Installation of Hi must or small must light at ward number 32 Gowri Kaluve in front of Vijaya Ganpati Temple, in front of Muhammadiya masjid, near Bull factory, ramanahalli channel road in front of Mill, near shaneshwara Swamy Temple in CMC limit

Installation of Hi must or small must light at ward number 32 Gowri Kaluve in front of Vijaya Ganpati Temple, in front of Muhammadiya masjid, near Bull factory, ramanahalli channel road in front of Mill, near shaneshwara Swamy Temple in CMC limit

Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawi...

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggre...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant...

Cutting Asphalt /Concrete road surface using machine cutter for leakage pit with earth work excavation in all classifications of soil including all lead and lifts bailing out water with pumps includin...

HDPE pipe grade PE100-PN 3.0, 75mm (245) ---- electrical work

1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975. (KPWD S...

Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using wooden/ Aluminum Rollers as directed by the departmental staff LT Cable ,2.5 to 25 Sqmm (KPWD SR KPTCL VOL-6 2023-24 Item no...

Fabricating, supplying and erection of 8 Mtrs long hot dip Galvanized Octagonal pole with BSEN 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate with door opening arrangements, inclu...

Supplying, and fixing of Hot dip Galvanized M.S.Bracket suitable for out door luminaries and mounted on Octagonal pole using necessary bolts, nuts etc., completeSingle Arm Bracket with 1000 mm Standar...

Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for work...

Supply of LED floodlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation.Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycar...

Fixing halogen/metal halide / SVL / IL / LED floodlight fitting over existing pole / wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires. ---- electrical work

Supply and Installation /Fixing /Provision of Outdoor type Thermoplastic Modular Panel enclosure with transparent Poly carbonate Lid, shock proof, IP65 (Weather Proof), rust proof, dust proof, water p...

Supplying and fixing angle iron frame work fabricated out of M.S.angle iron.. And M.S.Flat...... With bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint 40...

Supplying and fixing Microprocess or Based Astronomical timer Switch with using necessary bolts, nuts and washers. ---- electrical work

Supply and fixing of 4pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per IS-13947. 50 A --...

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking ca...

Supplying & fixing of Porcelain fuse channel with cutout on existing wooden/panel using necessary nuts, bolts and washers. 63A ---- electrical work

Earthing: Providing and fixing and wiring earth electrode for grounding circuits IC cutouts and other equipments on the meter board in the pit. The pits should be filled up with equal proportion of sa...