SPECIAL REPAIRS TO HIGH MAST LIGHTS AND STREET LIGHTS ALONGWITH POLES AND CONNECTED ITEMS AT MCEME UNDER GE MCEME SECUNDERABAD

Taking down, transport to workshop , Re-winding of electric motor 3 phase including bearings etc and installed in highmast pole of capacity upto 1.5/2 HP and refixing of the same including necessary arrangement complete all as directed

Supply only steel wire rope 4/6mm dia suitable for highmast system including u bolt complete all as directed

Supply and fix to timer switch Digital type 24 hours , 15 to 40 Amp contact rating 230 volts AC 50 Hzs suitable for street lights and all as specified and directed by Engr in charge.

Supply and fixing in repair 3 pole power contactor type ML 3 AC 3 rating 15 to 40 Amps Aux Contactors 2NO+2NC compatible with digital timer of suitable capacity complete all as specified and directed by Engr in charge.

Material and labour for replacement of unserviceable street light bracket made out of GI pipe 1.2 mtr long 32 to 50mm dia suitable for street light fitting, light grade bent to shape as directed including nut, bolts, washer and MS flat iron clamp of required size for fixing bracket suitable for PCC/ steel tubular poles all as directed incl taking down of old unsv bracket.

Taking down existing LED street / flood light fitting Item from any height of poles including high mast poles etc and electrical connections and taking down of existing unserviceable fitting all as specified and directed.

Supplying, installation, Testing & Commissioning of Street light LED fixture powder coated pressure die cast aluminium body with driver as per the requirement with, Input voltage: 140-270 Volt AC, frequency 50/60 hz, Operating temp range -10 0C to +35 0C, powdered by built - in potted LED Driver (SMPS based constant current supply ) with lower THD, Output open / short circuit protection internal surge protection of 4 KV,THD < 10%, System lumen efficacy ≥100 lm/Watt output, Lumen efficiency of LED ≥ 120 lm/W of 60 Watt LED street light fitting of minimum 50000 Burning Hours in all respect i/c external connections with 1.5 sq.mm FRLS/ PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 2 year of warranty suitable to fit in up to 32 to 50mm dia pipe as directed by Engineer-in-Chanrge Make : Havells Cat No. ENDURASUNDOWNNXTSL60WLEDCWPASYBOPC or an equivalent model in CG / Philips

Supplying, installation, Testing & Commissioning of Street light LED fixture powder coated pressure die cast aluminium body with driver as per the requirement with, Input voltage: 140-270 Volt AC, frequency 50/60 hz, Operating temp range -10 0C to +35 0C, powdered by built - in potted LED Driver (SMPS based constant current supply ) with lower THD, Output open / short circuit protection internal surge protection of 10 KV,THD < 10%, System lumen efficacy ≥100 lm/Watt output, Lumen efficiency of LED ≥ 120 lm/W of 70 Watt LED street light fitting of minimum 50000 Burning Hours in all respect i/c external connections with 1.5 sq.mm FRLS/ PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 2 year of warranty suitable to fit in up to 32 to 50mm dia pipe as directed by Engineer-in-Chanrge Make : Havells Cat No. ENDURASUNDOWNNXTSL70WLEDCWPASYBOPC or an equivalent model in Wipro / Philips

Supplying, installation, Testing & Commissioning of Street light LED fixture powder coated pressure die cast aluminium body with driver as per the requirement with, Input voltage: 140-270 Volt AC, frequency 50/60 hz, Operating temp range -10 0C to +35 0C, powdered by built - in potted LED Driver (SMPS based constant current supply ) with lower THD, Output open / short circuit protection internal surge protection of 10 KV,THD < 10%, System lumen efficacy ≥100 lm/Watt output, Lumen efficiency of LED ≥ 120 lm/W of 90 Watt LED street light fitting of minimum 50000 Burning Hours in all respect i/c external connections with 1.5 sq.mm FRLS/ PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 2 year of warranty suitable to fit in up to 32 to 50mm dia pipe as directed by Engineer-in-Chanrge Make : Havells Cat No. ENDURASUNDOWNNXTSL90WLEDCWPASYBOPC or an equivalent model in Wipro / Philips/CG

Supplying, installation, Testing & Commissioning of Street light LED fixture powder coated pressure die cast aluminium body with driver as per the requirement with, Input voltage: 140-270 Volt AC, frequency 50/60 hz, Operating temp range -10 0C to +35 0C, powdered by built - in potted LED Driver (SMPS based constant current supply ) with lower THD, Output open / short circuit protection internal surge protection of 10 KV,THD < 10%, System lumen efficacy ≥120 lm/Watt output, Lumen efficiency of LED ≥ 120 lm/W of 100 Watt LED street light fitting of minimum 50000 Burning Hours in all respect i/c external connections with 1.5 sq.mm FRLS/ PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 2 year of warranty suitable to fit in up to 32 to 50mm dia pipe as directed by Engineer-in-Chanrge Make : Havells Cat No. ENDURASUNDOWNSL100WLED765PASYBOPC or an equivalent model in Wipro / Philips/CG

Supplying, installation, Testing & Commissioning of Flood light LED fixture powder coated pressure die cast aluminium body with driver as per the requirement with, Input voltage: 140-270 Volt AC, frequency 50/60 hz, Operating temp range -10 0C to +50 0C, powdered by built - in potted isolated electronic LED Driver (SMPS based constant current supply ) with lower THD, Output open / short circuit protection internal surge protection of 4 KV,THD < 10%, System lumen efficacy ≥120 lm/Watt output, Lumen efficiency of LED ≥ 140 lm/W of 100 Watt LED flood light fitting of minimum 50000 Burning Hours in all respect i/c external connections with 1.5 sq.mm FRLS/ PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 2 year of warranty as directed by Engineer-in-Chanrge Make : Havells Cat No. JETALEGANZAFLS100WLED757P60DTOTG or an equivalent make in Wipro / Philips/CG

Supplying, installation, Testing & Commissioning of Flood light LED fixture powder coated pressure die cast aluminium body with driver as per the requirement with, Input voltage: 140-270 Volt AC, frequency 50/60 hz, Operating temp range -10 0C to +50 0C, powdered by built - in potted isolated electronic LED Driver (SMPS based constant current supply ) with lower THD, Output open / short circuit protection internal surge protection of 4 KV,THD < 10%, System lumen efficacy ≥120 lm/Watt output, Lumen efficiency of LED ≥ 140 lm/W of 120 Watt LED flood light fitting of minimum 50000 Burning Hours in all respect i/c external connections with 1.5 sq.mm FRLS/ PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 2 year of warranty as directed by Engineer-in-Chanrge Make : Havells Cat No. JETALEGANZAFLS120WLED757P60DTOTG or an equivalent make in Wipro / Philips/CG

Supplying, installation, Testing & Commissioning of Flood light LED fixture powder coated pressure die cast aluminium body with driver as per the requirement with, Input voltage: 140-270 Volt AC, frequency 50/60 hz, Operating temp range -10 0C to +50 0C, powdered by built - in potted isolated electronic LED Driver (SMPS based constant current supply ) with lower THD, Output open / short circuit protection internal surge protection of 4 KV,THD < 10%, System lumen efficacy ≥120 lm/Watt output, Lumen efficiency of LED ≥ 140 lm/W of 150 Watt LED flood light fitting of minimum 50000 Burning Hours in all respect i/c external connections with 1.5 sq.mm FRLS/ PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 2 year of warranty as directed by Engineer-in-Chanrge Make : Havells Cat No. JETALEGANZAFLS150WLED757P60DTOTG or an equivalent make in Wipro / Philips/CG

Supplying, installation, Testing & Commissioning of Flood light LED fixture powder coated pressure die cast aluminium body with driver as per the requirement with, Input voltage: 140-270 Volt AC, frequency 50/60 hz, Operating temp range -10 0C to +50 0C, powdered by built - in potted isolated electronic LED Driver (SMPS based constant current supply ) with lower THD, Output open / short circuit protection internal surge protection of 4 KV,THD < 10%, System lumen efficacy ≥120 lm/Watt output, Lumen efficiency of LED ≥ 140 lm/W of 200 Watt LED flood light fitting of minimum 50000 Burning Hours in all respect i/c external connections with 1.5 sq.mm FRLS/ PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 2 year of warranty as directed by Engineer-in-Chanrge Make : Havells Cat No. JETALEGANZAFLS200WLED757P60DTOTG or an equivalent make in Wipro / Philips/CG

All as above item No 16, but 16 sqm 4.0 core.complete all as specified and as directed.

All as above item No 16, but 35 sqm 4.0 core.complete all as specified and as directed.

Taking down Unsv UG cable any size/ type complete all as specified and directed.

Taking down damaged Unsv conductor any type and removal complete all as specified and directed.

S&F in replacement of PVC insulated multi core round stranded copper conductor (Flexible) 3 core of size 1.5 sqmm 1100 volts grade heavy duty including all accessories complete

S & F in replacement of Pole mounted junction box of size 200 x 140 x 95 mm outdoor type fixed with Aluminium Strip of Size 20 x 3mm - 2 No and 6 amp MCB SP complete incl fixing arrangements with suitable size clamps, nut & bolts for fixing on pole all as specified and directed. Make Syntex Catpart No GS-JB-2014 and equivalent make of Hansel

Supply & fixing in replacement of automatic street light switch using Nature Switch for automatic switching of street lights based on LUX level of natural light the sensor (nature switch) along with suitable power contactors and MCBs (Input-output) should be enclosed in pole/wall mountable enclosure made of rust proof, Electric shock proof, termite proof and FR grade SMC junction box (sintex make) conforming to IP 54.the contactor,MCBs and copper circuit wiring (min.10sqmm) should enough to take: three-phase load of 12-15KW;contactor Rating 32Amps; MCB(spn) Rating 32Amps. Healer Enterprises Model no SWADEEP-02EC12KW3P or equivalent in Seimens and Havells.

Supply & fixing in replacement of automatic street light switch using Nature Switch for automatic switching of street lights based on LUX level of natural light the sensor (nature switch) along with suitable power contactors and MCBs (Input-output) should be enclosed in pole/wall mountable enclosure made of rust proof, Electric shock proof, termite proof and FR grade SMC junction box (sintex make) conforming to IP 54.the contactor,MCBs and copper circuit wiring (min.6sqmm) should enough to take: three-phase load of 8-11KW;contactor Rating 20Amps; MCB(spn) Rating 20Amps. Healer Enterprises Model no SWADEEP-02EC8KW3P or equivalent in Seimens and Havells.

Supply & Erecting Steel Tubular Swaged Pole Type 410-SP-31 (9.0 METRE long) including Cast Iron Base Plate, Finial Taper Plug, Cap, Mild Steel Bolts, Nuts, Screws including applying Two Coats of Black Bituminous Paint Internally and Externally upto Planting Depth and applying with Two Coats of Aluminium Painting over a Coat of Aluminium Primer (Externally from Top of Coping) complete all as specified and as directed.

Taking down old Unsv PSC pole of any size from foundation and shifted to MES store yard complete all as specified and directed by Engineer-In-Charge.

M & L for cutting of road, hard standing made of concrete or premix carpet, WBM, soiling and morrum filling including excavation for laying of cable/pipe all as directed and making good the road/hard standing by using all old/new materials and with PCC (1:2:4) etc, required to match with the existing surface complete all as specified and directed.

S&F in replacement of GI pipe light grade 40mm bore for cable protection complete all as specified and directed.

Excavation in trenches not exceeding 1.5M wide and not exceeding 1.5M in depth and getting out in hard/dense soil for laying of under ground cable all as directed.

Excavation of trenches in any type of soil n.exc 1.5 M wide and n.exc 1.5 M in depth for taking out / laying of cable/pipe and getting out forming bottom surfaces to required gradients complete all as specified and as directed.

Returning filling in including spreading, leveling watering and well ramming in layer not exceeding 25 Cms.complete all as specified and as directed.

Removal of excavated surplus soil not exceeding 50 m and depositing where directed at al level not exceeding 1.5 m above the starting point.complete all as specified and as directed.

Supply and spreading sand in trenches as cushioning to under ground cable on top and bottom of cable all as specified.

Supplying and laying dry bricks in trenches over under ground electric cable for mechanical protection with width equal to length of bricks with well burnt sub class ‘B’ old size bricks laid flat complete all as specified and as directed..

M& L for cement concrete in foundation, filling concrete for poles of type D-2 1:4:8 using 40 mm graded aggregate all as specified and directed.

M& L for cement concrete type C-1 1:3:6 using 20 mm graded aggregate for coping/road finishing / foundation etc.complete all as specified and as directed.

Supplying and fixing 1100 volts grade heavy duty cable PVC insulated aluminium conductor of size 6 Sqmm 2 core, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspen- ded by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular complete all as specified and directed at site.

Supplying and fixing 1100 volts grade heavy duty cable PVC insulated aluminium conductor of size 10 Sqmm 2 core, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspen- ded by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular complete all as specified and directed at site.

Supplying and fixing 1100 volts grade heavy duty cable PVC insulated aluminium conductor of size 16 Sqmm 2 core, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspen- ded by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular complete all as specified and directed at site.

M&L for cleaning thoroughly street light steel poles of any height and any description (Maximum 9 Mtr long) with necessary cleaning agent including scrapping of old corroded paint dirt/ rust carefully and applying two coats aluminium paint including marking of pole numbers etc all as epecified and directed.

Supply and fix in replacement of MCB SP 6 to 32 Amp 10 KA C Curve complete all as specified and as directed.

Supply and fix in replacement of MCB SPN 32 to 40 Amp 10 KA C Curve complete all as specified and as directed.

Supply and fix in replacement of MCB TPN 40 to 63 Amp 10 KA C Curve complete all as specified and as directed.

Please Enable Macros to View BoQ information