Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹17.5 LAccepted-AOC | ₹17.5 L Quoted ₹20.0 L | L1 | Accepted-AOC work is completed |
| 2 | L-2₹20.6 L+₹61,675 (3.09%)Rejected-Finance HIMACHAL PRADESH HP | ₹20.6 L+₹61,675 (3.09%) | L-2 | Rejected-Finance quoted rates are high |
| 3 | L-3₹21.5 L+₹1.5 L (7.66%)Rejected-Finance GOVT CONT VILLAGE AND P O NANIKHAD TEHSIL BHATTIYAT AND DISTT CHAMBA H P | ₹21.5 L+₹1.5 L (7.66%) | L-3 | Rejected-Finance quoted rates are high |
| Sl No | Description | Qty | Unit | PRAGATI TOWERS CORPORATION L1 | Ajay Kumar L2 | A.R ENTERPRISES L3 |
|---|---|---|---|---|---|---|
| 1.00 | Transportation of Rig along with allied acessories etc complete inculding errectiob and levelling at site through all kid of roads, approaches fields etc.complete in all respect withinall leads and lift as per the direction of Engineer in Charge. | 1 | Job. | 45,000 ₹45,000 Lowest | 50,000 ₹50,000 | 45,000 ₹45,000 Lowest |
| 2.00Drilling bores of as per per specification laid down IS 2800-1991 ( part-1) with up to date ammendments,if any with percussion Rig /Direct Rotary Rig or combination drilling Rig staring with 650-600 mm dia M.S. pipe reduced to 450 -400 mm dia MS pipe confirming to IS 4270-2001 with up to date ammendements ,if any ,all kind of soils ,boulders, rocks,collapsible strata saturated soils, artesian conditions inculding the cost of all consumable , stores water,fuel,lubricants and other accessories etc. complete in all respect as per the direwction of Engineer in charge. | ||||||
| 2.10 | Drilling and lowering of MS casting pipe confirming to IS 4270-2001 with up to date ammendents, if any ,of suitable sizes as mentioned above from 0-3 mtrs below ground level within all leads and lifts. | 3 | mtrs. | 10,000 ₹30,000 Lowest | 11,500 ₹34,500 | 12,000 ₹36,000 |
| 2.20 | Drilling and lowering of MS casting pipe confirming to IS 4270-2001 with up to date ammendents, if any ,of suitable sizes as mentioned above from 3-30mtrs below ground level within all leads and lifts. | 27 | mtrs. | 11,800 ₹3,18,600 Lowest | 12,000 ₹3,24,000 | 12,250 ₹3,30,750 |
| 2.30 | Drilling and lowering of MS casting pipe confirming to IS 4270-2001 with up to date ammendents, if any ,of suitable sizes as mentioned above from 30-60mtrs below ground level within all leads and lifts. | 30 | mtrs. | 12,200 ₹3,66,000 Lowest | 12,300 ₹3,69,000 | 12,500 ₹3,75,000 |
| 2.40 | Drilling and lowering of MS casting pipe confirming to IS 4270-2001 with up to date ammendents, if any ,of suitable sizes as mentioned above from 60-90 mtrs below ground level within all leads and lifts. | 30 | mtrs. | 12,500 ₹3,75,000 Lowest | 12,500 ₹3,75,000 Lowest | 13,000 ₹3,90,000 |
| 2.50 | Drilling and lowering of MS casting pipe confirming to IS 4270-2001 with up to date ammendents, if any ,of suitable sizes as mentioned above from 90-100 mtrs below ground level within all leads and lifts. | 10 | mtrs. | 14,500 ₹1,45,000 | 13,000 ₹1,30,000 Lowest | 13,500 ₹1,35,000 |
| 3.00 | Collection ,preservation and display of suitable size sample box with top lid and locking arrangement till handing over the tube well to the department complete in all respect as per the direction | 1 | No | 2,000 ₹2,000 Lowest | 2,500 ₹2,500 | 2,200 ₹2,200 |
| 4.00 | Supply and lowering of IS marked Electric Resistance Welded MS pipe 300 mm dia nominal size housing ,8 mm thick having out side dia mtrs 323.90 mm bevelled edge confirming to IS 4270--2001with up to date ammendments.if any ,about 4 mtrs to 7 mtrs in length ,welded without any circumferential joints, into bore hole in vertical position inculding cost of all scaffolding derricks,poles clamps embedded in foundation etc.inculding cost of all cutting ,threading and welding of pipe etc. within all lead ans lift ,complete in all respect as per the driection of Engineer -in- charge. | 37 | mtrs. | 4,900 ₹1,81,300 Lowest | 5,500 ₹2,03,500 | 5,800 ₹2,14,600 |
| 5.00 | Supply and lowering of IS marked Electric Resistance Welded MS Slotted pipe 300 mm dia nominal size housing ,8 mm thick having out side dia mtrs 323.90 mm screwed and Socked confirming to IS 4270--2001 Slot size 1.5X75 mm welded up to date ammendments.if any ,about 4 mtrs to 7 mtrs in length ,welded without any circumferential joints, into bore hole in vertical position inculding cost of all scufolding derricks,poles clamps embedded in foundation etc.inculding cost of all cutting ,threading and welding of pipe etc. within all lead ans lift ,complete in all respect as per the driection of Engineer -in- charge. | 5 | mtrs. | 5,100 ₹25,500 Lowest | 5,800 ₹29,000 | 6,300 ₹31,500 |
Tender Value
₹15.8 L
EMD Value
₹31,599
Closing Date
4 Aug 2025, 5:00 pmClosed
EE JSV Division Tissa
o/o EE JSV Division Tissa
Drilling Lowering of assembly and development of 1 No 8 bore at Kiani Near village Malan
2025_HPIPH_110881_1
EE-JSD-TSA-EA-I-2025- 1203-1253 dated- 24-07-2025
Open Tender
Civil Works
Item Rate
90 days
EE JSV Division Tissa
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
EE JSV DIVISION TISSA
₹31,599
24 Aug 2026
24 Jul 2025
5 Aug 2025
24 Jul 2025
4 Aug 2025
24 Jul 2025
Amount
Transportation of Rig along with allied acessories etc complete inculding errectiob and levelling at site through all kid of roads, approaches fields etc.complete in all respect withinall leads and lift as per the direction of Engineer in Charge.
Drilling bores of as per per specification laid down IS 2800-1991 ( part-1) with up to date ammendments,if any with percussion Rig /Direct Rotary Rig or combination drilling Rig staring with 650-600 mm dia M.S. pipe reduced to 450 -400 mm dia MS pipe confirming to IS 4270-2001 with up to date ammendements ,if any ,all kind of soils ,boulders, rocks,collapsible strata saturated soils, artesian conditions inculding the cost of all consumable , stores water,fuel,lubricants and other accessories etc. complete in all respect as per the direwction of Engineer in charge.
Drilling and lowering of MS casting pipe confirming to IS 4270-2001 with up to date ammendents, if any ,of suitable sizes as mentioned above from 0-3 mtrs below ground level within all leads and lifts.
Drilling and lowering of MS casting pipe confirming to IS 4270-2001 with up to date ammendents, if any ,of suitable sizes as mentioned above from 3-30mtrs below ground level within all leads and lifts.
Drilling and lowering of MS casting pipe confirming to IS 4270-2001 with up to date ammendents, if any ,of suitable sizes as mentioned above from 30-60mtrs below ground level within all leads and lifts.
Drilling and lowering of MS casting pipe confirming to IS 4270-2001 with up to date ammendents, if any ,of suitable sizes as mentioned above from 60-90 mtrs below ground level within all leads and lifts.
Drilling and lowering of MS casting pipe confirming to IS 4270-2001 with up to date ammendents, if any ,of suitable sizes as mentioned above from 90-100 mtrs below ground level within all leads and lifts.
Collection ,preservation and display of suitable size sample box with top lid and locking arrangement till handing over the tube well to the department complete in all respect as per the direction
Supply and lowering of IS marked Electric Resistance Welded MS pipe 300 mm dia nominal size housing ,8 mm thick having out side dia mtrs 323.90 mm bevelled edge confirming to IS 4270--2001with up to date ammendments.if any ,about 4 mtrs to 7 mtrs in length ,welded without any circumferential joints, into bore hole in vertical position inculding cost of all scaffolding derricks,poles clamps embedded in foundation etc.inculding cost of all cutting ,threading and welding of pipe etc. within all lead ans lift ,complete in all respect as per the driection of Engineer -in- charge.
Supply and lowering of IS marked Electric Resistance Welded MS Slotted pipe 300 mm dia nominal size housing ,8 mm thick having out side dia mtrs 323.90 mm screwed and Socked confirming to IS 4270--2001 Slot size 1.5X75 mm welded up to date ammendments.if any ,about 4 mtrs to 7 mtrs in length ,welded without any circumferential joints, into bore hole in vertical position inculding cost of all scufolding derricks,poles clamps embedded in foundation etc.inculding cost of all cutting ,threading and welding of pipe etc. within all lead ans lift ,complete in all respect as per the driection of Engineer -in- charge.
Providing and fixing M.S.taper /reducer as per lengths approved by the Engineer-in -Charge , materials of M.S. taper/reducer shall be equaivlent to parent pipe materials and shall confirm to chemical composition as per 4270-2001 with up to date ammendments,if any,complete in all respect as per directions of the Engineer-in -Charge.
Providing and Lowering of IS marked electrical resistance welded MS pipe 200mm dia nominal size housing 6.40mm thick heaving outside diameter 219.10 mm bevelled confirming to IS 4270-2001 with uoto date slot size 1.5 x75mm welded up to date ammendements if any about 4-7 mtrs in length welded without any circumfererincial joints into borehole in vertical position inculding cost of all scafolding derricks poles clamps embedded in foundation etc. inculding cost of all cutting threading and welding of pipe etc. within all leads and lifts ,complete in all respects as per the direction of Engineer-in- charge
Supply and lowering of IS marked Electric Resistance Welded MS Slotted pipe 200 mm dia nominal size housing ,8 mm thick having out side dia mtrs 219.10 mm screwed and Socked confirming to IS 4270--2001 Slot size 1.5X75 mm welded up to date ammendments.if any ,about 4 mtrs to 7 mtrs in length ,welded without any circumferential joints, into bore hole in vertical position inculding cost of all scufolding derricks,poles clamps embedded in foundation etc.inculding cost of all cutting ,threading and welding of pipe etc. within all lead ans lift ,complete in all respect as per the driection of Engineer -in- charge.
Providing and fixing MS centralizedd guide at suitable spacing for each tube well as per IS 226-1991 withup to date ammendents if any ,within all leads and lifts ,1x 4Nos completed in all respects as per the direction of the Engineer in charge
Supplying ,lowering and fixing in position IS marked mild steel bail plug of 200 mm/300 mm diameters with "U" hooks as per IS 2800-1991 with up to date amendements ,if any, within all leads and lifts, complete in all respects per directions of the Engineer -in- Charge.
Providing and fixing in positionthreaded iron cap with locking arrangements of approved design to prevent foreign matter from getting into bore hole as required within all lead and lift ,complete in all respect as per the direction of Engineer-in -charge
Supplying and packing of gravel, consisting of hard quartz or other suitable material with 175mm / 125mm an average specific gravity of not less than 2.5,not containing more than 2% by weight of thin flat of elangated pieces, shall be of sub rounded to rounded grains with minimum angular features of size 2-3.35 mm , shall be free from impurities such as shafe,shale,mica,felspar,clay,sand,dirt loam,haematte and organic material as pe IS 4097-1967 with upto date amendments, if any, around intake of tubewell with minium thickness of shroud around screen generally 100 mm to the entire depth of the bore as per 2800(Part-I ) 1991 with upto date amendments, if any, with in all leads and lifts complete in all respects as per direction of the Engineer -in- Charge.
Development of tubewell by back washing method ,with air compressor of minimum 750CFM capacity ,pumping pipe of 200 mm dia and air line of minimum 65 mm size or with other suitable method ,till the well is throughly developed as per clause 4.2 of IS 11189-1985 with up to date ammendments, if any ,complete in all respect as per the direction of Engineer-in - Charge.
Development of tubewell by continous over pumping method ,with VT pump/submercible pumps of suitable capacity not less than double the discharge established by the compressor method /design discharge ,untill the well is sand free as per IS -11189 -1985 up to date amendments if any complete in all respect as per direction of the Engineer-in-Charge .The drawdown and discharge to be established by running the VT / submercible pump continously for 8 hours in the presence of officer not less than the rank of Assistant Engineer.
Testing the verticality of the tube well as per clause 4.3 of iS 2800 (Part-II)1979 with up to date amendments,if any using plumb or plumber 6mm smaller in dia within the inside diamete of the well casting .The results of the verticality test shall be recorded on proforma shown in Appendix A of IS 2800 (Part-II ) 1979 with up to date amendments if any ,as appended with the tender documents and handed over complete in all respect as per the diection of Engineer in Charge.
Dismentalling of Rig or other allied accessories after completion of job within all leads & lift complete in all respect as per the direction of Engineer- in- charge .
Handling over of the tube well in complete shape as per appendex "B" of clause 7 of IS 2800 (part -II) -1979 with upto date ammendents if any ,as appended with the tender documents in laminated form,in triplicate complete in all respect as per the direction of Engineer-in charge
Ajay Kumar (BID ID -541128)
A.R ENTERPRISES (BID ID -541122)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .