WBPHED/EE/AMD/ NIeT-11 of 2026-2027/1

Old but functional cable withdrawing from the river bed and soil trench by engaging skilled electrician to avoid any damaged.(3 Core X 10 Sqmm)

Making straight through joint between existing motor cable and submersible copper flat cable 3 Core X 6 Sq.mm for extension of motor cable upto required length by supplying necessary seal kit to make joints leak proof all complete as per direction.

Laying 3 Core X 10 Sqmm through existing soil trench/Masonry trench.

Laying of 3 Core X 10 Sqmm Al. Ar cable along the length of collecting line including fixing with supplied GI wire at a suitable interval so as to prevent sagging of cable complete as per direction of EIC.(From Kiosk To RBTWs)

Making straight through joint of 3 Core 10 mm² Al Ar cable with submersible flat cable-3 Core X 6 Sqmm by supplying Ferrul, rubber and other necessary materials to make the joint leak proof.(Without kit)

Withdrawing of Submersible pumping machineries from old river bed Tube Well along with Column pipe after disconnection of all pipe line and power line connection with the help of Derrick and Chain Pulley arrangement by engaging skilled technician as per direction of EIC.(10 H.P. S/M P/M.)

Lowering of Submersible pump Motor set along with 80 mm dia Column pipe part by part in the existing Tube Wells with an arrangement of Derrick and Chain Pulley arrangement, making Pipe line connection etc. all complete as per direction of EIC.(10 H.P. S/M P/M./15 H.P.)

Making straight through joint in between 3 Core X 10 sqmm Al Armoured cable by supplying necessary seal kit, to make joints leak proof all complete as per direction.(With Out Kit)

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials.(Finishing at Kiosk and Panel end)3 Core X 10 Sqmm.

Supply of 9 Amp, 3 Pole power contactor, 415 V AC, 50 Hz operating voltage-220-230 V AC.(Make:-ABB, )