cock fancy type CP cast copper alloy screwed down high pressure with crutch or buttor fly handle screwed both ends for iron pipe or for unions and fixed 15mm bore complete all as specified and directed.

S&F in repair PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F in repair PVC Connections 15mm size with PTMT Nuts of length 600mm and fixed, complete all as specified and as directed.

S&F in repair angle cock fancy type CP cast copper alloy screwed down high pressure with crutch or buttor fly handle screwed both ends for iron pipe or for unions and fixed 15mm bore complete all as specified and directed.

S&F in repair Bib taps, cast copper alloy, cromium plated with crtuch or butterfly handle, sc-rewed down, screwed for iron pipe or for brass ferrule and fixed 15mm bore complete all as specified and directed.

S&F in repair Bib taps standard of PTMT 15mm Bore screwed down for high pressure, screwed for Iron Pipe and fixed, complete all as specified and as directed.

Supply and fixing in repair PVC waste pipe with 32 mm bore and 65 cm long with cap complete all as specified and directed.

S&F in repair swivel shower of CP any colour for fixing with 15mm pipe with shower arm 15mm size, 195mm long with bend of 45 degree with flange of any colour complete all as specified and directed.

S&F in repair Brass cromium plated towel rail 20mm dia, D type, 60cm long between flanges complete all as specified and as directed.

S&F in repairs Vitreous chine wash down water closet pan(padestal pattern), white(EWC) including plastic seat of same colour of WC, closed pattern with flat bottom, and cover mild steel chromium plated hinging device complete all as specified and as directed.

S&F in repair Vitreous china squatting pan, 'orissa' pattern, size 580 x 440 mm white, with integral footrest (excluding flushing cistern and flush pipe) including provision of concrete beddig and joint to flush pipe to squatt pattern closet including all joints and making good to the floor and taking down old one complete all as specified and as directed.

Supply and fix in repair vitreous china wash basin white flat back size 630x450mm including cutting for and pinning in ends of brackets or erecting stand,waste coupling,32 mm bore PVC waste pipe of suitable length, and connection complete all as directed complete all as specified and as directed.

Fixing in repair only Vitreous China wash basin, white, flat back, any size including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe complete all as specified and as directed.

S&F in repair 10 Ltrs capacity PVC flushing cistern valveles syphonic action type low level, white, with inlet ball valve, float & handle incl brackets & flush pipe complete all as specified and directed.

Fixing in repairs only ,10 litres capacity PVC valveless syphonic action type, flushing cistern low level with inlet, ball valve, float bracket & flush pipe complete all as specified & directed.

S&F in repair toilet paper holder chromium plated fixed to wall with CP brass screws complete all as specified and as directed by the Engineer-in-Charge.

S&F in repair 15mm bore cast copper alloy chromium plated fancy type wall mixture with telephonic shower arrangement with pipe bend (three in one) etc complete all as specified and as directed by the Engineer-in-Charge

S&F in repairs centre hole WHB mixture cp brass with casted swinging spout complete all as specified and as directed by the Engineer-in-Charge.

S&F in repair 15 mm bore Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed.

Supply and Fixing in Repair Waste coupling of of stainless steel any size for WHB / Sink (half or full threaded) complete all as specified and directed.

S/F for chromium plated health faucet for EWC screwed down to GI tubing/fittings 15mm dia incl 1200mm long stainless steel connection complete all as specified and directed.

S & F in repairs, PVC (SWR) 75 mm dia, floor trap, plain with grating including jointing to waste pipe with solvent cement complete all as specified and as directed.

S & F in repair Grating doom 100mm dia of PTMT (Minimum weight 25gms) with hole/ without hole including fixing with white cement and making good surface complete all as specified and directed.

S & F in repair Grating doom 125mm dia of PTMT (Minimum weight 25gms) with hole/ without hole including fixing with white cement and making good surface complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified and as directed.

Dismantling plain or corrugated steel sheeting , any gauge thickness including Nanital or similar pattern roof covering all as specified and as directed.

S&F, pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws /J hook complete all as specified and as directed.

M&L, Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screwscomplete all as specified and as directed.

S & F MS steel work in tubular trusses and tubular posts, purlin including special shaped washers etc.complete using ERW or induction butt welded tubes including one coat of zinc chromate primer paint all as specified and directed.

M & L two coat of synthetic enamel paint over one coat of red oxide, zinc chrome primer on steel surfaces, surfaces of any description , over 10cm width or girth not other wise described complete all as specified and as directed.

Ms Vinay constructions (BID ID -3253553)

M/S RAJ KUMAR SINGH (BID ID -3259747)

N K ENTERPRISES (BID ID -3253765)

DEVENDRA ENTERPRISES (BID ID -3254154)