82484 SPECIAL REPAIRS TO JUNIOR SAILORS BUILDING AT INS ADYAR UNDER AGE(I) NAVY CHENNAI

Amount

Dismantling floor hearth or wall tiling including cement mortar bedding and rubbish off the premises all as specified and as directed.

Material and Labour for Non- skid pin handed ceramic coloured tiles 7 to 8mm thick (square/Rectangular) area of each tiles exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in CM 1:6. complete all as specified and directed

Material and Labour for glazed ceramic coloured design tiles 450x300mm x 7mm thick in vertical surface etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick backing coat of CM 1:4 etc complete all as specified and directed

Material and Labour for Non-skid Ceramic coloured tiles 7 to 8mm thick (square/Rectangular) area of each tiles exceeding 0.36 Sqm but not exceeding 0.38 Sqm, (600x600mm) in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 15 mm thick screed bed in CM 1:6.complete all as specified and directed

Ditto all as per Item No-4 above but skirting, on walls including 10mm thick backing coat/ rendering on fair faces of brick work or concrete surfaces in CM (1:4) complete all as specified and directed

Material and labour for Vitrified light shade ceramic tiles 10mm thick (square/rectangular) area of each tile exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match for double charged tiles 15 mm thick Screed bed or bedding layer for laying floor finishes in CM (1:6) complete all as specified and directed

Ditto all as per Item No-6 above but skirting, on walls including 10mm thick backing coat/ rendering on fair faces of brick work or concrete surfaces in CM (1:4) complete all as specified and directed

Material and labour for Ready Mix Micro concrete of 25 to 40 mm thick consistency of Renderoc S2 or Renderoc RG of FOSROC in consistency a batch of 25kg of Renderoc mixed with water n exc 3.50 Ltrs and mixed with 1 kg of polymer acrylic fibbers all as per manufacturer's instructions and finished the surfaces even and smooth with 10mm thick rendering in CM 1:4 complete all as specified and directed by Engr-in-Charge including erecting necessary scaffolding (UP to G+5 Story ) Note:-(a) The following stages (a) to (d) are included of Materials and labour will be carried out :-

(a) Taking out existing unserviceable plaster loose/unsound weaken cement concrete of any description and in any position from existing surface of RCC roof slab/beam/column/RCC facia /RCC chajja with power driver of pneumatic chisel after cleaning of concrete/plastered particles and Removing corrosion and all loose scales rust etc from the visible reinforcement and cleaning the steel reinforcement properly.

(b) Applying one or more coat of NITO ZINK primer of FOSROC or equivalent ZINK primer of CHEMISTIC/WEBAC on visible reinforcement surface. Several time prior to placing, the concrete substrates should be saturated with clean water in case reinforcement completely rusted then remove or cut to length

(C) After drying of water applying bonding agent of modified styrene butadiene emulsion (SBR bonding agent i.e. Nito bond SBR Latex or Nito bond EP of FOSROC) in proportion 1 (Nito bond SBR latex): 1 (water): 3 (OP cement) by volume with the brushing etc to bind New CM plaster / Polymer Modified plaster / Concrete / Screed concrete with old surface.

(d) Providing fiber mesh jali fixed to existing RCC roof slab/beam/column/RCC facia /RCC chajja as per directed by Engr-in-Charge

Taking up & down steel tubing bore of pipe 15 mm connections, including cleaning and removal to store complete all as specified and directed.

Ditto as in item No. 9 but for 20 mm dia, complete all as specified and as directed

Ditto as in item No. 9 but for 25 mm dia, complete all as specified and as directed

Supply and Fix 20 mm outer dia 3-layer PP-R Polypropylene random copolymer concealed pipes SDR 7.4 (PN 16) UV stabilized and composite pressure pipes including all Crimp type internal sealing Plastic metal Composite fittings (such as elbows, tees, reducers, couplers, short pieces, connectors, etc.) and hooks (in case of concealed pipe work)/ clamps (in case of exposed pipe work) etc complete all as specified. having thermal stability for hot & cold water supply including all PP-R plain & brass treaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc complete all as specified.

Same as item No. 12 but for 25 mm dia complete all as specified and directed.

Same as item No. 12 but for 32 mm dia complete all as specified and directed.

Supply and Fix for 20mm outside dia PPR Gate valves (brass insert) as per requirement of site fixed to PPR pipes complete all as specified.

Same as item No. 15 but for 25 mm outside dia complete all as specified and as directed

Same as item No. 15 but for 32 mm outside dia complete all as specified and as directed

Supply and Fix in repairs for 110mm dia PVC pipe single socketed in any length with rubber joints fixed to walls with Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts every 1.5mtr interval and securing ends of stays to wall or roof including scaffolding up to height G+5 complete all as specified and directed.

Same as item No.18 but for 75 mm bore pipe complete all as specified and directed.

Supply and Fix PVC bends any radius bore of dia 110mm with access door all as specified.

Supply and Fix PVC bends any radius bore of dia 75mm with access door complete all as specified and directed.

Supply and Fix PVC (SWR) branch piece, single/ double T) equal or unequal of 110 mm with access door complete all as specified and directed.

Same as item No. 22 but for 75 mm bore pipe complete all as specified and directed.

Supply and Fix for PVC (SWR) vent cowl of 110 mm complete all as specified and directed.

Supply and Fix for 110mm PVC( SWR) WC connector with lip ring. of required length complete all as specified and directed.

Supply and Fix rotational moulded polyethylene water storage tank of 1000 ltrs capacity (cylindrical vertical with closed top) including dismantling of existing tank including all fittings i.e. tank nipple, of 25mm dia Ball brass valves, high pressure, with polythene float and fly nut etc. hoisted and fixed in position all as specified.

Supply and Fix rotational moulded polyethylene water storage tank of double layers of 500 ltrs capacity (cylindrical vertical with closed top) including dismantling of existing tank including all fittings i.e. tank nipple, of 20 mm dia Ball brass valves, high pressure, with polythene float and fly nut etc. hoisted and fixed in position all as specified.

Supply and Fix rotational moulded polyethylene water storage tank of double layers of 750 ltrs capacity (cylindrical vertical with closed top) including dismantling of existing tank including all fittings i.e. tank nipple, of 20 mm dia Ball brass valves, high pressure, with polythene float and fly nut etc. hoisted and fixed in position all as specified.

Supply and Fix in repairs EWC Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) but incl heavy duty seat cover complete set complete all as specified and as directed

Supply and fix in repair for low level flushing cistern 10ltrs capacity body moulded from virgin quality high impact poly polypropylene and functional parts moulded from engineering grade ABS nylon and nylon glan complete including brackets and 15mm bore 450mm long PVC connection complete all as specified and as directed

Supply and Fix in repair for Wash basins counter type, vitreous china of 550x400mm, including cutting for and pinning in ends of brackets or erecting stand inclusive of 32mm waste coupling and 1mtr waste pipe all as specified and as directed.

Supply and Fix PVC connections 15 mm size with PTMT nuts of length 600mm all as specified and as directed.

Supply and Fix for Fancy type CP stop/angular cock 15mm dia cast copper alloy, chromium plated fancy type screwed down high pressure with half turn of capstan heads, screwed both end for iron pipe or for unions and fixed. complete all as specified and directed

Supply and Fix for Fancy type CP stop valve 15mm dia cast copper alloy, chromium plated fancy type with long shank and cup (concealed type) screwed down high pressure with half turn type capstan heads, screwed both end for iron pipe or for unions and fixed complete all as specified and directed

Supply and Fix for Fancy type CP bib taps15 mm dia ,chromium plated cast copper alloy with half turn type capstan heads, screwed down screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed

Supply and Fix for pillar taps, 15mm fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe of bore of pipe fixed all as specified and as directed.

Supply and Fix for 125 mm dia Fancy type CP shower rose all as specified and as directed by Engineer-in-Charge complete all as specified and directed

Supply and Fix in repair for tubular towel rail, brass CP 20mm dia, 'D' type, 60cm long between flanges made of brass chromium plated complete all as specified and as directed.

Supply and Fix for Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed.

Supply and Fix for 75 mm dia outlet PVC (SWR) multi floor trap with grating including jointing with solvent cement complete all as specified and directed.

Supply and Fix in repair for PVC health faucet (ABS) with rubit cleaning system 1.25 m long, PVC flexible tube and ABS wall hook complete all as specified and directed.

Supply and Fix for stainless steel sink 1mm thick made of stainless steel for kitchen or laboratory with plugs, washers and wastes; including 40mm waste coupling , bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 600mm x 450mm bowl size 510mm x 330mm x 230mm complete all as specified and directed.

Supply and Fix for 32 mm Low density polyethylene (LDPE) pipes of pressure rating 6kgf/Sqcm complete all as specified.

Taking down chowkhats with shutters (without taking off shutters from the frame) not exceeding 1.5 sqm each complete all as specified and directed.

Taking down chowkhats with shutters (without taking off shutters from the frame) exceeding 1.5 Sqm but not exceeding 4 sqm each complete all as specified and directed.

Taking down Shutters of any description exceeding 1 sqm but not exc 2 Sqm each complete all as specified and directed

Taking down and refixing Shutters on same position of any description exc 1 sqm but not exceeding 2 Sqm each after floor finishes easing and adjusting of shutter etc

Supply and Fix for solid PVC door frame of size 50mm x 47mm made out of 5mm prelaminated colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specifications & drawings complete all as specified and directed.

Supply and Fix for factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2,4 or 6 raised panel designed with 4mm thick moulded PVC sheet on front face and 4mm plain colour PVC sheet on back face as per specification with wood free EPS and drawing complete all as specified and directed.

Supply and Fix 2nd class hard wood Plain, solid, straight, chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified.

Supply and Fix 35 mm thick 2nd class hardwood factory made Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified.

Supply and fix for 35 mm thick 2nd class hardwood factory made Glazed and skeleton fully and partially door shutters, open rebated and prepared to receive glass, gauze, etc. (with sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.20 (a); supplied and fitted to chowkhats complete all as specified.

Supply and fix for aluminium wire cloth 0.45mm nominal dia of wire and 1.40mm average width of aperture and fixed with aluminium wire staples complete all as specified and directed.

Material and Labour for aluminium Powder coated ventilator, louvers type, frame top & bottom of size 31x42x1.60mm (section No 20558) rectangular tub of size 40x20x2mm (section No 14019 and middle vertical of size 42x46.20x1.60mm Section (20560) and clip for fixing wire mesh and glass of size 19x17.30x0.90mm (section No 19360) thick including aluminium wire cloth 0.45mm nominal dia of wire and 1.40mm average width of aperture and fixed with aluminium wire staples and supply and fixing 5mm thick frosted/pinheaded glass louvers with blades of 100mm heavy duty with necessary rubber beading, gasket etc all as specified and as directed by Engineer-in-Charge.

Supply and Fix for Anodised aluminium grill DG 102 of 10 mm dia rod square/rectangular/circular or similar type of shape aperture/ width 10 mm and 5.2 mm dia fixed with H or F channel 38 x 12 mm aluminium frame with grill complete all as specified.

Supply and Fix for 75 mm long mild steel butt hinges heavy weight ,and fixed to frame with screwed or welding complete..

Supply and Fix for 200mm long aluminium anodized barrel tower bolts of extruded section and fixed.

Supply and Fix for 150mm long aluminium handle cast type anodized all as specified and as directed by Engineer-in-Charge.

Supply and Fix for 300mm aluminium alloy anodized sliding door bolt with haps and staple (bolt type) and fixing clip of sheet cast or extruded section or cast aluminium alloy and fixed complete all as specified and directed.

Taking down cement Plaster , any description, on brick walls or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.

Material and Labour for 15mm thick Rendering in two coats of (10 mm thick on first coat and 5mm thick in second coat) on fair faces of brick work or concrete surfaces in CM (1:4) using with WPC @ 3% by wt of cement on second coat complete all as specified and directed. ( Note : WPC shall be measured and paid separately)

Supply only Integral water proofing compound complete all as specified and as directed.

Material and Labour for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM (1:6) finished even and smooth (without extra cement) complete all as specified and directed.

Material and Labour for 10 mm thick rendering in CM (1:3) on ceiling on soffits and finished even and smooth (without using extra cement) complete all as specified and directed

Material and labour for preparation of newly plastered / concrete surfaces and applying two coats of oil bound distemper over a coat of primer over one or more coat of wall care putty complete all as specified and directed.

Material and Labour for complete removal of existing surfaces including washing / rubbing down with water of wall and applying two coats of oil bound distemper/emulsion over coat of alkali resistant primer including chalk whiting over one or more coat of wall care putty and including necessary scaffoldings as reqd etc complete all as specified and directed.

Material and labour for Preparation of new surfaces of wall and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces and over 2mm thick exterior Birla wall care putty in two layers all as per manufacturer instruction and including necessary scaffoldings upto G+4 etc complete all as specified and directed.

Material and Labour for complete removal of existing treatment on walls including washing down, rubbing down and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. and over 2mm thick exterior wall care putty in two layers all as per manufacturer instruction and including necessary scaffoldings upto G+4 etc complete all as specified and directed.

Material and Labour for Preparation new plastered surfaces and applying three coats of white wash on ceiling complete all as specified and directed.

Material and Labour for Preparation Old decorated surfaces and applying two coat of white wash on ceiling complete all as specified and directed.

Material and labour for preparation of new wooden surfaces of any description over 10 cm width or girth not otherwise described and applying two coats of Synthetic enamel painting over a coat of wood primer complete all as specified.

Same as item No. 73 but one coat of synthetic enamel paint on old treated wooden surfaces.

Material and labour for preparation of old steel surfaces and applying one coat of Synthetic enamel paint on steel surfaces complete all as specified.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth complete all as specified.

Cutting holes in brick walls exc half brick but not exc one brick walls built in cement mortar for inserting holdfasts/ rafters /pipes etc and making good dismantled portion in cement mortar (1:3) or cement concrete (1:2:4) type B-1 as required all as specified and directed.

Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar complete all as specified and as directed

Material and labour for 20 mm thick machine cut, Granite stone slab (of any type)(table rubbed and polished) in steps, jambs, pillars, windows, cills, cooking platforms and like in cement mortar 1:4 bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing types and making mould on edges & including cutting for the shape for SS Sink & including 15 mm thick screed bed in CM 1:6 complete all as specified and as directed.

Material and labour for 16 mm thick machine cut, Granite stone slab (of any type)(table rubbed and polished) for wall lining ( veneering to wall) bedded on 10mm thick cement mortar 1:4 and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing types and making mould on edges as required at site complete all as specified and as directed

Supply and fix in repair for aluminium wire cloth 0.45mm nominal dia of wire and 1.40mm average width of aperture and fixed with aluminium wire staples fixed in repair to aluminium fixed / sliding windows, aluminium ventilators, wooden wire mesh doors, PVC wire mesh doors including teak wood beading for wooden doors etc complete all as specified and directed.

Supply and fix in repair for 28 mm dia aluminium powder coated tubular fancy type drapery rod with and including two nos of bracket/holders suitable for drapery 28mm dia rods of one window / door openings etc complete all as specified and as directed.

Supply and fix in repair for 12 mm thick marine plywood fixed with nails/ screws to frame works as in cabinets cupboards with SS angles cleats etc complete all as specified and as directed.

Supply and Fix for 18/19 mm thick marine plywood fixed with nails/ screws to frame works as in cabinets cupboards with SS angles cleats etc complete all as specified and as directed.

Supply and Fix for white laminates of 0.8mm thick glossy finish colour and pattern as approved adhesive complete all as specified and as directed

Supply and Fix for decorative laminates of 1mm thick glossy finish, colour and pattern as approved adhesive complete all as specified and directed

Supply and fix for CP decorative type Brass handles, cast type, polished bright handles 75mm long fixed to plywood or frame complete all as specified and directed

Supply and Fix for magnetic and connected plate to shutter and frame as per sample complete all as specified and as directed

Supply and Fix for 80mm Auto SS hinges of crank 0 degree to 90 degree, fixed with screws to plywood or frame work complete all as specified and as directed as per sample approved by EIC

Material and labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates, chains etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed.

Supply and fix for 15mm bore chromium plated sink cock with angular knob of cast copper alloy fancy type with long body, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. Make: Model No SOL-6359 of Jaquar or equivalent as mentioned in PS.

Supply and Fix 2nd class hard wood newel post, balusters, wrought with square, rounded, chamfered or stop, chamfered edges, mortice for strings and handrails, sec area exc 100 x 100 mm complete all as specified.

Supply and Fix 2nd class hard wood as in Balusters, square wrought and fixed, with ends housed (square or splay) to handrails and treads or strings sec area not exceeding 50 x 50 mm complete all as specified.

Supply and Fix for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, and hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed

Removal of building materials/debris to a distance of 5 KM each load capacity 6 cum per vehicle complete all as specified and directed.

Taking down carefully any type point wiring (light, fans, socket etc) complete including battens and fittings such as switch, ceiling rose, light fittings, regulators, socket etc. and making good disturbed surface of wall/floor, etc complete all as specified and as directed

Material and labour for Point wiring complete with FRLS PVC insulated unsheathed cable 1100V grade conforming to IS-694, 1.5 Sqmm (nominal area) multistranded with copper conductor drawn through and including non metallic rigid PVC conduit 20mm dia (ISI marked) and accessories, concealed in wall / surface on ceiling with sunken type pressed steel / welded terminal boxes made out of 2mm mild steel sheet, of suitable module including provision of FRLS PVC insulated unsheathed 1.5 Sqmm FRLS multistranded with copper conductor as earth continuity conductor and connecting to common earth dolly excluding modular metal box and white cover plate with frames, switches, sockets, regulators etc.. suitable for modular type fittings/ fixtures complete all as specified and as directed for the following:- Note: Modular metal flush boxes, cover plates, switches and sockets shall be measured and paid for seperately.

One light point controlled by one switch

One fan point controlled by one regulator/ switch

One 3 pin socket outlet 5 amps socket on same board

One 3 pin socket outlet 5 amps socket on independent board

Same as item No. 97 here in before but 3 pin socket outlet 16 amps sockets on independent board with 2.5 sqmm multistranded copper PVC insulated cable complete all as specified and as directed .

Material and Labour for ceiling rose, surface Bakelite, 65x50mm, two to three terminals, complete all as specified complete all as specified and as directed.

Supply and fix for Modular bell push, 1 Module complete all as specified and directed.

Supply and fix for bell multi music type complete all as specified and directed.

Supply and fix switch modular type, Single pole one way 6amps complete all as specified and as directed

Supply and fix switch modular socket type 1way 16Amps, 240 volts complete all as specified and as directed

Supply and fix socket modular type 6Amps, 2/3pin combined, 2module, 240 volts complete all as specified and as directed

Supply and fix socket modular type 6Amps/16Amps, 2/3 pin combined, 2module, 240 volts complete all as specified and as directed

Supply and fix in repair for Modular Fan step regulator, 120 W, 2 Module complete all as specified and directed.

Supply and fix for Modular white cover plate with frame, 1 Module complete all as specified and directed.

Supply and fix for Modular white cover plate with frame, 3 Module complete all as specified and directed.

Supply and fix for Modular white cover plate with frame, 6 Module complete all as specified and directed.

Supply and fix for Modular white cover plate with frame, 8 Module complete all as specified and directed.

Supply and fix Modular Metal flush box, 1/2 module complete all as specified and as directed.

Supply and fix Modular Metal flush box, 3 module complete all as specified and as directed.

Supply and fix Modular Metal flush box, 6 module complete all as specified and as directed.

Supply and fix Modular Metal flush box, 8 module complete all as specified and as directed.

Taking down old sub main wiring of any type or size including making good to disturbed surface all as specified and directed.

Sub main wiring with four runs of single core 10sqmm multi stranded copper conductor PVC insulated unsheathed cable 1100 volts grade and one run of 10sqmm multi stranded copper conductor cable as earth continuity conductor drawn into and including non-metallic rigid PVC conduit 32mm dia/PVC casing capping 32mm including conduit accessories all as specified and as directed. Note: Five runs of 10sqmm cable and one run of 32mm conduit/casing capping will be measured as one unit length.

Sub main wiring with two runs of single core 6 sqmm multi stranded copper conductor PVC insulated unsheathed cable 1100 volts grade and one run of 6 sqmm multi stranded copper conductor cable as earth continuity conductor drawn into and including non-metallic rigid PVC conduit 25mm dia/PVC casing capping 32mm including conduit accessories all as specified and as directed. Note: Three runs of 6 sqmm cable and one run of 25mm conduit/casing capping will be measured as one unit length.

Disconnecting electric connections, dismantling from position unserviceable DBs for taking into credit complete all as specified and as directed

Supply and fix sheet metal enclosure powder coated double door for Distribution Board, TPN 4way DB with Degree of protection IP42, Detachable Gland Plate, Box insertion Marks, circuit identification Label, Neutral Link, Earth Link, Tin plated, Bus bar including, Disconnecting electric connections, dismantling from position unserviceable DBs complete for taking into credit all as specified and as directed

Supply and fix sheet metal enclosure powder coated double door for Distribution Board, SPN 8way DB with Degree of protection IP42, Detachable Gland Plate, Box insertion Marks, circuit identification Label, Neutral Link, Earth Link, Tin plated, Bus bar including, Disconnecting electric connections, dismantling from position unserviceable DBs complete for taking into credit all as specified and as directed

Supply and fix MCB SP 5 to 32Amps B curve including, disconnecting electric connections, dismantling from position unserviceable MCB for taking into credit complete all as specified and as directed

Supply and fix MCB SPN, 40Amps B curve including, disconnecting electric connections, dismantling from position unserviceable MCB for taking into credit complete all as specified and as directed

Material and labour for earthing complete with galvanised steel earth plate of size 60cm x 60cm x 6mm thick, buried directly in ground (earth pit not less than 2.25m deep below ground level) with top edge of earth plate not less than 1.5m below normal ground level, connected to galvanised earth lead wire 4.0mm dia as earthing lead by means of bolts, nuts, check nuts and washers of copper all as shown in electrical plate No. 3 in SSR part 1 (2010 edition) connected to earthing test point, including 20mm GI pipe (Medium grade) for watering and 40mm GI pipe (Medium grade) for protection of earth strip and etc. including testing on completion, PCC chambers in PCC 1:3:6 type C1, RCC M25 type cover slab 50mm thick with 8mm dia TMT HCR/CRS steel bars at 140mm C/C both way and lifting handle GI funnel & wire mesh, funnel, lugs and charcoal, salt etc all as applicable complete all as specified and as directed by Engineer-in-Charge including removing old unserviceable earthing.

Material and labour for Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 4mm dia galvanised iron or steel wire complete all as specified and as directed

Supply and fix in repair wall mounted LED batten with decorative end cap of capacity 4 feet 20W or nearest higher wattage, 2500 lm , 6500 K suitable for Surface, wall & conduit mounting complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size and lamp complete all as specified and directed internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed. Make: C&S Electric Cat part. No. LTTB4F20WLED/ W or equivalent as mentioned in PS

Supply and fixing LED lights fitting 1X10W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed Make: C&S Electric Cat Part No: LTTB2F10WLED/W or equivalent as mentioned in PS

Supply and fixing LED luminaries 600mm x 600mm, 40watt, 240V AC receded type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable complete all as specified and as directed Make:Galanos Arteson LED Panel 600x600 or equivalent as mentioned in PS

Supply and fixing LED street light fitting 35/40 Watt 230 V AC outdoor type with pressure die cast aluminium hosing and heat resistant complete with drivers, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed . Make: Crompton Cat Part No: LSTS-40-CDL-M or equivalent as mentioned in PS

Supply and fix new GI bracket made out of 25/32/40mm dia GI pipe length 1.2mtr long bent to an angle 135degree including two coats of aluminium paint over a coat of zinc chromate primer along with clamps, bolts, nuts etc including removing old unserviceable GI bracket complete all as specified and as directed

Taking down and refixing of the LED light fitting 2''/4'' batten type, complete all as specified and as directed

Taking down and refixing of the LED light fitting 2''X2'' feet ceiling light of any type, complete all as specified and as directed

Banyan Engineers and Contractors

lakshmibuilders

kvs constructions