Loading
Loading…
New
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹3.1 Cr
EMD Value
₹3.1 L
Closing Date
26 Sept 2024, 10:58 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Directorate of Municipal Administration
MRUTHYUNJAYA
CONSTRUCTION OF MINI TRANSFER STATIONS AND SUPPLY, INSTALLATION OF 16 CUM PORTABLE COMPACTORS ALONG WITH SUPPLY OF HOOK LOADERS WITH 28 TGVW CHASSIS AT ZONE 5 LIMITS OF MCC
DMA/2024-25/PM/WORK_INDENT24635
DMA/2024-25/PM/WORK_INDENT24635
Open
Plants and Machinery
Two Tender Document System(Two Cover)
DMA City Corporation Mysuru
4 documents required · 0 mandatory · 4 optional
List of works for which tenders already submitted
Banker Details for reference
Similar type of Work done certificate or Performance certificate (Construction of transfer station and Supply of Portable compactor and Hook Loaders) issued by competent authority not below the rank of Executive Engineer for value not less than 247.936 in a single work.
Bidder Must submit valid ISO 9001certificate
Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded
Tenderer or his identified Sub Contractor should possess valid PWD license for executing Civil works
Bidder should not have been withdrawn due to delay in the delivery in the last 3 years by any Government department
The manufacture should certify that they will supply spares and render services for the offered equipments for Minimum period of 10 Years from the date of supply
Notary affidavit for not black listed from any Govt offices/institutions/or PSUs or from any Govt agencies
Local Service Center details ( Relevant documents of local service support in Karnataka)
The tenderer should be a manufacturer who must have manufactured, tested and supplied the equipment (s)similar to the type specified in the Schedule of Requirements up to at least 100 % of the quantity required in any one of the last 3 years. The equipments offered for supply must be of the most recent series models incorporating the latest improvements in design. The models should have been released on or after1/7/2021 and be in satisfactory operation for 24 months as on date of tender opening
Tenders of tenderers quoting as authorized representative of a manufacturer, meeting with the above requirement in full, can also be considered provided the manufacturer furnishes authorization in the prescribed format assuring full guarantee and warranty obligations as per GCC and SCC and the tenderer, as authorized representative, has supplied, installed and commissioned satisfactorily at least 100% of the quantity similar to the type specified in the Schedule of Requirements in any one of the last three years which must be in satisfactory operation for at least 24 months on the date of tender opening
Technically qualified bidder should arrange for the Demo of Similar equipment mentioned in the tender document within 7 days from the date of intimation by MCC to Qualify Further
Must Submit PAN and GST certificates
Tenderer must submit unconditional Line of credit for Rs92.97 lakhs
Tenderer must submit unconditional Line of credit for Rs92.97 lakhs
To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e. 2019-2020 to2023-2024) achieved in at least two financial years a minimum financial turnover of 619.84 Lakhs
₹5,000
₹3.1 L
21 Aug 2024
21 Aug 2024
27 Sept 2024
27 Aug 2024
28 Aug 2024
SUPPLY INSTALLATION AND COMMISSIONING OF EQUIPMENTS AND MACHINARIES FOR 16CuM CAPACITY TRANSFER STATION WITH SHED CONSTRUCTION IN ZONE-05 LIMITS
Supplying Installation commissioning and successful trail run of 16Cum Portable Compactor with tipcart mechanism
Truck Mounted Hook Loader (Prime Mover) on 28T GVW truck Chasis to carry fully loaded 16Cum Portable Compactor Including transporation comprehensive Insurance registration as per prevailing norms
Earth work in surface excavation for stripping, seating of bund, Road way, by manual means for lowering & leveling the ground for all works other than foundation & depth in all kinds of soil not excee...
Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and te...
Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, to...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...
Providing and laying in position cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...
Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 ...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...
Flooring with 25mm thick polished shahabad slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid tonline and level and jointed with cement slurry mixed with p...
Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mor...
Providing 15 mm cement plaster on the rough side of single or half brickn wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and remov...
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, e...
Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed t...
Providing & fixing of 2.5 track x 2-panel sliding windows made out of multi chambered UPVC Sections and with minimum TiO2 at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour...
Providing and fixing M.S. grills of required pattern in frames of win- dows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to ope...
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...
Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound) content less than 50 g/L, of approved brand and manufacture, including applying additional coats wherever requir...
Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @ 0.80 ltr/10 m² of approved brand and manufacture i...
Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Pr...
Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on spec...
Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approv...
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 g...
Providing and fixing white vitreous china water closet squatting pan (Indian type) : Long pattern W.C. pan of size 580 mm
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and ...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe wi...
ABC Stored Pressure Type FIRE EXTINGUISHER:IS 15683:2006- Attack Fire 9KG
Electrification 11.5%
Water Supply & Sewarage 10.5%
CCTV surveillance&GPS for vehicle: Comprising of twi IT Based Camaras with night visoin capability, UPS, NVR, Data Transmission to centralised facility (QUOTATION RATE APPROVAL DATA)
DIESEL GENERATOR SET Diesel Generator 15KVA 12kw
GST AT 18% FOR CIVIL WORK FOR MACHINARIES IT IS INCLUDED IN THE ESTIMATED COST
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
Transfer station bid document Zone 5.pdf
Tender Document • 1.07 MB
KW2 Zone 5.pdf
Tender Document • 0.49 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .