Detailed estimate for repairs to various stage of submerssible, VTP and Centrifugal motor a pumps with allied accessories at pandavapura town water supply.

Detailed estimate for repairs to various stage of submerssible, VTP and Centrifugal motor a pumps with allied accessories at pandavapura town water supply.

Supplying fully automatic star-delta starter unit pushbutton type with suitable wires, 3contactors, one adjustable thermal timer mounted on a common base plate held in steel enclosure for use on 400-4...

Rewinding of submersible pumpset with copper winding wires of appropriate guage, as per specifications and or directions of the departmental officials, including all materials, labour, equipment and t...

For all types of submersible pumpsets above 3 HP and upto 5.0 H.P

For all types of submersible pumpsets above 7.0 HP and upto 7.5H.P

For all types of submersible pumpsets above 9.5 HP and upto 10.0H.P.

Replace the components of submersible pump sets, requiring replacements decided by the departmental officials, with respective make of damaged ones, including all materials, labour, equipments and tes...

The Intermediate piece (IP) with IP leaded bronze brush.

The Oil Seal.and steel bush

The Impeller (Shell moulded with aluminium and bronze.)

The discharge outlet (DO) bearing DO steel brush DO bearing.

The steel bearing bush (DO steel bush)

The allen screw

The pump shaft made out of stainless steel counterless ground with key way (upto 8 stages).

The pump key (stainless steel)

The pump coupling (stainless steel)

The Non Return Valve (NRV) assembly complete with rubber O ring.

The cable guard

The brass filter

The Labour Charges for overhauling of the pump set.

Replace the components of motor parts of submersible pump sets, items requiring replacements decided by the departmental officials, with respective make of damaged ones, including all materials, labou...

The STATOR of motor 4 to 5 H.P (5+7.5+10HP)

The ROTOR of motor upto 3.0 H.P

The ROTOR motor 4 to 5 H.P (5+7.5+10HP)

The upper flange

The lower flange

upper/ lower housing

The Carbon Housing

The Carbon Housing (Thrust bearing block assembly complete with segment bearing pad.

The Carbon Housing (Top carbond - ferrodo padding)

The Stud and Nuts

The Gun Metal bearing, centrifugally cast Aluminium Bronze bearing bush

The Motor base with pin

The Transportation of pumping machineries

The Re-errection charges of pumping machineries including overhauling and painting

The lifting of submersible pumpset from well.

The Labour charges only for overhauling

Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990 with ISI Mark and as per its latest amendments.

Supply and delivery at site of brand new best make gate valve as per IS 778-1984 with ISI Mark and as per its latest amendments

Supply and delivery at site of brand new best make non-return valve as per IS 778-1984 with ISI Mark and as per its latest amendments Size 50 mm

Supply, installing,testing and commissioning COMMON control panel co nsistig of the following INCOMING:1 No set of Phase indicating lamps with SFU of suitable rating 1 No, Analog Ammeter, 1 No Analog ...

3 to 6 HP pumps

6 to 15 HP pumps

Supply and delivery at site delivery of best indigenous brand new MCB(Miniature Circuit Breakers) of required capacity as per IS 88228/1978 and its latest amendments and with ISI Mark of 6/10/16/20/25...

Supply and delivery of galvanized mild steel tubes of 6mtr standard length heavy duty (C Class) as per IS 1239 (Part-I) 1990 with latest amendments with ISI Mark (one end fitted with Heavy Duty collar...

Providing and fixing suitable for 1.1 KV class UG cable filled with necessary bitumen/insulating compound complete with terminals, clamps,bolts,nuts and washers etc. with necessary materials and labou...

Providing and fixing suitable for 1.1 KV class UG cable filled with necessary bitumen/insulating compound complete with terminals, clamps,bolts,nuts and washers etc. with necessary materials and labou...

ALL TYPES OF JACK WELL V-T PUMP DETAILS as per ISI specifiction with guarantee period of not less than 12 months -For Pump dismentaling and refitting after attending repairs.-Up to 60 HP

For Top body bush fitting - Up to 60 HP

For Bottom body bush fitting -Up to 60 HP

For Pumps stage body bush fitting Each-Up to 60 HP

For Pump body necking fitting Each - Up to 60 HP

For Impeller breezing making - Up to 60 HP

For Pump shaft press throwble - Up to 60 HP

For Pump open & fitting at work shop - Up to 60 HP

For Connecting bush G.M new making Each - Up to 60 HP

For Line shaft seat welding making Each - Up to 60 HP

For Oil inside new Fitting & threading Each - Up to 60 HP

For Balancing spaider rubber guide Each - Up to 60 HP

For New T.T nipple making - Up to 60 HP

For Pump gear box body radial bearing - Up to 60 HP

For Gear box ball bearing - Up to 60 HP

For Pumping and clean pipe painting - Up to 60 HP

For Transportation charges both side - Up to 60 HP

Removing & refixing the pump after repairing of existing horizontal mounting-monoblock pump with following spares, etc. including aligning of pump with reference to motor & running the pump on load. -...

Repairs of Booster Pumps 20 HP to 30 HP - At WTP Krishna nagara - For- 30HP

Repairs of Booster Pumps 40 HP to 50 HP -At Harohalli pump house. For-50HP

Repairs of Booster Pumps 100 HP to 150 HP- At WTP Darasaguppe For-120HP

Providing and supplying bleaching powder

Supply of Engine Oil