RequiredOEM Authorization Certificate Bid to RA enabled Yes Crawler Hydraulic Excavator ( 1 pieces ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Bid Requirement (Allowed Values) Generic Parameters Conforming IS/ISO 7135:2009 Hydraulic Excavator (Crawler) Yes Yes Make - * Model - * Type of the excavator Crawler * Operating mass 13300 More than 11600.0 Or higher Shipping mass 13300 Any applicable numeric 1/10 value Engine manufacturer and model - * Ignition type Diesel Diesel Type of cycle 4 Stroke 4 Stroke Aspiration mechanically turbocharged * No of cylinders 4 * Bore 105 * Stroke 120 * Displacement (cc) 4160 * Max Engine horsepower 105 Any applicable numeric value Maximum Engine torque (Nm@rpm) 370.69 Any applicable numeric value Engine cooling system Liquid cooled * Type of fuel Diesel * Starter type - * Electrical system voltage (in volts) 24 * Bucket capacity to handle material of density 0.65 Any applicable numeric value ISO net flywheel power at given engine speed (hp@rpm) 97 Any applicable numeric value Maximum swing speed 12 11.8
Required12 Reach at ground level 7780 Any applicable numeric value Depth reach 5200 Any applicable numeric value Travel speed 5.5 Any applicable numeric value Gradeability (degree) 35 Any applicable numeric value Force at bucket curl at the Tip 102 Any applicable numeric value Stick crowding force 77.5 * Ground Pressure 0.43 * Operating weight 13300 Any applicable numeric value 2/10 Draw bar pull 13300 * Standard Boom 4600 Any applicable numeric value Standard Arm 2100 Any applicable numeric value maximum digging depth 5200 Any applicable numeric value maximum digging Reach 7920 Any applicable numeric value Rated Lift Capacity 8760 Any applicable numeric value fuel tank capacity 270 Any applicable numeric value Certification Vehicle Certification ARAI/VRDE/ICAT No * If No
Requiredmention the name of Vehicle Certification agency - * Vehicle Certification name and date - * Compliance with pollution standards
Requiredsafety standards of components and road worthiness as per CMVR rules Yes * Availibility of test report for the product from Any ILAC/NABl accredited/central government lab to be furnished to buyers on demand Yes * Responsibility of Registration with RTO Yes * IS/ISO 6165 : 2006 Earth moving machinery - basic types - Identification and terms and definitions Yes * IS 11114 : 2006 Earth- moving machinery - Definitions of dimensions and codes: Part 2 base machine Yes * IS 11114 : 2006 Earth- moving machinery - Definitions of dimensions and codes: Yes * 3/10 Equipment and attachments IS13116 : 2006 Earth- moving machinery -Engine Test Code - Net power Yes * Construction Parameters Overall length 7850 * Overall width 2600 * Overall heigth 2760 * Overall transport length 7850 * Width of upper structure 2600 * Track overall length 3750 * Track overall width when retracted 2600 * Track overall width when extended 2600 * Track shoe width 500 * Centre to centre - idler to sprocket 3000 * Upper structure ground clearance 940 * minimum ground clearance 440 Any applicable numeric value Tail swing radius (standard) 2280 * Tail swing radius (counterweight) 2330 * Backfill Blade height 0 * Backfill blade width 0 * Backfill blade rise above ground 0 * Backfill blade dig depth 0 * Maximum Cutting height 8140 * Maximum Loading height 8140 Any applicable numeric value Minimum Loading height 0 Any applicable numeric value Maximum vertical wall digging depth 4590 * Hydraulic pump system type - * 4/10 Hydraulic pump flow at given pressure (L/hr) 13440 * Hydraulic pump flow at given speed (L/hr) 13440 * Hydraulic system fluid capacity 210 * Hydraulic system output 86 * Cooling systsem fluid capacity 15.5 * engine crankcase fluid capacity 11.5 * pump drive fluid capacity 3 * Swing reduction 0 * Swing circle lubrication - * Swing lock - * swing drive fluid capacity 2.5 * Filteration system - * Fuel filters - * Air Cleaners Yes * Type of Steering Manual * Type of braking system Hydraulic * Type of final drive Planetary * final drive fluid capacity 3 * Type of Track - * Track dimensions 500 * Ground Contact area 3 * Number of shoes on each side 46 * Number of carrier rollers 2 * Number of track rollers 14 * Cab height 1650 * Crawler track height 728 * Clearance height under upper structure 940 * Undercarriage overall width 2600 * Shipping height 2760 * 5/10 Shipping height with guard rail 2760 * Shipping length 7850 * tail swing radius 2330 * Length to centre of rollers 3000 * Counterweight clearance 940 * Right-side upper structure distance from axles of rotation 1300 * cab width overall 1000 * Track gauge with track extended 2000 * track gauge with track retracted 2000 * Crawler overall length 7850 * Sprocket axis to axis of rotation (in degress) 0 * Upper structure rearmost distance from axis of rotation 2330 * Maximum dumping height for shovel 0 * Length of level floor cut 0 * Minimum level floor radius 0 * Muffler with rain cap Yes * Fuel Consumption for Earthwork application 13 * Maximum dig radius 7920 * Dig radius at groundline 7780 * Maximum dig depth 5200 Any applicable numeric value Vertical straight wall dig depth 4590 * Dump height 5710 Any applicable numeric value Overall reach height 7920 Any applicable numeric value Bucket rotation 2430 * Arm digging Force 77.5 * Bucket Digging 102 Any applicable numeric 6/10 Force (ISO) value Stick Digging Force (ISO) 77.5 Any applicable numeric value Bucket Digging Force (SAE) 87.3 * Stick Digging Force (SAE) 73.6 * Fully enclosed steel cabin with safety pipes window locking service doors and adjustable cushion seal Yes * Service hour meter Yes * Complete Instrumentation Yes * Starter key switch Yes * 2 working light and cabin light Yes * Electric Horn Yes * Parking brakes Yes * Emergency shut off Yes * Cabin/canopy :All round visible cabin
RequiredWith easy Walk Through Access Yes * Instrument Panel Yes * Cabin Instumental panel with audio indicators Yes * Cabin Instumental panel with visual indicators Yes * Seating Plan: Co- Adjustable driver seat with one helper seat No * Doors:-Front door with fixed toughened glass & locking mechanism with wiper Yes * Glasses:-Front wind screen
Requiredrear glass in two pieces glass Yes * Paint:Standard automobile paint to the exterior body as per CVMR rules Yes * Rear view large convex mirror Yes * 7/10 Front screen wiper Yes * Front and rear horn Yes * Number of roller 46 * Lift Path Yes * Cabin Entry and Exit Yes * Operation Control Yes * Length Without Attachment 4205 * Performance Parameters ISO net engine power (HP@rpm) 97 * Maximum travel speed (high) (km/hr) 5.5 * Maximum travel speed (low) (km/hr) 3.2 * Braking performance - * Tipping Load (kN) 33.8 Any applicable numeric value Digging Tool used Hoe * maximum force by Shovel/hoe/clamshell using arm cylinder (kN) 77.5 * maximum force by Shovel/hoe/clamshell using bucket cylinder (kN) 102 * Warranty time 1 * Operating hours during warranty period 0 Any applicable numeric value Battery warranty 1 * No Of Free services 7 * Maintenance cost for first 5000 Hrs (in Rupees) 200000 * Excavator Self propelled machine on crawlers having an upper structure capable of 360 degree swing and with mounted equipment which is primarily designed for excavating with bucket without movement of undercarriage during Yes * 8/10 work cycle Work cycle normally compromised excavating
Requiredelevating
Requiredswinging and discharging of material Yes * * Specifications highlighted in bold are the Golden Parameters. * Bidders may note that In respect of non-golden Parameters
Requiredthe specifications 'Values' chosen by Buyer will generally be preferred over 'Bid requirement ( allowed Values) by the Buyer.
