COMPREHENSIVE REPAIR MAINT TO CERTAIN BLDGS OF OTM ACCN IN AOR OF AGE B/R-I UNDER GE(WEST)PATHANKOT

Amount

Taking down chowkats or frames including shutters (without taking off shutters from the frame) not exc. 1.5 Sqm each, complete all as specified & directed.

Taking down chowkats or frames including shutters (without taking off shutters from the frame) exc. 1.5 Sqm but n exc 4.0 sqm each, complete all as specified & directed.

Taking down shutters of any description exc. 1 sqm and not exc. 2 Sqm each, complete all as specified & directed.

S & F Pressed steel frames of size 125mmx60mm made of 1.25mm thick MS sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate.incl tarring/black bituminous paint to unexposed surface, complete all as specified & directed. Note : PCC for filling of hollow portion shall be measured and paid for separately.

S & F Pressed steel frames of size 105mmx60mm made of 1.25mm thick MS sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate incl tarring/black bituminous paint to unexposed surface, complete all as specified & directed. Note : PCC for filling of hollow portion shall be measured and paid for separately.

S & F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.

M&L for PCC 1:3:6 nominal mix, type C-1 using 20 mm graded crushed stone aggregate as in filling of pressed steel door frames/chowkats, complete all as specified & directed.

M&L for 35mm thick 2nd class hard wood (Sal/Hollock), glazed and skeleton shutters (factory made), open rebated and prepared to receive glass or gauge etc., (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc., size of members of shutters as specified in clause 8.24 (a) of SSR Part-I, complete all as specified & directed.

M&L for 35mm thick factory made 2nd class hard wood (Sal/ Hollock) plain, framed, panelled shutters (two panels) with lock rail and panels of 9mm B.W.P. commercial ply or 12mm veneered particle board with commercial face veneers on both sides.The size of rail and style as per IS–1003 (Part-I), kiln seasoned and chemically pressure treated, fitted to chowkats, complete all as specified & directed.

S&F factory made 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides

M&L 35 mm thick single piece factory made wire gauge door shutter and incl of wire cloth ( steel & aluminium XPM) manufacturing by PVC sheets printed 5 mm thick on both side on frame made out of M.S. tube 19 SWG, size 19x19 mm complete in all respect with lock rail & beautified by PVC beading all around fixed with PVC solvent cement.complete all as specified and directed.

S&F in repair Steel window/ventilator factory made, made out of mild steel box type and shutter suitable for double shutter i.e. Glazed and gauged shutter. Glazed shutter made out of hollow' section with sash bar and gauged shutter made out of hollow section without sash bar including hinges, tower bolt, handle, grill 10 mm sq bar including two coat of synthetic enamel paint over one coat of red oxide primer, tarred hold fasts, PCC bed blocks for fixing hold fast, including plain/figured glass 3mm thick and stainless steel wire cloth 0.36mm nominal dia of wire & average width of aperture 1.18mm & fixed with stainless steel wire staples`etc complete all as specified and directed.

Providing and fixing factory made uPVC white colour Sliding window of area not exc 2 sqm each , Two track made of extruded profiles with wall thickness of 2.3mm (+- 0.2mm). Window profile with hollow section with multi chamber, Frame (60mm x 62mm). sash (42mm x 67mm). Sliding Interlock (One vertical length in each shutters) (45.5mm x 28mm). Glazing bead (24.5mmx 16mm) will he mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc.. making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel frame (30mm x 21.5mm), Sash (30mm x 18mm), profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners. Hardware : [Touch Lock of zinc alloyed (white powder coated), steel roller system including 5mm thick glazing with Heat absorbing glass incl Solar control film 25 micron reflective type, aluminum track on bottom rail for two track sliding frame, wool pine for Sliding sash and interlock.] incl fixing of MS grill in the opening with suitable arrangements fixing with PCC 1:2:4 (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose)

M&L for Mild steel Framed work in repair such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified incl dismantling of existing frame work.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site complete all as specified and directed by Engr-in-Charge.

S&F Aluminium alloy, anodised, sliding door bolt 300 mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or castaluminium alloy and fixed . complete all as specified and directed.

S&F Aluminium, anodised, barrel tower bolts 150 mm of extruded section and fixed. complete all as specified and directed.

S&F Aluminium, anodised, handles 125 mm of extruded section and fixed.complete all as specified and directed.

S&F Mild steel, 300mm, ordinary rat tail rod patttern springs includding roller and roller plate complete fixed with screw or necessary welding to pressed steel door frame.

S&F Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with statinless steel wire staples.

Hacking out old broken glass (any thickness, size, quality or description) from matel frame including punching or drilling out old glazing pins/spring clips and providing and fixing new onces exc 1.5 Sqm

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square not exc. 0.5 sqm in each pane , complete all as specified and directed.

S&F 3mm thick figured glass, pin head type and glazing with oil putty or wooden beads in square n.exc 0.5 sqm each complete all as specified & directed.

S&F "as in repair" 25mm outer dia stainless steel decorative drapery rod of thickness 20 guage with stainless steel brackets near to ends with stainless steel funnels with adopter for 25 mm dia drapery rod at both ends complete all as specified and directed.

M&L for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement incl dismantling of existing railing of any type and description complete all as specified and directed.

Taking down, easing and adjusting shutters of any description, exceeding. 1.00 Sqm and not exceeding 2.00 Sqm each and re-fixing in the same or other opening completa all as specified and directed.

Demolition of brickwork or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc., but excluding ashlar facing, dressed stone work and precast concrete articles, complete all as specified & directed.

M&L for Brickwork with Fly Ash Bricks (old size), straight or curved on plan exceeding 6 metre mean radius built in cement sand mortar 1:6 complete all as specified.

M&L burnt clay brick work with sub-class 'B' bricks,(old size) straight or curved on plan exc 6 m mean radius built in cement mortar 1:4 complete all as specified and directed.

M&L for except brick of any description in CM 1:6. complete all as specified.

S & F in repair Concealed Stop valve (ISI Marked), cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 15 mm bore and fixed.

S & F in repair Bib tap 15 mm bore, Brass CP, fancy type with crutch or butterfly handle screwed down screwed for iron/PVC pipe or for brass ferrule and fixed, complete all as specified.

S & F in reapir Bib tap 15 mm bore, Brass CP, with crutch or butterfly handle screwed down screwed for iron/PVC pipe or for brass ferrule and fixed, complete all as specified.

S & F in reapir Stop valve /Angle valve (ISI Marked), fancy type, chromium plated with long shank and cup screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron /PVC pipe or for unions of 15 mm bore andcomplete all as specified.

S & F in repair brass Chromium plated shower roses 125 mm size with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and as directed.

S&F in repair Soap dish, any type, fixed to plugs with chromium plated brass screws complete.

S&F in repair, Vitreous china squatting pan of pattern, long pan, 'Orissa pattern', size 580 x 440 mm white with integral foot rests (excl flushing cistern and flush pipe) but including provision concrete bedding CI floor trap etc complee

S&F in reapir , Vitreous china wash down water closet pan (Pedestal pattern) white (excl fixing bolts, flushing cistern and flush pipe) but including plastic water closet seat, white, closed pattern with flat bottom and cover and mild steel CP or aluminised hinging device.

S&F in repair floor mounting single piece Vitreous china wash down water closet pan , light colour complete including fixing to trap , alongwith PP soft close seat cover, hinges and accessories complete all as specified and directed.

S&F in repair CP Brass Hand Shower (Health Faucet) with 8 mm dia,1.2 m long Long Flexible Tube Chrome Finish & Wall Hook for Water closet complete all as specified and directed.

S&F in repair CP brass towel ring 20mm dia, fancy type, superior quality, fixed with and including chromium plated screws and wooden/plastic cleats complete all as specified and directed.

S&F in repair chromium plated brass central hole single lever WHB Mixture 15 mm bore for mixing hot and cold water with 450 long braided house 20 cartriage size screwed down, high pressure screwed for iron pipe complete all as specified and directed.

S&F in repair 3-in-1 wall mixture with telephonic shower for 15 mm bore pipe, cast copper alloy chromium plated complete all as specified and directed.

S&F in repair PVC flushing cistern 10 ltr capacity incl PVC connection inlet and and outlet connections,brackets, PVC flush pipe with bend 32 mm dia of suitable length including making necessary connections to water supply pipe line and jointing to WC all as specified and directed.

S&F in repair sink with drainage board made of stainless steel 1 mm thick with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets of angle iron and connecting union to pipe over all size 915 mm x460 mm and bowl size 410mmx330mmx 160mm complete all as specified and directed.

S&F in repairs Vitreous china wash basin, flate back white of,size 550 x 400 mm, including cutting for and pinning in ends of brackets or erecting stand including 32 mm bore CP waste pipe long screw thread and 32 mm dia flexible waste pipe complete all as spd and directed.

S&F ,Vitreous China Urinal, Half stall type, white including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, , flush pipe, grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) fixed incl supply and fixing of CP coupling, waste pipe and cp brass spreder all necessary fittings, complete all as specified and directed.

S&F PVC connection 15 mm bore with PTMT nuts of length 450 mm long.

S&F in repair glass corner shelf quarter round with CP Brass Bracket, complete all as specified and directed.

S & F in repair gun metal, gate valves suitable for 20 mm bore iron pipe, cast copper alloy, screwed down, high pressure, with wheel head/butterfly handle, screwed both ends for iron pipe or for unions.

S & F in repair gun metal, gate valves suitable for 15mm bore iron pipe, cast copper alloy, screwed down, high pressure, with wheel head/butterfly handle, screwed both ends for iron pipe or for unions.

Dismantling floor, hearth or wall tilling and terrazo topping incl cement mortar bedding ( but not backing) removing serviceable tiles to stores and rubish off the premises

M & L for Non skid ceramic jointless coloured tiles, 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.11 sqm but nexc 0.18 sqm in floor etc set & jointed in neat cement slury & pointed in white or coloured cement mixed with pigment to match over and including 15mm thick screed layer in cement mortar 1:6, complete all as specified and directed .

M & L for Glazed ceramic coloured tiles of size 450mmx350mm, thickness 7mm as in vertical surfaces such as skirting, dado, wall etc., set and jointed in neat cement slurry and pointed with coloured cement to match over and including 10mm thick rendering in cement mortar 1:4, complete all as specified & directed.

M & L for Vitrified light shade ceremic tiles 600mmx600mmx 8.5 mm thick (Square/rectangular) polished in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 15mm thick screed bed in cement mortar 1:6, complete all as specified & directed.

M & L for Vitrified light shade ceremic tiles 600mmx 600mmx 8.5 mm thick (Square/rectangular) polished area of each tile not exceeding 0.36Sqm in skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 10 mm thick rendering in cement mortar 1:4, complete all as specified & directed.

Taking down cement plaster/ including backing etc from brick/stone walls / concrete surfaces including raking out joints, hacking for key , scrubbing down with water etc complete all as specified and directed

M & L for Rendering 5 mm thick in cement mortar 1: 3 on concrete surfaces as in ceilings finished even and smooth without using extra cement, complete all as specified.

M & L for Rendering 15 mm thick on other than fair faces of brick work or concrete surface in CM 1:6, finished even and smooth without using extra cement.

M&L for 15mm thick rendering in two layers (5mm thick in CM 1:4 over 10mm thick in CM 1:6) on fair faces of brick work and concrete surfaces of wall, finished the surface even and smooth without using extra cement, mixing and including WPC @ 200ml/bag of cement, complete all as specified and directed.

M & L for Preparation of newly plastered surface of wall and applying two coat of oil bound distemper, white or tinted shade with and including priming surface with chalk whitening , complete all as specified.

M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces.

M&L for preparing newly plastered surfaces and applying three coats of white wash as in ceiling etc.

M & L for Providing and fixing 10mm thick plaster of paris ceiling (Gypsum anhydrous) to flat /curved surface with or without any sunk or raised mouldings as per requirements incl 2nd class soft wood fillets, or metal frame work and reinforced with G.I. wire mesh complete all as specified and directed.

M & L for repairing of chajjas,beams, roof projections and faces of exposed reinforcement surfaces or damaged loose RCC surfaces including dismantling of old loose concrete or plaster by applying one coat of cement slurry @ 3kg/sqm and filling with cement concrete 1:2:4 type B-0 (using 12.5 m graded crushed stone aggregates) mixed with liquid water proofing compound (as per manufacturer's instructions) and finished with 05 mm thick rendering with cement sand mortar 1:3 with water proofing compounds (as per manufacturer's instructions) and finally applying two coats of exterior grade emulsion paints(weather proof/weather coat) with out any brush marks on the surface in any colour over and incl one coat of primer incl necessary scaffoldings upto four storeys height of bldgs.All painted areas site to be cleaned and handover as earlier without any extra cost to Govt complete all as spd and directed.

Dismantling timber scantlings 40 sq. cm and over in section, in framed work and in any position

S & F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified and directed.

S&F rolled mild steel roof truss (framed), trussed, purlins, crane gantries, rails and fastenings and heavy brackets framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming to Fe-290 Gde E-165 .and applying two coat of synthetic enamel paint over a coat of red oxide primer on exposed surfaces complete all as specified and directed.

M&L prepration of New or previously untreated steel surfaces of any description, not other wise described over 10 cm width or girth and applying one coats of synthetic enamel paint over a coat of red oxide zinc chromate primer complete all as specified.

Dismantling of plain or corrugated AC sheeting, any gauge, thickness, including ridge etc as in roof covering.

S & F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550Mpa as in Ridge/roof covering , fixed with self tapping screws as specified.

S & F Pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and directed incl taking down existing sheet of any type and descriptions.

Racking out of existing pointing to brick tiles built in Cement mortar , laid flat, in floor, roofs, etc not less than 12 mm deep including washing the joints rubbish off the premises and keeping the surface to be wet prior to repointing complete all as specified and directed.

M & L for flush pointing in cement mortar 1:3 incl liquid water proofing compound @ 200 ml per bag of cement to brick tiles laid flat at roof complete all as spefified and directed.

M&L for 18-20mm thick granite (pure black) work (table rubbed and polished) in steps, jambs pillars, window cills ,cooking platform and like including pointing in white cement (1:2) using marble dust with admixture of pigments to match with shade or granite over including 15mm thick screed bed or bedding layer in cement mortar 1:6 etc complete all as specified and directed.

M & L for Machine cut kota stone slab flooring 18-20 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing over 20 mm thick screed bed in cement and sand mortar 1:6 complete all as specified.

M&L for Machine cut Kota stone slab not less than 16mm thick as in riser of steps, skirting, dado and pillar laid over & including 10 mm thick screed base in CM 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, grinding and polishing to yield mirror finish with machine, complete all as specified.

M&L for False ceiling of 9.5mm thick gypsum tiles (600x600mm) laminated with PVC film on the face side & metalised polyester film on the back side with all four edges sealed with PVC film (shade either plain white or crack) fixed using T grid/Cross-T/Wall angle/level clip & suspenders of standard galvanised sections in a grid size of 600x600mm, including taking down existing ceiling board & grid work etc of any type/pattern complete all as specified and directed.

M & L for 5mm thick Coloured/ printed PVC Wall Lining (panel type) consisting of 5mm thick Plain colour PVC sheet panels of size 3000mm in length and 250 mm in width having wt 360 gms fixed to wall using screw in method as per specifications and drawing at site incl fixing of 3mm thick PVC sheet fillet/mouldings of width upto 25mm above PVC wall lining work, complete all as specified and directed incl taking down existing lining of any description complete all as specified and directed.

S&F in repair for Gypsum ceiling board 595 x 595 x 9.5mm including replacement of unserviceable line wire with 4 mm dia incl repairing/realignment of Grid of any description complete all as specified and directed.

M & L for 12 mm thick Seamless calcium silicate ceiling made out of 1800 x 1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre, including finshing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seam less finish incl dismantling boarding any type fixed in any position with nails complete all as specified and directed. (Frame work for ceiling shall be measured and paid separately).

S & F Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre.

Demolition of cement concrete (unreinforced) etc in ground floors and pavings n exc 15 cm thickness (below or above ground level)

M & L for Chequered cement concrete tiles 20cm x 20cm x 25mm thick,with grey cement and no pigments set, jointed and pointed in neat cement slurry in floors incl 20 mm thick screed bed in cm 1:6 complete all as specified and directed.

M & L for PCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed.

M&L for 75 mm thick cement concrete type C-2, 1:3:6 (40mm graded crushed stone aggregate) as in Sub-base to floor finishes.

M&L for 75 mm thick cement concrete 1:3:6, type C1 (using 20mm graded crushed stone aggregate) as in plinth protection finished even and smooth without using extra cement.(incl necessary joint filling with mixture of paving bitumen & sand in 1:3)

Demolition of cement concrete (reinforced) of any description and in any position not specifically provided for complete all as specified and as directed.

M&L for Reinforced cement concrete (Nominal mix), type B-1, 1:2:4, (using 20mm graded crushed stone aggregates) in slabs supported on walls beams, columns etc all as spd and directed.

Use and waste of formwork to soffits of concrete fair finished surfaces of suspended slabs such as roof slab,floor slabs landings and similar works not exc 200 mm thk complete all as spd.

M&L for TMT bars10 mm dia and over, cut to length, bent to shape required, including cranking,bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed)not less than 0.9mm dia all as specified.

Note:-The accepted amount will be arrived after deducting the Sch of credit i.e. Rs 91,770.00 and any other reduction if any from quoted amount.

M/S RUDRA CONSTRUCTION CO (BID ID -3191201)

Dhani Builders (BID ID -3197124)

M/S Raghuvanshi Builders (BID ID -3197077)