SPECIAL REPAIR TO AIRMEN COOK HOUSE AT SONEGAON NAGPUR.

Amount

Demolition of cement concrete (unreinforced) in ground floors and paving n. exc 15 cm thickness (below or above GL) removal of rubbish/debris

Taking down cement plaster/ terrazo tiles on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.

Dismantling of unserviceable floor, hearth or wall tiling including cement mortar bedding (but not backing) and removal of rubbish/debris from premises of MOD Land.

Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for

Demolition of cement concrete of any description and in any position not otherwise specifically provided for

M &L for Plain cement concrete in foundation filling type B-2 1:2:4 (40 mm graded aggregate) and mass concrete

M & L Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built i inCM (1:6) all as specified.

M&L for 15mm thick rendering CM 1:6 on fair faces of brick work for internal wall plastering with a smooth finish

M&L for screed bed or bedding of layer 15 mm thick in CM (1:4) for laying of floor finishes

M&L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete

M&L for 15mm thick rendering CM 1:4 on fair faces of brick or concrete surfaces for laying of kota stone skirtings/dados all as specified

Ditto all as per description in item no. 11 above but in vertical surfaces such as skirting/Dado.

M&L Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite of thickness 20mm .complete all as specified and directed.

M & L APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application incl cleaning & removing of existing treatment of roofs and incl 15 mm thick cement plaster in CM 1:3 complete all as specified and applying a coat of aluminium paint over the APP all as specified

Providing and fixing Gypsum Board 12mm thick 600x600 in ceiling fixed with screw as per manufacturers instructions incl necessary framework of size 600x600 fixed all as spec and directed

Rendering 10mm thick on fair faces of brick work or concrete surfaces using C M 1:4

M&L ceramic glazed colour tiles size 300x200x5to 6mm as in dado/skirting set and jointed in neat cement slurry and pointed in coloured cement to match.

M&L for Preparing newly plastered surfaces of wall and applying two coat of OBD over a coat of chalk whitening incl one coat of primer all as specified and directed

M&L for Preparing old decorated surfaces of wall and applying one coat of OBD all as specified and directed

M&L vertified Ceramic tile light shade 10mm thick (square /rectangular) polished area of each tile nexc. 0.36 sqm ,in floor etc .Set and jointed in neat cement slurry and pointed in white or coloured cement to match.

Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes using C M 1:6 all as specified and directed.

Ditto all as item no 21 above but in vertical surfaces such as skirting/Dado.incl backing coat plaster CM 1:3 10mm

Rendering 10mm thick on fair faces of brick work or concrete surfaces using C M 1:4

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers,lintels, cantilevers, shelves including supports,overhangs,etc. also splays between floors andbeams, etc. for rough finished surfaces of concrete.

Formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work incl attached pillasters, buttresses, etc, vertical or to batter

Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

Ditto, but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders

M &L RCC (nominal mix) in beams, cantilevers, bressumers, lintels over 1.5 m span type B0 1:2:4 (20 mm crushed stone aggregate)

M &L RCC (nominal mix) foundations incl rafts , footings, foundation beams, plinth beams, bases for columns etc, basement slabs, under reamed piles and mass using B1 1:2:4

M &L RCC (nominal mix) walls, retaining walls, basement walls, ballast walls and the like, any thickness, above top of footings, incl attached pilaster and buttresses using type B1 1:2:4 (20 mm graded aggregate)

Dismantling water tanks of sixe 1000 lts and removing to store

S & F 1000 ltr capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I

S & F 20 mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0 m m - 2 1 0 g m s . / 25mm-455gms/ 40mm - 690 gms)

Taking down carefully copper/aluminium point wiring any type ,surface/concealed/ PVC capping or tubing ( including light,fan,s/socket, or power)complet fittings such as switches,ceiling rose,pendents,regulators,sockets etc complet

Taking down old unserviceable main switch board, DB of any type and capacity from its location with accessories MCCB's/MCB SP/SPN/TPN complet,

Taking down old unserviceable tube light/cfl light/recessed mouted light or any type of light fittings complete all as directed.

Taking down old unserviceable Sub Main wiring any type any capacity including conduits from its location & making good of distrube surface all as directed.

Taking down old unserviceable surface mounting fixed cable 3.5 core16/35/50/70 sq mm or any capacity

Taking down and refixing ceiling fan/cabin fan/ air ceculating fan/ exhaust fan with cleaning & painting of ceiling fan completewith synthetic enamel paint by spreaying including filling cavities with filler complete all as directed by E- in- charge after minor repairs

M &L for PVC concealed conduit point wiring with 1.5 square mm nominal area stranded copper conductor PVC insulated single core cable1100 Volts grade conforming to IS694 part-i draw in20 mm size PVC conduit in concealed including 600volts grade 1.5square mm copper stranded single core cable green color PVC insulatedfor contineuous earthing wire with complete chesscutting ,S/F of 20 mm dia PVC conduit with elbow,bends,couplers,tee, sucken boxes pressed steel box mounting fitting/junction boxes etc covered the conduit with cement mortor after drawing of electric cables and makig good of distrubed surfaces and match with existing shade of wall/roof all as directed by Enginner -in -charge. For the following:- (a) One light point controlled by one switch

(b) One Fan/Exhaust Fan controlled by one switch

(c) One three pin 5 Amps switch socket outlet on independent board

(e) One three pin 5 Amps switch socket outlet on same board

M &L for PVC casing capping surface point wiring with 1.5 square mm nominal area stranded copper conductor PVC insulated single core cable1100 Volts grade conforming to IS694 part-i including 600volts grade 1.5square mm copper stranded single core cable green color PVC insulatedfor contineuous earthing wire complete with PVC casing capping,elbow,bends,couplers,tee,switch mounting box top covered with white hylam sheet,fixing screws mounting fitting/junction boxes etc and makig good of distrubed surfaces and match with existing shade of wall/roof all as directed by Enginner -in -charge. For the following:- (a) One light point controlled by one switch

(b) One Fan/Exhaust Fan controlled by one switch

(d) One three pin 5 Amps switch socket outlet on independent board

(e) One three pin 5 Amps switch socket outlet on same board

ditto- all as per item No.41 here in before but point wiring with 2.5.0 sqmm multistrandard copper cable for 5 Pin 15 Amp switch socket combination on Independent board with one run of 1.5 sq mm multistranded copper cable green colour for earth continuity conductor complete .

ditto- all as per item No.45 here in before but point wiring with 2.5 sqmm multistrandard copper cable for 5 Pin 15 Amp switch socket combination on Independent board with one run of 1.5 sq mm multistranded copper cable green colour for earth continuity conductor complete .

Refixing of switch piano, flush type single pole,5 Amps, 240 Volts Ac complete .

S&F switch piano, flush type single pole,5 Amps, 240 Volts Ac complete .

Refixing of ceiling rose surface backlite, 65x50mm, three terminals, 5 Amps,240 Volts AC retrived from item no 35

S&F ceiling rose surface backlite, 65x50mm, three terminals, 5 Amps,240 Volts AC

Refixing of switch socket combination 5 Pin,5 Amps,240 Volts, flush type complete. complete retrived from item no 35

S&F switch socket combination 5 Pin,5 Amps,240 Volts, flush type complete.

Refixing of switch socket combination 2 IN 1, 3 PIN,5 and 15 flush type universal ,240 Volts, complete retrived from item no 35

S&F switch socket combination 2 IN 1, 3 PIN,5 and 15 flush type universal ,240 Volts, complete .

Refixing of Tube light fitting /cfl/LED light fitting wall mounted or recessed mounted any type any make any capacity after taking down complete retrived from item no37.

Supply and fix LED tube light fitting capacity 20 watt fixed on wall/surface / ceiling with all accessories tube,driver,with surge protector completerewired with multistranded copper cable & connecting to ceiling rose with 3 core ,multistranded flexible copper cableMake CGCta No-CCS-100-20-65-HL2-DP-NWH/Havells/philips/Bajaj.

Refixing of cable any size any capupto 70sqmm fixed on wall/trench with clamps & saddle properly as directed by E-in-charge retrived from item no 39

Refixing of fan step regulator,120 W,220/230 V AC.retrived from item no35

S & F Fan regulator stepped type electronic fan regulator flush type on the phenolic laminated sheet as directed.

S & Lay concealed sub main wiring with two single core cable of 6 sqmm PVC insulated , 1100 volt grade as per IS 694, with multistranded copper conductor in and including rigid PVC conduit (ISI Marked) including earthing wire of pvc insulated stranded 4 sq mm cable ,chess cutting including S/F of 20 mm dia PVC conduit with elbow,bends,couplers,tee, sucken boxes pressed steel box mounting fitting/junction boxes etc covered the conduit with cement mortor after drawing of electric cables and makig good of distrubed surfaces and match with existing shade of wall/roof all as directed by Enginner -in -charge.

S&F sheet metal enclosure DB 4 way 240Volt with bus bar semi conceled type with necessary connection model no-Legrand DB with incoming slot for MCCB as incomer Make-egrand,Havells,Indoasian.

S&F sheet metal enclosure DB 8 way 240Volt with Bus bar semi conceled type with necessary connection model no-Legrand DB with incoming slot for MCCB as incomer Make-egrand,Havells,Indoasian.

Refixing of DB's including all existing isolator/mccb,s/mcb,s safly as per the directed by E-in-Charge retrived from item no 36

S&F MCBs 6 Amp with necessary connection in DB box

S&F MCBs 10 Amp with necessary connection in DB box

S&F MCBs 20 Amp DP with necessary connection in DB box

S&F isolator TPN 63A with necessary connection in DB box

S&F isolator DP 40A with necessary connection in DB box

Disconnecting outer & inner unit of Air-conditioning icluding Voltage stablizer unit of any capacity including cutting of copper tubes including shifting of outer unit from roof of the building with provision of angle iron anchor pickets made out of 25mmX25mmX5mm angle iron with suitable size of MS plate with installation of outer & inner unit of AC with the suitable space for further maintenance including necessary gas charging / topping up R-22 /410C with soldering of copper tubes all as specified and directed.

S&Fsemi grouting industrial socket & plug powder coated made of CRCA sheet complete box comprised with MCB, SP 32 AMP 12 KAMP reputuring cap.

SRI JD CORPORATION

karambir constructions

M/s S. S. MUNDE

M/S L M Chourasia